linux/drivers/gpu/drm/nouveau/nouveau_connector.c
Ben Skeggs b30083bdb9 drm/nouveau: report unknown connector state if lid closed
This is in preference to disconnected.  If there's no other outputs
connected this will cause LVDS to be programmed even with the lid
closed rather than having X fail to start because of no available
outputs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:44 +10:00

882 lines
24 KiB
C

/*
* Copyright (C) 2008 Maarten Maathuis.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial
* portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
* OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include <acpi/button.h>
#include "drmP.h"
#include "drm_edid.h"
#include "drm_crtc_helper.h"
#include "nouveau_reg.h"
#include "nouveau_drv.h"
#include "nouveau_encoder.h"
#include "nouveau_crtc.h"
#include "nouveau_connector.h"
#include "nouveau_hw.h"
static inline struct drm_encoder_slave_funcs *
get_slave_funcs(struct nouveau_encoder *enc)
{
return to_encoder_slave(to_drm_encoder(enc))->slave_funcs;
}
static struct nouveau_encoder *
find_encoder_by_type(struct drm_connector *connector, int type)
{
struct drm_device *dev = connector->dev;
struct nouveau_encoder *nv_encoder;
struct drm_mode_object *obj;
int i, id;
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
id = connector->encoder_ids[i];
if (!id)
break;
obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
if (!obj)
continue;
nv_encoder = nouveau_encoder(obj_to_encoder(obj));
if (type == OUTPUT_ANY || nv_encoder->dcb->type == type)
return nv_encoder;
}
return NULL;
}
struct nouveau_connector *
nouveau_encoder_connector_get(struct nouveau_encoder *encoder)
{
struct drm_device *dev = to_drm_encoder(encoder)->dev;
struct drm_connector *drm_connector;
list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head) {
if (drm_connector->encoder == to_drm_encoder(encoder))
return nouveau_connector(drm_connector);
}
return NULL;
}
static void
nouveau_connector_destroy(struct drm_connector *drm_connector)
{
struct nouveau_connector *nv_connector =
nouveau_connector(drm_connector);
struct drm_device *dev;
if (!nv_connector)
return;
dev = nv_connector->base.dev;
NV_DEBUG_KMS(dev, "\n");
kfree(nv_connector->edid);
drm_sysfs_connector_remove(drm_connector);
drm_connector_cleanup(drm_connector);
kfree(drm_connector);
}
static void
nouveau_connector_ddc_prepare(struct drm_connector *connector, int *flags)
{
struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
if (dev_priv->card_type >= NV_50)
return;
*flags = 0;
if (NVLockVgaCrtcs(dev_priv->dev, false))
*flags |= 1;
if (nv_heads_tied(dev_priv->dev))
*flags |= 2;
if (*flags & 2)
NVSetOwner(dev_priv->dev, 0); /* necessary? */
}
static void
nouveau_connector_ddc_finish(struct drm_connector *connector, int flags)
{
struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
if (dev_priv->card_type >= NV_50)
return;
if (flags & 2)
NVSetOwner(dev_priv->dev, 4);
if (flags & 1)
NVLockVgaCrtcs(dev_priv->dev, true);
}
static struct nouveau_i2c_chan *
nouveau_connector_ddc_detect(struct drm_connector *connector,
struct nouveau_encoder **pnv_encoder)
{
struct drm_device *dev = connector->dev;
uint8_t out_buf[] = { 0x0, 0x0}, buf[2];
int ret, flags, i;
struct i2c_msg msgs[] = {
{
.addr = 0x50,
.flags = 0,
.len = 1,
.buf = out_buf,
},
{
.addr = 0x50,
.flags = I2C_M_RD,
.len = 1,
.buf = buf,
}
};
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
struct nouveau_i2c_chan *i2c = NULL;
struct nouveau_encoder *nv_encoder;
struct drm_mode_object *obj;
int id;
id = connector->encoder_ids[i];
if (!id)
break;
obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
if (!obj)
continue;
nv_encoder = nouveau_encoder(obj_to_encoder(obj));
if (nv_encoder->dcb->i2c_index < 0xf)
i2c = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
if (!i2c)
continue;
nouveau_connector_ddc_prepare(connector, &flags);
ret = i2c_transfer(&i2c->adapter, msgs, 2);
nouveau_connector_ddc_finish(connector, flags);
if (ret == 2) {
*pnv_encoder = nv_encoder;
return i2c;
}
}
return NULL;
}
static void
nouveau_connector_set_encoder(struct drm_connector *connector,
struct nouveau_encoder *nv_encoder)
{
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
struct drm_device *dev = connector->dev;
if (nv_connector->detected_encoder == nv_encoder)
return;
nv_connector->detected_encoder = nv_encoder;
if (nv_encoder->dcb->type == OUTPUT_LVDS ||
nv_encoder->dcb->type == OUTPUT_TMDS) {
connector->doublescan_allowed = false;
connector->interlace_allowed = false;
} else {
connector->doublescan_allowed = true;
if (dev_priv->card_type == NV_20 ||
(dev_priv->card_type == NV_10 &&
(dev->pci_device & 0x0ff0) != 0x0100 &&
(dev->pci_device & 0x0ff0) != 0x0150))
/* HW is broken */
connector->interlace_allowed = false;
else
connector->interlace_allowed = true;
}
if (nv_connector->dcb->type == DCB_CONNECTOR_DVI_I) {
drm_connector_property_set_value(connector,
dev->mode_config.dvi_i_subconnector_property,
nv_encoder->dcb->type == OUTPUT_TMDS ?
DRM_MODE_SUBCONNECTOR_DVID :
DRM_MODE_SUBCONNECTOR_DVIA);
}
}
static enum drm_connector_status
nouveau_connector_detect(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder = NULL;
struct nouveau_i2c_chan *i2c;
int type, flags;
if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS)
nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
if (nv_encoder && nv_connector->native_mode) {
unsigned status = connector_status_connected;
#ifdef CONFIG_ACPI
if (!nouveau_ignorelid && !acpi_lid_open())
status = connector_status_unknown;
#endif
nouveau_connector_set_encoder(connector, nv_encoder);
return status;
}
/* Cleanup the previous EDID block. */
if (nv_connector->edid) {
drm_mode_connector_update_edid_property(connector, NULL);
kfree(nv_connector->edid);
nv_connector->edid = NULL;
}
i2c = nouveau_connector_ddc_detect(connector, &nv_encoder);
if (i2c) {
nouveau_connector_ddc_prepare(connector, &flags);
nv_connector->edid = drm_get_edid(connector, &i2c->adapter);
nouveau_connector_ddc_finish(connector, flags);
drm_mode_connector_update_edid_property(connector,
nv_connector->edid);
if (!nv_connector->edid) {
NV_ERROR(dev, "DDC responded, but no EDID for %s\n",
drm_get_connector_name(connector));
goto detect_analog;
}
if (nv_encoder->dcb->type == OUTPUT_DP &&
!nouveau_dp_detect(to_drm_encoder(nv_encoder))) {
NV_ERROR(dev, "Detected %s, but failed init\n",
drm_get_connector_name(connector));
return connector_status_disconnected;
}
/* Override encoder type for DVI-I based on whether EDID
* says the display is digital or analog, both use the
* same i2c channel so the value returned from ddc_detect
* isn't necessarily correct.
*/
if (nv_connector->dcb->type == DCB_CONNECTOR_DVI_I) {
if (nv_connector->edid->input & DRM_EDID_INPUT_DIGITAL)
type = OUTPUT_TMDS;
else
type = OUTPUT_ANALOG;
nv_encoder = find_encoder_by_type(connector, type);
if (!nv_encoder) {
NV_ERROR(dev, "Detected %d encoder on %s, "
"but no object!\n", type,
drm_get_connector_name(connector));
return connector_status_disconnected;
}
}
nouveau_connector_set_encoder(connector, nv_encoder);
return connector_status_connected;
}
detect_analog:
nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
if (!nv_encoder)
nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
if (nv_encoder) {
struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
struct drm_encoder_helper_funcs *helper =
encoder->helper_private;
if (helper->detect(encoder, connector) ==
connector_status_connected) {
nouveau_connector_set_encoder(connector, nv_encoder);
return connector_status_connected;
}
}
return connector_status_disconnected;
}
static void
nouveau_connector_force(struct drm_connector *connector)
{
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder;
int type;
if (nv_connector->dcb->type == DCB_CONNECTOR_DVI_I) {
if (connector->force == DRM_FORCE_ON_DIGITAL)
type = OUTPUT_TMDS;
else
type = OUTPUT_ANALOG;
} else
type = OUTPUT_ANY;
nv_encoder = find_encoder_by_type(connector, type);
if (!nv_encoder) {
NV_ERROR(connector->dev, "can't find encoder to force %s on!\n",
drm_get_connector_name(connector));
connector->status = connector_status_disconnected;
return;
}
nouveau_connector_set_encoder(connector, nv_encoder);
}
static int
nouveau_connector_set_property(struct drm_connector *connector,
struct drm_property *property, uint64_t value)
{
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
struct drm_device *dev = connector->dev;
int ret;
/* Scaling mode */
if (property == dev->mode_config.scaling_mode_property) {
struct nouveau_crtc *nv_crtc = NULL;
bool modeset = false;
switch (value) {
case DRM_MODE_SCALE_NONE:
case DRM_MODE_SCALE_FULLSCREEN:
case DRM_MODE_SCALE_CENTER:
case DRM_MODE_SCALE_ASPECT:
break;
default:
return -EINVAL;
}
/* LVDS always needs gpu scaling */
if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS &&
value == DRM_MODE_SCALE_NONE)
return -EINVAL;
/* Changing between GPU and panel scaling requires a full
* modeset
*/
if ((nv_connector->scaling_mode == DRM_MODE_SCALE_NONE) ||
(value == DRM_MODE_SCALE_NONE))
modeset = true;
nv_connector->scaling_mode = value;
if (connector->encoder && connector->encoder->crtc)
nv_crtc = nouveau_crtc(connector->encoder->crtc);
if (!nv_crtc)
return 0;
if (modeset || !nv_crtc->set_scale) {
ret = drm_crtc_helper_set_mode(&nv_crtc->base,
&nv_crtc->base.mode,
nv_crtc->base.x,
nv_crtc->base.y, NULL);
if (!ret)
return -EINVAL;
} else {
ret = nv_crtc->set_scale(nv_crtc, value, true);
if (ret)
return ret;
}
return 0;
}
/* Dithering */
if (property == dev->mode_config.dithering_mode_property) {
struct nouveau_crtc *nv_crtc = NULL;
if (value == DRM_MODE_DITHERING_ON)
nv_connector->use_dithering = true;
else
nv_connector->use_dithering = false;
if (connector->encoder && connector->encoder->crtc)
nv_crtc = nouveau_crtc(connector->encoder->crtc);
if (!nv_crtc || !nv_crtc->set_dither)
return 0;
return nv_crtc->set_dither(nv_crtc, nv_connector->use_dithering,
true);
}
if (nv_encoder && nv_encoder->dcb->type == OUTPUT_TV)
return get_slave_funcs(nv_encoder)->
set_property(to_drm_encoder(nv_encoder), connector, property, value);
return -EINVAL;
}
static struct drm_display_mode *
nouveau_connector_native_mode(struct nouveau_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_display_mode *mode, *largest = NULL;
int high_w = 0, high_h = 0, high_v = 0;
/* Use preferred mode if there is one.. */
list_for_each_entry(mode, &connector->base.probed_modes, head) {
if (mode->type & DRM_MODE_TYPE_PREFERRED) {
NV_DEBUG_KMS(dev, "native mode from preferred\n");
return drm_mode_duplicate(dev, mode);
}
}
/* Otherwise, take the resolution with the largest width, then height,
* then vertical refresh
*/
list_for_each_entry(mode, &connector->base.probed_modes, head) {
if (mode->hdisplay < high_w)
continue;
if (mode->hdisplay == high_w && mode->vdisplay < high_h)
continue;
if (mode->hdisplay == high_w && mode->vdisplay == high_h &&
mode->vrefresh < high_v)
continue;
high_w = mode->hdisplay;
high_h = mode->vdisplay;
high_v = mode->vrefresh;
largest = mode;
}
NV_DEBUG_KMS(dev, "native mode from largest: %dx%d@%d\n",
high_w, high_h, high_v);
return largest ? drm_mode_duplicate(dev, largest) : NULL;
}
struct moderec {
int hdisplay;
int vdisplay;
};
static struct moderec scaler_modes[] = {
{ 1920, 1200 },
{ 1920, 1080 },
{ 1680, 1050 },
{ 1600, 1200 },
{ 1400, 1050 },
{ 1280, 1024 },
{ 1280, 960 },
{ 1152, 864 },
{ 1024, 768 },
{ 800, 600 },
{ 720, 400 },
{ 640, 480 },
{ 640, 400 },
{ 640, 350 },
{}
};
static int
nouveau_connector_scaler_modes_add(struct drm_connector *connector)
{
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct drm_display_mode *native = nv_connector->native_mode, *m;
struct drm_device *dev = connector->dev;
struct moderec *mode = &scaler_modes[0];
int modes = 0;
if (!native)
return 0;
while (mode->hdisplay) {
if (mode->hdisplay <= native->hdisplay &&
mode->vdisplay <= native->vdisplay) {
m = drm_cvt_mode(dev, mode->hdisplay, mode->vdisplay,
drm_mode_vrefresh(native), false,
false, false);
if (!m)
continue;
m->type |= DRM_MODE_TYPE_DRIVER;
drm_mode_probed_add(connector, m);
modes++;
}
mode++;
}
return modes;
}
static int
nouveau_connector_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
int ret = 0;
/* If we're not LVDS, destroy the previous native mode, the attached
* monitor could have changed.
*/
if (nv_connector->dcb->type != DCB_CONNECTOR_LVDS &&
nv_connector->native_mode) {
drm_mode_destroy(dev, nv_connector->native_mode);
nv_connector->native_mode = NULL;
}
if (nv_connector->edid)
ret = drm_add_edid_modes(connector, nv_connector->edid);
/* Find the native mode if this is a digital panel, if we didn't
* find any modes through DDC previously add the native mode to
* the list of modes.
*/
if (!nv_connector->native_mode)
nv_connector->native_mode =
nouveau_connector_native_mode(nv_connector);
if (ret == 0 && nv_connector->native_mode) {
struct drm_display_mode *mode;
mode = drm_mode_duplicate(dev, nv_connector->native_mode);
drm_mode_probed_add(connector, mode);
ret = 1;
}
if (nv_encoder->dcb->type == OUTPUT_TV)
ret = get_slave_funcs(nv_encoder)->
get_modes(to_drm_encoder(nv_encoder), connector);
if (nv_encoder->dcb->type == OUTPUT_LVDS)
ret += nouveau_connector_scaler_modes_add(connector);
return ret;
}
static int
nouveau_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
unsigned min_clock = 25000, max_clock = min_clock;
unsigned clock = mode->clock;
switch (nv_encoder->dcb->type) {
case OUTPUT_LVDS:
BUG_ON(!nv_connector->native_mode);
if (mode->hdisplay > nv_connector->native_mode->hdisplay ||
mode->vdisplay > nv_connector->native_mode->vdisplay)
return MODE_PANEL;
min_clock = 0;
max_clock = 400000;
break;
case OUTPUT_TMDS:
if ((dev_priv->card_type >= NV_50 && !nouveau_duallink) ||
(dev_priv->card_type < NV_50 &&
!nv_encoder->dcb->duallink_possible))
max_clock = 165000;
else
max_clock = 330000;
break;
case OUTPUT_ANALOG:
max_clock = nv_encoder->dcb->crtconf.maxfreq;
if (!max_clock)
max_clock = 350000;
break;
case OUTPUT_TV:
return get_slave_funcs(nv_encoder)->
mode_valid(to_drm_encoder(nv_encoder), mode);
case OUTPUT_DP:
if (nv_encoder->dp.link_bw == DP_LINK_BW_2_7)
max_clock = nv_encoder->dp.link_nr * 270000;
else
max_clock = nv_encoder->dp.link_nr * 162000;
clock *= 3;
break;
default:
BUG_ON(1);
return MODE_BAD;
}
if (clock < min_clock)
return MODE_CLOCK_LOW;
if (clock > max_clock)
return MODE_CLOCK_HIGH;
return MODE_OK;
}
static struct drm_encoder *
nouveau_connector_best_encoder(struct drm_connector *connector)
{
struct nouveau_connector *nv_connector = nouveau_connector(connector);
if (nv_connector->detected_encoder)
return to_drm_encoder(nv_connector->detected_encoder);
return NULL;
}
static const struct drm_connector_helper_funcs
nouveau_connector_helper_funcs = {
.get_modes = nouveau_connector_get_modes,
.mode_valid = nouveau_connector_mode_valid,
.best_encoder = nouveau_connector_best_encoder,
};
static const struct drm_connector_funcs
nouveau_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.save = NULL,
.restore = NULL,
.detect = nouveau_connector_detect,
.destroy = nouveau_connector_destroy,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = nouveau_connector_set_property,
.force = nouveau_connector_force
};
static int
nouveau_connector_create_lvds(struct drm_device *dev,
struct drm_connector *connector)
{
struct nouveau_connector *nv_connector = nouveau_connector(connector);
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_i2c_chan *i2c = NULL;
struct nouveau_encoder *nv_encoder;
struct drm_display_mode native, *mode, *temp;
bool dummy, if_is_24bit = false;
int ret, flags;
nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
if (!nv_encoder)
return -ENODEV;
ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &if_is_24bit);
if (ret) {
NV_ERROR(dev, "Error parsing LVDS table, disabling LVDS\n");
return ret;
}
nv_connector->use_dithering = !if_is_24bit;
/* Firstly try getting EDID over DDC, if allowed and I2C channel
* is available.
*/
if (!dev_priv->vbios.fp_no_ddc && nv_encoder->dcb->i2c_index < 0xf)
i2c = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
if (i2c) {
nouveau_connector_ddc_prepare(connector, &flags);
nv_connector->edid = drm_get_edid(connector, &i2c->adapter);
nouveau_connector_ddc_finish(connector, flags);
}
/* If no EDID found above, and the VBIOS indicates a hardcoded
* modeline is avalilable for the panel, set it as the panel's
* native mode and exit.
*/
if (!nv_connector->edid && nouveau_bios_fp_mode(dev, &native) &&
(nv_encoder->dcb->lvdsconf.use_straps_for_mode ||
dev_priv->vbios.fp_no_ddc)) {
nv_connector->native_mode = drm_mode_duplicate(dev, &native);
goto out;
}
/* Still nothing, some VBIOS images have a hardcoded EDID block
* stored for the panel stored in them.
*/
if (!nv_connector->edid && !nv_connector->native_mode &&
!dev_priv->vbios.fp_no_ddc) {
struct edid *edid =
(struct edid *)nouveau_bios_embedded_edid(dev);
if (edid) {
nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
*(nv_connector->edid) = *edid;
}
}
if (!nv_connector->edid)
goto out;
/* We didn't find/use a panel mode from the VBIOS, so parse the EDID
* block and look for the preferred mode there.
*/
ret = drm_add_edid_modes(connector, nv_connector->edid);
if (ret == 0)
goto out;
nv_connector->detected_encoder = nv_encoder;
nv_connector->native_mode = nouveau_connector_native_mode(nv_connector);
list_for_each_entry_safe(mode, temp, &connector->probed_modes, head)
drm_mode_remove(connector, mode);
out:
if (!nv_connector->native_mode) {
NV_ERROR(dev, "LVDS present in DCB table, but couldn't "
"determine its native mode. Disabling.\n");
return -ENODEV;
}
drm_mode_connector_update_edid_property(connector, nv_connector->edid);
return 0;
}
int
nouveau_connector_create(struct drm_device *dev,
struct dcb_connector_table_entry *dcb)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_connector *nv_connector = NULL;
struct drm_connector *connector;
struct drm_encoder *encoder;
int ret, type;
NV_DEBUG_KMS(dev, "\n");
switch (dcb->type) {
case DCB_CONNECTOR_NONE:
return 0;
case DCB_CONNECTOR_VGA:
NV_INFO(dev, "Detected a VGA connector\n");
type = DRM_MODE_CONNECTOR_VGA;
break;
case DCB_CONNECTOR_TV_0:
case DCB_CONNECTOR_TV_1:
case DCB_CONNECTOR_TV_3:
NV_INFO(dev, "Detected a TV connector\n");
type = DRM_MODE_CONNECTOR_TV;
break;
case DCB_CONNECTOR_DVI_I:
NV_INFO(dev, "Detected a DVI-I connector\n");
type = DRM_MODE_CONNECTOR_DVII;
break;
case DCB_CONNECTOR_DVI_D:
NV_INFO(dev, "Detected a DVI-D connector\n");
type = DRM_MODE_CONNECTOR_DVID;
break;
case DCB_CONNECTOR_HDMI_0:
case DCB_CONNECTOR_HDMI_1:
NV_INFO(dev, "Detected a HDMI connector\n");
type = DRM_MODE_CONNECTOR_HDMIA;
break;
case DCB_CONNECTOR_LVDS:
NV_INFO(dev, "Detected a LVDS connector\n");
type = DRM_MODE_CONNECTOR_LVDS;
break;
case DCB_CONNECTOR_DP:
NV_INFO(dev, "Detected a DisplayPort connector\n");
type = DRM_MODE_CONNECTOR_DisplayPort;
break;
case DCB_CONNECTOR_eDP:
NV_INFO(dev, "Detected an eDP connector\n");
type = DRM_MODE_CONNECTOR_eDP;
break;
default:
NV_ERROR(dev, "unknown connector type: 0x%02x!!\n", dcb->type);
return -EINVAL;
}
nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL);
if (!nv_connector)
return -ENOMEM;
nv_connector->dcb = dcb;
connector = &nv_connector->base;
/* defaults, will get overridden in detect() */
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
drm_connector_init(dev, connector, &nouveau_connector_funcs, type);
drm_connector_helper_add(connector, &nouveau_connector_helper_funcs);
/* attach encoders */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
if (nv_encoder->dcb->connector != dcb->index)
continue;
if (get_slave_funcs(nv_encoder))
get_slave_funcs(nv_encoder)->create_resources(encoder, connector);
drm_mode_connector_attach_encoder(connector, encoder);
}
if (!connector->encoder_ids[0]) {
NV_WARN(dev, " no encoders, ignoring\n");
drm_connector_cleanup(connector);
kfree(connector);
return 0;
}
/* Init DVI-I specific properties */
if (dcb->type == DCB_CONNECTOR_DVI_I) {
drm_mode_create_dvi_i_properties(dev);
drm_connector_attach_property(connector, dev->mode_config.dvi_i_subconnector_property, 0);
drm_connector_attach_property(connector, dev->mode_config.dvi_i_select_subconnector_property, 0);
}
if (dcb->type != DCB_CONNECTOR_LVDS)
nv_connector->use_dithering = false;
switch (dcb->type) {
case DCB_CONNECTOR_VGA:
if (dev_priv->card_type >= NV_50) {
drm_connector_attach_property(connector,
dev->mode_config.scaling_mode_property,
nv_connector->scaling_mode);
}
/* fall-through */
case DCB_CONNECTOR_TV_0:
case DCB_CONNECTOR_TV_1:
case DCB_CONNECTOR_TV_3:
nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
break;
default:
nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;
drm_connector_attach_property(connector,
dev->mode_config.scaling_mode_property,
nv_connector->scaling_mode);
drm_connector_attach_property(connector,
dev->mode_config.dithering_mode_property,
nv_connector->use_dithering ?
DRM_MODE_DITHERING_ON : DRM_MODE_DITHERING_OFF);
break;
}
drm_sysfs_connector_add(connector);
if (dcb->type == DCB_CONNECTOR_LVDS) {
ret = nouveau_connector_create_lvds(dev, connector);
if (ret) {
connector->funcs->destroy(connector);
return ret;
}
}
return 0;
}