Lukas Wunner 0fa635aec9 PCI/LINK: Deduplicate bandwidth reports for multi-function devices ... If a multi-function device's bandwidth is already limited when it is enumerated, a message is logged only for function 0. By contrast, when downtraining occurs after enumeration, a message is logged for all functions. That's because the former uses pcie_report_downtraining(), whereas the latter uses __pcie_print_link_status() (which doesn't filter functions != 0). I am seeing this happen on a MacBookPro9,1 with a GPU (function 0) and an integrated HDA controller (function 1). Avoid this incongruence by calling pcie_report_downtraining() in both cases. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>		2019-03-25 17:59:07 -05:00
..
controller	pci-v5.1-changes	2019-03-09 14:57:08 -08:00
endpoint	PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features	2019-02-15 10:01:16 +00:00
hotplug	Merge branch 'pci/pm'	2019-03-06 15:30:15 -06:00
pcie	PCI/LINK: Deduplicate bandwidth reports for multi-function devices	2019-03-25 17:59:07 -05:00
switch	cross-tree: phase out dma_zalloc_coherent()	2019-01-08 07:58:37 -05:00
access.c	PCI: Uninline PCI bus accessors for better ftracing	2018-10-04 16:37:37 -05:00
ats.c	PCI/ATS: Add pci_ats_page_aligned() interface	2019-02-26 11:08:07 +01:00
bus.c	PCI: Fix is_added/is_busmaster race condition	2018-07-31 11:27:54 -05:00
ecam.c
host-bridge.c	PCI: Tidy comments	2018-03-19 14:20:43 -05:00
iov.c	PCI/IOV: Add flag so platforms can skip VF scanning	2019-01-01 19:04:37 -06:00
irq.c	PCI: Use IRQF_ONESHOT if pci_request_irq() called with no handler	2018-07-31 10:43:43 -05:00
Kconfig	PCI: Fix PCI kconfig menu organization	2019-01-14 17:01:20 -06:00
Makefile	PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set	2018-12-20 10:19:49 +01:00
mmap.c	PCI: Tidy comments	2018-03-19 14:20:43 -05:00
msi.c	PCI/MSI: Remove obsolete sanity checks for multiple interrupt sets	2019-02-18 11:21:29 +01:00
of.c	PCI: Use of_node_name_eq() for node name comparisons	2019-01-22 14:13:02 -06:00
p2pdma.c	pci-v4.21-changes	2019-01-05 17:57:34 -08:00
pci-acpi.c	PCI / ACPI: Identify untrusted PCI devices	2018-12-05 12:01:55 +03:00
pci-bridge-emul.c	PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flags	2019-02-22 10:51:14 +00:00
pci-bridge-emul.h	PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flags	2019-02-22 10:51:14 +00:00
pci-driver.c	PCI: Clean up usage of __u32 type	2019-02-08 13:40:36 -06:00
pci-label.c	PCI: Tidy comments	2018-03-19 14:20:43 -05:00
pci-mid.c	x86/cpu: Sanitize FAM6_ATOM naming	2018-10-02 10:14:32 +02:00
pci-pf-stub.c	PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs	2018-04-24 16:47:16 -05:00
pci-stub.c	PCI: Tidy comments	2018-03-19 14:20:43 -05:00
pci-sysfs.c	PCI: pci-sysfs.c: convert to use BUS_ATTR_WO	2019-01-22 14:25:26 +01:00
pci.c	pci-v5.1-changes	2019-03-09 14:57:08 -08:00
pci.h	PCI/LINK: Deduplicate bandwidth reports for multi-function devices	2019-03-25 17:59:07 -05:00
probe.c	PCI/LINK: Deduplicate bandwidth reports for multi-function devices	2019-03-25 17:59:07 -05:00
proc.c	Remove 'type' argument from access_ok() function	2019-01-03 18:57:57 -08:00
quirks.c	pci-v5.1-changes	2019-03-09 14:57:08 -08:00
remove.c	PCI/ASPM: Fix link_state teardown on device removal	2018-09-17 16:32:23 -05:00
rom.c	PCI: Make pci_get_rom_size() static	2018-06-29 21:17:26 -05:00
search.c	PCI: Tidy comments	2018-03-19 14:20:43 -05:00
setup-bus.c	PCI: Rely on config space header type, not class code	2019-01-30 10:57:08 -06:00
setup-irq.c	PCI: Tidy comments	2018-03-19 14:20:43 -05:00
setup-res.c	PCI: Remove messages about reassigning resources	2018-04-11 08:46:50 -05:00
slot.c	PCI/ERR: Use slot reset if available	2018-09-21 12:18:10 -05:00
syscall.c	PCI: Tidy comments	2018-03-19 14:20:43 -05:00
vc.c
vpd.c	PCI/VPD: Check for VPD access completion before checking for timeout	2018-08-14 16:04:46 -05:00
xen-pcifront.c	PCI: Tidy comments	2018-03-19 14:20:43 -05:00