mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
974cc7b934
This patch - finally, after over 6 months! :-( - addresses Samuel's request to split the vexpress-sysreg driver into smaller portions and define the device in a form of MFD cells: * LEDs code has been completely removed and replaced with "gpio-leds" nodes in the tree (referencing dedicated GPIO subnodes in sysreg - bindings documentation updated); this also better fits the reality as some variants of the motherboard don't have all the LEDs populated * syscfg bridge code has been extracted into a separate driver (placed in drivers/misc for no better place) * all the ID & MISC registers are defined as sysconf making them available for other drivers should they need to use them (and also to the user via /sys/kernel/debug/regmap which can be helpful in platform debugging) Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Lee Jones <lee.jones@linaro.org>
409 lines
9.4 KiB
Plaintext
409 lines
9.4 KiB
Plaintext
/*
|
|
* ARM Ltd. Versatile Express
|
|
*
|
|
* Motherboard Express uATX
|
|
* V2M-P1
|
|
*
|
|
* HBI-0190D
|
|
*
|
|
* RS1 memory map ("ARM Cortex-A Series memory map" in the board's
|
|
* Technical Reference Manual)
|
|
*
|
|
* WARNING! The hardware described in this file is independent from the
|
|
* original variant (vexpress-v2m.dtsi), but there is a strong
|
|
* correspondence between the two configurations.
|
|
*
|
|
* TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
|
|
* CHANGES TO vexpress-v2m.dtsi!
|
|
*/
|
|
|
|
motherboard {
|
|
model = "V2M-P1";
|
|
arm,hbi = <0x190>;
|
|
arm,vexpress,site = <0>;
|
|
arm,v2m-memory-map = "rs1";
|
|
compatible = "arm,vexpress,v2m-p1", "simple-bus";
|
|
#address-cells = <2>; /* SMB chipselect number and offset */
|
|
#size-cells = <1>;
|
|
#interrupt-cells = <1>;
|
|
ranges;
|
|
|
|
flash@0,00000000 {
|
|
compatible = "arm,vexpress-flash", "cfi-flash";
|
|
reg = <0 0x00000000 0x04000000>,
|
|
<4 0x00000000 0x04000000>;
|
|
bank-width = <4>;
|
|
};
|
|
|
|
psram@1,00000000 {
|
|
compatible = "arm,vexpress-psram", "mtd-ram";
|
|
reg = <1 0x00000000 0x02000000>;
|
|
bank-width = <4>;
|
|
};
|
|
|
|
vram@2,00000000 {
|
|
compatible = "arm,vexpress-vram";
|
|
reg = <2 0x00000000 0x00800000>;
|
|
};
|
|
|
|
ethernet@2,02000000 {
|
|
compatible = "smsc,lan9118", "smsc,lan9115";
|
|
reg = <2 0x02000000 0x10000>;
|
|
interrupts = <15>;
|
|
phy-mode = "mii";
|
|
reg-io-width = <4>;
|
|
smsc,irq-active-high;
|
|
smsc,irq-push-pull;
|
|
vdd33a-supply = <&v2m_fixed_3v3>;
|
|
vddvario-supply = <&v2m_fixed_3v3>;
|
|
};
|
|
|
|
usb@2,03000000 {
|
|
compatible = "nxp,usb-isp1761";
|
|
reg = <2 0x03000000 0x20000>;
|
|
interrupts = <16>;
|
|
port1-otg;
|
|
};
|
|
|
|
iofpga@3,00000000 {
|
|
compatible = "arm,amba-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 3 0 0x200000>;
|
|
|
|
v2m_sysreg: sysreg@010000 {
|
|
compatible = "arm,vexpress-sysreg";
|
|
reg = <0x010000 0x1000>;
|
|
|
|
v2m_led_gpios: sys_led@08 {
|
|
compatible = "arm,vexpress-sysreg,sys_led";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
v2m_mmc_gpios: sys_mci@48 {
|
|
compatible = "arm,vexpress-sysreg,sys_mci";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
v2m_flash_gpios: sys_flash@4c {
|
|
compatible = "arm,vexpress-sysreg,sys_flash";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
v2m_sysctl: sysctl@020000 {
|
|
compatible = "arm,sp810", "arm,primecell";
|
|
reg = <0x020000 0x1000>;
|
|
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
|
|
clock-names = "refclk", "timclk", "apb_pclk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
|
|
};
|
|
|
|
/* PCI-E I2C bus */
|
|
v2m_i2c_pcie: i2c@030000 {
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x030000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pcie-switch@60 {
|
|
compatible = "idt,89hpes32h8";
|
|
reg = <0x60>;
|
|
};
|
|
};
|
|
|
|
aaci@040000 {
|
|
compatible = "arm,pl041", "arm,primecell";
|
|
reg = <0x040000 0x1000>;
|
|
interrupts = <11>;
|
|
clocks = <&smbclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
mmci@050000 {
|
|
compatible = "arm,pl180", "arm,primecell";
|
|
reg = <0x050000 0x1000>;
|
|
interrupts = <9 10>;
|
|
cd-gpios = <&v2m_mmc_gpios 0 0>;
|
|
wp-gpios = <&v2m_mmc_gpios 1 0>;
|
|
max-frequency = <12000000>;
|
|
vmmc-supply = <&v2m_fixed_3v3>;
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
};
|
|
|
|
kmi@060000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x060000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
kmi@070000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x070000 0x1000>;
|
|
interrupts = <13>;
|
|
clocks = <&v2m_clk24mhz>, <&smbclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial0: uart@090000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x090000 0x1000>;
|
|
interrupts = <5>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial1: uart@0a0000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x0a0000 0x1000>;
|
|
interrupts = <6>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial2: uart@0b0000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x0b0000 0x1000>;
|
|
interrupts = <7>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_serial3: uart@0c0000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x0c0000 0x1000>;
|
|
interrupts = <8>;
|
|
clocks = <&v2m_oscclk2>, <&smbclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
wdt@0f0000 {
|
|
compatible = "arm,sp805", "arm,primecell";
|
|
reg = <0x0f0000 0x1000>;
|
|
interrupts = <0>;
|
|
clocks = <&v2m_refclk32khz>, <&smbclk>;
|
|
clock-names = "wdogclk", "apb_pclk";
|
|
};
|
|
|
|
v2m_timer01: timer@110000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x110000 0x1000>;
|
|
interrupts = <2>;
|
|
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
|
|
clock-names = "timclken1", "timclken2", "apb_pclk";
|
|
};
|
|
|
|
v2m_timer23: timer@120000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x120000 0x1000>;
|
|
interrupts = <3>;
|
|
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
|
|
clock-names = "timclken1", "timclken2", "apb_pclk";
|
|
};
|
|
|
|
/* DVI I2C bus */
|
|
v2m_i2c_dvi: i2c@160000 {
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x160000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
dvi-transmitter@39 {
|
|
compatible = "sil,sii9022-tpi", "sil,sii9022";
|
|
reg = <0x39>;
|
|
};
|
|
|
|
dvi-transmitter@60 {
|
|
compatible = "sil,sii9022-cpi", "sil,sii9022";
|
|
reg = <0x60>;
|
|
};
|
|
};
|
|
|
|
rtc@170000 {
|
|
compatible = "arm,pl031", "arm,primecell";
|
|
reg = <0x170000 0x1000>;
|
|
interrupts = <4>;
|
|
clocks = <&smbclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
compact-flash@1a0000 {
|
|
compatible = "arm,vexpress-cf", "ata-generic";
|
|
reg = <0x1a0000 0x100
|
|
0x1a0100 0xf00>;
|
|
reg-shift = <2>;
|
|
};
|
|
|
|
clcd@1f0000 {
|
|
compatible = "arm,pl111", "arm,primecell";
|
|
reg = <0x1f0000 0x1000>;
|
|
interrupts = <14>;
|
|
clocks = <&v2m_oscclk1>, <&smbclk>;
|
|
clock-names = "clcdclk", "apb_pclk";
|
|
};
|
|
};
|
|
|
|
v2m_fixed_3v3: fixedregulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
v2m_clk24mhz: clk24mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "v2m:clk24mhz";
|
|
};
|
|
|
|
v2m_refclk1mhz: refclk1mhz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <1000000>;
|
|
clock-output-names = "v2m:refclk1mhz";
|
|
};
|
|
|
|
v2m_refclk32khz: refclk32khz {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "v2m:refclk32khz";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
user@1 {
|
|
label = "v2m:green:user1";
|
|
gpios = <&v2m_led_gpios 0 0>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
user@2 {
|
|
label = "v2m:green:user2";
|
|
gpios = <&v2m_led_gpios 1 0>;
|
|
linux,default-trigger = "mmc0";
|
|
};
|
|
|
|
user@3 {
|
|
label = "v2m:green:user3";
|
|
gpios = <&v2m_led_gpios 2 0>;
|
|
linux,default-trigger = "cpu0";
|
|
};
|
|
|
|
user@4 {
|
|
label = "v2m:green:user4";
|
|
gpios = <&v2m_led_gpios 3 0>;
|
|
linux,default-trigger = "cpu1";
|
|
};
|
|
|
|
user@5 {
|
|
label = "v2m:green:user5";
|
|
gpios = <&v2m_led_gpios 4 0>;
|
|
linux,default-trigger = "cpu2";
|
|
};
|
|
|
|
user@6 {
|
|
label = "v2m:green:user6";
|
|
gpios = <&v2m_led_gpios 5 0>;
|
|
linux,default-trigger = "cpu3";
|
|
};
|
|
|
|
user@7 {
|
|
label = "v2m:green:user7";
|
|
gpios = <&v2m_led_gpios 6 0>;
|
|
linux,default-trigger = "cpu4";
|
|
};
|
|
|
|
user@8 {
|
|
label = "v2m:green:user8";
|
|
gpios = <&v2m_led_gpios 7 0>;
|
|
linux,default-trigger = "cpu5";
|
|
};
|
|
};
|
|
|
|
mcc {
|
|
compatible = "arm,vexpress,config-bus";
|
|
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
|
|
|
osc@0 {
|
|
/* MCC static memory clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 0>;
|
|
freq-range = <25000000 60000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "v2m:oscclk0";
|
|
};
|
|
|
|
v2m_oscclk1: osc@1 {
|
|
/* CLCD clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 1>;
|
|
freq-range = <23750000 63500000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "v2m:oscclk1";
|
|
};
|
|
|
|
v2m_oscclk2: osc@2 {
|
|
/* IO FPGA peripheral clock */
|
|
compatible = "arm,vexpress-osc";
|
|
arm,vexpress-sysreg,func = <1 2>;
|
|
freq-range = <24000000 24000000>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "v2m:oscclk2";
|
|
};
|
|
|
|
volt@0 {
|
|
/* Logic level voltage */
|
|
compatible = "arm,vexpress-volt";
|
|
arm,vexpress-sysreg,func = <2 0>;
|
|
regulator-name = "VIO";
|
|
regulator-always-on;
|
|
label = "VIO";
|
|
};
|
|
|
|
temp@0 {
|
|
/* MCC internal operating temperature */
|
|
compatible = "arm,vexpress-temp";
|
|
arm,vexpress-sysreg,func = <4 0>;
|
|
label = "MCC";
|
|
};
|
|
|
|
reset@0 {
|
|
compatible = "arm,vexpress-reset";
|
|
arm,vexpress-sysreg,func = <5 0>;
|
|
};
|
|
|
|
muxfpga@0 {
|
|
compatible = "arm,vexpress-muxfpga";
|
|
arm,vexpress-sysreg,func = <7 0>;
|
|
};
|
|
|
|
shutdown@0 {
|
|
compatible = "arm,vexpress-shutdown";
|
|
arm,vexpress-sysreg,func = <8 0>;
|
|
};
|
|
|
|
reboot@0 {
|
|
compatible = "arm,vexpress-reboot";
|
|
arm,vexpress-sysreg,func = <9 0>;
|
|
};
|
|
|
|
dvimode@0 {
|
|
compatible = "arm,vexpress-dvimode";
|
|
arm,vexpress-sysreg,func = <11 0>;
|
|
};
|
|
};
|
|
};
|