Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-23 12:42:02 +00:00
Code Issues Packages Projects Releases Wiki Activity
e444f6d68c
linux/drivers/regulator/rk808-regulator.c
Heiko Stuebner e444f6d68c regulator: rk808: Add RK809 and RK817 support. 
Add support for the rk809 and rk817 regulator driver.
    Their specifications are as follows：
    1. The RK809 and RK809 consist of 5 DCDCs, 9 LDOs
       and have the same registers for these components except dcdc5.
    2. The dcdc5 is a boost dcdc for RK817 and is a buck for RK809.
    3. The RK817 has one switch but The Rk809 has two.

    The output voltages are configurable and are meant to supply power
    to the main processor and other components.

Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Acked-by: Mark Brown <broonie@kernel.org>
[rebased on top of 5.2-rc1]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27 14:57:31 +01:00

1405 lines
44 KiB
C
Raw Blame History

/*
* Regulator driver for Rockchip RK805/RK808/RK818
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Author: Chris Zhong <zyw@rock-chips.com>
* Author: Zhang Qing <zhangqing@rock-chips.com>
*
* Copyright (C) 2016 PHYTEC Messtechnik GmbH
*
* Author: Wadim Egorov <w.egorov@phytec.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/mfd/rk808.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio/consumer.h>
/* Field Definitions */
#define RK808_BUCK_VSEL_MASK 0x3f
#define RK808_BUCK4_VSEL_MASK 0xf
#define RK808_LDO_VSEL_MASK 0x1f
#define RK809_BUCK5_VSEL_MASK 0x7
#define RK817_LDO_VSEL_MASK 0x7f
#define RK817_BOOST_VSEL_MASK 0x7
#define RK817_BUCK_VSEL_MASK 0x7f
#define RK818_BUCK_VSEL_MASK 0x3f
#define RK818_BUCK4_VSEL_MASK 0x1f
#define RK818_LDO_VSEL_MASK 0x1f
#define RK818_LDO3_ON_VSEL_MASK 0xf
#define RK818_BOOST_ON_VSEL_MASK 0xe0
/* Ramp rate definitions for buck1 / buck2 only */
#define RK808_RAMP_RATE_OFFSET 3
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
#define RK808_DVS2_POL BIT(2)
#define RK808_DVS1_POL BIT(1)
/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
#define RK808_SLP_REG_OFFSET 1
/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
#define RK808_DVS_REG_OFFSET 2
/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
#define RK808_SLP_SET_OFF_REG_OFFSET 2
/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8
#define ENABLE_MASK(id) (BIT(id) | BIT(4 + (id)))
#define DISABLE_VAL(id) (BIT(4 + (id)))
#define RK817_BOOST_DESC(_id, _match, _supply, _min, _max, _step, _vreg,\
_vmask, _ereg, _emask, _enval, _disval, _etime, m_drop) \
{ \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = (_id), \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_val = (_enval), \
.disable_val = (_disval), \
.enable_time = (_etime), \
.min_dropout_uV = (m_drop) * 1000, \
.ops = &rk817_boost_ops, \
}
#define RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _enval, _disval, _etime, _ops) \
{ \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = (_id), \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_val = (_enval), \
.disable_val = (_disval), \
.enable_time = (_etime), \
.ops = _ops, \
}
#define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _etime) \
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, 0, 0, _etime, &rk805_reg_ops)
#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _etime) \
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, 0, 0, _etime, &rk808_reg_ops)
#define RK817_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _disval, _etime) \
RK8XX_DESC_COM(_id, _match, _supply, _min, _max, _step, _vreg, \
_vmask, _ereg, _emask, _emask, _disval, _etime, &rk817_reg_ops)
#define RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
_enval, _disval, _ops) \
{ \
.name = (_match), \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
.id = (_id), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_val = (_enval), \
.disable_val = (_disval), \
.owner = THIS_MODULE, \
.ops = _ops \
}
#define RK817_DESC_SWITCH(_id, _match, _supply, _ereg, _emask, \
_disval) \
RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
_emask, _disval, &rk817_switch_ops)
#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
RKXX_DESC_SWITCH_COM(_id, _match, _supply, _ereg, _emask, \
0, 0, &rk808_switch_ops)
struct rk808_regulator_data {
struct gpio_desc *dvs_gpio[2];
};
static const int rk808_buck_config_regs[] = {
RK808_BUCK1_CONFIG_REG,
RK808_BUCK2_CONFIG_REG,
RK808_BUCK3_CONFIG_REG,
RK808_BUCK4_CONFIG_REG,
};
static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};
#define RK809_BUCK5_SEL_CNT (8)
static const struct regulator_linear_range rk809_buck5_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(1500000, 0, 0, 0),
REGULATOR_LINEAR_RANGE(1800000, 1, 3, 200000),
REGULATOR_LINEAR_RANGE(2800000, 4, 5, 200000),
REGULATOR_LINEAR_RANGE(3300000, 6, 7, 300000),
};
#define RK817_BUCK1_MIN0 500000
#define RK817_BUCK1_MAX0 1500000
#define RK817_BUCK1_MIN1 1600000
#define RK817_BUCK1_MAX1 2400000
#define RK817_BUCK3_MAX1 3400000
#define RK817_BUCK1_STP0 12500
#define RK817_BUCK1_STP1 100000
#define RK817_BUCK1_SEL0 ((RK817_BUCK1_MAX0 - RK817_BUCK1_MIN0) /\
RK817_BUCK1_STP0)
#define RK817_BUCK1_SEL1 ((RK817_BUCK1_MAX1 - RK817_BUCK1_MIN1) /\
RK817_BUCK1_STP1)
#define RK817_BUCK3_SEL1 ((RK817_BUCK3_MAX1 - RK817_BUCK1_MIN1) /\
RK817_BUCK1_STP1)
#define RK817_BUCK1_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK1_SEL1 + 1)
#define RK817_BUCK3_SEL_CNT (RK817_BUCK1_SEL0 + RK817_BUCK3_SEL1 + 1)
static const struct regulator_linear_range rk817_buck1_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
RK817_BUCK1_SEL_CNT, RK817_BUCK1_STP1),
};
static const struct regulator_linear_range rk817_buck3_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN0, 0,
RK817_BUCK1_SEL0, RK817_BUCK1_STP0),
REGULATOR_LINEAR_RANGE(RK817_BUCK1_MIN1, RK817_BUCK1_SEL0 + 1,
RK817_BUCK3_SEL_CNT, RK817_BUCK1_STP1),
};
static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int val;
int ret;
if (!gpio || gpiod_get_value(gpio) == 0)
return regulator_get_voltage_sel_regmap(rdev);
ret = regmap_read(rdev->regmap,
rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
&val);
if (ret != 0)
return ret;
val &= rdev->desc->vsel_mask;
val >>= ffs(rdev->desc->vsel_mask) - 1;
return val;
}
static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
int ret, delta_sel;
unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
if (ret != 0)
return ret;
tmp = val & ~mask;
old_sel = val & mask;
old_sel >>= ffs(mask) - 1;
delta_sel = sel - old_sel;
/*
* If directly modify the register to change the voltage, we will face
* the risk of overshoot. Put it into a multi-step, can effectively
* avoid this problem, a step is 100mv here.
*/
while (delta_sel > MAX_STEPS_ONE_TIME) {
old_sel += MAX_STEPS_ONE_TIME;
val = old_sel << (ffs(mask) - 1);
val |= tmp;
/*
* i2c is 400kHz (2.5us per bit) and we must transmit _at least_
* 3 bytes (24 bits) plus start and stop so 26 bits. So we've
* got more than 65 us between each voltage change and thus
* won't ramp faster than ~1500 uV / us.
*/
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
delta_sel = sel - old_sel;
}
sel <<= ffs(mask) - 1;
val = tmp | sel;
ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
/*
* When we change the voltage register directly, the ramp rate is about
* 100000uv/us, wait 1us to make sure the target voltage to be stable,
* so we needn't wait extra time after that.
*/
udelay(1);
return ret;
}
static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
unsigned int reg = rdev->desc->vsel_reg;
unsigned old_sel;
int ret, gpio_level;
if (!gpio)
return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
gpio_level = gpiod_get_value(gpio);
if (gpio_level == 0) {
reg += RK808_DVS_REG_OFFSET;
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
} else {
ret = regmap_read(rdev->regmap,
reg + RK808_DVS_REG_OFFSET,
&old_sel);
}
if (ret != 0)
return ret;
sel <<= ffs(rdev->desc->vsel_mask) - 1;
sel |= old_sel & ~rdev->desc->vsel_mask;
ret = regmap_write(rdev->regmap, reg, sel);
if (ret)
return ret;
gpiod_set_value(gpio, !gpio_level);
return ret;
}
static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
struct gpio_desc *gpio = pdata->dvs_gpio[id];
/* if there is no dvs1/2 pin, we don't need wait extra time here. */
if (!gpio)
return 0;
return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
}
static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
unsigned int reg = rk808_buck_config_regs[rdev_get_id(rdev)];
switch (ramp_delay) {
case 1 ... 2000:
ramp_value = RK808_RAMP_RATE_2MV_PER_US;
break;
case 2001 ... 4000:
ramp_value = RK808_RAMP_RATE_4MV_PER_US;
break;
case 4001 ... 6000:
ramp_value = RK808_RAMP_RATE_6MV_PER_US;
break;
case 6001 ... 10000:
break;
default:
pr_warn("%s ramp_delay: %d not supported, setting 10000\n",
rdev->desc->name, ramp_delay);
}
return regmap_update_bits(rdev->regmap, reg,
RK808_RAMP_RATE_MASK, ramp_value);
}
/*
* RK817 RK809
*/
static int rk817_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RK817_RAMP_RATE_25MV_PER_US;
unsigned int reg = RK817_BUCK_CONFIG_REG(rdev_get_id(rdev));
switch (ramp_delay) {
case 0 ... 3000:
ramp_value = RK817_RAMP_RATE_3MV_PER_US;
break;
case 3001 ... 6300:
ramp_value = RK817_RAMP_RATE_6_3MV_PER_US;
break;
case 6301 ... 12500:
ramp_value = RK817_RAMP_RATE_12_5MV_PER_US;
break;
case 12501 ... 25000:
break;
default:
dev_warn(&rdev->dev,
"%s ramp_delay: %d not supported, setting 10000\n",
rdev->desc->name, ramp_delay);
}
return regmap_update_bits(rdev->regmap, reg,
RK817_RAMP_RATE_MASK, ramp_value);
}
static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear(rdev, uv, uv);
if (sel < 0)
return -EINVAL;
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->vsel_mask,
sel);
}
static int rk817_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear(rdev, uv, uv);
/* only ldo1~ldo9 */
if (sel < 0)
return -EINVAL;
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->vsel_mask,
sel);
}
static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
{
unsigned int reg;
int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
if (sel < 0)
return -EINVAL;
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->vsel_mask,
sel);
}
static int rk805_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
rdev->desc->enable_mask);
}
static int rk805_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
0);
}
static int rk808_set_suspend_enable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
0);
}
static int rk808_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int reg;
reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
return regmap_update_bits(rdev->regmap, reg,
rdev->desc->enable_mask,
rdev->desc->enable_mask);
}
static int rk817_set_suspend_enable_ctrl(struct regulator_dev *rdev,
unsigned int en)
{
unsigned int reg;
int id = rdev_get_id(rdev);
unsigned int id_slp, msk, val;
if (id >= RK817_ID_DCDC1 && id <= RK817_ID_DCDC4)
id_slp = id;
else if (id >= RK817_ID_LDO1 && id <= RK817_ID_LDO8)
id_slp = 8 + (id - RK817_ID_LDO1);
else if (id >= RK817_ID_LDO9 && id <= RK809_ID_SW2)
id_slp = 4 + (id - RK817_ID_LDO9);
else
return -EINVAL;
reg = RK817_POWER_SLP_EN_REG(id_slp / 8);
msk = BIT(id_slp % 8);
if (en)
val = msk;
else
val = 0;
return regmap_update_bits(rdev->regmap, reg, msk, val);
}
static int rk817_set_suspend_enable(struct regulator_dev *rdev)
{
return rk817_set_suspend_enable_ctrl(rdev, 1);
}
static int rk817_set_suspend_disable(struct regulator_dev *rdev)
{
return rk817_set_suspend_enable_ctrl(rdev, 0);
}
static int rk8xx_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode)
{
unsigned int reg;
reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
switch (mode) {
case REGULATOR_MODE_FAST:
return regmap_update_bits(rdev->regmap, reg,
PWM_MODE_MSK, FPWM_MODE);
case REGULATOR_MODE_NORMAL:
return regmap_update_bits(rdev->regmap, reg,
PWM_MODE_MSK, AUTO_PWM_MODE);
default:
dev_err(&rdev->dev, "do not support this mode\n");
return -EINVAL;
}
return 0;
}
static int rk8xx_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
switch (mode) {
case REGULATOR_MODE_FAST:
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
PWM_MODE_MSK, FPWM_MODE);
case REGULATOR_MODE_NORMAL:
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
PWM_MODE_MSK, AUTO_PWM_MODE);
default:
dev_err(&rdev->dev, "do not support this mode\n");
return -EINVAL;
}
return 0;
}
static unsigned int rk8xx_get_mode(struct regulator_dev *rdev)
{
unsigned int val;
int err;
err = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
if (err)
return err;
if (val & FPWM_MODE)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
}
static int rk8xx_is_enabled_wmsk_regmap(struct regulator_dev *rdev)
{
unsigned int val;
int ret;
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
if (ret != 0)
return ret;
/* add write mask bit */
val |= (rdev->desc->enable_mask & 0xf0);
val &= rdev->desc->enable_mask;
if (rdev->desc->enable_is_inverted) {
if (rdev->desc->enable_val)
return val != rdev->desc->enable_val;
return (val == 0);
}
if (rdev->desc->enable_val)
return val == rdev->desc->enable_val;
return val != 0;
}
static unsigned int rk8xx_regulator_of_map_mode(unsigned int mode)
{
switch (mode) {
case 1:
return REGULATOR_MODE_FAST;
case 2:
return REGULATOR_MODE_NORMAL;
default:
return -EINVAL;
}
}
static const struct regulator_ops rk805_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
};
static const struct regulator_ops rk805_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = rk805_set_suspend_enable,
.set_suspend_disable = rk805_set_suspend_disable,
};
static const struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_ramp_delay = rk808_set_ramp_delay,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_ops rk808_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_ops rk808_reg_ops_ranges = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_ops rk808_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_suspend_enable = rk808_set_suspend_enable,
.set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_linear_range rk805_buck_1_2_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(712500, 0, 59, 12500),
REGULATOR_LINEAR_RANGE(1800000, 60, 62, 200000),
REGULATOR_LINEAR_RANGE(2300000, 63, 63, 0),
};
static struct regulator_ops rk809_buck5_ops_range = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static struct regulator_ops rk817_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_suspend_voltage = rk817_set_suspend_voltage,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static struct regulator_ops rk817_boost_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static struct regulator_ops rk817_buck_ops_range = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_mode = rk8xx_set_mode,
.get_mode = rk8xx_get_mode,
.set_suspend_mode = rk8xx_set_suspend_mode,
.set_ramp_delay = rk817_set_ramp_delay,
.set_suspend_voltage = rk808_set_suspend_voltage_range,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static struct regulator_ops rk817_switch_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = rk8xx_is_enabled_wmsk_regmap,
.set_suspend_enable = rk817_set_suspend_enable,
.set_suspend_disable = rk817_set_suspend_disable,
};
static const struct regulator_desc rk805_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC1,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK1_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC2,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 64,
.linear_ranges = rk805_buck_1_2_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk805_buck_1_2_voltage_ranges),
.vsel_reg = RK805_BUCK2_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK805_ID_DCDC3,
.ops = &rk805_switch_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.enable_reg = RK805_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
},
RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100,
RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
RK805_DCDC_EN_REG, BIT(3), 0),
RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100,
RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(0), 400),
RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100,
RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(1), 400),
RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100,
RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
BIT(2), 400),
};
static const struct regulator_desc rk808_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC1,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC2,
.ops = &rk808_buck1_2_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
.vsel_mask = RK808_BUCK_VSEL_MASK,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.enable_reg = RK808_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
},
RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
RK808_DCDC_EN_REG, BIT(3), 0),
RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(0), 400),
RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(1), 400),
{
.name = "LDO_REG3",
.supply_name = "vcc7",
.of_match = of_match_ptr("LDO_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK808_ID_LDO3,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
.vsel_reg = RK808_LDO3_ON_VSEL_REG,
.vsel_mask = RK808_BUCK4_VSEL_MASK,
.enable_reg = RK808_LDO_EN_REG,
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
},
RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(3), 400),
RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(4), 400),
RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(5), 400),
RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(6), 400),
RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
BIT(7), 400),
RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
RK808_DCDC_EN_REG, BIT(5)),
RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
RK808_DCDC_EN_REG, BIT(6)),
};
static const struct regulator_desc rk809_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC1,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK1_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC2,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK2_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC3,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK3_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG4",
.supply_name = "vcc4",
.of_match = of_match_ptr("DCDC_REG4"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC4,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK3_SEL_CNT + 1,
.linear_ranges = rk817_buck3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges),
.vsel_reg = RK817_BUCK4_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
},
{
.name = "DCDC_REG5",
.supply_name = "vcc9",
.of_match = of_match_ptr("DCDC_REG5"),
.regulators_node = of_match_ptr("regulators"),
.id = RK809_ID_DCDC5,
.ops = &rk809_buck5_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK809_BUCK5_SEL_CNT,
.linear_ranges = rk809_buck5_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk809_buck5_voltage_ranges),
.vsel_reg = RK809_BUCK5_CONFIG(0),
.vsel_mask = RK809_BUCK5_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(3),
.enable_mask = ENABLE_MASK(1),
.enable_val = ENABLE_MASK(1),
.disable_val = DISABLE_VAL(1),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
},
RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(3), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC_SWITCH(RK809_ID_SW1, "SWITCH_REG1", "vcc9",
RK817_POWER_EN_REG(3), ENABLE_MASK(2),
DISABLE_VAL(2)),
RK817_DESC_SWITCH(RK809_ID_SW2, "SWITCH_REG2", "vcc8",
RK817_POWER_EN_REG(3), ENABLE_MASK(3),
DISABLE_VAL(3)),
};
static const struct regulator_desc rk817_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC1,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK1_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC1),
.enable_val = ENABLE_MASK(RK817_ID_DCDC1),
.disable_val = DISABLE_VAL(RK817_ID_DCDC1),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC2,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK2_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC2),
.enable_val = ENABLE_MASK(RK817_ID_DCDC2),
.disable_val = DISABLE_VAL(RK817_ID_DCDC2),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC3,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK1_SEL_CNT + 1,
.linear_ranges = rk817_buck1_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck1_voltage_ranges),
.vsel_reg = RK817_BUCK3_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC3),
.enable_val = ENABLE_MASK(RK817_ID_DCDC3),
.disable_val = DISABLE_VAL(RK817_ID_DCDC3),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG4",
.supply_name = "vcc4",
.of_match = of_match_ptr("DCDC_REG4"),
.regulators_node = of_match_ptr("regulators"),
.id = RK817_ID_DCDC4,
.ops = &rk817_buck_ops_range,
.type = REGULATOR_VOLTAGE,
.n_voltages = RK817_BUCK3_SEL_CNT + 1,
.linear_ranges = rk817_buck3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk817_buck3_voltage_ranges),
.vsel_reg = RK817_BUCK4_ON_VSEL_REG,
.vsel_mask = RK817_BUCK_VSEL_MASK,
.enable_reg = RK817_POWER_EN_REG(0),
.enable_mask = ENABLE_MASK(RK817_ID_DCDC4),
.enable_val = ENABLE_MASK(RK817_ID_DCDC4),
.disable_val = DISABLE_VAL(RK817_ID_DCDC4),
.of_map_mode = rk8xx_regulator_of_map_mode,
.owner = THIS_MODULE,
},
RK817_DESC(RK817_ID_LDO1, "LDO_REG1", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(0), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC(RK817_ID_LDO2, "LDO_REG2", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(1), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
RK817_DESC(RK817_ID_LDO3, "LDO_REG3", "vcc5", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(2), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
RK817_DESC(RK817_ID_LDO4, "LDO_REG4", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(3), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(1), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
RK817_DESC(RK817_ID_LDO5, "LDO_REG5", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(4), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_DESC(RK817_ID_LDO6, "LDO_REG6", "vcc6", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(5), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(1),
DISABLE_VAL(1), 400),
RK817_DESC(RK817_ID_LDO7, "LDO_REG7", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(6), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(2),
DISABLE_VAL(2), 400),
RK817_DESC(RK817_ID_LDO8, "LDO_REG8", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(7), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(2), ENABLE_MASK(3),
DISABLE_VAL(3), 400),
RK817_DESC(RK817_ID_LDO9, "LDO_REG9", "vcc7", 600, 3400, 25,
RK817_LDO_ON_VSEL_REG(8), RK817_LDO_VSEL_MASK,
RK817_POWER_EN_REG(3), ENABLE_MASK(0),
DISABLE_VAL(0), 400),
RK817_BOOST_DESC(RK817_ID_BOOST, "BOOST", "vcc8", 4700, 5400, 100,
RK817_BOOST_OTG_CFG, RK817_BOOST_VSEL_MASK,
RK817_POWER_EN_REG(3), ENABLE_MASK(1), ENABLE_MASK(1),
DISABLE_VAL(1), 400, 3500 - 5400),
RK817_DESC_SWITCH(RK817_ID_BOOST_OTG_SW, "OTG_SWITCH", "vcc9",
RK817_POWER_EN_REG(3), ENABLE_MASK(2),
DISABLE_VAL(2)),
};
static const struct regulator_desc rk818_reg[] = {
{
.name = "DCDC_REG1",
.supply_name = "vcc1",
.of_match = of_match_ptr("DCDC_REG1"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_DCDC1,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK818_BUCK1_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(0),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG2",
.supply_name = "vcc2",
.of_match = of_match_ptr("DCDC_REG2"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_DCDC2,
.ops = &rk808_reg_ops,
.type = REGULATOR_VOLTAGE,
.min_uV = 712500,
.uV_step = 12500,
.n_voltages = 64,
.vsel_reg = RK818_BUCK2_ON_VSEL_REG,
.vsel_mask = RK818_BUCK_VSEL_MASK,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(1),
.owner = THIS_MODULE,
}, {
.name = "DCDC_REG3",
.supply_name = "vcc3",
.of_match = of_match_ptr("DCDC_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_DCDC3,
.ops = &rk808_switch_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = 1,
.enable_reg = RK818_DCDC_EN_REG,
.enable_mask = BIT(2),
.owner = THIS_MODULE,
},
RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100,
RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(3), 0),
RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100,
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(4), 0),
RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(0), 400),
RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
RK818_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(1), 400),
{
.name = "LDO_REG3",
.supply_name = "vcc7",
.of_match = of_match_ptr("LDO_REG3"),
.regulators_node = of_match_ptr("regulators"),
.id = RK818_ID_LDO3,
.ops = &rk808_reg_ops_ranges,
.type = REGULATOR_VOLTAGE,
.n_voltages = 16,
.linear_ranges = rk808_ldo3_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
.vsel_reg = RK818_LDO3_ON_VSEL_REG,
.vsel_mask = RK818_LDO3_ON_VSEL_MASK,
.enable_reg = RK818_LDO_EN_REG,
.enable_mask = BIT(2),
.enable_time = 400,
.owner = THIS_MODULE,
},
RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100,
RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(3), 400),
RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100,
RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(4), 400),
RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100,
RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(5), 400),
RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(6), 400),
RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100,
RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG,
BIT(7), 400),
RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100,
RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK,
RK818_DCDC_EN_REG, BIT(5), 400),
RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9",
RK818_DCDC_EN_REG, BIT(6)),
RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v",
RK818_H5V_EN_REG, BIT(0)),
RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb",
RK818_DCDC_EN_REG, BIT(7)),
};
static int rk808_regulator_dt_parse_pdata(struct device *dev,
struct device *client_dev,
struct regmap *map,
struct rk808_regulator_data *pdata)
{
struct device_node *np;
int tmp, ret = 0, i;
np = of_get_child_by_name(client_dev->of_node, "regulators");
if (!np)
return -ENXIO;
for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
pdata->dvs_gpio[i] =
devm_gpiod_get_index_optional(client_dev, "dvs", i,
GPIOD_OUT_LOW);
if (IS_ERR(pdata->dvs_gpio[i])) {
ret = PTR_ERR(pdata->dvs_gpio[i]);
dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
goto dt_parse_end;
}
if (!pdata->dvs_gpio[i]) {
dev_warn(dev, "there is no dvs%d gpio\n", i);
continue;
}
tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
gpiod_is_active_low(pdata->dvs_gpio[i]) ?
0 : tmp);
}
dt_parse_end:
of_node_put(np);
return ret;
}
static int rk808_regulator_probe(struct platform_device *pdev)
{
struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
struct i2c_client *client = rk808->i2c;
struct regulator_config config = {};
struct regulator_dev *rk808_rdev;
struct rk808_regulator_data *pdata;
const struct regulator_desc *regulators;
int ret, i, nregulators;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
rk808->regmap, pdata);
if (ret < 0)
return ret;
platform_set_drvdata(pdev, pdata);
switch (rk808->variant) {
case RK805_ID:
regulators = rk805_reg;
nregulators = RK805_NUM_REGULATORS;
break;
case RK808_ID:
regulators = rk808_reg;
nregulators = RK808_NUM_REGULATORS;
break;
case RK809_ID:
regulators = rk809_reg;
nregulators = RK809_NUM_REGULATORS;
break;
case RK817_ID:
regulators = rk817_reg;
nregulators = RK817_NUM_REGULATORS;
break;
case RK818_ID:
regulators = rk818_reg;
nregulators = RK818_NUM_REGULATORS;
break;
default:
dev_err(&client->dev, "unsupported RK8XX ID %lu\n",
rk808->variant);
return -EINVAL;
}
config.dev = &client->dev;
config.driver_data = pdata;
config.regmap = rk808->regmap;
/* Instantiate the regulators */
for (i = 0; i < nregulators; i++) {
rk808_rdev = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(rk808_rdev)) {
dev_err(&client->dev,
"failed to register %d regulator\n", i);
return PTR_ERR(rk808_rdev);
}
}
return 0;
}
static struct platform_driver rk808_regulator_driver = {
.probe = rk808_regulator_probe,
.driver = {
.name = "rk808-regulator"
},
};
module_platform_driver(rk808_regulator_driver);
MODULE_DESCRIPTION("regulator driver for the RK805/RK808/RK818 series PMICs");
MODULE_AUTHOR("Tony xie <tony.xie@rock-chips.com>");
MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:rk808-regulator");
Reference in New Issue View Git Blame Copy Permalink