mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
4eb61e1a33
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba6
("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver ads131e08 has no spi_device_id for ti,ads131e04
SPI driver ads131e08 has no spi_device_id for ti,ads131e06
Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220921163620.805879-2-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
952 lines
23 KiB
C
952 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
|
|
*
|
|
* Copyright (c) 2020 AVL DiTEST GmbH
|
|
* Tomislav Denis <tomislav.denis@avl.com>
|
|
*
|
|
* Datasheet: https://www.ti.com/lit/ds/symlink/ads131e08.pdf
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
/* Commands */
|
|
#define ADS131E08_CMD_RESET 0x06
|
|
#define ADS131E08_CMD_START 0x08
|
|
#define ADS131E08_CMD_STOP 0x0A
|
|
#define ADS131E08_CMD_OFFSETCAL 0x1A
|
|
#define ADS131E08_CMD_SDATAC 0x11
|
|
#define ADS131E08_CMD_RDATA 0x12
|
|
#define ADS131E08_CMD_RREG(r) (BIT(5) | (r & GENMASK(4, 0)))
|
|
#define ADS131E08_CMD_WREG(r) (BIT(6) | (r & GENMASK(4, 0)))
|
|
|
|
/* Registers */
|
|
#define ADS131E08_ADR_CFG1R 0x01
|
|
#define ADS131E08_ADR_CFG3R 0x03
|
|
#define ADS131E08_ADR_CH0R 0x05
|
|
|
|
/* Configuration register 1 */
|
|
#define ADS131E08_CFG1R_DR_MASK GENMASK(2, 0)
|
|
|
|
/* Configuration register 3 */
|
|
#define ADS131E08_CFG3R_PDB_REFBUF_MASK BIT(7)
|
|
#define ADS131E08_CFG3R_VREF_4V_MASK BIT(5)
|
|
|
|
/* Channel settings register */
|
|
#define ADS131E08_CHR_GAIN_MASK GENMASK(6, 4)
|
|
#define ADS131E08_CHR_MUX_MASK GENMASK(2, 0)
|
|
#define ADS131E08_CHR_PWD_MASK BIT(7)
|
|
|
|
/* ADC misc */
|
|
#define ADS131E08_DEFAULT_DATA_RATE 1
|
|
#define ADS131E08_DEFAULT_PGA_GAIN 1
|
|
#define ADS131E08_DEFAULT_MUX 0
|
|
|
|
#define ADS131E08_VREF_2V4_mV 2400
|
|
#define ADS131E08_VREF_4V_mV 4000
|
|
|
|
#define ADS131E08_WAIT_RESET_CYCLES 18
|
|
#define ADS131E08_WAIT_SDECODE_CYCLES 4
|
|
#define ADS131E08_WAIT_OFFSETCAL_MS 153
|
|
#define ADS131E08_MAX_SETTLING_TIME_MS 6
|
|
|
|
#define ADS131E08_NUM_STATUS_BYTES 3
|
|
#define ADS131E08_NUM_DATA_BYTES_MAX 24
|
|
#define ADS131E08_NUM_DATA_BYTES(dr) (((dr) >= 32) ? 2 : 3)
|
|
#define ADS131E08_NUM_DATA_BITS(dr) (ADS131E08_NUM_DATA_BYTES(dr) * 8)
|
|
#define ADS131E08_NUM_STORAGE_BYTES 4
|
|
|
|
enum ads131e08_ids {
|
|
ads131e04,
|
|
ads131e06,
|
|
ads131e08,
|
|
};
|
|
|
|
struct ads131e08_info {
|
|
unsigned int max_channels;
|
|
const char *name;
|
|
};
|
|
|
|
struct ads131e08_channel_config {
|
|
unsigned int pga_gain;
|
|
unsigned int mux;
|
|
};
|
|
|
|
struct ads131e08_state {
|
|
const struct ads131e08_info *info;
|
|
struct spi_device *spi;
|
|
struct iio_trigger *trig;
|
|
struct clk *adc_clk;
|
|
struct regulator *vref_reg;
|
|
struct ads131e08_channel_config *channel_config;
|
|
unsigned int data_rate;
|
|
unsigned int vref_mv;
|
|
unsigned int sdecode_delay_us;
|
|
unsigned int reset_delay_us;
|
|
unsigned int readback_len;
|
|
struct completion completion;
|
|
struct {
|
|
u8 data[ADS131E08_NUM_DATA_BYTES_MAX];
|
|
s64 ts __aligned(8);
|
|
} tmp_buf;
|
|
|
|
u8 tx_buf[3] __aligned(IIO_DMA_MINALIGN);
|
|
/*
|
|
* Add extra one padding byte to be able to access the last channel
|
|
* value using u32 pointer
|
|
*/
|
|
u8 rx_buf[ADS131E08_NUM_STATUS_BYTES +
|
|
ADS131E08_NUM_DATA_BYTES_MAX + 1];
|
|
};
|
|
|
|
static const struct ads131e08_info ads131e08_info_tbl[] = {
|
|
[ads131e04] = {
|
|
.max_channels = 4,
|
|
.name = "ads131e04",
|
|
},
|
|
[ads131e06] = {
|
|
.max_channels = 6,
|
|
.name = "ads131e06",
|
|
},
|
|
[ads131e08] = {
|
|
.max_channels = 8,
|
|
.name = "ads131e08",
|
|
},
|
|
};
|
|
|
|
struct ads131e08_data_rate_desc {
|
|
unsigned int rate; /* data rate in kSPS */
|
|
u8 reg; /* reg value */
|
|
};
|
|
|
|
static const struct ads131e08_data_rate_desc ads131e08_data_rate_tbl[] = {
|
|
{ .rate = 64, .reg = 0x00 },
|
|
{ .rate = 32, .reg = 0x01 },
|
|
{ .rate = 16, .reg = 0x02 },
|
|
{ .rate = 8, .reg = 0x03 },
|
|
{ .rate = 4, .reg = 0x04 },
|
|
{ .rate = 2, .reg = 0x05 },
|
|
{ .rate = 1, .reg = 0x06 },
|
|
};
|
|
|
|
struct ads131e08_pga_gain_desc {
|
|
unsigned int gain; /* PGA gain value */
|
|
u8 reg; /* field value */
|
|
};
|
|
|
|
static const struct ads131e08_pga_gain_desc ads131e08_pga_gain_tbl[] = {
|
|
{ .gain = 1, .reg = 0x01 },
|
|
{ .gain = 2, .reg = 0x02 },
|
|
{ .gain = 4, .reg = 0x04 },
|
|
{ .gain = 8, .reg = 0x05 },
|
|
{ .gain = 12, .reg = 0x06 },
|
|
};
|
|
|
|
static const u8 ads131e08_valid_channel_mux_values[] = { 0, 1, 3, 4 };
|
|
|
|
static int ads131e08_exec_cmd(struct ads131e08_state *st, u8 cmd)
|
|
{
|
|
int ret;
|
|
|
|
ret = spi_write_then_read(st->spi, &cmd, 1, NULL, 0);
|
|
if (ret)
|
|
dev_err(&st->spi->dev, "Exec cmd(%02x) failed\n", cmd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ads131e08_read_reg(struct ads131e08_state *st, u8 reg)
|
|
{
|
|
int ret;
|
|
struct spi_transfer transfer[] = {
|
|
{
|
|
.tx_buf = &st->tx_buf,
|
|
.len = 2,
|
|
.delay = {
|
|
.value = st->sdecode_delay_us,
|
|
.unit = SPI_DELAY_UNIT_USECS,
|
|
},
|
|
}, {
|
|
.rx_buf = &st->rx_buf,
|
|
.len = 1,
|
|
},
|
|
};
|
|
|
|
st->tx_buf[0] = ADS131E08_CMD_RREG(reg);
|
|
st->tx_buf[1] = 0;
|
|
|
|
ret = spi_sync_transfer(st->spi, transfer, ARRAY_SIZE(transfer));
|
|
if (ret) {
|
|
dev_err(&st->spi->dev, "Read register failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return st->rx_buf[0];
|
|
}
|
|
|
|
static int ads131e08_write_reg(struct ads131e08_state *st, u8 reg, u8 value)
|
|
{
|
|
int ret;
|
|
struct spi_transfer transfer[] = {
|
|
{
|
|
.tx_buf = &st->tx_buf,
|
|
.len = 3,
|
|
.delay = {
|
|
.value = st->sdecode_delay_us,
|
|
.unit = SPI_DELAY_UNIT_USECS,
|
|
},
|
|
}
|
|
};
|
|
|
|
st->tx_buf[0] = ADS131E08_CMD_WREG(reg);
|
|
st->tx_buf[1] = 0;
|
|
st->tx_buf[2] = value;
|
|
|
|
ret = spi_sync_transfer(st->spi, transfer, ARRAY_SIZE(transfer));
|
|
if (ret)
|
|
dev_err(&st->spi->dev, "Write register failed\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ads131e08_read_data(struct ads131e08_state *st, int rx_len)
|
|
{
|
|
int ret;
|
|
struct spi_transfer transfer[] = {
|
|
{
|
|
.tx_buf = &st->tx_buf,
|
|
.len = 1,
|
|
}, {
|
|
.rx_buf = &st->rx_buf,
|
|
.len = rx_len,
|
|
},
|
|
};
|
|
|
|
st->tx_buf[0] = ADS131E08_CMD_RDATA;
|
|
|
|
ret = spi_sync_transfer(st->spi, transfer, ARRAY_SIZE(transfer));
|
|
if (ret)
|
|
dev_err(&st->spi->dev, "Read data failed\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ads131e08_set_data_rate(struct ads131e08_state *st, int data_rate)
|
|
{
|
|
int i, reg, ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ads131e08_data_rate_tbl); i++) {
|
|
if (ads131e08_data_rate_tbl[i].rate == data_rate)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(ads131e08_data_rate_tbl)) {
|
|
dev_err(&st->spi->dev, "invalid data rate value\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = ads131e08_read_reg(st, ADS131E08_ADR_CFG1R);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= ~ADS131E08_CFG1R_DR_MASK;
|
|
reg |= FIELD_PREP(ADS131E08_CFG1R_DR_MASK,
|
|
ads131e08_data_rate_tbl[i].reg);
|
|
|
|
ret = ads131e08_write_reg(st, ADS131E08_ADR_CFG1R, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
st->data_rate = data_rate;
|
|
st->readback_len = ADS131E08_NUM_STATUS_BYTES +
|
|
ADS131E08_NUM_DATA_BYTES(st->data_rate) *
|
|
st->info->max_channels;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ads131e08_pga_gain_to_field_value(struct ads131e08_state *st,
|
|
unsigned int pga_gain)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ads131e08_pga_gain_tbl); i++) {
|
|
if (ads131e08_pga_gain_tbl[i].gain == pga_gain)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(ads131e08_pga_gain_tbl)) {
|
|
dev_err(&st->spi->dev, "invalid PGA gain value\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ads131e08_pga_gain_tbl[i].reg;
|
|
}
|
|
|
|
static int ads131e08_set_pga_gain(struct ads131e08_state *st,
|
|
unsigned int channel, unsigned int pga_gain)
|
|
{
|
|
int field_value, reg;
|
|
|
|
field_value = ads131e08_pga_gain_to_field_value(st, pga_gain);
|
|
if (field_value < 0)
|
|
return field_value;
|
|
|
|
reg = ads131e08_read_reg(st, ADS131E08_ADR_CH0R + channel);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= ~ADS131E08_CHR_GAIN_MASK;
|
|
reg |= FIELD_PREP(ADS131E08_CHR_GAIN_MASK, field_value);
|
|
|
|
return ads131e08_write_reg(st, ADS131E08_ADR_CH0R + channel, reg);
|
|
}
|
|
|
|
static int ads131e08_validate_channel_mux(struct ads131e08_state *st,
|
|
unsigned int mux)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ads131e08_valid_channel_mux_values); i++) {
|
|
if (ads131e08_valid_channel_mux_values[i] == mux)
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(ads131e08_valid_channel_mux_values)) {
|
|
dev_err(&st->spi->dev, "invalid channel mux value\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ads131e08_set_channel_mux(struct ads131e08_state *st,
|
|
unsigned int channel, unsigned int mux)
|
|
{
|
|
int reg;
|
|
|
|
reg = ads131e08_read_reg(st, ADS131E08_ADR_CH0R + channel);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= ~ADS131E08_CHR_MUX_MASK;
|
|
reg |= FIELD_PREP(ADS131E08_CHR_MUX_MASK, mux);
|
|
|
|
return ads131e08_write_reg(st, ADS131E08_ADR_CH0R + channel, reg);
|
|
}
|
|
|
|
static int ads131e08_power_down_channel(struct ads131e08_state *st,
|
|
unsigned int channel, bool value)
|
|
{
|
|
int reg;
|
|
|
|
reg = ads131e08_read_reg(st, ADS131E08_ADR_CH0R + channel);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= ~ADS131E08_CHR_PWD_MASK;
|
|
reg |= FIELD_PREP(ADS131E08_CHR_PWD_MASK, value);
|
|
|
|
return ads131e08_write_reg(st, ADS131E08_ADR_CH0R + channel, reg);
|
|
}
|
|
|
|
static int ads131e08_config_reference_voltage(struct ads131e08_state *st)
|
|
{
|
|
int reg;
|
|
|
|
reg = ads131e08_read_reg(st, ADS131E08_ADR_CFG3R);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
reg &= ~ADS131E08_CFG3R_PDB_REFBUF_MASK;
|
|
if (!st->vref_reg) {
|
|
reg |= FIELD_PREP(ADS131E08_CFG3R_PDB_REFBUF_MASK, 1);
|
|
reg &= ~ADS131E08_CFG3R_VREF_4V_MASK;
|
|
reg |= FIELD_PREP(ADS131E08_CFG3R_VREF_4V_MASK,
|
|
st->vref_mv == ADS131E08_VREF_4V_mV);
|
|
}
|
|
|
|
return ads131e08_write_reg(st, ADS131E08_ADR_CFG3R, reg);
|
|
}
|
|
|
|
static int ads131e08_initial_config(struct iio_dev *indio_dev)
|
|
{
|
|
const struct iio_chan_spec *channel = indio_dev->channels;
|
|
struct ads131e08_state *st = iio_priv(indio_dev);
|
|
unsigned long active_channels = 0;
|
|
int ret, i;
|
|
|
|
ret = ads131e08_exec_cmd(st, ADS131E08_CMD_RESET);
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(st->reset_delay_us);
|
|
|
|
/* Disable read data in continuous mode (enabled by default) */
|
|
ret = ads131e08_exec_cmd(st, ADS131E08_CMD_SDATAC);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ads131e08_set_data_rate(st, ADS131E08_DEFAULT_DATA_RATE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ads131e08_config_reference_voltage(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < indio_dev->num_channels; i++) {
|
|
ret = ads131e08_set_pga_gain(st, channel->channel,
|
|
st->channel_config[i].pga_gain);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ads131e08_set_channel_mux(st, channel->channel,
|
|
st->channel_config[i].mux);
|
|
if (ret)
|
|
return ret;
|
|
|
|
active_channels |= BIT(channel->channel);
|
|
channel++;
|
|
}
|
|
|
|
/* Power down unused channels */
|
|
for_each_clear_bit(i, &active_channels, st->info->max_channels) {
|
|
ret = ads131e08_power_down_channel(st, i, true);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Request channel offset calibration */
|
|
ret = ads131e08_exec_cmd(st, ADS131E08_CMD_OFFSETCAL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Channel offset calibration is triggered with the first START
|
|
* command. Since calibration takes more time than settling operation,
|
|
* this causes timeout error when command START is sent first
|
|
* time (e.g. first call of the ads131e08_read_direct method).
|
|
* To avoid this problem offset calibration is triggered here.
|
|
*/
|
|
ret = ads131e08_exec_cmd(st, ADS131E08_CMD_START);
|
|
if (ret)
|
|
return ret;
|
|
|
|
msleep(ADS131E08_WAIT_OFFSETCAL_MS);
|
|
|
|
return ads131e08_exec_cmd(st, ADS131E08_CMD_STOP);
|
|
}
|
|
|
|
static int ads131e08_pool_data(struct ads131e08_state *st)
|
|
{
|
|
unsigned long timeout;
|
|
int ret;
|
|
|
|
reinit_completion(&st->completion);
|
|
|
|
ret = ads131e08_exec_cmd(st, ADS131E08_CMD_START);
|
|
if (ret)
|
|
return ret;
|
|
|
|
timeout = msecs_to_jiffies(ADS131E08_MAX_SETTLING_TIME_MS);
|
|
ret = wait_for_completion_timeout(&st->completion, timeout);
|
|
if (!ret)
|
|
return -ETIMEDOUT;
|
|
|
|
ret = ads131e08_read_data(st, st->readback_len);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return ads131e08_exec_cmd(st, ADS131E08_CMD_STOP);
|
|
}
|
|
|
|
static int ads131e08_read_direct(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *channel, int *value)
|
|
{
|
|
struct ads131e08_state *st = iio_priv(indio_dev);
|
|
u8 num_bits, *src;
|
|
int ret;
|
|
|
|
ret = ads131e08_pool_data(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
src = st->rx_buf + ADS131E08_NUM_STATUS_BYTES +
|
|
channel->channel * ADS131E08_NUM_DATA_BYTES(st->data_rate);
|
|
|
|
num_bits = ADS131E08_NUM_DATA_BITS(st->data_rate);
|
|
*value = sign_extend32(get_unaligned_be32(src) >> (32 - num_bits), num_bits - 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ads131e08_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *channel, int *value,
|
|
int *value2, long mask)
|
|
{
|
|
struct ads131e08_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ads131e08_read_direct(indio_dev, channel, value);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (st->vref_reg) {
|
|
ret = regulator_get_voltage(st->vref_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*value = ret / 1000;
|
|
} else {
|
|
*value = st->vref_mv;
|
|
}
|
|
|
|
*value /= st->channel_config[channel->address].pga_gain;
|
|
*value2 = ADS131E08_NUM_DATA_BITS(st->data_rate) - 1;
|
|
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*value = st->data_rate;
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int ads131e08_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *channel, int value,
|
|
int value2, long mask)
|
|
{
|
|
struct ads131e08_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ads131e08_set_data_rate(st, value);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
return ret;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("1 2 4 8 16 32 64");
|
|
|
|
static struct attribute *ads131e08_attributes[] = {
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group ads131e08_attribute_group = {
|
|
.attrs = ads131e08_attributes,
|
|
};
|
|
|
|
static int ads131e08_debugfs_reg_access(struct iio_dev *indio_dev,
|
|
unsigned int reg, unsigned int writeval, unsigned int *readval)
|
|
{
|
|
struct ads131e08_state *st = iio_priv(indio_dev);
|
|
|
|
if (readval) {
|
|
int ret = ads131e08_read_reg(st, reg);
|
|
*readval = ret;
|
|
return ret;
|
|
}
|
|
|
|
return ads131e08_write_reg(st, reg, writeval);
|
|
}
|
|
|
|
static const struct iio_info ads131e08_iio_info = {
|
|
.read_raw = ads131e08_read_raw,
|
|
.write_raw = ads131e08_write_raw,
|
|
.attrs = &ads131e08_attribute_group,
|
|
.debugfs_reg_access = &ads131e08_debugfs_reg_access,
|
|
};
|
|
|
|
static int ads131e08_set_trigger_state(struct iio_trigger *trig, bool state)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct ads131e08_state *st = iio_priv(indio_dev);
|
|
u8 cmd = state ? ADS131E08_CMD_START : ADS131E08_CMD_STOP;
|
|
|
|
return ads131e08_exec_cmd(st, cmd);
|
|
}
|
|
|
|
static const struct iio_trigger_ops ads131e08_trigger_ops = {
|
|
.set_trigger_state = &ads131e08_set_trigger_state,
|
|
.validate_device = &iio_trigger_validate_own_device,
|
|
};
|
|
|
|
static irqreturn_t ads131e08_trigger_handler(int irq, void *private)
|
|
{
|
|
struct iio_poll_func *pf = private;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct ads131e08_state *st = iio_priv(indio_dev);
|
|
unsigned int chn, i = 0;
|
|
u8 *src, *dest;
|
|
int ret;
|
|
|
|
/*
|
|
* The number of data bits per channel depends on the data rate.
|
|
* For 32 and 64 ksps data rates, number of data bits per channel
|
|
* is 16. This case is not compliant with used (fixed) scan element
|
|
* type (be:s24/32>>8). So we use a little tweak to pack properly
|
|
* 16 bits of data into the buffer.
|
|
*/
|
|
unsigned int num_bytes = ADS131E08_NUM_DATA_BYTES(st->data_rate);
|
|
u8 tweek_offset = num_bytes == 2 ? 1 : 0;
|
|
|
|
if (iio_trigger_using_own(indio_dev))
|
|
ret = ads131e08_read_data(st, st->readback_len);
|
|
else
|
|
ret = ads131e08_pool_data(st);
|
|
|
|
if (ret)
|
|
goto out;
|
|
|
|
for_each_set_bit(chn, indio_dev->active_scan_mask, indio_dev->masklength) {
|
|
src = st->rx_buf + ADS131E08_NUM_STATUS_BYTES + chn * num_bytes;
|
|
dest = st->tmp_buf.data + i * ADS131E08_NUM_STORAGE_BYTES;
|
|
|
|
/*
|
|
* Tweek offset is 0:
|
|
* +---+---+---+---+
|
|
* |D0 |D1 |D2 | X | (3 data bytes)
|
|
* +---+---+---+---+
|
|
* a+0 a+1 a+2 a+3
|
|
*
|
|
* Tweek offset is 1:
|
|
* +---+---+---+---+
|
|
* |P0 |D0 |D1 | X | (one padding byte and 2 data bytes)
|
|
* +---+---+---+---+
|
|
* a+0 a+1 a+2 a+3
|
|
*/
|
|
memcpy(dest + tweek_offset, src, num_bytes);
|
|
|
|
/*
|
|
* Data conversion from 16 bits of data to 24 bits of data
|
|
* is done by sign extension (properly filling padding byte).
|
|
*/
|
|
if (tweek_offset)
|
|
*dest = *src & BIT(7) ? 0xff : 0x00;
|
|
|
|
i++;
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, st->tmp_buf.data,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
out:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t ads131e08_interrupt(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct ads131e08_state *st = iio_priv(indio_dev);
|
|
|
|
if (iio_buffer_enabled(indio_dev) && iio_trigger_using_own(indio_dev))
|
|
iio_trigger_poll(st->trig);
|
|
else
|
|
complete(&st->completion);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ads131e08_alloc_channels(struct iio_dev *indio_dev)
|
|
{
|
|
struct ads131e08_state *st = iio_priv(indio_dev);
|
|
struct ads131e08_channel_config *channel_config;
|
|
struct device *dev = &st->spi->dev;
|
|
struct iio_chan_spec *channels;
|
|
struct fwnode_handle *node;
|
|
unsigned int channel, tmp;
|
|
int num_channels, i, ret;
|
|
|
|
ret = device_property_read_u32(dev, "ti,vref-internal", &tmp);
|
|
if (ret)
|
|
tmp = 0;
|
|
|
|
switch (tmp) {
|
|
case 0:
|
|
st->vref_mv = ADS131E08_VREF_2V4_mV;
|
|
break;
|
|
case 1:
|
|
st->vref_mv = ADS131E08_VREF_4V_mV;
|
|
break;
|
|
default:
|
|
dev_err(&st->spi->dev, "invalid internal voltage reference\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
num_channels = device_get_child_node_count(dev);
|
|
if (num_channels == 0) {
|
|
dev_err(&st->spi->dev, "no channel children\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (num_channels > st->info->max_channels) {
|
|
dev_err(&st->spi->dev, "num of channel children out of range\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
channels = devm_kcalloc(&st->spi->dev, num_channels,
|
|
sizeof(*channels), GFP_KERNEL);
|
|
if (!channels)
|
|
return -ENOMEM;
|
|
|
|
channel_config = devm_kcalloc(&st->spi->dev, num_channels,
|
|
sizeof(*channel_config), GFP_KERNEL);
|
|
if (!channel_config)
|
|
return -ENOMEM;
|
|
|
|
i = 0;
|
|
device_for_each_child_node(dev, node) {
|
|
ret = fwnode_property_read_u32(node, "reg", &channel);
|
|
if (ret)
|
|
goto err_child_out;
|
|
|
|
ret = fwnode_property_read_u32(node, "ti,gain", &tmp);
|
|
if (ret) {
|
|
channel_config[i].pga_gain = ADS131E08_DEFAULT_PGA_GAIN;
|
|
} else {
|
|
ret = ads131e08_pga_gain_to_field_value(st, tmp);
|
|
if (ret < 0)
|
|
goto err_child_out;
|
|
|
|
channel_config[i].pga_gain = tmp;
|
|
}
|
|
|
|
ret = fwnode_property_read_u32(node, "ti,mux", &tmp);
|
|
if (ret) {
|
|
channel_config[i].mux = ADS131E08_DEFAULT_MUX;
|
|
} else {
|
|
ret = ads131e08_validate_channel_mux(st, tmp);
|
|
if (ret)
|
|
goto err_child_out;
|
|
|
|
channel_config[i].mux = tmp;
|
|
}
|
|
|
|
channels[i].type = IIO_VOLTAGE;
|
|
channels[i].indexed = 1;
|
|
channels[i].channel = channel;
|
|
channels[i].address = i;
|
|
channels[i].info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE);
|
|
channels[i].info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ);
|
|
channels[i].scan_index = channel;
|
|
channels[i].scan_type.sign = 's';
|
|
channels[i].scan_type.realbits = 24;
|
|
channels[i].scan_type.storagebits = 32;
|
|
channels[i].scan_type.shift = 8;
|
|
channels[i].scan_type.endianness = IIO_BE;
|
|
i++;
|
|
}
|
|
|
|
indio_dev->channels = channels;
|
|
indio_dev->num_channels = num_channels;
|
|
st->channel_config = channel_config;
|
|
|
|
return 0;
|
|
|
|
err_child_out:
|
|
fwnode_handle_put(node);
|
|
return ret;
|
|
}
|
|
|
|
static void ads131e08_regulator_disable(void *data)
|
|
{
|
|
struct ads131e08_state *st = data;
|
|
|
|
regulator_disable(st->vref_reg);
|
|
}
|
|
|
|
static int ads131e08_probe(struct spi_device *spi)
|
|
{
|
|
const struct ads131e08_info *info;
|
|
struct ads131e08_state *st;
|
|
struct iio_dev *indio_dev;
|
|
unsigned long adc_clk_hz;
|
|
unsigned long adc_clk_ns;
|
|
int ret;
|
|
|
|
info = device_get_match_data(&spi->dev);
|
|
if (!info)
|
|
info = (void *)spi_get_device_id(spi)->driver_data;
|
|
if (!info) {
|
|
dev_err(&spi->dev, "failed to get match data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (!indio_dev) {
|
|
dev_err(&spi->dev, "failed to allocate IIO device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
st = iio_priv(indio_dev);
|
|
st->info = info;
|
|
st->spi = spi;
|
|
|
|
ret = ads131e08_alloc_channels(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
indio_dev->name = st->info->name;
|
|
indio_dev->info = &ads131e08_iio_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
init_completion(&st->completion);
|
|
|
|
if (spi->irq) {
|
|
ret = devm_request_irq(&spi->dev, spi->irq,
|
|
ads131e08_interrupt,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
spi->dev.driver->name, indio_dev);
|
|
if (ret)
|
|
return dev_err_probe(&spi->dev, ret,
|
|
"request irq failed\n");
|
|
} else {
|
|
dev_err(&spi->dev, "data ready IRQ missing\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
|
|
indio_dev->name, iio_device_id(indio_dev));
|
|
if (!st->trig) {
|
|
dev_err(&spi->dev, "failed to allocate IIO trigger\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
st->trig->ops = &ads131e08_trigger_ops;
|
|
st->trig->dev.parent = &spi->dev;
|
|
iio_trigger_set_drvdata(st->trig, indio_dev);
|
|
ret = devm_iio_trigger_register(&spi->dev, st->trig);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "failed to register IIO trigger\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
indio_dev->trig = iio_trigger_get(st->trig);
|
|
|
|
ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
|
|
NULL, &ads131e08_trigger_handler, NULL);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "failed to setup IIO buffer\n");
|
|
return ret;
|
|
}
|
|
|
|
st->vref_reg = devm_regulator_get_optional(&spi->dev, "vref");
|
|
if (!IS_ERR(st->vref_reg)) {
|
|
ret = regulator_enable(st->vref_reg);
|
|
if (ret) {
|
|
dev_err(&spi->dev,
|
|
"failed to enable external vref supply\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(&spi->dev, ads131e08_regulator_disable, st);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
if (PTR_ERR(st->vref_reg) != -ENODEV)
|
|
return PTR_ERR(st->vref_reg);
|
|
|
|
st->vref_reg = NULL;
|
|
}
|
|
|
|
st->adc_clk = devm_clk_get_enabled(&spi->dev, "adc-clk");
|
|
if (IS_ERR(st->adc_clk))
|
|
return dev_err_probe(&spi->dev, PTR_ERR(st->adc_clk),
|
|
"failed to get the ADC clock\n");
|
|
|
|
adc_clk_hz = clk_get_rate(st->adc_clk);
|
|
if (!adc_clk_hz) {
|
|
dev_err(&spi->dev, "failed to get the ADC clock rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
adc_clk_ns = NSEC_PER_SEC / adc_clk_hz;
|
|
st->sdecode_delay_us = DIV_ROUND_UP(
|
|
ADS131E08_WAIT_SDECODE_CYCLES * adc_clk_ns, NSEC_PER_USEC);
|
|
st->reset_delay_us = DIV_ROUND_UP(
|
|
ADS131E08_WAIT_RESET_CYCLES * adc_clk_ns, NSEC_PER_USEC);
|
|
|
|
ret = ads131e08_initial_config(indio_dev);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "initial configuration failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return devm_iio_device_register(&spi->dev, indio_dev);
|
|
}
|
|
|
|
static const struct of_device_id ads131e08_of_match[] = {
|
|
{ .compatible = "ti,ads131e04",
|
|
.data = &ads131e08_info_tbl[ads131e04], },
|
|
{ .compatible = "ti,ads131e06",
|
|
.data = &ads131e08_info_tbl[ads131e06], },
|
|
{ .compatible = "ti,ads131e08",
|
|
.data = &ads131e08_info_tbl[ads131e08], },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ads131e08_of_match);
|
|
|
|
static const struct spi_device_id ads131e08_ids[] = {
|
|
{ "ads131e04", (kernel_ulong_t)&ads131e08_info_tbl[ads131e04] },
|
|
{ "ads131e06", (kernel_ulong_t)&ads131e08_info_tbl[ads131e06] },
|
|
{ "ads131e08", (kernel_ulong_t)&ads131e08_info_tbl[ads131e08] },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ads131e08_ids);
|
|
|
|
static struct spi_driver ads131e08_driver = {
|
|
.driver = {
|
|
.name = "ads131e08",
|
|
.of_match_table = ads131e08_of_match,
|
|
},
|
|
.probe = ads131e08_probe,
|
|
.id_table = ads131e08_ids,
|
|
};
|
|
module_spi_driver(ads131e08_driver);
|
|
|
|
MODULE_AUTHOR("Tomislav Denis <tomislav.denis@avl.com>");
|
|
MODULE_DESCRIPTION("Driver for ADS131E0x ADC family");
|
|
MODULE_LICENSE("GPL v2");
|