mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
20228a1d5a
Drop 'mlock' usage by making use of iio_device_claim_direct_mode().
This change actually makes sure we cannot do a single conversion while
buffering is enable. Note there was a potential race in the previous
code since we were only acquiring the lock after checking if the bus is
enabled.
Fixes: af3008485e
("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: <Stable@vger.kernel.org> #No rush as race is very old.
Link: https://lore.kernel.org/r/20220920112821.975359-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
676 lines
17 KiB
C
676 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Support code for Analog Devices Sigma-Delta ADCs
|
|
*
|
|
* Copyright 2012 Analog Devices Inc.
|
|
* Author: Lars-Peter Clausen <lars@metafoo.de>
|
|
*/
|
|
|
|
#include <linux/align.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/adc/ad_sigma_delta.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
|
|
#define AD_SD_COMM_CHAN_MASK 0x3
|
|
|
|
#define AD_SD_REG_COMM 0x00
|
|
#define AD_SD_REG_DATA 0x03
|
|
|
|
/**
|
|
* ad_sd_set_comm() - Set communications register
|
|
*
|
|
* @sigma_delta: The sigma delta device
|
|
* @comm: New value for the communications register
|
|
*/
|
|
void ad_sd_set_comm(struct ad_sigma_delta *sigma_delta, uint8_t comm)
|
|
{
|
|
/* Some variants use the lower two bits of the communications register
|
|
* to select the channel */
|
|
sigma_delta->comm = comm & AD_SD_COMM_CHAN_MASK;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(ad_sd_set_comm, IIO_AD_SIGMA_DELTA);
|
|
|
|
/**
|
|
* ad_sd_write_reg() - Write a register
|
|
*
|
|
* @sigma_delta: The sigma delta device
|
|
* @reg: Address of the register
|
|
* @size: Size of the register (0-3)
|
|
* @val: Value to write to the register
|
|
*
|
|
* Returns 0 on success, an error code otherwise.
|
|
**/
|
|
int ad_sd_write_reg(struct ad_sigma_delta *sigma_delta, unsigned int reg,
|
|
unsigned int size, unsigned int val)
|
|
{
|
|
uint8_t *data = sigma_delta->tx_buf;
|
|
struct spi_transfer t = {
|
|
.tx_buf = data,
|
|
.len = size + 1,
|
|
.cs_change = sigma_delta->keep_cs_asserted,
|
|
};
|
|
struct spi_message m;
|
|
int ret;
|
|
|
|
data[0] = (reg << sigma_delta->info->addr_shift) | sigma_delta->comm;
|
|
|
|
switch (size) {
|
|
case 3:
|
|
put_unaligned_be24(val, &data[1]);
|
|
break;
|
|
case 2:
|
|
put_unaligned_be16(val, &data[1]);
|
|
break;
|
|
case 1:
|
|
data[1] = val;
|
|
break;
|
|
case 0:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
spi_message_init(&m);
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
if (sigma_delta->bus_locked)
|
|
ret = spi_sync_locked(sigma_delta->spi, &m);
|
|
else
|
|
ret = spi_sync(sigma_delta->spi, &m);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(ad_sd_write_reg, IIO_AD_SIGMA_DELTA);
|
|
|
|
static int ad_sd_read_reg_raw(struct ad_sigma_delta *sigma_delta,
|
|
unsigned int reg, unsigned int size, uint8_t *val)
|
|
{
|
|
uint8_t *data = sigma_delta->tx_buf;
|
|
int ret;
|
|
struct spi_transfer t[] = {
|
|
{
|
|
.tx_buf = data,
|
|
.len = 1,
|
|
}, {
|
|
.rx_buf = val,
|
|
.len = size,
|
|
.cs_change = sigma_delta->bus_locked,
|
|
},
|
|
};
|
|
struct spi_message m;
|
|
|
|
spi_message_init(&m);
|
|
|
|
if (sigma_delta->info->has_registers) {
|
|
data[0] = reg << sigma_delta->info->addr_shift;
|
|
data[0] |= sigma_delta->info->read_mask;
|
|
data[0] |= sigma_delta->comm;
|
|
spi_message_add_tail(&t[0], &m);
|
|
}
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
if (sigma_delta->bus_locked)
|
|
ret = spi_sync_locked(sigma_delta->spi, &m);
|
|
else
|
|
ret = spi_sync(sigma_delta->spi, &m);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ad_sd_read_reg() - Read a register
|
|
*
|
|
* @sigma_delta: The sigma delta device
|
|
* @reg: Address of the register
|
|
* @size: Size of the register (1-4)
|
|
* @val: Read value
|
|
*
|
|
* Returns 0 on success, an error code otherwise.
|
|
**/
|
|
int ad_sd_read_reg(struct ad_sigma_delta *sigma_delta,
|
|
unsigned int reg, unsigned int size, unsigned int *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = ad_sd_read_reg_raw(sigma_delta, reg, size, sigma_delta->rx_buf);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
switch (size) {
|
|
case 4:
|
|
*val = get_unaligned_be32(sigma_delta->rx_buf);
|
|
break;
|
|
case 3:
|
|
*val = get_unaligned_be24(sigma_delta->rx_buf);
|
|
break;
|
|
case 2:
|
|
*val = get_unaligned_be16(sigma_delta->rx_buf);
|
|
break;
|
|
case 1:
|
|
*val = sigma_delta->rx_buf[0];
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(ad_sd_read_reg, IIO_AD_SIGMA_DELTA);
|
|
|
|
/**
|
|
* ad_sd_reset() - Reset the serial interface
|
|
*
|
|
* @sigma_delta: The sigma delta device
|
|
* @reset_length: Number of SCLKs with DIN = 1
|
|
*
|
|
* Returns 0 on success, an error code otherwise.
|
|
**/
|
|
int ad_sd_reset(struct ad_sigma_delta *sigma_delta,
|
|
unsigned int reset_length)
|
|
{
|
|
uint8_t *buf;
|
|
unsigned int size;
|
|
int ret;
|
|
|
|
size = DIV_ROUND_UP(reset_length, 8);
|
|
buf = kcalloc(size, sizeof(*buf), GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
memset(buf, 0xff, size);
|
|
ret = spi_write(sigma_delta->spi, buf, size);
|
|
kfree(buf);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(ad_sd_reset, IIO_AD_SIGMA_DELTA);
|
|
|
|
int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
|
|
unsigned int mode, unsigned int channel)
|
|
{
|
|
int ret;
|
|
unsigned long timeout;
|
|
|
|
ret = ad_sigma_delta_set_channel(sigma_delta, channel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
spi_bus_lock(sigma_delta->spi->master);
|
|
sigma_delta->bus_locked = true;
|
|
sigma_delta->keep_cs_asserted = true;
|
|
reinit_completion(&sigma_delta->completion);
|
|
|
|
ret = ad_sigma_delta_set_mode(sigma_delta, mode);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
sigma_delta->irq_dis = false;
|
|
enable_irq(sigma_delta->spi->irq);
|
|
timeout = wait_for_completion_timeout(&sigma_delta->completion, 2 * HZ);
|
|
if (timeout == 0) {
|
|
sigma_delta->irq_dis = true;
|
|
disable_irq_nosync(sigma_delta->spi->irq);
|
|
ret = -EIO;
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
out:
|
|
sigma_delta->keep_cs_asserted = false;
|
|
ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
|
|
sigma_delta->bus_locked = false;
|
|
spi_bus_unlock(sigma_delta->spi->master);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(ad_sd_calibrate, IIO_AD_SIGMA_DELTA);
|
|
|
|
/**
|
|
* ad_sd_calibrate_all() - Performs channel calibration
|
|
* @sigma_delta: The sigma delta device
|
|
* @cb: Array of channels and calibration type to perform
|
|
* @n: Number of items in cb
|
|
*
|
|
* Returns 0 on success, an error code otherwise.
|
|
**/
|
|
int ad_sd_calibrate_all(struct ad_sigma_delta *sigma_delta,
|
|
const struct ad_sd_calib_data *cb, unsigned int n)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < n; i++) {
|
|
ret = ad_sd_calibrate(sigma_delta, cb[i].mode, cb[i].channel);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(ad_sd_calibrate_all, IIO_AD_SIGMA_DELTA);
|
|
|
|
/**
|
|
* ad_sigma_delta_single_conversion() - Performs a single data conversion
|
|
* @indio_dev: The IIO device
|
|
* @chan: The conversion is done for this channel
|
|
* @val: Pointer to the location where to store the read value
|
|
*
|
|
* Returns: 0 on success, an error value otherwise.
|
|
*/
|
|
int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, int *val)
|
|
{
|
|
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
|
|
unsigned int sample, raw_sample;
|
|
unsigned int data_reg;
|
|
int ret = 0;
|
|
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ad_sigma_delta_set_channel(sigma_delta, chan->address);
|
|
|
|
spi_bus_lock(sigma_delta->spi->master);
|
|
sigma_delta->bus_locked = true;
|
|
sigma_delta->keep_cs_asserted = true;
|
|
reinit_completion(&sigma_delta->completion);
|
|
|
|
ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_SINGLE);
|
|
|
|
sigma_delta->irq_dis = false;
|
|
enable_irq(sigma_delta->spi->irq);
|
|
ret = wait_for_completion_interruptible_timeout(
|
|
&sigma_delta->completion, HZ);
|
|
|
|
if (ret == 0)
|
|
ret = -EIO;
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (sigma_delta->info->data_reg != 0)
|
|
data_reg = sigma_delta->info->data_reg;
|
|
else
|
|
data_reg = AD_SD_REG_DATA;
|
|
|
|
ret = ad_sd_read_reg(sigma_delta, data_reg,
|
|
DIV_ROUND_UP(chan->scan_type.realbits + chan->scan_type.shift, 8),
|
|
&raw_sample);
|
|
|
|
out:
|
|
if (!sigma_delta->irq_dis) {
|
|
disable_irq_nosync(sigma_delta->spi->irq);
|
|
sigma_delta->irq_dis = true;
|
|
}
|
|
|
|
sigma_delta->keep_cs_asserted = false;
|
|
ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
|
|
sigma_delta->bus_locked = false;
|
|
spi_bus_unlock(sigma_delta->spi->master);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
sample = raw_sample >> chan->scan_type.shift;
|
|
sample &= (1 << chan->scan_type.realbits) - 1;
|
|
*val = sample;
|
|
|
|
ret = ad_sigma_delta_postprocess_sample(sigma_delta, raw_sample);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(ad_sigma_delta_single_conversion, IIO_AD_SIGMA_DELTA);
|
|
|
|
static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
|
|
unsigned int i, slot, samples_buf_size;
|
|
unsigned int channel;
|
|
uint8_t *samples_buf;
|
|
int ret;
|
|
|
|
if (sigma_delta->num_slots == 1) {
|
|
channel = find_first_bit(indio_dev->active_scan_mask,
|
|
indio_dev->masklength);
|
|
ret = ad_sigma_delta_set_channel(sigma_delta,
|
|
indio_dev->channels[channel].address);
|
|
if (ret)
|
|
return ret;
|
|
slot = 1;
|
|
} else {
|
|
/*
|
|
* At this point update_scan_mode already enabled the required channels.
|
|
* For sigma-delta sequencer drivers with multiple slots, an update_scan_mode
|
|
* implementation is mandatory.
|
|
*/
|
|
slot = 0;
|
|
for_each_set_bit(i, indio_dev->active_scan_mask, indio_dev->masklength) {
|
|
sigma_delta->slots[slot] = indio_dev->channels[i].address;
|
|
slot++;
|
|
}
|
|
}
|
|
|
|
sigma_delta->active_slots = slot;
|
|
sigma_delta->current_slot = 0;
|
|
|
|
if (sigma_delta->active_slots > 1) {
|
|
ret = ad_sigma_delta_append_status(sigma_delta, true);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
samples_buf_size = ALIGN(slot * indio_dev->channels[0].scan_type.storagebits, 8);
|
|
samples_buf_size += sizeof(int64_t);
|
|
samples_buf = devm_krealloc(&sigma_delta->spi->dev, sigma_delta->samples_buf,
|
|
samples_buf_size, GFP_KERNEL);
|
|
if (!samples_buf)
|
|
return -ENOMEM;
|
|
|
|
sigma_delta->samples_buf = samples_buf;
|
|
|
|
spi_bus_lock(sigma_delta->spi->master);
|
|
sigma_delta->bus_locked = true;
|
|
sigma_delta->keep_cs_asserted = true;
|
|
|
|
ret = ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_CONTINUOUS);
|
|
if (ret)
|
|
goto err_unlock;
|
|
|
|
sigma_delta->irq_dis = false;
|
|
enable_irq(sigma_delta->spi->irq);
|
|
|
|
return 0;
|
|
|
|
err_unlock:
|
|
spi_bus_unlock(sigma_delta->spi->master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ad_sd_buffer_postdisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
|
|
|
|
reinit_completion(&sigma_delta->completion);
|
|
wait_for_completion_timeout(&sigma_delta->completion, HZ);
|
|
|
|
if (!sigma_delta->irq_dis) {
|
|
disable_irq_nosync(sigma_delta->spi->irq);
|
|
sigma_delta->irq_dis = true;
|
|
}
|
|
|
|
sigma_delta->keep_cs_asserted = false;
|
|
ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
|
|
|
|
if (sigma_delta->status_appended)
|
|
ad_sigma_delta_append_status(sigma_delta, false);
|
|
|
|
ad_sigma_delta_disable_all(sigma_delta);
|
|
sigma_delta->bus_locked = false;
|
|
return spi_bus_unlock(sigma_delta->spi->master);
|
|
}
|
|
|
|
static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
|
|
uint8_t *data = sigma_delta->rx_buf;
|
|
unsigned int transfer_size;
|
|
unsigned int sample_size;
|
|
unsigned int sample_pos;
|
|
unsigned int status_pos;
|
|
unsigned int reg_size;
|
|
unsigned int data_reg;
|
|
|
|
reg_size = indio_dev->channels[0].scan_type.realbits +
|
|
indio_dev->channels[0].scan_type.shift;
|
|
reg_size = DIV_ROUND_UP(reg_size, 8);
|
|
|
|
if (sigma_delta->info->data_reg != 0)
|
|
data_reg = sigma_delta->info->data_reg;
|
|
else
|
|
data_reg = AD_SD_REG_DATA;
|
|
|
|
/* Status word will be appended to the sample during transfer */
|
|
if (sigma_delta->status_appended)
|
|
transfer_size = reg_size + 1;
|
|
else
|
|
transfer_size = reg_size;
|
|
|
|
switch (reg_size) {
|
|
case 4:
|
|
case 2:
|
|
case 1:
|
|
status_pos = reg_size;
|
|
ad_sd_read_reg_raw(sigma_delta, data_reg, transfer_size, &data[0]);
|
|
break;
|
|
case 3:
|
|
/*
|
|
* Data array after transfer will look like (if status is appended):
|
|
* data[] = { [0][sample][sample][sample][status] }
|
|
* Keeping the first byte 0 shifts the status postion by 1 byte to the right.
|
|
*/
|
|
status_pos = reg_size + 1;
|
|
|
|
/* We store 24 bit samples in a 32 bit word. Keep the upper
|
|
* byte set to zero. */
|
|
ad_sd_read_reg_raw(sigma_delta, data_reg, transfer_size, &data[1]);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* For devices sampling only one channel at
|
|
* once, there is no need for sample number tracking.
|
|
*/
|
|
if (sigma_delta->active_slots == 1) {
|
|
iio_push_to_buffers_with_timestamp(indio_dev, data, pf->timestamp);
|
|
goto irq_handled;
|
|
}
|
|
|
|
if (sigma_delta->status_appended) {
|
|
u8 converted_channel;
|
|
|
|
converted_channel = data[status_pos] & sigma_delta->info->status_ch_mask;
|
|
if (converted_channel != sigma_delta->slots[sigma_delta->current_slot]) {
|
|
/*
|
|
* Desync occurred during continuous sampling of multiple channels.
|
|
* Drop this incomplete sample and start from first channel again.
|
|
*/
|
|
|
|
sigma_delta->current_slot = 0;
|
|
goto irq_handled;
|
|
}
|
|
}
|
|
|
|
sample_size = indio_dev->channels[0].scan_type.storagebits / 8;
|
|
sample_pos = sample_size * sigma_delta->current_slot;
|
|
memcpy(&sigma_delta->samples_buf[sample_pos], data, sample_size);
|
|
sigma_delta->current_slot++;
|
|
|
|
if (sigma_delta->current_slot == sigma_delta->active_slots) {
|
|
sigma_delta->current_slot = 0;
|
|
iio_push_to_buffers_with_timestamp(indio_dev, sigma_delta->samples_buf,
|
|
pf->timestamp);
|
|
}
|
|
|
|
irq_handled:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
sigma_delta->irq_dis = false;
|
|
enable_irq(sigma_delta->spi->irq);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static bool ad_sd_validate_scan_mask(struct iio_dev *indio_dev, const unsigned long *mask)
|
|
{
|
|
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
|
|
|
|
return bitmap_weight(mask, indio_dev->masklength) <= sigma_delta->num_slots;
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops ad_sd_buffer_setup_ops = {
|
|
.postenable = &ad_sd_buffer_postenable,
|
|
.postdisable = &ad_sd_buffer_postdisable,
|
|
.validate_scan_mask = &ad_sd_validate_scan_mask,
|
|
};
|
|
|
|
static irqreturn_t ad_sd_data_rdy_trig_poll(int irq, void *private)
|
|
{
|
|
struct ad_sigma_delta *sigma_delta = private;
|
|
|
|
complete(&sigma_delta->completion);
|
|
disable_irq_nosync(irq);
|
|
sigma_delta->irq_dis = true;
|
|
iio_trigger_poll(sigma_delta->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/**
|
|
* ad_sd_validate_trigger() - validate_trigger callback for ad_sigma_delta devices
|
|
* @indio_dev: The IIO device
|
|
* @trig: The new trigger
|
|
*
|
|
* Returns: 0 if the 'trig' matches the trigger registered by the ad_sigma_delta
|
|
* device, -EINVAL otherwise.
|
|
*/
|
|
int ad_sd_validate_trigger(struct iio_dev *indio_dev, struct iio_trigger *trig)
|
|
{
|
|
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
|
|
|
|
if (sigma_delta->trig != trig)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(ad_sd_validate_trigger, IIO_AD_SIGMA_DELTA);
|
|
|
|
static int devm_ad_sd_probe_trigger(struct device *dev, struct iio_dev *indio_dev)
|
|
{
|
|
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
|
|
int ret;
|
|
|
|
if (dev != &sigma_delta->spi->dev) {
|
|
dev_err(dev, "Trigger parent should be '%s', got '%s'\n",
|
|
dev_name(dev), dev_name(&sigma_delta->spi->dev));
|
|
return -EFAULT;
|
|
}
|
|
|
|
sigma_delta->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name,
|
|
iio_device_id(indio_dev));
|
|
if (sigma_delta->trig == NULL)
|
|
return -ENOMEM;
|
|
|
|
init_completion(&sigma_delta->completion);
|
|
|
|
sigma_delta->irq_dis = true;
|
|
ret = devm_request_irq(dev, sigma_delta->spi->irq,
|
|
ad_sd_data_rdy_trig_poll,
|
|
sigma_delta->info->irq_flags | IRQF_NO_AUTOEN,
|
|
indio_dev->name,
|
|
sigma_delta);
|
|
if (ret)
|
|
return ret;
|
|
|
|
iio_trigger_set_drvdata(sigma_delta->trig, sigma_delta);
|
|
|
|
ret = devm_iio_trigger_register(dev, sigma_delta->trig);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* select default trigger */
|
|
indio_dev->trig = iio_trigger_get(sigma_delta->trig);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* devm_ad_sd_setup_buffer_and_trigger() - Device-managed buffer & trigger setup
|
|
* @dev: Device object to which to bind the life-time of the resources attached
|
|
* @indio_dev: The IIO device
|
|
*/
|
|
int devm_ad_sd_setup_buffer_and_trigger(struct device *dev, struct iio_dev *indio_dev)
|
|
{
|
|
struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
|
|
int ret;
|
|
|
|
sigma_delta->slots = devm_kcalloc(dev, sigma_delta->num_slots,
|
|
sizeof(*sigma_delta->slots), GFP_KERNEL);
|
|
if (!sigma_delta->slots)
|
|
return -ENOMEM;
|
|
|
|
ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
|
|
&iio_pollfunc_store_time,
|
|
&ad_sd_trigger_handler,
|
|
&ad_sd_buffer_setup_ops);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_ad_sd_probe_trigger(dev, indio_dev);
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(devm_ad_sd_setup_buffer_and_trigger, IIO_AD_SIGMA_DELTA);
|
|
|
|
/**
|
|
* ad_sd_init() - Initializes a ad_sigma_delta struct
|
|
* @sigma_delta: The ad_sigma_delta device
|
|
* @indio_dev: The IIO device which the Sigma Delta device is used for
|
|
* @spi: The SPI device for the ad_sigma_delta device
|
|
* @info: Device specific callbacks and options
|
|
*
|
|
* This function needs to be called before any other operations are performed on
|
|
* the ad_sigma_delta struct.
|
|
*/
|
|
int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev,
|
|
struct spi_device *spi, const struct ad_sigma_delta_info *info)
|
|
{
|
|
sigma_delta->spi = spi;
|
|
sigma_delta->info = info;
|
|
|
|
/* If the field is unset in ad_sigma_delta_info, asume there can only be 1 slot. */
|
|
if (!info->num_slots)
|
|
sigma_delta->num_slots = 1;
|
|
else
|
|
sigma_delta->num_slots = info->num_slots;
|
|
|
|
if (sigma_delta->num_slots > 1) {
|
|
if (!indio_dev->info->update_scan_mode) {
|
|
dev_err(&spi->dev, "iio_dev lacks update_scan_mode().\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!info->disable_all) {
|
|
dev_err(&spi->dev, "ad_sigma_delta_info lacks disable_all().\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
iio_device_set_drvdata(indio_dev, sigma_delta);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_NS_GPL(ad_sd_init, IIO_AD_SIGMA_DELTA);
|
|
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
MODULE_DESCRIPTION("Analog Devices Sigma-Delta ADCs");
|
|
MODULE_LICENSE("GPL v2");
|