linux/drivers/iio/common/hid-sensors
Greg Kroah-Hartman e28642c04a First set of IIO fixes for the 3.16 cycle.
A mixed bag of fixes, many of which feel just to late for 3.15.
 
 * hid sensors - some devices need a feature report request in order to
   change power state.  This isn't part of the spec, but has been observed
   on several devices and does no harm to others.
 * mpl3115 has had two errors in the buffer description fixed. The presure is
   signed, not unsigned and the temperature has 12 bits rather than 16.
   These could lead to incorrect interpretation of the data in userspace.
 * tsl2x7x - the high byte of the proximity thresholds should be written along
   with the low byte (which was). This could lead to interesting results
   with large thresholds.
 * twl4030 - a flag to specify processed values were required was not set
   when initializing a reading.  As such values returned were in an unknown
   state. Fixed by simply initializing it appropriately.
 * IIO_SIMPLE_DUMMY_BUFFER did not select IIO_BUFFER leading to randconfig
   build errors.
 * ak8975 was applying an unwanted le16_to_cpu conversion as the i2c framework
   already performs one.  As such for big endian systems, the bytes would be
   in the wrong order in the magnetic field measurements reported.
 * mxs-lradc - the controllable voltage dividers were not enabled / disabled for
   later channels than the first one during conversion.
 * at91_adc error handling returned -ENOMEM in a u8. Return value of
   at91_adc_get_trigger_value_by_name changed to int thus allowing -ENOMEM and
   also original values to be returned.
 * mcb - mcb_request_mem returns and ERR_PTR but the caller was checking for
   NULL to detect an error.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJTnLYyAAoJEFSFNJnE9BaI6r4QAK22hjl1J3xoWwOPUJhfJ5Hh
 VTjwO1OxwQ1XtUN5WneeJM73eu6moXD/avG2NbX4orAkNjSXKL6+/3WAds/rYMj2
 0vPiJsKsGBBlhu2w2RU80xVOPT2/XXIH3bYWDiUlr/i6DLEh8mU3kKX/yZzF+cIn
 hheYnOHZzLqGH8JircScEJv+B06svZtlfoDeLYaKY03HupTvEH95mvCSZk71PxZb
 A+7Qb3nDlZrpLBFKj4L5x15MIoEgopID2pX0kHLNY2DE1sopr2Z+FgSa3u/wtSEx
 k/ViyHPRk1mjTrQ92RMmTF5lMts6JFCmMgpPCNmcSyRKt6Fe6KcCMiWIlSs9I69i
 6KAIes5XpP7Qti5Yd4gi70uiq7fL1hR18Yhzv6IdmNdS8iJhk53YiWDYiYBgXwWS
 rcOva4NsaoeLYUdNJZRtap3RLsQRKAxg7HNhL+G88rr3wCsA0P7rb6BMdFK+3MiS
 BDcYe8mHIzX9tJZa4EU8kOdr+aphQeDt1nH4aZDWT3J7fo6RWrWcPMWFAcx+1jp3
 VVDL6Jn8WIuxYIDFznSQ6T6tvsvuqPgCqOA0ygfzvruo3m/oWvTT/+i2YFotGH3Y
 7Mlw7TACAmcuZStBLg6R0R1fD39zpfp4/+GNRxFaaB8otMPyrbizb0HBcaksQCp0
 0MTbFSjuAlXZ3NhVIm2O
 =RuB2
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-3.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 3.16 cycle.

A mixed bag of fixes, many of which feel just to late for 3.15.

* hid sensors - some devices need a feature report request in order to
  change power state.  This isn't part of the spec, but has been observed
  on several devices and does no harm to others.
* mpl3115 has had two errors in the buffer description fixed. The presure is
  signed, not unsigned and the temperature has 12 bits rather than 16.
  These could lead to incorrect interpretation of the data in userspace.
* tsl2x7x - the high byte of the proximity thresholds should be written along
  with the low byte (which was). This could lead to interesting results
  with large thresholds.
* twl4030 - a flag to specify processed values were required was not set
  when initializing a reading.  As such values returned were in an unknown
  state. Fixed by simply initializing it appropriately.
* IIO_SIMPLE_DUMMY_BUFFER did not select IIO_BUFFER leading to randconfig
  build errors.
* ak8975 was applying an unwanted le16_to_cpu conversion as the i2c framework
  already performs one.  As such for big endian systems, the bytes would be
  in the wrong order in the magnetic field measurements reported.
* mxs-lradc - the controllable voltage dividers were not enabled / disabled for
  later channels than the first one during conversion.
* at91_adc error handling returned -ENOMEM in a u8. Return value of
  at91_adc_get_trigger_value_by_name changed to int thus allowing -ENOMEM and
  also original values to be returned.
* mcb - mcb_request_mem returns and ERR_PTR but the caller was checking for
  NULL to detect an error.
2014-06-18 10:41:08 -07:00
..
hid-sensor-attributes.c iio: hid-sensors: Set default unit of measure for report interval 2014-05-10 11:45:02 +01:00
hid-sensor-trigger.c First set of IIO fixes for the 3.16 cycle. 2014-06-18 10:41:08 -07:00
hid-sensor-trigger.h iio: hid-sensors: Add API to power on/off 2014-05-05 10:59:49 +01:00
Kconfig iio: hid-sensors: Fix power and report state 2013-12-02 21:05:32 +00:00
Makefile iio: hid-sensors: respect CONFIG_IIO_TRIGGER 2012-12-27 10:59:50 +00:00