linux/tools/testing/selftests/Makefile
Dmitry Safonov 61c5767603 selftests/timens: Add Time Namespace test for supported clocks
A test to check that all supported clocks work on host and inside
a new time namespace. Use both ways to get time: through VDSO and
by entering the kernel with implicit syscall.

Introduce a new timens directory in selftests framework for
the next timens tests.

Output on success:
 1..10
 ok 1 Passed for CLOCK_BOOTTIME (syscall)
 ok 2 Passed for CLOCK_BOOTTIME (vdso)
 ok 3 Passed for CLOCK_BOOTTIME_ALARM (syscall)
 ok 4 Passed for CLOCK_BOOTTIME_ALARM (vdso)
 ok 5 Passed for CLOCK_MONOTONIC (syscall)
 ok 6 Passed for CLOCK_MONOTONIC (vdso)
 ok 7 Passed for CLOCK_MONOTONIC_COARSE (syscall)
 ok 8 Passed for CLOCK_MONOTONIC_COARSE (vdso)
 ok 9 Passed for CLOCK_MONOTONIC_RAW (syscall)
 ok 10 Passed for CLOCK_MONOTONIC_RAW (vdso)
 # Pass 10 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0

Output with lack of permissions:
 1..10
 not ok 1 # SKIP need to run as root

Output without support of time namespaces:
 1..10
 not ok 1 # SKIP Time namespaces are not supported

Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-29-dima@arista.com
2020-01-14 12:21:00 +01:00

243 lines
7.1 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
TARGETS = android
TARGETS += arm64
TARGETS += bpf
TARGETS += breakpoints
TARGETS += capabilities
TARGETS += cgroup
TARGETS += clone3
TARGETS += cpufreq
TARGETS += cpu-hotplug
TARGETS += drivers/dma-buf
TARGETS += efivarfs
TARGETS += exec
TARGETS += filesystems
TARGETS += filesystems/binderfs
TARGETS += filesystems/epoll
TARGETS += firmware
TARGETS += ftrace
TARGETS += futex
TARGETS += gpio
TARGETS += intel_pstate
TARGETS += ipc
TARGETS += ir
TARGETS += kcmp
TARGETS += kexec
TARGETS += kvm
TARGETS += lib
TARGETS += livepatch
TARGETS += membarrier
TARGETS += memfd
TARGETS += memory-hotplug
TARGETS += mount
TARGETS += mqueue
TARGETS += net
TARGETS += netfilter
TARGETS += networking/timestamping
TARGETS += nsfs
TARGETS += pidfd
TARGETS += powerpc
TARGETS += proc
TARGETS += pstore
TARGETS += ptrace
TARGETS += rseq
TARGETS += rtc
TARGETS += seccomp
TARGETS += sigaltstack
TARGETS += size
TARGETS += sparc64
TARGETS += splice
TARGETS += static_keys
TARGETS += sync
TARGETS += sysctl
TARGETS += timens
ifneq (1, $(quicktest))
TARGETS += timers
endif
TARGETS += tmpfs
TARGETS += tpm2
TARGETS += user
TARGETS += vm
TARGETS += x86
TARGETS += zram
#Please keep the TARGETS list alphabetically sorted
# Run "make quicktest=1 run_tests" or
# "make quicktest=1 kselftest" from top level Makefile
TARGETS_HOTPLUG = cpu-hotplug
TARGETS_HOTPLUG += memory-hotplug
# User can optionally provide a TARGETS skiplist.
SKIP_TARGETS ?=
ifneq ($(SKIP_TARGETS),)
TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS))
override TARGETS := $(TMP)
endif
# Clear LDFLAGS and MAKEFLAGS if called from main
# Makefile to avoid test build failures when test
# Makefile doesn't have explicit build rules.
ifeq (1,$(MAKELEVEL))
override LDFLAGS =
override MAKEFLAGS =
endif
# Append kselftest to KBUILD_OUTPUT to avoid cluttering
# KBUILD_OUTPUT with selftest objects and headers installed
# by selftests Makefile or lib.mk.
ifdef building_out_of_srctree
override LDFLAGS =
endif
ifneq ($(O),)
BUILD := $(O)
else
ifneq ($(KBUILD_OUTPUT),)
BUILD := $(KBUILD_OUTPUT)/kselftest
else
BUILD := $(shell pwd)
DEFAULT_INSTALL_HDR_PATH := 1
endif
endif
# Prepare for headers install
top_srcdir ?= ../../..
include $(top_srcdir)/scripts/subarch.include
ARCH ?= $(SUBARCH)
export KSFT_KHDR_INSTALL_DONE := 1
export BUILD
# build and run gpio when output directory is the src dir.
# gpio has dependency on tools/gpio and builds tools/gpio
# objects in the src directory in all cases making the src
# repo dirty even when objects are relocated.
ifneq (1,$(DEFAULT_INSTALL_HDR_PATH))
TMP := $(filter-out gpio, $(TARGETS))
TARGETS := $(TMP)
endif
# set default goal to all, so make without a target runs all, even when
# all isn't the first target in the file.
.DEFAULT_GOAL := all
# Install headers here once for all tests. KSFT_KHDR_INSTALL_DONE
# is used to avoid running headers_install from lib.mk.
# Invoke headers install with --no-builtin-rules to avoid circular
# dependency in "make kselftest" case. In this case, second level
# make inherits builtin-rules which will use the rule generate
# Makefile.o and runs into
# "Circular Makefile.o <- prepare dependency dropped."
# and headers_install fails and test compile fails.
#
# O= KBUILD_OUTPUT cases don't run into this error, since main Makefile
# invokes them as sub-makes and --no-builtin-rules is not necessary,
# but doesn't cause any failures. Keep it simple and use the same
# flags in both cases.
# Local build cases: "make kselftest", "make -C" - headers are installed
# in the default INSTALL_HDR_PATH usr/include.
khdr:
ifeq (1,$(DEFAULT_INSTALL_HDR_PATH))
$(MAKE) --no-builtin-rules ARCH=$(ARCH) -C $(top_srcdir) headers_install
else
$(MAKE) --no-builtin-rules INSTALL_HDR_PATH=$$BUILD/usr \
ARCH=$(ARCH) -C $(top_srcdir) headers_install
endif
all: khdr
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
mkdir $$BUILD_TARGET -p; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
done;
run_tests: all
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests;\
done;
hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET;\
done;
run_hotplug: hotplug
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_full_test;\
done;
clean_hotplug:
@for TARGET in $(TARGETS_HOTPLUG); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
done;
run_pstore_crash:
$(MAKE) -C pstore run_crash
# Use $BUILD as the default install root. $BUILD points to the
# right output location for the following cases:
# 1. output_dir=kernel_src
# 2. a separate output directory is specified using O= KBUILD_OUTPUT
# 3. a separate output directory is specified using KBUILD_OUTPUT
# Avoid conflict with INSTALL_PATH set by the main Makefile
#
KSFT_INSTALL_PATH ?= $(BUILD)/kselftest_install
KSFT_INSTALL_PATH := $(abspath $(KSFT_INSTALL_PATH))
# Avoid changing the rest of the logic here and lib.mk.
INSTALL_PATH := $(KSFT_INSTALL_PATH)
ALL_SCRIPT := $(INSTALL_PATH)/run_kselftest.sh
install: all
ifdef INSTALL_PATH
@# Ask all targets to install their files
mkdir -p $(INSTALL_PATH)/kselftest
install -m 744 kselftest/module.sh $(INSTALL_PATH)/kselftest/
install -m 744 kselftest/runner.sh $(INSTALL_PATH)/kselftest/
install -m 744 kselftest/prefix.pl $(INSTALL_PATH)/kselftest/
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
done;
@# Ask all targets to emit their test scripts
echo "#!/bin/sh" > $(ALL_SCRIPT)
echo "BASE_DIR=\$$(realpath \$$(dirname \$$0))" >> $(ALL_SCRIPT)
echo "cd \$$BASE_DIR" >> $(ALL_SCRIPT)
echo ". ./kselftest/runner.sh" >> $(ALL_SCRIPT)
echo "ROOT=\$$PWD" >> $(ALL_SCRIPT)
echo "if [ \"\$$1\" = \"--summary\" ]; then" >> $(ALL_SCRIPT)
echo " logfile=\$$BASE_DIR/output.log" >> $(ALL_SCRIPT)
echo " cat /dev/null > \$$logfile" >> $(ALL_SCRIPT)
echo "fi" >> $(ALL_SCRIPT)
@# While building run_kselftest.sh skip also non-existent TARGET dirs:
@# they could be the result of a build failure and should NOT be
@# included in the generated runlist.
for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
[ ! -d $(INSTALL_PATH)/$$TARGET ] && echo "Skipping non-existent dir: $$TARGET" && continue; \
echo "[ -w /dev/kmsg ] && echo \"kselftest: Running tests in $$TARGET\" >> /dev/kmsg" >> $(ALL_SCRIPT); \
echo "cd $$TARGET" >> $(ALL_SCRIPT); \
echo -n "run_many" >> $(ALL_SCRIPT); \
echo -n "Emit Tests for $$TARGET\n"; \
$(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
echo "" >> $(ALL_SCRIPT); \
echo "cd \$$ROOT" >> $(ALL_SCRIPT); \
done;
chmod u+x $(ALL_SCRIPT)
else
$(error Error: set INSTALL_PATH to use install)
endif
clean:
@for TARGET in $(TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET clean;\
done;
.PHONY: khdr all run_tests hotplug run_hotplug clean_hotplug run_pstore_crash install clean