Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-22 02:52:56 +00:00
Code Issues Packages Projects Releases Wiki Activity
e19918855d
linux/drivers/scsi/qla4xxx/ql4_isr.c
Vikas Chaudhary 4c6a794d2c [SCSI] qla4xxx: Perform context resets in case of context failures. 
For 4032, context reset was the same as chip reset, and any firmware
issue was recovered by performing a chip reset.
For 82xx, the iSCSI firmware runs along with FCoE and the NIC
firmware contexts, and an error encountered doesnot essentially mean
that a chip reset is necessary.

Perform Chip resets only in the following cases:
1. Mailbox system error.
2. Mailbox command timeout.
3. fw_heartbeat_counter counter stops incrementing.

For all other cases, only perform a context reset.
1. Command Completion with an invalid srb.
2. Other mailbox failures.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Shyam Sunder <shyam.sunder@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15 10:57:41 +04:00

1176 lines
31 KiB
C
Raw Blame History

/*
* QLogic iSCSI HBA Driver
* Copyright (c) 2003-2010 QLogic Corporation
*
* See LICENSE.qla4xxx for copyright and licensing details.
*/
#include "ql4_def.h"
#include "ql4_glbl.h"
#include "ql4_dbg.h"
#include "ql4_inline.h"
/**
* qla4xxx_copy_sense - copy sense data into cmd sense buffer
* @ha: Pointer to host adapter structure.
* @sts_entry: Pointer to status entry structure.
* @srb: Pointer to srb structure.
**/
static void qla4xxx_copy_sense(struct scsi_qla_host *ha,
struct status_entry *sts_entry,
struct srb *srb)
{
struct scsi_cmnd *cmd = srb->cmd;
uint16_t sense_len;
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
sense_len = le16_to_cpu(sts_entry->senseDataByteCnt);
if (sense_len == 0) {
DEBUG2(ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%d:%d: %s:"
" sense len 0\n", ha->host_no,
cmd->device->channel, cmd->device->id,
cmd->device->lun, __func__));
ha->status_srb = NULL;
return;
}
/* Save total available sense length,
* not to exceed cmd's sense buffer size */
sense_len = min_t(uint16_t, sense_len, SCSI_SENSE_BUFFERSIZE);
srb->req_sense_ptr = cmd->sense_buffer;
srb->req_sense_len = sense_len;
/* Copy sense from sts_entry pkt */
sense_len = min_t(uint16_t, sense_len, IOCB_MAX_SENSEDATA_LEN);
memcpy(cmd->sense_buffer, sts_entry->senseData, sense_len);
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: %s: sense key = %x, "
"ASL= %02x, ASC/ASCQ = %02x/%02x\n", ha->host_no,
cmd->device->channel, cmd->device->id,
cmd->device->lun, __func__,
sts_entry->senseData[2] & 0x0f,
sts_entry->senseData[7],
sts_entry->senseData[12],
sts_entry->senseData[13]));
DEBUG5(qla4xxx_dump_buffer(cmd->sense_buffer, sense_len));
srb->flags |= SRB_GOT_SENSE;
/* Update srb, in case a sts_cont pkt follows */
srb->req_sense_ptr += sense_len;
srb->req_sense_len -= sense_len;
if (srb->req_sense_len != 0)
ha->status_srb = srb;
else
ha->status_srb = NULL;
}
/**
* qla4xxx_status_cont_entry - Process a Status Continuations entry.
* @ha: SCSI driver HA context
* @sts_cont: Entry pointer
*
* Extended sense data.
*/
static void
qla4xxx_status_cont_entry(struct scsi_qla_host *ha,
struct status_cont_entry *sts_cont)
{
struct srb *srb = ha->status_srb;
struct scsi_cmnd *cmd;
uint16_t sense_len;
if (srb == NULL)
return;
cmd = srb->cmd;
if (cmd == NULL) {
DEBUG2(printk(KERN_INFO "scsi%ld: %s: Cmd already returned "
"back to OS srb=%p srb->state:%d\n", ha->host_no,
__func__, srb, srb->state));
ha->status_srb = NULL;
return;
}
/* Copy sense data. */
sense_len = min_t(uint16_t, srb->req_sense_len,
IOCB_MAX_EXT_SENSEDATA_LEN);
memcpy(srb->req_sense_ptr, sts_cont->ext_sense_data, sense_len);
DEBUG5(qla4xxx_dump_buffer(srb->req_sense_ptr, sense_len));
srb->req_sense_ptr += sense_len;
srb->req_sense_len -= sense_len;
/* Place command on done queue. */
if (srb->req_sense_len == 0) {
kref_put(&srb->srb_ref, qla4xxx_srb_compl);
ha->status_srb = NULL;
}
}
/**
* qla4xxx_status_entry - processes status IOCBs
* @ha: Pointer to host adapter structure.
* @sts_entry: Pointer to status entry structure.
**/
static void qla4xxx_status_entry(struct scsi_qla_host *ha,
struct status_entry *sts_entry)
{
uint8_t scsi_status;
struct scsi_cmnd *cmd;
struct srb *srb;
struct ddb_entry *ddb_entry;
uint32_t residual;
srb = qla4xxx_del_from_active_array(ha, le32_to_cpu(sts_entry->handle));
if (!srb) {
ql4_printk(KERN_WARNING, ha, "%s invalid status entry: "
"handle=0x%0x, srb=%p\n", __func__,
sts_entry->handle, srb);
if (is_qla8022(ha))
set_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags);
else
set_bit(DPC_RESET_HA, &ha->dpc_flags);
return;
}
cmd = srb->cmd;
if (cmd == NULL) {
DEBUG2(printk("scsi%ld: %s: Command already returned back to "
"OS pkt->handle=%d srb=%p srb->state:%d\n",
ha->host_no, __func__, sts_entry->handle,
srb, srb->state));
ql4_printk(KERN_WARNING, ha, "Command is NULL:"
" already returned to OS (srb=%p)\n", srb);
return;
}
ddb_entry = srb->ddb;
if (ddb_entry == NULL) {
cmd->result = DID_NO_CONNECT << 16;
goto status_entry_exit;
}
residual = le32_to_cpu(sts_entry->residualByteCnt);
/* Translate ISP error to a Linux SCSI error. */
scsi_status = sts_entry->scsiStatus;
switch (sts_entry->completionStatus) {
case SCS_COMPLETE:
if (sts_entry->iscsiFlags & ISCSI_FLAG_RESIDUAL_OVER) {
cmd->result = DID_ERROR << 16;
break;
}
if (sts_entry->iscsiFlags &ISCSI_FLAG_RESIDUAL_UNDER) {
scsi_set_resid(cmd, residual);
if (!scsi_status && ((scsi_bufflen(cmd) - residual) <
cmd->underflow)) {
cmd->result = DID_ERROR << 16;
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: "
"Mid-layer Data underrun0, "
"xferlen = 0x%x, "
"residual = 0x%x\n", ha->host_no,
cmd->device->channel,
cmd->device->id,
cmd->device->lun, __func__,
scsi_bufflen(cmd), residual));
break;
}
}
cmd->result = DID_OK << 16 | scsi_status;
if (scsi_status != SCSI_CHECK_CONDITION)
break;
/* Copy Sense Data into sense buffer. */
qla4xxx_copy_sense(ha, sts_entry, srb);
break;
case SCS_INCOMPLETE:
/* Always set the status to DID_ERROR, since
* all conditions result in that status anyway */
cmd->result = DID_ERROR << 16;
break;
case SCS_RESET_OCCURRED:
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: Device RESET occurred\n",
ha->host_no, cmd->device->channel,
cmd->device->id, cmd->device->lun, __func__));
cmd->result = DID_RESET << 16;
break;
case SCS_ABORTED:
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: Abort occurred\n",
ha->host_no, cmd->device->channel,
cmd->device->id, cmd->device->lun, __func__));
cmd->result = DID_RESET << 16;
break;
case SCS_TIMEOUT:
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: Timeout\n",
ha->host_no, cmd->device->channel,
cmd->device->id, cmd->device->lun));
cmd->result = DID_TRANSPORT_DISRUPTED << 16;
/*
* Mark device missing so that we won't continue to send
* I/O to this device. We should get a ddb state change
* AEN soon.
*/
if (iscsi_is_session_online(ddb_entry->sess))
qla4xxx_mark_device_missing(ddb_entry->sess);
break;
case SCS_DATA_UNDERRUN:
case SCS_DATA_OVERRUN:
if ((sts_entry->iscsiFlags & ISCSI_FLAG_RESIDUAL_OVER) ||
(sts_entry->completionStatus == SCS_DATA_OVERRUN)) {
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: " "Data overrun\n",
ha->host_no,
cmd->device->channel, cmd->device->id,
cmd->device->lun, __func__));
cmd->result = DID_ERROR << 16;
break;
}
scsi_set_resid(cmd, residual);
/*
* If there is scsi_status, it takes precedense over
* underflow condition.
*/
if (scsi_status != 0) {
cmd->result = DID_OK << 16 | scsi_status;
if (scsi_status != SCSI_CHECK_CONDITION)
break;
/* Copy Sense Data into sense buffer. */
qla4xxx_copy_sense(ha, sts_entry, srb);
} else {
/*
* If RISC reports underrun and target does not
* report it then we must have a lost frame, so
* tell upper layer to retry it by reporting a
* bus busy.
*/
if ((sts_entry->iscsiFlags &
ISCSI_FLAG_RESIDUAL_UNDER) == 0) {
cmd->result = DID_BUS_BUSY << 16;
} else if ((scsi_bufflen(cmd) - residual) <
cmd->underflow) {
/*
* Handle mid-layer underflow???
*
* For kernels less than 2.4, the driver must
* return an error if an underflow is detected.
* For kernels equal-to and above 2.4, the
* mid-layer will appearantly handle the
* underflow by detecting the residual count --
* unfortunately, we do not see where this is
* actually being done. In the interim, we
* will return DID_ERROR.
*/
DEBUG2(printk("scsi%ld:%d:%d:%d: %s: "
"Mid-layer Data underrun1, "
"xferlen = 0x%x, "
"residual = 0x%x\n", ha->host_no,
cmd->device->channel,
cmd->device->id,
cmd->device->lun, __func__,
scsi_bufflen(cmd), residual));
cmd->result = DID_ERROR << 16;
} else {
cmd->result = DID_OK << 16;
}
}
break;
case SCS_DEVICE_LOGGED_OUT:
case SCS_DEVICE_UNAVAILABLE:
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%d: SCS_DEVICE "
"state: 0x%x\n", ha->host_no,
cmd->device->channel, cmd->device->id,
cmd->device->lun, sts_entry->completionStatus));
/*
* Mark device missing so that we won't continue to
* send I/O to this device. We should get a ddb
* state change AEN soon.
*/
if (iscsi_is_session_online(ddb_entry->sess))
qla4xxx_mark_device_missing(ddb_entry->sess);
cmd->result = DID_TRANSPORT_DISRUPTED << 16;
break;
case SCS_QUEUE_FULL:
/*
* SCSI Mid-Layer handles device queue full
*/
cmd->result = DID_OK << 16 | sts_entry->scsiStatus;
DEBUG2(printk("scsi%ld:%d:%d: %s: QUEUE FULL detected "
"compl=%02x, scsi=%02x, state=%02x, iFlags=%02x,"
" iResp=%02x\n", ha->host_no, cmd->device->id,
cmd->device->lun, __func__,
sts_entry->completionStatus,
sts_entry->scsiStatus, sts_entry->state_flags,
sts_entry->iscsiFlags,
sts_entry->iscsiResponse));
break;
default:
cmd->result = DID_ERROR << 16;
break;
}
status_entry_exit:
/* complete the request, if not waiting for status_continuation pkt */
srb->cc_stat = sts_entry->completionStatus;
if (ha->status_srb == NULL)
kref_put(&srb->srb_ref, qla4xxx_srb_compl);
}
/**
* qla4xxx_passthru_status_entry - processes passthru status IOCBs (0x3C)
* @ha: Pointer to host adapter structure.
* @sts_entry: Pointer to status entry structure.
**/
static void qla4xxx_passthru_status_entry(struct scsi_qla_host *ha,
struct passthru_status *sts_entry)
{
struct iscsi_task *task;
struct ddb_entry *ddb_entry;
struct ql4_task_data *task_data;
struct iscsi_cls_conn *cls_conn;
struct iscsi_conn *conn;
itt_t itt;
uint32_t fw_ddb_index;
itt = sts_entry->handle;
fw_ddb_index = le32_to_cpu(sts_entry->target);
ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index);
if (ddb_entry == NULL) {
ql4_printk(KERN_ERR, ha, "%s: Invalid target index = 0x%x\n",
__func__, sts_entry->target);
return;
}
cls_conn = ddb_entry->conn;
conn = cls_conn->dd_data;
spin_lock(&conn->session->lock);
task = iscsi_itt_to_task(conn, itt);
spin_unlock(&conn->session->lock);
if (task == NULL) {
ql4_printk(KERN_ERR, ha, "%s: Task is NULL\n", __func__);
return;
}
task_data = task->dd_data;
memcpy(&task_data->sts, sts_entry, sizeof(struct passthru_status));
ha->req_q_count += task_data->iocb_req_cnt;
ha->iocb_cnt -= task_data->iocb_req_cnt;
queue_work(ha->task_wq, &task_data->task_work);
}
/**
* qla4xxx_process_response_queue - process response queue completions
* @ha: Pointer to host adapter structure.
*
* This routine process response queue completions in interrupt context.
* Hardware_lock locked upon entry
**/
void qla4xxx_process_response_queue(struct scsi_qla_host *ha)
{
uint32_t count = 0;
struct srb *srb = NULL;
struct status_entry *sts_entry;
/* Process all responses from response queue */
while ((ha->response_ptr->signature != RESPONSE_PROCESSED)) {
sts_entry = (struct status_entry *) ha->response_ptr;
count++;
/* Advance pointers for next entry */
if (ha->response_out == (RESPONSE_QUEUE_DEPTH - 1)) {
ha->response_out = 0;
ha->response_ptr = ha->response_ring;
} else {
ha->response_out++;
ha->response_ptr++;
}
/* process entry */
switch (sts_entry->hdr.entryType) {
case ET_STATUS:
/* Common status */
qla4xxx_status_entry(ha, sts_entry);
break;
case ET_PASSTHRU_STATUS:
if (sts_entry->hdr.systemDefined == SD_ISCSI_PDU)
qla4xxx_passthru_status_entry(ha,
(struct passthru_status *)sts_entry);
else
ql4_printk(KERN_ERR, ha,
"%s: Invalid status received\n",
__func__);
break;
case ET_STATUS_CONTINUATION:
qla4xxx_status_cont_entry(ha,
(struct status_cont_entry *) sts_entry);
break;
case ET_COMMAND:
/* ISP device queue is full. Command not
* accepted by ISP. Queue command for
* later */
srb = qla4xxx_del_from_active_array(ha,
le32_to_cpu(sts_entry->
handle));
if (srb == NULL)
goto exit_prq_invalid_handle;
DEBUG2(printk("scsi%ld: %s: FW device queue full, "
"srb %p\n", ha->host_no, __func__, srb));
/* ETRY normally by sending it back with
* DID_BUS_BUSY */
srb->cmd->result = DID_BUS_BUSY << 16;
kref_put(&srb->srb_ref, qla4xxx_srb_compl);
break;
case ET_CONTINUE:
/* Just throw away the continuation entries */
DEBUG2(printk("scsi%ld: %s: Continuation entry - "
"ignoring\n", ha->host_no, __func__));
break;
default:
/*
* Invalid entry in response queue, reset RISC
* firmware.
*/
DEBUG2(printk("scsi%ld: %s: Invalid entry %x in "
"response queue \n", ha->host_no,
__func__,
sts_entry->hdr.entryType));
goto exit_prq_error;
}
((struct response *)sts_entry)->signature = RESPONSE_PROCESSED;
wmb();
}
/*
* Tell ISP we're done with response(s). This also clears the interrupt.
*/
ha->isp_ops->complete_iocb(ha);
return;
exit_prq_invalid_handle:
DEBUG2(printk("scsi%ld: %s: Invalid handle(srb)=%p type=%x IOCS=%x\n",
ha->host_no, __func__, srb, sts_entry->hdr.entryType,
sts_entry->completionStatus));
exit_prq_error:
ha->isp_ops->complete_iocb(ha);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
/**
* qla4xxx_isr_decode_mailbox - decodes mailbox status
* @ha: Pointer to host adapter structure.
* @mailbox_status: Mailbox status.
*
* This routine decodes the mailbox status during the ISR.
* Hardware_lock locked upon entry. runs in interrupt context.
**/
static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
uint32_t mbox_status)
{
int i;
uint32_t mbox_sts[MBOX_AEN_REG_COUNT];
if ((mbox_status == MBOX_STS_BUSY) ||
(mbox_status == MBOX_STS_INTERMEDIATE_COMPLETION) ||
(mbox_status >> 12 == MBOX_COMPLETION_STATUS)) {
ha->mbox_status[0] = mbox_status;
if (test_bit(AF_MBOX_COMMAND, &ha->flags)) {
/*
* Copy all mailbox registers to a temporary
* location and set mailbox command done flag
*/
for (i = 0; i < ha->mbox_status_count; i++)
ha->mbox_status[i] = is_qla8022(ha)
? readl(&ha->qla4_8xxx_reg->mailbox_out[i])
: readl(&ha->reg->mailbox[i]);
set_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
if (test_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags))
complete(&ha->mbx_intr_comp);
}
} else if (mbox_status >> 12 == MBOX_ASYNC_EVENT_STATUS) {
for (i = 0; i < MBOX_AEN_REG_COUNT; i++)
mbox_sts[i] = is_qla8022(ha)
? readl(&ha->qla4_8xxx_reg->mailbox_out[i])
: readl(&ha->reg->mailbox[i]);
/* Immediately process the AENs that don't require much work.
* Only queue the database_changed AENs */
if (ha->aen_log.count < MAX_AEN_ENTRIES) {
for (i = 0; i < MBOX_AEN_REG_COUNT; i++)
ha->aen_log.entry[ha->aen_log.count].mbox_sts[i] =
mbox_sts[i];
ha->aen_log.count++;
}
switch (mbox_status) {
case MBOX_ASTS_SYSTEM_ERROR:
/* Log Mailbox registers */
ql4_printk(KERN_INFO, ha, "%s: System Err\n", __func__);
qla4xxx_dump_registers(ha);
if (ql4xdontresethba) {
DEBUG2(printk("scsi%ld: %s:Don't Reset HBA\n",
ha->host_no, __func__));
} else {
set_bit(AF_GET_CRASH_RECORD, &ha->flags);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
}
break;
case MBOX_ASTS_REQUEST_TRANSFER_ERROR:
case MBOX_ASTS_RESPONSE_TRANSFER_ERROR:
case MBOX_ASTS_NVRAM_INVALID:
case MBOX_ASTS_IP_ADDRESS_CHANGED:
case MBOX_ASTS_DHCP_LEASE_EXPIRED:
DEBUG2(printk("scsi%ld: AEN %04x, ERROR Status, "
"Reset HA\n", ha->host_no, mbox_status));
if (is_qla8022(ha))
set_bit(DPC_RESET_HA_FW_CONTEXT,
&ha->dpc_flags);
else
set_bit(DPC_RESET_HA, &ha->dpc_flags);
break;
case MBOX_ASTS_LINK_UP:
set_bit(AF_LINK_UP, &ha->flags);
if (test_bit(AF_INIT_DONE, &ha->flags))
set_bit(DPC_LINK_CHANGED, &ha->dpc_flags);
ql4_printk(KERN_INFO, ha, "%s: LINK UP\n", __func__);
break;
case MBOX_ASTS_LINK_DOWN:
clear_bit(AF_LINK_UP, &ha->flags);
if (test_bit(AF_INIT_DONE, &ha->flags))
set_bit(DPC_LINK_CHANGED, &ha->dpc_flags);
ql4_printk(KERN_INFO, ha, "%s: LINK DOWN\n", __func__);
break;
case MBOX_ASTS_HEARTBEAT:
ha->seconds_since_last_heartbeat = 0;
break;
case MBOX_ASTS_DHCP_LEASE_ACQUIRED:
DEBUG2(printk("scsi%ld: AEN %04x DHCP LEASE "
"ACQUIRED\n", ha->host_no, mbox_status));
set_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags);
break;
case MBOX_ASTS_PROTOCOL_STATISTIC_ALARM:
case MBOX_ASTS_SCSI_COMMAND_PDU_REJECTED: /* Target
* mode
* only */
case MBOX_ASTS_UNSOLICITED_PDU_RECEIVED: /* Connection mode */
case MBOX_ASTS_IPSEC_SYSTEM_FATAL_ERROR:
case MBOX_ASTS_SUBNET_STATE_CHANGE:
case MBOX_ASTS_DUPLICATE_IP:
/* No action */
DEBUG2(printk("scsi%ld: AEN %04x\n", ha->host_no,
mbox_status));
break;
case MBOX_ASTS_IP_ADDR_STATE_CHANGED:
printk("scsi%ld: AEN %04x, mbox_sts[2]=%04x, "
"mbox_sts[3]=%04x\n", ha->host_no, mbox_sts[0],
mbox_sts[2], mbox_sts[3]);
/* mbox_sts[2] = Old ACB state
* mbox_sts[3] = new ACB state */
if ((mbox_sts[3] == ACB_STATE_VALID) &&
((mbox_sts[2] == ACB_STATE_TENTATIVE) ||
(mbox_sts[2] == ACB_STATE_ACQUIRING)))
set_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags);
else if ((mbox_sts[3] == ACB_STATE_ACQUIRING) &&
(mbox_sts[2] == ACB_STATE_VALID)) {
if (is_qla8022(ha))
set_bit(DPC_RESET_HA_FW_CONTEXT,
&ha->dpc_flags);
else
set_bit(DPC_RESET_HA, &ha->dpc_flags);
} else if ((mbox_sts[3] == ACB_STATE_UNCONFIGURED))
complete(&ha->disable_acb_comp);
break;
case MBOX_ASTS_MAC_ADDRESS_CHANGED:
case MBOX_ASTS_DNS:
/* No action */
DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x, "
"mbox_sts[1]=%04x, mbox_sts[2]=%04x\n",
ha->host_no, mbox_sts[0],
mbox_sts[1], mbox_sts[2]));
break;
case MBOX_ASTS_SELF_TEST_FAILED:
case MBOX_ASTS_LOGIN_FAILED:
/* No action */
DEBUG2(printk("scsi%ld: AEN %04x, mbox_sts[1]=%04x, "
"mbox_sts[2]=%04x, mbox_sts[3]=%04x\n",
ha->host_no, mbox_sts[0], mbox_sts[1],
mbox_sts[2], mbox_sts[3]));
break;
case MBOX_ASTS_DATABASE_CHANGED:
/* Queue AEN information and process it in the DPC
* routine */
if (ha->aen_q_count > 0) {
/* decrement available counter */
ha->aen_q_count--;
for (i = 0; i < MBOX_AEN_REG_COUNT; i++)
ha->aen_q[ha->aen_in].mbox_sts[i] =
mbox_sts[i];
/* print debug message */
DEBUG2(printk("scsi%ld: AEN[%d] %04x queued "
"mb1:0x%x mb2:0x%x mb3:0x%x "
"mb4:0x%x mb5:0x%x\n",
ha->host_no, ha->aen_in,
mbox_sts[0], mbox_sts[1],
mbox_sts[2], mbox_sts[3],
mbox_sts[4], mbox_sts[5]));
/* advance pointer */
ha->aen_in++;
if (ha->aen_in == MAX_AEN_ENTRIES)
ha->aen_in = 0;
/* The DPC routine will process the aen */
set_bit(DPC_AEN, &ha->dpc_flags);
} else {
DEBUG2(printk("scsi%ld: %s: aen %04x, queue "
"overflowed! AEN LOST!!\n",
ha->host_no, __func__,
mbox_sts[0]));
DEBUG2(printk("scsi%ld: DUMP AEN QUEUE\n",
ha->host_no));
for (i = 0; i < MAX_AEN_ENTRIES; i++) {
DEBUG2(printk("AEN[%d] %04x %04x %04x "
"%04x\n", i, mbox_sts[0],
mbox_sts[1], mbox_sts[2],
mbox_sts[3]));
}
}
break;
case MBOX_ASTS_TXSCVR_INSERTED:
DEBUG2(printk(KERN_WARNING
"scsi%ld: AEN %04x Transceiver"
" inserted\n", ha->host_no, mbox_sts[0]));
break;
case MBOX_ASTS_TXSCVR_REMOVED:
DEBUG2(printk(KERN_WARNING
"scsi%ld: AEN %04x Transceiver"
" removed\n", ha->host_no, mbox_sts[0]));
break;
default:
DEBUG2(printk(KERN_WARNING
"scsi%ld: AEN %04x UNKNOWN\n",
ha->host_no, mbox_sts[0]));
break;
}
} else {
DEBUG2(printk("scsi%ld: Unknown mailbox status %08X\n",
ha->host_no, mbox_status));
ha->mbox_status[0] = mbox_status;
}
}
/**
* qla4_8xxx_interrupt_service_routine - isr
* @ha: pointer to host adapter structure.
*
* This is the main interrupt service routine.
* hardware_lock locked upon entry. runs in interrupt context.
**/
void qla4_8xxx_interrupt_service_routine(struct scsi_qla_host *ha,
uint32_t intr_status)
{
/* Process response queue interrupt. */
if (intr_status & HSRX_RISC_IOCB_INT)
qla4xxx_process_response_queue(ha);
/* Process mailbox/asynch event interrupt.*/
if (intr_status & HSRX_RISC_MB_INT)
qla4xxx_isr_decode_mailbox(ha,
readl(&ha->qla4_8xxx_reg->mailbox_out[0]));
/* clear the interrupt */
writel(0, &ha->qla4_8xxx_reg->host_int);
readl(&ha->qla4_8xxx_reg->host_int);
}
/**
* qla4xxx_interrupt_service_routine - isr
* @ha: pointer to host adapter structure.
*
* This is the main interrupt service routine.
* hardware_lock locked upon entry. runs in interrupt context.
**/
void qla4xxx_interrupt_service_routine(struct scsi_qla_host * ha,
uint32_t intr_status)
{
/* Process response queue interrupt. */
if (intr_status & CSR_SCSI_COMPLETION_INTR)
qla4xxx_process_response_queue(ha);
/* Process mailbox/asynch event interrupt.*/
if (intr_status & CSR_SCSI_PROCESSOR_INTR) {
qla4xxx_isr_decode_mailbox(ha,
readl(&ha->reg->mailbox[0]));
/* Clear Mailbox Interrupt */
writel(set_rmask(CSR_SCSI_PROCESSOR_INTR),
&ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
}
}
/**
* qla4_8xxx_spurious_interrupt - processes spurious interrupt
* @ha: pointer to host adapter structure.
* @reqs_count: .
*
**/
static void qla4_8xxx_spurious_interrupt(struct scsi_qla_host *ha,
uint8_t reqs_count)
{
if (reqs_count)
return;
DEBUG2(ql4_printk(KERN_INFO, ha, "Spurious Interrupt\n"));
if (is_qla8022(ha)) {
writel(0, &ha->qla4_8xxx_reg->host_int);
if (test_bit(AF_INTx_ENABLED, &ha->flags))
qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg,
0xfbff);
}
ha->spurious_int_count++;
}
/**
* qla4xxx_intr_handler - hardware interrupt handler.
* @irq: Unused
* @dev_id: Pointer to host adapter structure
**/
irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id)
{
struct scsi_qla_host *ha;
uint32_t intr_status;
unsigned long flags = 0;
uint8_t reqs_count = 0;
ha = (struct scsi_qla_host *) dev_id;
if (!ha) {
DEBUG2(printk(KERN_INFO
"qla4xxx: Interrupt with NULL host ptr\n"));
return IRQ_NONE;
}
spin_lock_irqsave(&ha->hardware_lock, flags);
ha->isr_count++;
/*
* Repeatedly service interrupts up to a maximum of
* MAX_REQS_SERVICED_PER_INTR
*/
while (1) {
/*
* Read interrupt status
*/
if (ha->isp_ops->rd_shdw_rsp_q_in(ha) !=
ha->response_out)
intr_status = CSR_SCSI_COMPLETION_INTR;
else
intr_status = readl(&ha->reg->ctrl_status);
if ((intr_status &
(CSR_SCSI_RESET_INTR|CSR_FATAL_ERROR|INTR_PENDING)) == 0) {
if (reqs_count == 0)
ha->spurious_int_count++;
break;
}
if (intr_status & CSR_FATAL_ERROR) {
DEBUG2(printk(KERN_INFO "scsi%ld: Fatal Error, "
"Status 0x%04x\n", ha->host_no,
readl(isp_port_error_status (ha))));
/* Issue Soft Reset to clear this error condition.
* This will prevent the RISC from repeatedly
* interrupting the driver; thus, allowing the DPC to
* get scheduled to continue error recovery.
* NOTE: Disabling RISC interrupts does not work in
* this case, as CSR_FATAL_ERROR overrides
* CSR_SCSI_INTR_ENABLE */
if ((readl(&ha->reg->ctrl_status) &
CSR_SCSI_RESET_INTR) == 0) {
writel(set_rmask(CSR_SOFT_RESET),
&ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
}
writel(set_rmask(CSR_FATAL_ERROR),
&ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
__qla4xxx_disable_intrs(ha);
set_bit(DPC_RESET_HA, &ha->dpc_flags);
break;
} else if (intr_status & CSR_SCSI_RESET_INTR) {
clear_bit(AF_ONLINE, &ha->flags);
__qla4xxx_disable_intrs(ha);
writel(set_rmask(CSR_SCSI_RESET_INTR),
&ha->reg->ctrl_status);
readl(&ha->reg->ctrl_status);
if (!test_bit(AF_HA_REMOVAL, &ha->flags))
set_bit(DPC_RESET_HA_INTR, &ha->dpc_flags);
break;
} else if (intr_status & INTR_PENDING) {
ha->isp_ops->interrupt_service_routine(ha, intr_status);
ha->total_io_count++;
if (++reqs_count == MAX_REQS_SERVICED_PER_INTR)
break;
}
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return IRQ_HANDLED;
}
/**
* qla4_8xxx_intr_handler - hardware interrupt handler.
* @irq: Unused
* @dev_id: Pointer to host adapter structure
**/
irqreturn_t qla4_8xxx_intr_handler(int irq, void *dev_id)
{
struct scsi_qla_host *ha = dev_id;
uint32_t intr_status;
uint32_t status;
unsigned long flags = 0;
uint8_t reqs_count = 0;
if (unlikely(pci_channel_offline(ha->pdev)))
return IRQ_HANDLED;
ha->isr_count++;
status = qla4_8xxx_rd_32(ha, ISR_INT_VECTOR);
if (!(status & ha->nx_legacy_intr.int_vec_bit))
return IRQ_NONE;
status = qla4_8xxx_rd_32(ha, ISR_INT_STATE_REG);
if (!ISR_IS_LEGACY_INTR_TRIGGERED(status)) {
DEBUG2(ql4_printk(KERN_INFO, ha,
"%s legacy Int not triggered\n", __func__));
return IRQ_NONE;
}
/* clear the interrupt */
qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_status_reg, 0xffffffff);
/* read twice to ensure write is flushed */
qla4_8xxx_rd_32(ha, ISR_INT_VECTOR);
qla4_8xxx_rd_32(ha, ISR_INT_VECTOR);
spin_lock_irqsave(&ha->hardware_lock, flags);
while (1) {
if (!(readl(&ha->qla4_8xxx_reg->host_int) &
ISRX_82XX_RISC_INT)) {
qla4_8xxx_spurious_interrupt(ha, reqs_count);
break;
}
intr_status = readl(&ha->qla4_8xxx_reg->host_status);
if ((intr_status &
(HSRX_RISC_MB_INT | HSRX_RISC_IOCB_INT)) == 0) {
qla4_8xxx_spurious_interrupt(ha, reqs_count);
break;
}
ha->isp_ops->interrupt_service_routine(ha, intr_status);
/* Enable Interrupt */
qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff);
if (++reqs_count == MAX_REQS_SERVICED_PER_INTR)
break;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return IRQ_HANDLED;
}
irqreturn_t
qla4_8xxx_msi_handler(int irq, void *dev_id)
{
struct scsi_qla_host *ha;
ha = (struct scsi_qla_host *) dev_id;
if (!ha) {
DEBUG2(printk(KERN_INFO
"qla4xxx: MSIX: Interrupt with NULL host ptr\n"));
return IRQ_NONE;
}
ha->isr_count++;
/* clear the interrupt */
qla4_8xxx_wr_32(ha, ha->nx_legacy_intr.tgt_status_reg, 0xffffffff);
/* read twice to ensure write is flushed */
qla4_8xxx_rd_32(ha, ISR_INT_VECTOR);
qla4_8xxx_rd_32(ha, ISR_INT_VECTOR);
return qla4_8xxx_default_intr_handler(irq, dev_id);
}
/**
* qla4_8xxx_default_intr_handler - hardware interrupt handler.
* @irq: Unused
* @dev_id: Pointer to host adapter structure
*
* This interrupt handler is called directly for MSI-X, and
* called indirectly for MSI.
**/
irqreturn_t
qla4_8xxx_default_intr_handler(int irq, void *dev_id)
{
struct scsi_qla_host *ha = dev_id;
unsigned long flags;
uint32_t intr_status;
uint8_t reqs_count = 0;
spin_lock_irqsave(&ha->hardware_lock, flags);
while (1) {
if (!(readl(&ha->qla4_8xxx_reg->host_int) &
ISRX_82XX_RISC_INT)) {
qla4_8xxx_spurious_interrupt(ha, reqs_count);
break;
}
intr_status = readl(&ha->qla4_8xxx_reg->host_status);
if ((intr_status &
(HSRX_RISC_MB_INT | HSRX_RISC_IOCB_INT)) == 0) {
qla4_8xxx_spurious_interrupt(ha, reqs_count);
break;
}
ha->isp_ops->interrupt_service_routine(ha, intr_status);
if (++reqs_count == MAX_REQS_SERVICED_PER_INTR)
break;
}
ha->isr_count++;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return IRQ_HANDLED;
}
irqreturn_t
qla4_8xxx_msix_rsp_q(int irq, void *dev_id)
{
struct scsi_qla_host *ha = dev_id;
unsigned long flags;
spin_lock_irqsave(&ha->hardware_lock, flags);
qla4xxx_process_response_queue(ha);
writel(0, &ha->qla4_8xxx_reg->host_int);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
ha->isr_count++;
return IRQ_HANDLED;
}
/**
* qla4xxx_process_aen - processes AENs generated by firmware
* @ha: pointer to host adapter structure.
* @process_aen: type of AENs to process
*
* Processes specific types of Asynchronous Events generated by firmware.
* The type of AENs to process is specified by process_aen and can be
* PROCESS_ALL_AENS 0
* FLUSH_DDB_CHANGED_AENS 1
* RELOGIN_DDB_CHANGED_AENS 2
**/
void qla4xxx_process_aen(struct scsi_qla_host * ha, uint8_t process_aen)
{
uint32_t mbox_sts[MBOX_AEN_REG_COUNT];
struct aen *aen;
int i;
unsigned long flags;
spin_lock_irqsave(&ha->hardware_lock, flags);
while (ha->aen_out != ha->aen_in) {
aen = &ha->aen_q[ha->aen_out];
/* copy aen information to local structure */
for (i = 0; i < MBOX_AEN_REG_COUNT; i++)
mbox_sts[i] = aen->mbox_sts[i];
ha->aen_q_count++;
ha->aen_out++;
if (ha->aen_out == MAX_AEN_ENTRIES)
ha->aen_out = 0;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
DEBUG2(printk("qla4xxx(%ld): AEN[%d]=0x%08x, mbx1=0x%08x mbx2=0x%08x"
" mbx3=0x%08x mbx4=0x%08x\n", ha->host_no,
(ha->aen_out ? (ha->aen_out-1): (MAX_AEN_ENTRIES-1)),
mbox_sts[0], mbox_sts[1], mbox_sts[2],
mbox_sts[3], mbox_sts[4]));
switch (mbox_sts[0]) {
case MBOX_ASTS_DATABASE_CHANGED:
switch (process_aen) {
case FLUSH_DDB_CHANGED_AENS:
DEBUG2(printk("scsi%ld: AEN[%d] %04x, index "
"[%d] state=%04x FLUSHED!\n",
ha->host_no, ha->aen_out,
mbox_sts[0], mbox_sts[2],
mbox_sts[3]));
break;
case PROCESS_ALL_AENS:
default:
/* Specific device. */
if (mbox_sts[1] == 1)
qla4xxx_process_ddb_changed(ha,
mbox_sts[2], mbox_sts[3],
mbox_sts[4]);
break;
}
}
spin_lock_irqsave(&ha->hardware_lock, flags);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
int qla4xxx_request_irqs(struct scsi_qla_host *ha)
{
int ret;
if (!is_qla8022(ha))
goto try_intx;
if (ql4xenablemsix == 2)
goto try_msi;
if (ql4xenablemsix == 0 || ql4xenablemsix != 1)
goto try_intx;
/* Trying MSI-X */
ret = qla4_8xxx_enable_msix(ha);
if (!ret) {
DEBUG2(ql4_printk(KERN_INFO, ha,
"MSI-X: Enabled (0x%X).\n", ha->revision_id));
goto irq_attached;
}
ql4_printk(KERN_WARNING, ha,
"MSI-X: Falling back-to MSI mode -- %d.\n", ret);
try_msi:
/* Trying MSI */
ret = pci_enable_msi(ha->pdev);
if (!ret) {
ret = request_irq(ha->pdev->irq, qla4_8xxx_msi_handler,
0, DRIVER_NAME, ha);
if (!ret) {
DEBUG2(ql4_printk(KERN_INFO, ha, "MSI: Enabled.\n"));
set_bit(AF_MSI_ENABLED, &ha->flags);
goto irq_attached;
} else {
ql4_printk(KERN_WARNING, ha,
"MSI: Failed to reserve interrupt %d "
"already in use.\n", ha->pdev->irq);
pci_disable_msi(ha->pdev);
}
}
ql4_printk(KERN_WARNING, ha,
"MSI: Falling back-to INTx mode -- %d.\n", ret);
try_intx:
/* Trying INTx */
ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
IRQF_SHARED, DRIVER_NAME, ha);
if (!ret) {
DEBUG2(ql4_printk(KERN_INFO, ha, "INTx: Enabled.\n"));
set_bit(AF_INTx_ENABLED, &ha->flags);
goto irq_attached;
} else {
ql4_printk(KERN_WARNING, ha,
"INTx: Failed to reserve interrupt %d already in"
" use.\n", ha->pdev->irq);
return ret;
}
irq_attached:
set_bit(AF_IRQ_ATTACHED, &ha->flags);
ha->host->irq = ha->pdev->irq;
ql4_printk(KERN_INFO, ha, "%s: irq %d attached\n",
__func__, ha->pdev->irq);
return ret;
}
void qla4xxx_free_irqs(struct scsi_qla_host *ha)
{
if (test_bit(AF_MSIX_ENABLED, &ha->flags))
qla4_8xxx_disable_msix(ha);
else if (test_and_clear_bit(AF_MSI_ENABLED, &ha->flags)) {
free_irq(ha->pdev->irq, ha);
pci_disable_msi(ha->pdev);
} else if (test_and_clear_bit(AF_INTx_ENABLED, &ha->flags))
free_irq(ha->pdev->irq, ha);
}
Reference in New Issue View Git Blame Copy Permalink