mirror of
https://github.com/torvalds/linux.git
synced 2024-12-22 19:01:37 +00:00
e0e8398c7a
Only the oldest devices lack some of the features supported by this driver. List them explicitly, and default to all features enabled for all other chips, including the ones added through sysfs. This will make future driver maintenance easier. In the unlikely event of a not yet supported device not implementing all the features, one can always use the disable_features module parameter to prevent the driver from attempting to use them. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Seth Heasley <seth.heasley@intel.com>
882 lines
24 KiB
C
882 lines
24 KiB
C
/*
|
|
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
|
|
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
|
|
<mdsxyz123@yahoo.com>
|
|
Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/*
|
|
Supports the following Intel I/O Controller Hubs (ICH):
|
|
|
|
I/O Block I2C
|
|
region SMBus Block proc. block
|
|
Chip name PCI ID size PEC buffer call read
|
|
----------------------------------------------------------------------
|
|
82801AA (ICH) 0x2413 16 no no no no
|
|
82801AB (ICH0) 0x2423 16 no no no no
|
|
82801BA (ICH2) 0x2443 16 no no no no
|
|
82801CA (ICH3) 0x2483 32 soft no no no
|
|
82801DB (ICH4) 0x24c3 32 hard yes no no
|
|
82801E (ICH5) 0x24d3 32 hard yes yes yes
|
|
6300ESB 0x25a4 32 hard yes yes yes
|
|
82801F (ICH6) 0x266a 32 hard yes yes yes
|
|
6310ESB/6320ESB 0x269b 32 hard yes yes yes
|
|
82801G (ICH7) 0x27da 32 hard yes yes yes
|
|
82801H (ICH8) 0x283e 32 hard yes yes yes
|
|
82801I (ICH9) 0x2930 32 hard yes yes yes
|
|
Tolapai 0x5032 32 hard yes yes yes
|
|
ICH10 0x3a30 32 hard yes yes yes
|
|
ICH10 0x3a60 32 hard yes yes yes
|
|
3400/5 Series (PCH) 0x3b30 32 hard yes yes yes
|
|
Cougar Point (PCH) 0x1c22 32 hard yes yes yes
|
|
|
|
Features supported by this driver:
|
|
Software PEC no
|
|
Hardware PEC yes
|
|
Block buffer yes
|
|
Block process call transaction no
|
|
I2C block read transaction yes (doesn't use the block buffer)
|
|
|
|
See the file Documentation/i2c/busses/i2c-i801 for details.
|
|
*/
|
|
|
|
/* Note: we assume there can only be one I801, with one SMBus interface */
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dmi.h>
|
|
|
|
/* I801 SMBus address offsets */
|
|
#define SMBHSTSTS (0 + i801_smba)
|
|
#define SMBHSTCNT (2 + i801_smba)
|
|
#define SMBHSTCMD (3 + i801_smba)
|
|
#define SMBHSTADD (4 + i801_smba)
|
|
#define SMBHSTDAT0 (5 + i801_smba)
|
|
#define SMBHSTDAT1 (6 + i801_smba)
|
|
#define SMBBLKDAT (7 + i801_smba)
|
|
#define SMBPEC (8 + i801_smba) /* ICH3 and later */
|
|
#define SMBAUXSTS (12 + i801_smba) /* ICH4 and later */
|
|
#define SMBAUXCTL (13 + i801_smba) /* ICH4 and later */
|
|
|
|
/* PCI Address Constants */
|
|
#define SMBBAR 4
|
|
#define SMBHSTCFG 0x040
|
|
|
|
/* Host configuration bits for SMBHSTCFG */
|
|
#define SMBHSTCFG_HST_EN 1
|
|
#define SMBHSTCFG_SMB_SMI_EN 2
|
|
#define SMBHSTCFG_I2C_EN 4
|
|
|
|
/* Auxillary control register bits, ICH4+ only */
|
|
#define SMBAUXCTL_CRC 1
|
|
#define SMBAUXCTL_E32B 2
|
|
|
|
/* kill bit for SMBHSTCNT */
|
|
#define SMBHSTCNT_KILL 2
|
|
|
|
/* Other settings */
|
|
#define MAX_TIMEOUT 100
|
|
#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
|
|
|
|
/* I801 command constants */
|
|
#define I801_QUICK 0x00
|
|
#define I801_BYTE 0x04
|
|
#define I801_BYTE_DATA 0x08
|
|
#define I801_WORD_DATA 0x0C
|
|
#define I801_PROC_CALL 0x10 /* unimplemented */
|
|
#define I801_BLOCK_DATA 0x14
|
|
#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
|
|
#define I801_BLOCK_LAST 0x34
|
|
#define I801_I2C_BLOCK_LAST 0x38 /* ICH5 and later */
|
|
#define I801_START 0x40
|
|
#define I801_PEC_EN 0x80 /* ICH3 and later */
|
|
|
|
/* I801 Hosts Status register bits */
|
|
#define SMBHSTSTS_BYTE_DONE 0x80
|
|
#define SMBHSTSTS_INUSE_STS 0x40
|
|
#define SMBHSTSTS_SMBALERT_STS 0x20
|
|
#define SMBHSTSTS_FAILED 0x10
|
|
#define SMBHSTSTS_BUS_ERR 0x08
|
|
#define SMBHSTSTS_DEV_ERR 0x04
|
|
#define SMBHSTSTS_INTR 0x02
|
|
#define SMBHSTSTS_HOST_BUSY 0x01
|
|
|
|
#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
|
|
SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
|
|
SMBHSTSTS_INTR)
|
|
|
|
static unsigned long i801_smba;
|
|
static unsigned char i801_original_hstcfg;
|
|
static struct pci_driver i801_driver;
|
|
static struct pci_dev *I801_dev;
|
|
|
|
#define FEATURE_SMBUS_PEC (1 << 0)
|
|
#define FEATURE_BLOCK_BUFFER (1 << 1)
|
|
#define FEATURE_BLOCK_PROC (1 << 2)
|
|
#define FEATURE_I2C_BLOCK_READ (1 << 3)
|
|
static unsigned int i801_features;
|
|
|
|
static const char *i801_feature_names[] = {
|
|
"SMBus PEC",
|
|
"Block buffer",
|
|
"Block process call",
|
|
"I2C block read",
|
|
};
|
|
|
|
static unsigned int disable_features;
|
|
module_param(disable_features, uint, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(disable_features, "Disable selected driver features");
|
|
|
|
/* Make sure the SMBus host is ready to start transmitting.
|
|
Return 0 if it is, -EBUSY if it is not. */
|
|
static int i801_check_pre(void)
|
|
{
|
|
int status;
|
|
|
|
status = inb_p(SMBHSTSTS);
|
|
if (status & SMBHSTSTS_HOST_BUSY) {
|
|
dev_err(&I801_dev->dev, "SMBus is busy, can't use it!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
status &= STATUS_FLAGS;
|
|
if (status) {
|
|
dev_dbg(&I801_dev->dev, "Clearing status flags (%02x)\n",
|
|
status);
|
|
outb_p(status, SMBHSTSTS);
|
|
status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
|
|
if (status) {
|
|
dev_err(&I801_dev->dev,
|
|
"Failed clearing status flags (%02x)\n",
|
|
status);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Convert the status register to an error code, and clear it. */
|
|
static int i801_check_post(int status, int timeout)
|
|
{
|
|
int result = 0;
|
|
|
|
/* If the SMBus is still busy, we give up */
|
|
if (timeout) {
|
|
dev_err(&I801_dev->dev, "Transaction timeout\n");
|
|
/* try to stop the current command */
|
|
dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
|
|
outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
|
|
msleep(1);
|
|
outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
|
|
|
|
/* Check if it worked */
|
|
status = inb_p(SMBHSTSTS);
|
|
if ((status & SMBHSTSTS_HOST_BUSY) ||
|
|
!(status & SMBHSTSTS_FAILED))
|
|
dev_err(&I801_dev->dev,
|
|
"Failed terminating the transaction\n");
|
|
outb_p(STATUS_FLAGS, SMBHSTSTS);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (status & SMBHSTSTS_FAILED) {
|
|
result = -EIO;
|
|
dev_err(&I801_dev->dev, "Transaction failed\n");
|
|
}
|
|
if (status & SMBHSTSTS_DEV_ERR) {
|
|
result = -ENXIO;
|
|
dev_dbg(&I801_dev->dev, "No response\n");
|
|
}
|
|
if (status & SMBHSTSTS_BUS_ERR) {
|
|
result = -EAGAIN;
|
|
dev_dbg(&I801_dev->dev, "Lost arbitration\n");
|
|
}
|
|
|
|
if (result) {
|
|
/* Clear error flags */
|
|
outb_p(status & STATUS_FLAGS, SMBHSTSTS);
|
|
status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
|
|
if (status) {
|
|
dev_warn(&I801_dev->dev, "Failed clearing status "
|
|
"flags at end of transaction (%02x)\n",
|
|
status);
|
|
}
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int i801_transaction(int xact)
|
|
{
|
|
int status;
|
|
int result;
|
|
int timeout = 0;
|
|
|
|
result = i801_check_pre();
|
|
if (result < 0)
|
|
return result;
|
|
|
|
/* the current contents of SMBHSTCNT can be overwritten, since PEC,
|
|
* INTREN, SMBSCMD are passed in xact */
|
|
outb_p(xact | I801_START, SMBHSTCNT);
|
|
|
|
/* We will always wait for a fraction of a second! */
|
|
do {
|
|
msleep(1);
|
|
status = inb_p(SMBHSTSTS);
|
|
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
|
|
|
|
result = i801_check_post(status, timeout > MAX_TIMEOUT);
|
|
if (result < 0)
|
|
return result;
|
|
|
|
outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
|
|
return 0;
|
|
}
|
|
|
|
/* wait for INTR bit as advised by Intel */
|
|
static void i801_wait_hwpec(void)
|
|
{
|
|
int timeout = 0;
|
|
int status;
|
|
|
|
do {
|
|
msleep(1);
|
|
status = inb_p(SMBHSTSTS);
|
|
} while ((!(status & SMBHSTSTS_INTR))
|
|
&& (timeout++ < MAX_TIMEOUT));
|
|
|
|
if (timeout > MAX_TIMEOUT)
|
|
dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
|
|
|
|
outb_p(status, SMBHSTSTS);
|
|
}
|
|
|
|
static int i801_block_transaction_by_block(union i2c_smbus_data *data,
|
|
char read_write, int hwpec)
|
|
{
|
|
int i, len;
|
|
int status;
|
|
|
|
inb_p(SMBHSTCNT); /* reset the data buffer index */
|
|
|
|
/* Use 32-byte buffer to process this transaction */
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
len = data->block[0];
|
|
outb_p(len, SMBHSTDAT0);
|
|
for (i = 0; i < len; i++)
|
|
outb_p(data->block[i+1], SMBBLKDAT);
|
|
}
|
|
|
|
status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
|
|
I801_PEC_EN * hwpec);
|
|
if (status)
|
|
return status;
|
|
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
len = inb_p(SMBHSTDAT0);
|
|
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
|
|
return -EPROTO;
|
|
|
|
data->block[0] = len;
|
|
for (i = 0; i < len; i++)
|
|
data->block[i + 1] = inb_p(SMBBLKDAT);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
|
|
char read_write, int command,
|
|
int hwpec)
|
|
{
|
|
int i, len;
|
|
int smbcmd;
|
|
int status;
|
|
int result;
|
|
int timeout;
|
|
|
|
result = i801_check_pre();
|
|
if (result < 0)
|
|
return result;
|
|
|
|
len = data->block[0];
|
|
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
outb_p(len, SMBHSTDAT0);
|
|
outb_p(data->block[1], SMBBLKDAT);
|
|
}
|
|
|
|
for (i = 1; i <= len; i++) {
|
|
if (i == len && read_write == I2C_SMBUS_READ) {
|
|
if (command == I2C_SMBUS_I2C_BLOCK_DATA)
|
|
smbcmd = I801_I2C_BLOCK_LAST;
|
|
else
|
|
smbcmd = I801_BLOCK_LAST;
|
|
} else {
|
|
if (command == I2C_SMBUS_I2C_BLOCK_DATA
|
|
&& read_write == I2C_SMBUS_READ)
|
|
smbcmd = I801_I2C_BLOCK_DATA;
|
|
else
|
|
smbcmd = I801_BLOCK_DATA;
|
|
}
|
|
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
|
|
|
|
if (i == 1)
|
|
outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
|
|
|
|
/* We will always wait for a fraction of a second! */
|
|
timeout = 0;
|
|
do {
|
|
msleep(1);
|
|
status = inb_p(SMBHSTSTS);
|
|
}
|
|
while ((!(status & SMBHSTSTS_BYTE_DONE))
|
|
&& (timeout++ < MAX_TIMEOUT));
|
|
|
|
result = i801_check_post(status, timeout > MAX_TIMEOUT);
|
|
if (result < 0)
|
|
return result;
|
|
|
|
if (i == 1 && read_write == I2C_SMBUS_READ
|
|
&& command != I2C_SMBUS_I2C_BLOCK_DATA) {
|
|
len = inb_p(SMBHSTDAT0);
|
|
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
|
|
dev_err(&I801_dev->dev,
|
|
"Illegal SMBus block read size %d\n",
|
|
len);
|
|
/* Recover */
|
|
while (inb_p(SMBHSTSTS) & SMBHSTSTS_HOST_BUSY)
|
|
outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS);
|
|
outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
|
|
return -EPROTO;
|
|
}
|
|
data->block[0] = len;
|
|
}
|
|
|
|
/* Retrieve/store value in SMBBLKDAT */
|
|
if (read_write == I2C_SMBUS_READ)
|
|
data->block[i] = inb_p(SMBBLKDAT);
|
|
if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
|
|
outb_p(data->block[i+1], SMBBLKDAT);
|
|
|
|
/* signals SMBBLKDAT ready */
|
|
outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i801_set_block_buffer_mode(void)
|
|
{
|
|
outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
|
|
if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
/* Block transaction function */
|
|
static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
|
|
int command, int hwpec)
|
|
{
|
|
int result = 0;
|
|
unsigned char hostc;
|
|
|
|
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
/* set I2C_EN bit in configuration register */
|
|
pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
|
|
pci_write_config_byte(I801_dev, SMBHSTCFG,
|
|
hostc | SMBHSTCFG_I2C_EN);
|
|
} else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
|
|
dev_err(&I801_dev->dev,
|
|
"I2C block read is unsupported!\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
if (read_write == I2C_SMBUS_WRITE
|
|
|| command == I2C_SMBUS_I2C_BLOCK_DATA) {
|
|
if (data->block[0] < 1)
|
|
data->block[0] = 1;
|
|
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
|
|
data->block[0] = I2C_SMBUS_BLOCK_MAX;
|
|
} else {
|
|
data->block[0] = 32; /* max for SMBus block reads */
|
|
}
|
|
|
|
/* Experience has shown that the block buffer can only be used for
|
|
SMBus (not I2C) block transactions, even though the datasheet
|
|
doesn't mention this limitation. */
|
|
if ((i801_features & FEATURE_BLOCK_BUFFER)
|
|
&& command != I2C_SMBUS_I2C_BLOCK_DATA
|
|
&& i801_set_block_buffer_mode() == 0)
|
|
result = i801_block_transaction_by_block(data, read_write,
|
|
hwpec);
|
|
else
|
|
result = i801_block_transaction_byte_by_byte(data, read_write,
|
|
command, hwpec);
|
|
|
|
if (result == 0 && hwpec)
|
|
i801_wait_hwpec();
|
|
|
|
if (command == I2C_SMBUS_I2C_BLOCK_DATA
|
|
&& read_write == I2C_SMBUS_WRITE) {
|
|
/* restore saved configuration register value */
|
|
pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
/* Return negative errno on error. */
|
|
static s32 i801_access(struct i2c_adapter * adap, u16 addr,
|
|
unsigned short flags, char read_write, u8 command,
|
|
int size, union i2c_smbus_data * data)
|
|
{
|
|
int hwpec;
|
|
int block = 0;
|
|
int ret, xact = 0;
|
|
|
|
hwpec = (i801_features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
|
|
&& size != I2C_SMBUS_QUICK
|
|
&& size != I2C_SMBUS_I2C_BLOCK_DATA;
|
|
|
|
switch (size) {
|
|
case I2C_SMBUS_QUICK:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD);
|
|
xact = I801_QUICK;
|
|
break;
|
|
case I2C_SMBUS_BYTE:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD);
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
outb_p(command, SMBHSTCMD);
|
|
xact = I801_BYTE;
|
|
break;
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD);
|
|
outb_p(command, SMBHSTCMD);
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
outb_p(data->byte, SMBHSTDAT0);
|
|
xact = I801_BYTE_DATA;
|
|
break;
|
|
case I2C_SMBUS_WORD_DATA:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD);
|
|
outb_p(command, SMBHSTCMD);
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
outb_p(data->word & 0xff, SMBHSTDAT0);
|
|
outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
|
|
}
|
|
xact = I801_WORD_DATA;
|
|
break;
|
|
case I2C_SMBUS_BLOCK_DATA:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD);
|
|
outb_p(command, SMBHSTCMD);
|
|
block = 1;
|
|
break;
|
|
case I2C_SMBUS_I2C_BLOCK_DATA:
|
|
/* NB: page 240 of ICH5 datasheet shows that the R/#W
|
|
* bit should be cleared here, even when reading */
|
|
outb_p((addr & 0x7f) << 1, SMBHSTADD);
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
/* NB: page 240 of ICH5 datasheet also shows
|
|
* that DATA1 is the cmd field when reading */
|
|
outb_p(command, SMBHSTDAT1);
|
|
} else
|
|
outb_p(command, SMBHSTCMD);
|
|
block = 1;
|
|
break;
|
|
default:
|
|
dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (hwpec) /* enable/disable hardware PEC */
|
|
outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL);
|
|
else
|
|
outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
|
|
|
|
if(block)
|
|
ret = i801_block_transaction(data, read_write, size, hwpec);
|
|
else
|
|
ret = i801_transaction(xact | ENABLE_INT9);
|
|
|
|
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
|
|
time, so we forcibly disable it after every transaction. Turn off
|
|
E32B for the same reason. */
|
|
if (hwpec || block)
|
|
outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
|
|
SMBAUXCTL);
|
|
|
|
if(block)
|
|
return ret;
|
|
if(ret)
|
|
return ret;
|
|
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
|
|
return 0;
|
|
|
|
switch (xact & 0x7f) {
|
|
case I801_BYTE: /* Result put in SMBHSTDAT0 */
|
|
case I801_BYTE_DATA:
|
|
data->byte = inb_p(SMBHSTDAT0);
|
|
break;
|
|
case I801_WORD_DATA:
|
|
data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static u32 i801_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
|
|
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
|
|
((i801_features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
|
|
((i801_features & FEATURE_I2C_BLOCK_READ) ?
|
|
I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
|
|
}
|
|
|
|
static const struct i2c_algorithm smbus_algorithm = {
|
|
.smbus_xfer = i801_access,
|
|
.functionality = i801_func,
|
|
};
|
|
|
|
static struct i2c_adapter i801_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
|
|
.algo = &smbus_algorithm,
|
|
};
|
|
|
|
static const struct pci_device_id i801_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CPT_SMBUS) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (pci, i801_ids);
|
|
|
|
#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
|
|
static unsigned char apanel_addr;
|
|
|
|
/* Scan the system ROM for the signature "FJKEYINF" */
|
|
static __init const void __iomem *bios_signature(const void __iomem *bios)
|
|
{
|
|
ssize_t offset;
|
|
const unsigned char signature[] = "FJKEYINF";
|
|
|
|
for (offset = 0; offset < 0x10000; offset += 0x10) {
|
|
if (check_signature(bios + offset, signature,
|
|
sizeof(signature)-1))
|
|
return bios + offset;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void __init input_apanel_init(void)
|
|
{
|
|
void __iomem *bios;
|
|
const void __iomem *p;
|
|
|
|
bios = ioremap(0xF0000, 0x10000); /* Can't fail */
|
|
p = bios_signature(bios);
|
|
if (p) {
|
|
/* just use the first address */
|
|
apanel_addr = readb(p + 8 + 3) >> 1;
|
|
}
|
|
iounmap(bios);
|
|
}
|
|
#else
|
|
static void __init input_apanel_init(void) {}
|
|
#endif
|
|
|
|
#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
|
|
struct dmi_onboard_device_info {
|
|
const char *name;
|
|
u8 type;
|
|
unsigned short i2c_addr;
|
|
const char *i2c_type;
|
|
};
|
|
|
|
static struct dmi_onboard_device_info __devinitdata dmi_devices[] = {
|
|
{ "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
|
|
{ "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
|
|
{ "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
|
|
};
|
|
|
|
static void __devinit dmi_check_onboard_device(u8 type, const char *name,
|
|
struct i2c_adapter *adap)
|
|
{
|
|
int i;
|
|
struct i2c_board_info info;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
|
|
/* & ~0x80, ignore enabled/disabled bit */
|
|
if ((type & ~0x80) != dmi_devices[i].type)
|
|
continue;
|
|
if (strcmp(name, dmi_devices[i].name))
|
|
continue;
|
|
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
info.addr = dmi_devices[i].i2c_addr;
|
|
strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
|
|
i2c_new_device(adap, &info);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* We use our own function to check for onboard devices instead of
|
|
dmi_find_device() as some buggy BIOS's have the devices we are interested
|
|
in marked as disabled */
|
|
static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
|
|
void *adap)
|
|
{
|
|
int i, count;
|
|
|
|
if (dm->type != 10)
|
|
return;
|
|
|
|
count = (dm->length - sizeof(struct dmi_header)) / 2;
|
|
for (i = 0; i < count; i++) {
|
|
const u8 *d = (char *)(dm + 1) + (i * 2);
|
|
const char *name = ((char *) dm) + dm->length;
|
|
u8 type = d[0];
|
|
u8 s = d[1];
|
|
|
|
if (!s)
|
|
continue;
|
|
s--;
|
|
while (s > 0 && name[0]) {
|
|
name += strlen(name) + 1;
|
|
s--;
|
|
}
|
|
if (name[0] == 0) /* Bogus string reference */
|
|
continue;
|
|
|
|
dmi_check_onboard_device(type, name, adap);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
unsigned char temp;
|
|
int err, i;
|
|
#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
|
|
const char *vendor;
|
|
#endif
|
|
|
|
I801_dev = dev;
|
|
i801_features = 0;
|
|
switch (dev->device) {
|
|
default:
|
|
i801_features |= FEATURE_I2C_BLOCK_READ;
|
|
/* fall through */
|
|
case PCI_DEVICE_ID_INTEL_82801DB_3:
|
|
i801_features |= FEATURE_SMBUS_PEC;
|
|
i801_features |= FEATURE_BLOCK_BUFFER;
|
|
/* fall through */
|
|
case PCI_DEVICE_ID_INTEL_82801CA_3:
|
|
case PCI_DEVICE_ID_INTEL_82801BA_2:
|
|
case PCI_DEVICE_ID_INTEL_82801AB_3:
|
|
case PCI_DEVICE_ID_INTEL_82801AA_3:
|
|
break;
|
|
}
|
|
|
|
/* Disable features on user request */
|
|
for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
|
|
if (i801_features & disable_features & (1 << i))
|
|
dev_notice(&dev->dev, "%s disabled by user\n",
|
|
i801_feature_names[i]);
|
|
}
|
|
i801_features &= ~disable_features;
|
|
|
|
err = pci_enable_device(dev);
|
|
if (err) {
|
|
dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
|
|
err);
|
|
goto exit;
|
|
}
|
|
|
|
/* Determine the address of the SMBus area */
|
|
i801_smba = pci_resource_start(dev, SMBBAR);
|
|
if (!i801_smba) {
|
|
dev_err(&dev->dev, "SMBus base address uninitialized, "
|
|
"upgrade BIOS\n");
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
|
|
if (err) {
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
err = pci_request_region(dev, SMBBAR, i801_driver.name);
|
|
if (err) {
|
|
dev_err(&dev->dev, "Failed to request SMBus region "
|
|
"0x%lx-0x%Lx\n", i801_smba,
|
|
(unsigned long long)pci_resource_end(dev, SMBBAR));
|
|
goto exit;
|
|
}
|
|
|
|
pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
|
|
i801_original_hstcfg = temp;
|
|
temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
|
|
if (!(temp & SMBHSTCFG_HST_EN)) {
|
|
dev_info(&dev->dev, "Enabling SMBus device\n");
|
|
temp |= SMBHSTCFG_HST_EN;
|
|
}
|
|
pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
|
|
|
|
if (temp & SMBHSTCFG_SMB_SMI_EN)
|
|
dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
|
|
else
|
|
dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
|
|
|
|
/* Clear special mode bits */
|
|
if (i801_features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
|
|
outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
|
|
SMBAUXCTL);
|
|
|
|
/* set up the sysfs linkage to our parent device */
|
|
i801_adapter.dev.parent = &dev->dev;
|
|
|
|
/* Retry up to 3 times on lost arbitration */
|
|
i801_adapter.retries = 3;
|
|
|
|
snprintf(i801_adapter.name, sizeof(i801_adapter.name),
|
|
"SMBus I801 adapter at %04lx", i801_smba);
|
|
err = i2c_add_adapter(&i801_adapter);
|
|
if (err) {
|
|
dev_err(&dev->dev, "Failed to add SMBus adapter\n");
|
|
goto exit_release;
|
|
}
|
|
|
|
/* Register optional slaves */
|
|
#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
|
|
if (apanel_addr) {
|
|
struct i2c_board_info info;
|
|
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
info.addr = apanel_addr;
|
|
strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
|
|
i2c_new_device(&i801_adapter, &info);
|
|
}
|
|
#endif
|
|
#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
|
|
vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
|
|
if (vendor && !strcmp(vendor, "FUJITSU SIEMENS"))
|
|
dmi_walk(dmi_check_onboard_devices, &i801_adapter);
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
exit_release:
|
|
pci_release_region(dev, SMBBAR);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static void __devexit i801_remove(struct pci_dev *dev)
|
|
{
|
|
i2c_del_adapter(&i801_adapter);
|
|
pci_write_config_byte(I801_dev, SMBHSTCFG, i801_original_hstcfg);
|
|
pci_release_region(dev, SMBBAR);
|
|
/*
|
|
* do not call pci_disable_device(dev) since it can cause hard hangs on
|
|
* some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
|
|
*/
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
|
|
{
|
|
pci_save_state(dev);
|
|
pci_write_config_byte(dev, SMBHSTCFG, i801_original_hstcfg);
|
|
pci_set_power_state(dev, pci_choose_state(dev, mesg));
|
|
return 0;
|
|
}
|
|
|
|
static int i801_resume(struct pci_dev *dev)
|
|
{
|
|
pci_set_power_state(dev, PCI_D0);
|
|
pci_restore_state(dev);
|
|
return pci_enable_device(dev);
|
|
}
|
|
#else
|
|
#define i801_suspend NULL
|
|
#define i801_resume NULL
|
|
#endif
|
|
|
|
static struct pci_driver i801_driver = {
|
|
.name = "i801_smbus",
|
|
.id_table = i801_ids,
|
|
.probe = i801_probe,
|
|
.remove = __devexit_p(i801_remove),
|
|
.suspend = i801_suspend,
|
|
.resume = i801_resume,
|
|
};
|
|
|
|
static int __init i2c_i801_init(void)
|
|
{
|
|
input_apanel_init();
|
|
return pci_register_driver(&i801_driver);
|
|
}
|
|
|
|
static void __exit i2c_i801_exit(void)
|
|
{
|
|
pci_unregister_driver(&i801_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, "
|
|
"Jean Delvare <khali@linux-fr.org>");
|
|
MODULE_DESCRIPTION("I801 SMBus driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(i2c_i801_init);
|
|
module_exit(i2c_i801_exit);
|