mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 02:23:16 +00:00
df6f3f7eb7
The driver can match only via the DT table so the table should be always used and the of_match_ptr() does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF): drivers/power/supply/bq24190_charger.c:1972:34: warning: ‘bq24190_of_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
1985 lines
53 KiB
C
1985 lines
53 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for the TI bq24190 battery charger.
|
|
*
|
|
* Author: Mark A. Greer <mgreer@animalcreek.com>
|
|
*/
|
|
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/power/bq24190_charger.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/extcon-provider.h>
|
|
|
|
#define BQ24190_MANUFACTURER "Texas Instruments"
|
|
|
|
#define BQ24190_REG_ISC 0x00 /* Input Source Control */
|
|
#define BQ24190_REG_ISC_EN_HIZ_MASK BIT(7)
|
|
#define BQ24190_REG_ISC_EN_HIZ_SHIFT 7
|
|
#define BQ24190_REG_ISC_VINDPM_MASK (BIT(6) | BIT(5) | BIT(4) | \
|
|
BIT(3))
|
|
#define BQ24190_REG_ISC_VINDPM_SHIFT 3
|
|
#define BQ24190_REG_ISC_IINLIM_MASK (BIT(2) | BIT(1) | BIT(0))
|
|
#define BQ24190_REG_ISC_IINLIM_SHIFT 0
|
|
|
|
#define BQ24190_REG_POC 0x01 /* Power-On Configuration */
|
|
#define BQ24190_REG_POC_RESET_MASK BIT(7)
|
|
#define BQ24190_REG_POC_RESET_SHIFT 7
|
|
#define BQ24190_REG_POC_WDT_RESET_MASK BIT(6)
|
|
#define BQ24190_REG_POC_WDT_RESET_SHIFT 6
|
|
#define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4))
|
|
#define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4
|
|
#define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0
|
|
#define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1
|
|
#define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2
|
|
#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1))
|
|
#define BQ24190_REG_POC_SYS_MIN_SHIFT 1
|
|
#define BQ24190_REG_POC_SYS_MIN_MIN 3000
|
|
#define BQ24190_REG_POC_SYS_MIN_MAX 3700
|
|
#define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0)
|
|
#define BQ24190_REG_POC_BOOST_LIM_SHIFT 0
|
|
|
|
#define BQ24190_REG_CCC 0x02 /* Charge Current Control */
|
|
#define BQ24190_REG_CCC_ICHG_MASK (BIT(7) | BIT(6) | BIT(5) | \
|
|
BIT(4) | BIT(3) | BIT(2))
|
|
#define BQ24190_REG_CCC_ICHG_SHIFT 2
|
|
#define BQ24190_REG_CCC_FORCE_20PCT_MASK BIT(0)
|
|
#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT 0
|
|
|
|
#define BQ24190_REG_PCTCC 0x03 /* Pre-charge/Termination Current Cntl */
|
|
#define BQ24190_REG_PCTCC_IPRECHG_MASK (BIT(7) | BIT(6) | BIT(5) | \
|
|
BIT(4))
|
|
#define BQ24190_REG_PCTCC_IPRECHG_SHIFT 4
|
|
#define BQ24190_REG_PCTCC_IPRECHG_MIN 128
|
|
#define BQ24190_REG_PCTCC_IPRECHG_MAX 2048
|
|
#define BQ24190_REG_PCTCC_ITERM_MASK (BIT(3) | BIT(2) | BIT(1) | \
|
|
BIT(0))
|
|
#define BQ24190_REG_PCTCC_ITERM_SHIFT 0
|
|
#define BQ24190_REG_PCTCC_ITERM_MIN 128
|
|
#define BQ24190_REG_PCTCC_ITERM_MAX 2048
|
|
|
|
#define BQ24190_REG_CVC 0x04 /* Charge Voltage Control */
|
|
#define BQ24190_REG_CVC_VREG_MASK (BIT(7) | BIT(6) | BIT(5) | \
|
|
BIT(4) | BIT(3) | BIT(2))
|
|
#define BQ24190_REG_CVC_VREG_SHIFT 2
|
|
#define BQ24190_REG_CVC_BATLOWV_MASK BIT(1)
|
|
#define BQ24190_REG_CVC_BATLOWV_SHIFT 1
|
|
#define BQ24190_REG_CVC_VRECHG_MASK BIT(0)
|
|
#define BQ24190_REG_CVC_VRECHG_SHIFT 0
|
|
|
|
#define BQ24190_REG_CTTC 0x05 /* Charge Term/Timer Control */
|
|
#define BQ24190_REG_CTTC_EN_TERM_MASK BIT(7)
|
|
#define BQ24190_REG_CTTC_EN_TERM_SHIFT 7
|
|
#define BQ24190_REG_CTTC_TERM_STAT_MASK BIT(6)
|
|
#define BQ24190_REG_CTTC_TERM_STAT_SHIFT 6
|
|
#define BQ24190_REG_CTTC_WATCHDOG_MASK (BIT(5) | BIT(4))
|
|
#define BQ24190_REG_CTTC_WATCHDOG_SHIFT 4
|
|
#define BQ24190_REG_CTTC_EN_TIMER_MASK BIT(3)
|
|
#define BQ24190_REG_CTTC_EN_TIMER_SHIFT 3
|
|
#define BQ24190_REG_CTTC_CHG_TIMER_MASK (BIT(2) | BIT(1))
|
|
#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT 1
|
|
#define BQ24190_REG_CTTC_JEITA_ISET_MASK BIT(0)
|
|
#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT 0
|
|
|
|
#define BQ24190_REG_ICTRC 0x06 /* IR Comp/Thermal Regulation Control */
|
|
#define BQ24190_REG_ICTRC_BAT_COMP_MASK (BIT(7) | BIT(6) | BIT(5))
|
|
#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT 5
|
|
#define BQ24190_REG_ICTRC_VCLAMP_MASK (BIT(4) | BIT(3) | BIT(2))
|
|
#define BQ24190_REG_ICTRC_VCLAMP_SHIFT 2
|
|
#define BQ24190_REG_ICTRC_TREG_MASK (BIT(1) | BIT(0))
|
|
#define BQ24190_REG_ICTRC_TREG_SHIFT 0
|
|
|
|
#define BQ24190_REG_MOC 0x07 /* Misc. Operation Control */
|
|
#define BQ24190_REG_MOC_DPDM_EN_MASK BIT(7)
|
|
#define BQ24190_REG_MOC_DPDM_EN_SHIFT 7
|
|
#define BQ24190_REG_MOC_TMR2X_EN_MASK BIT(6)
|
|
#define BQ24190_REG_MOC_TMR2X_EN_SHIFT 6
|
|
#define BQ24190_REG_MOC_BATFET_DISABLE_MASK BIT(5)
|
|
#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT 5
|
|
#define BQ24190_REG_MOC_JEITA_VSET_MASK BIT(4)
|
|
#define BQ24190_REG_MOC_JEITA_VSET_SHIFT 4
|
|
#define BQ24190_REG_MOC_INT_MASK_MASK (BIT(1) | BIT(0))
|
|
#define BQ24190_REG_MOC_INT_MASK_SHIFT 0
|
|
|
|
#define BQ24190_REG_SS 0x08 /* System Status */
|
|
#define BQ24190_REG_SS_VBUS_STAT_MASK (BIT(7) | BIT(6))
|
|
#define BQ24190_REG_SS_VBUS_STAT_SHIFT 6
|
|
#define BQ24190_REG_SS_CHRG_STAT_MASK (BIT(5) | BIT(4))
|
|
#define BQ24190_REG_SS_CHRG_STAT_SHIFT 4
|
|
#define BQ24190_REG_SS_DPM_STAT_MASK BIT(3)
|
|
#define BQ24190_REG_SS_DPM_STAT_SHIFT 3
|
|
#define BQ24190_REG_SS_PG_STAT_MASK BIT(2)
|
|
#define BQ24190_REG_SS_PG_STAT_SHIFT 2
|
|
#define BQ24190_REG_SS_THERM_STAT_MASK BIT(1)
|
|
#define BQ24190_REG_SS_THERM_STAT_SHIFT 1
|
|
#define BQ24190_REG_SS_VSYS_STAT_MASK BIT(0)
|
|
#define BQ24190_REG_SS_VSYS_STAT_SHIFT 0
|
|
|
|
#define BQ24190_REG_F 0x09 /* Fault */
|
|
#define BQ24190_REG_F_WATCHDOG_FAULT_MASK BIT(7)
|
|
#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT 7
|
|
#define BQ24190_REG_F_BOOST_FAULT_MASK BIT(6)
|
|
#define BQ24190_REG_F_BOOST_FAULT_SHIFT 6
|
|
#define BQ24190_REG_F_CHRG_FAULT_MASK (BIT(5) | BIT(4))
|
|
#define BQ24190_REG_F_CHRG_FAULT_SHIFT 4
|
|
#define BQ24190_REG_F_BAT_FAULT_MASK BIT(3)
|
|
#define BQ24190_REG_F_BAT_FAULT_SHIFT 3
|
|
#define BQ24190_REG_F_NTC_FAULT_MASK (BIT(2) | BIT(1) | BIT(0))
|
|
#define BQ24190_REG_F_NTC_FAULT_SHIFT 0
|
|
|
|
#define BQ24190_REG_VPRS 0x0A /* Vendor/Part/Revision Status */
|
|
#define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3))
|
|
#define BQ24190_REG_VPRS_PN_SHIFT 3
|
|
#define BQ24190_REG_VPRS_PN_24190 0x4
|
|
#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193, 24196 */
|
|
#define BQ24190_REG_VPRS_PN_24192I 0x3
|
|
#define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2)
|
|
#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2
|
|
#define BQ24190_REG_VPRS_DEV_REG_MASK (BIT(1) | BIT(0))
|
|
#define BQ24190_REG_VPRS_DEV_REG_SHIFT 0
|
|
|
|
/*
|
|
* The FAULT register is latched by the bq24190 (except for NTC_FAULT)
|
|
* so the first read after a fault returns the latched value and subsequent
|
|
* reads return the current value. In order to return the fault status
|
|
* to the user, have the interrupt handler save the reg's value and retrieve
|
|
* it in the appropriate health/status routine.
|
|
*/
|
|
struct bq24190_dev_info {
|
|
struct i2c_client *client;
|
|
struct device *dev;
|
|
struct extcon_dev *edev;
|
|
struct power_supply *charger;
|
|
struct power_supply *battery;
|
|
struct delayed_work input_current_limit_work;
|
|
char model_name[I2C_NAME_SIZE];
|
|
bool initialized;
|
|
bool irq_event;
|
|
u16 sys_min;
|
|
u16 iprechg;
|
|
u16 iterm;
|
|
struct mutex f_reg_lock;
|
|
u8 f_reg;
|
|
u8 ss_reg;
|
|
u8 watchdog;
|
|
};
|
|
|
|
static const unsigned int bq24190_usb_extcon_cable[] = {
|
|
EXTCON_USB,
|
|
EXTCON_NONE,
|
|
};
|
|
|
|
/*
|
|
* The tables below provide a 2-way mapping for the value that goes in
|
|
* the register field and the real-world value that it represents.
|
|
* The index of the array is the value that goes in the register; the
|
|
* number at that index in the array is the real-world value that it
|
|
* represents.
|
|
*/
|
|
|
|
/* REG00[2:0] (IINLIM) in uAh */
|
|
static const int bq24190_isc_iinlim_values[] = {
|
|
100000, 150000, 500000, 900000, 1200000, 1500000, 2000000, 3000000
|
|
};
|
|
|
|
/* REG02[7:2] (ICHG) in uAh */
|
|
static const int bq24190_ccc_ichg_values[] = {
|
|
512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000,
|
|
1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000,
|
|
1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000,
|
|
2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000,
|
|
2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000,
|
|
3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000,
|
|
3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000,
|
|
4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000
|
|
};
|
|
|
|
/* REG04[7:2] (VREG) in uV */
|
|
static const int bq24190_cvc_vreg_values[] = {
|
|
3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000,
|
|
3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000,
|
|
3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000,
|
|
3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000,
|
|
4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000,
|
|
4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000,
|
|
4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000,
|
|
4400000
|
|
};
|
|
|
|
/* REG06[1:0] (TREG) in tenths of degrees Celsius */
|
|
static const int bq24190_ictrc_treg_values[] = {
|
|
600, 800, 1000, 1200
|
|
};
|
|
|
|
/*
|
|
* Return the index in 'tbl' of greatest value that is less than or equal to
|
|
* 'val'. The index range returned is 0 to 'tbl_size' - 1. Assumes that
|
|
* the values in 'tbl' are sorted from smallest to largest and 'tbl_size'
|
|
* is less than 2^8.
|
|
*/
|
|
static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v)
|
|
{
|
|
int i;
|
|
|
|
for (i = 1; i < tbl_size; i++)
|
|
if (v < tbl[i])
|
|
break;
|
|
|
|
return i - 1;
|
|
}
|
|
|
|
/* Basic driver I/O routines */
|
|
|
|
static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(bdi->client, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*data = ret;
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data)
|
|
{
|
|
return i2c_smbus_write_byte_data(bdi->client, reg, data);
|
|
}
|
|
|
|
static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg,
|
|
u8 mask, u8 shift, u8 *data)
|
|
{
|
|
u8 v;
|
|
int ret;
|
|
|
|
ret = bq24190_read(bdi, reg, &v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
v &= mask;
|
|
v >>= shift;
|
|
*data = v;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg,
|
|
u8 mask, u8 shift, u8 data)
|
|
{
|
|
u8 v;
|
|
int ret;
|
|
|
|
ret = bq24190_read(bdi, reg, &v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
v &= ~mask;
|
|
v |= ((data << shift) & mask);
|
|
|
|
return bq24190_write(bdi, reg, v);
|
|
}
|
|
|
|
static int bq24190_get_field_val(struct bq24190_dev_info *bdi,
|
|
u8 reg, u8 mask, u8 shift,
|
|
const int tbl[], int tbl_size,
|
|
int *val)
|
|
{
|
|
u8 v;
|
|
int ret;
|
|
|
|
ret = bq24190_read_mask(bdi, reg, mask, shift, &v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
v = (v >= tbl_size) ? (tbl_size - 1) : v;
|
|
*val = tbl[v];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_set_field_val(struct bq24190_dev_info *bdi,
|
|
u8 reg, u8 mask, u8 shift,
|
|
const int tbl[], int tbl_size,
|
|
int val)
|
|
{
|
|
u8 idx;
|
|
|
|
idx = bq24190_find_idx(tbl, tbl_size, val);
|
|
|
|
return bq24190_write_mask(bdi, reg, mask, shift, idx);
|
|
}
|
|
|
|
#ifdef CONFIG_SYSFS
|
|
/*
|
|
* There are a numerous options that are configurable on the bq24190
|
|
* that go well beyond what the power_supply properties provide access to.
|
|
* Provide sysfs access to them so they can be examined and possibly modified
|
|
* on the fly. They will be provided for the charger power_supply object only
|
|
* and will be prefixed by 'f_' to make them easier to recognize.
|
|
*/
|
|
|
|
#define BQ24190_SYSFS_FIELD(_name, r, f, m, store) \
|
|
{ \
|
|
.attr = __ATTR(f_##_name, m, bq24190_sysfs_show, store), \
|
|
.reg = BQ24190_REG_##r, \
|
|
.mask = BQ24190_REG_##r##_##f##_MASK, \
|
|
.shift = BQ24190_REG_##r##_##f##_SHIFT, \
|
|
}
|
|
|
|
#define BQ24190_SYSFS_FIELD_RW(_name, r, f) \
|
|
BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO, \
|
|
bq24190_sysfs_store)
|
|
|
|
#define BQ24190_SYSFS_FIELD_RO(_name, r, f) \
|
|
BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL)
|
|
|
|
static ssize_t bq24190_sysfs_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf);
|
|
static ssize_t bq24190_sysfs_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count);
|
|
|
|
struct bq24190_sysfs_field_info {
|
|
struct device_attribute attr;
|
|
u8 reg;
|
|
u8 mask;
|
|
u8 shift;
|
|
};
|
|
|
|
/* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */
|
|
#undef SS
|
|
|
|
static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = {
|
|
/* sysfs name reg field in reg */
|
|
BQ24190_SYSFS_FIELD_RW(en_hiz, ISC, EN_HIZ),
|
|
BQ24190_SYSFS_FIELD_RW(vindpm, ISC, VINDPM),
|
|
BQ24190_SYSFS_FIELD_RW(iinlim, ISC, IINLIM),
|
|
BQ24190_SYSFS_FIELD_RW(chg_config, POC, CHG_CONFIG),
|
|
BQ24190_SYSFS_FIELD_RW(sys_min, POC, SYS_MIN),
|
|
BQ24190_SYSFS_FIELD_RW(boost_lim, POC, BOOST_LIM),
|
|
BQ24190_SYSFS_FIELD_RW(ichg, CCC, ICHG),
|
|
BQ24190_SYSFS_FIELD_RW(force_20_pct, CCC, FORCE_20PCT),
|
|
BQ24190_SYSFS_FIELD_RW(iprechg, PCTCC, IPRECHG),
|
|
BQ24190_SYSFS_FIELD_RW(iterm, PCTCC, ITERM),
|
|
BQ24190_SYSFS_FIELD_RW(vreg, CVC, VREG),
|
|
BQ24190_SYSFS_FIELD_RW(batlowv, CVC, BATLOWV),
|
|
BQ24190_SYSFS_FIELD_RW(vrechg, CVC, VRECHG),
|
|
BQ24190_SYSFS_FIELD_RW(en_term, CTTC, EN_TERM),
|
|
BQ24190_SYSFS_FIELD_RW(term_stat, CTTC, TERM_STAT),
|
|
BQ24190_SYSFS_FIELD_RO(watchdog, CTTC, WATCHDOG),
|
|
BQ24190_SYSFS_FIELD_RW(en_timer, CTTC, EN_TIMER),
|
|
BQ24190_SYSFS_FIELD_RW(chg_timer, CTTC, CHG_TIMER),
|
|
BQ24190_SYSFS_FIELD_RW(jeta_iset, CTTC, JEITA_ISET),
|
|
BQ24190_SYSFS_FIELD_RW(bat_comp, ICTRC, BAT_COMP),
|
|
BQ24190_SYSFS_FIELD_RW(vclamp, ICTRC, VCLAMP),
|
|
BQ24190_SYSFS_FIELD_RW(treg, ICTRC, TREG),
|
|
BQ24190_SYSFS_FIELD_RW(dpdm_en, MOC, DPDM_EN),
|
|
BQ24190_SYSFS_FIELD_RW(tmr2x_en, MOC, TMR2X_EN),
|
|
BQ24190_SYSFS_FIELD_RW(batfet_disable, MOC, BATFET_DISABLE),
|
|
BQ24190_SYSFS_FIELD_RW(jeita_vset, MOC, JEITA_VSET),
|
|
BQ24190_SYSFS_FIELD_RO(int_mask, MOC, INT_MASK),
|
|
BQ24190_SYSFS_FIELD_RO(vbus_stat, SS, VBUS_STAT),
|
|
BQ24190_SYSFS_FIELD_RO(chrg_stat, SS, CHRG_STAT),
|
|
BQ24190_SYSFS_FIELD_RO(dpm_stat, SS, DPM_STAT),
|
|
BQ24190_SYSFS_FIELD_RO(pg_stat, SS, PG_STAT),
|
|
BQ24190_SYSFS_FIELD_RO(therm_stat, SS, THERM_STAT),
|
|
BQ24190_SYSFS_FIELD_RO(vsys_stat, SS, VSYS_STAT),
|
|
BQ24190_SYSFS_FIELD_RO(watchdog_fault, F, WATCHDOG_FAULT),
|
|
BQ24190_SYSFS_FIELD_RO(boost_fault, F, BOOST_FAULT),
|
|
BQ24190_SYSFS_FIELD_RO(chrg_fault, F, CHRG_FAULT),
|
|
BQ24190_SYSFS_FIELD_RO(bat_fault, F, BAT_FAULT),
|
|
BQ24190_SYSFS_FIELD_RO(ntc_fault, F, NTC_FAULT),
|
|
BQ24190_SYSFS_FIELD_RO(pn, VPRS, PN),
|
|
BQ24190_SYSFS_FIELD_RO(ts_profile, VPRS, TS_PROFILE),
|
|
BQ24190_SYSFS_FIELD_RO(dev_reg, VPRS, DEV_REG),
|
|
};
|
|
|
|
static struct attribute *
|
|
bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1];
|
|
|
|
ATTRIBUTE_GROUPS(bq24190_sysfs);
|
|
|
|
static void bq24190_sysfs_init_attrs(void)
|
|
{
|
|
int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
|
|
|
|
for (i = 0; i < limit; i++)
|
|
bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr;
|
|
|
|
bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */
|
|
}
|
|
|
|
static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup(
|
|
const char *name)
|
|
{
|
|
int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
|
|
|
|
for (i = 0; i < limit; i++)
|
|
if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name))
|
|
break;
|
|
|
|
if (i >= limit)
|
|
return NULL;
|
|
|
|
return &bq24190_sysfs_field_tbl[i];
|
|
}
|
|
|
|
static ssize_t bq24190_sysfs_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct power_supply *psy = dev_get_drvdata(dev);
|
|
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
|
|
struct bq24190_sysfs_field_info *info;
|
|
ssize_t count;
|
|
int ret;
|
|
u8 v;
|
|
|
|
info = bq24190_sysfs_field_lookup(attr->attr.name);
|
|
if (!info)
|
|
return -EINVAL;
|
|
|
|
ret = pm_runtime_get_sync(bdi->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
return ret;
|
|
}
|
|
|
|
ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
|
|
if (ret)
|
|
count = ret;
|
|
else
|
|
count = scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
|
|
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t bq24190_sysfs_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct power_supply *psy = dev_get_drvdata(dev);
|
|
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
|
|
struct bq24190_sysfs_field_info *info;
|
|
int ret;
|
|
u8 v;
|
|
|
|
info = bq24190_sysfs_field_lookup(attr->attr.name);
|
|
if (!info)
|
|
return -EINVAL;
|
|
|
|
ret = kstrtou8(buf, 0, &v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pm_runtime_get_sync(bdi->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
return ret;
|
|
}
|
|
|
|
ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
|
|
if (ret)
|
|
count = ret;
|
|
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
|
|
return count;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_REGULATOR
|
|
static int bq24190_set_charge_mode(struct regulator_dev *dev, u8 val)
|
|
{
|
|
struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = pm_runtime_get_sync(bdi->dev);
|
|
if (ret < 0) {
|
|
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
return ret;
|
|
}
|
|
|
|
ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
|
|
BQ24190_REG_POC_CHG_CONFIG_MASK,
|
|
BQ24190_REG_POC_CHG_CONFIG_SHIFT, val);
|
|
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bq24190_vbus_enable(struct regulator_dev *dev)
|
|
{
|
|
return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_OTG);
|
|
}
|
|
|
|
static int bq24190_vbus_disable(struct regulator_dev *dev)
|
|
{
|
|
return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_CHARGE);
|
|
}
|
|
|
|
static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
|
|
{
|
|
struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
|
|
int ret;
|
|
u8 val;
|
|
|
|
ret = pm_runtime_get_sync(bdi->dev);
|
|
if (ret < 0) {
|
|
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
return ret;
|
|
}
|
|
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
|
|
BQ24190_REG_POC_CHG_CONFIG_MASK,
|
|
BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val);
|
|
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
|
|
return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG;
|
|
}
|
|
|
|
static const struct regulator_ops bq24190_vbus_ops = {
|
|
.enable = bq24190_vbus_enable,
|
|
.disable = bq24190_vbus_disable,
|
|
.is_enabled = bq24190_vbus_is_enabled,
|
|
};
|
|
|
|
static const struct regulator_desc bq24190_vbus_desc = {
|
|
.name = "usb_otg_vbus",
|
|
.of_match = "usb-otg-vbus",
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.ops = &bq24190_vbus_ops,
|
|
.fixed_uV = 5000000,
|
|
.n_voltages = 1,
|
|
};
|
|
|
|
static const struct regulator_init_data bq24190_vbus_init_data = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
|
|
{
|
|
struct bq24190_platform_data *pdata = bdi->dev->platform_data;
|
|
struct regulator_config cfg = { };
|
|
struct regulator_dev *reg;
|
|
int ret = 0;
|
|
|
|
cfg.dev = bdi->dev;
|
|
if (pdata && pdata->regulator_init_data)
|
|
cfg.init_data = pdata->regulator_init_data;
|
|
else
|
|
cfg.init_data = &bq24190_vbus_init_data;
|
|
cfg.driver_data = bdi;
|
|
reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg);
|
|
if (IS_ERR(reg)) {
|
|
ret = PTR_ERR(reg);
|
|
dev_err(bdi->dev, "Can't register regulator: %d\n", ret);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#else
|
|
static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int bq24190_set_config(struct bq24190_dev_info *bdi)
|
|
{
|
|
int ret;
|
|
u8 v;
|
|
|
|
ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
|
|
BQ24190_REG_CTTC_WATCHDOG_SHIFT);
|
|
|
|
/*
|
|
* According to the "Host Mode and default Mode" section of the
|
|
* manual, a write to any register causes the bq24190 to switch
|
|
* from default mode to host mode. It will switch back to default
|
|
* mode after a WDT timeout unless the WDT is turned off as well.
|
|
* So, by simply turning off the WDT, we accomplish both with the
|
|
* same write.
|
|
*/
|
|
v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
|
|
|
|
ret = bq24190_write(bdi, BQ24190_REG_CTTC, v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (bdi->sys_min) {
|
|
v = bdi->sys_min / 100 - 30; // manual section 9.5.1.2, table 9
|
|
ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
|
|
BQ24190_REG_POC_SYS_MIN_MASK,
|
|
BQ24190_REG_POC_SYS_MIN_SHIFT,
|
|
v);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (bdi->iprechg) {
|
|
v = bdi->iprechg / 128 - 1; // manual section 9.5.1.4, table 11
|
|
ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
|
|
BQ24190_REG_PCTCC_IPRECHG_MASK,
|
|
BQ24190_REG_PCTCC_IPRECHG_SHIFT,
|
|
v);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (bdi->iterm) {
|
|
v = bdi->iterm / 128 - 1; // manual section 9.5.1.4, table 11
|
|
ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
|
|
BQ24190_REG_PCTCC_ITERM_MASK,
|
|
BQ24190_REG_PCTCC_ITERM_SHIFT,
|
|
v);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_register_reset(struct bq24190_dev_info *bdi)
|
|
{
|
|
int ret, limit = 100;
|
|
u8 v;
|
|
|
|
/*
|
|
* This prop. can be passed on device instantiation from platform code:
|
|
* struct property_entry pe[] =
|
|
* { PROPERTY_ENTRY_BOOL("disable-reset"), ... };
|
|
* struct i2c_board_info bi =
|
|
* { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
|
|
* struct i2c_adapter ad = { ... };
|
|
* i2c_add_adapter(&ad);
|
|
* i2c_new_client_device(&ad, &bi);
|
|
*/
|
|
if (device_property_read_bool(bdi->dev, "disable-reset"))
|
|
return 0;
|
|
|
|
/* Reset the registers */
|
|
ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
|
|
BQ24190_REG_POC_RESET_MASK,
|
|
BQ24190_REG_POC_RESET_SHIFT,
|
|
0x1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Reset bit will be cleared by hardware so poll until it is */
|
|
do {
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
|
|
BQ24190_REG_POC_RESET_MASK,
|
|
BQ24190_REG_POC_RESET_SHIFT,
|
|
&v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (v == 0)
|
|
return 0;
|
|
|
|
usleep_range(100, 200);
|
|
} while (--limit);
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
/* Charger power supply property routines */
|
|
|
|
static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
u8 v;
|
|
int type, ret;
|
|
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
|
|
BQ24190_REG_POC_CHG_CONFIG_MASK,
|
|
BQ24190_REG_POC_CHG_CONFIG_SHIFT,
|
|
&v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */
|
|
if (!v) {
|
|
type = POWER_SUPPLY_CHARGE_TYPE_NONE;
|
|
} else {
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
|
|
BQ24190_REG_CCC_FORCE_20PCT_MASK,
|
|
BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
|
|
&v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE :
|
|
POWER_SUPPLY_CHARGE_TYPE_FAST;
|
|
}
|
|
|
|
val->intval = type;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val)
|
|
{
|
|
u8 chg_config, force_20pct, en_term;
|
|
int ret;
|
|
|
|
/*
|
|
* According to the "Termination when REG02[0] = 1" section of
|
|
* the bq24190 manual, the trickle charge could be less than the
|
|
* termination current so it recommends turning off the termination
|
|
* function.
|
|
*
|
|
* Note: AFAICT from the datasheet, the user will have to manually
|
|
* turn off the charging when in 20% mode. If its not turned off,
|
|
* there could be battery damage. So, use this mode at your own risk.
|
|
*/
|
|
switch (val->intval) {
|
|
case POWER_SUPPLY_CHARGE_TYPE_NONE:
|
|
chg_config = 0x0;
|
|
break;
|
|
case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
|
|
chg_config = 0x1;
|
|
force_20pct = 0x1;
|
|
en_term = 0x0;
|
|
break;
|
|
case POWER_SUPPLY_CHARGE_TYPE_FAST:
|
|
chg_config = 0x1;
|
|
force_20pct = 0x0;
|
|
en_term = 0x1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (chg_config) { /* Enabling the charger */
|
|
ret = bq24190_write_mask(bdi, BQ24190_REG_CCC,
|
|
BQ24190_REG_CCC_FORCE_20PCT_MASK,
|
|
BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
|
|
force_20pct);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC,
|
|
BQ24190_REG_CTTC_EN_TERM_MASK,
|
|
BQ24190_REG_CTTC_EN_TERM_SHIFT,
|
|
en_term);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return bq24190_write_mask(bdi, BQ24190_REG_POC,
|
|
BQ24190_REG_POC_CHG_CONFIG_MASK,
|
|
BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config);
|
|
}
|
|
|
|
static int bq24190_charger_get_health(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
u8 v;
|
|
int health;
|
|
|
|
mutex_lock(&bdi->f_reg_lock);
|
|
v = bdi->f_reg;
|
|
mutex_unlock(&bdi->f_reg_lock);
|
|
|
|
if (v & BQ24190_REG_F_NTC_FAULT_MASK) {
|
|
switch (v >> BQ24190_REG_F_NTC_FAULT_SHIFT & 0x7) {
|
|
case 0x1: /* TS1 Cold */
|
|
case 0x3: /* TS2 Cold */
|
|
case 0x5: /* Both Cold */
|
|
health = POWER_SUPPLY_HEALTH_COLD;
|
|
break;
|
|
case 0x2: /* TS1 Hot */
|
|
case 0x4: /* TS2 Hot */
|
|
case 0x6: /* Both Hot */
|
|
health = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
break;
|
|
default:
|
|
health = POWER_SUPPLY_HEALTH_UNKNOWN;
|
|
}
|
|
} else if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
|
|
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
|
|
} else if (v & BQ24190_REG_F_CHRG_FAULT_MASK) {
|
|
switch (v >> BQ24190_REG_F_CHRG_FAULT_SHIFT & 0x3) {
|
|
case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */
|
|
/*
|
|
* This could be over-voltage or under-voltage
|
|
* and there's no way to tell which. Instead
|
|
* of looking foolish and returning 'OVERVOLTAGE'
|
|
* when its really under-voltage, just return
|
|
* 'UNSPEC_FAILURE'.
|
|
*/
|
|
health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
|
|
break;
|
|
case 0x2: /* Thermal Shutdown */
|
|
health = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
break;
|
|
case 0x3: /* Charge Safety Timer Expiration */
|
|
health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
|
|
break;
|
|
default: /* prevent compiler warning */
|
|
health = -1;
|
|
}
|
|
} else if (v & BQ24190_REG_F_BOOST_FAULT_MASK) {
|
|
/*
|
|
* This could be over-current or over-voltage but there's
|
|
* no way to tell which. Return 'OVERVOLTAGE' since there
|
|
* isn't an 'OVERCURRENT' value defined that we can return
|
|
* even if it was over-current.
|
|
*/
|
|
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
|
|
} else {
|
|
health = POWER_SUPPLY_HEALTH_GOOD;
|
|
}
|
|
|
|
val->intval = health;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_charger_get_online(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
u8 pg_stat, batfet_disable;
|
|
int ret;
|
|
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_SS,
|
|
BQ24190_REG_SS_PG_STAT_MASK,
|
|
BQ24190_REG_SS_PG_STAT_SHIFT, &pg_stat);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
|
|
BQ24190_REG_MOC_BATFET_DISABLE_MASK,
|
|
BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = pg_stat && !batfet_disable;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val);
|
|
static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val);
|
|
static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val);
|
|
static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val);
|
|
|
|
static int bq24190_charger_set_online(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val)
|
|
{
|
|
return bq24190_battery_set_online(bdi, val);
|
|
}
|
|
|
|
static int bq24190_charger_get_status(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
return bq24190_battery_get_status(bdi, val);
|
|
}
|
|
|
|
static int bq24190_charger_get_temp_alert_max(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
return bq24190_battery_get_temp_alert_max(bdi, val);
|
|
}
|
|
|
|
static int bq24190_charger_set_temp_alert_max(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val)
|
|
{
|
|
return bq24190_battery_set_temp_alert_max(bdi, val);
|
|
}
|
|
|
|
static int bq24190_charger_get_precharge(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
u8 v;
|
|
int ret;
|
|
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
|
|
BQ24190_REG_PCTCC_IPRECHG_MASK,
|
|
BQ24190_REG_PCTCC_IPRECHG_SHIFT, &v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = ++v * 128 * 1000;
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_charger_get_charge_term(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
u8 v;
|
|
int ret;
|
|
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
|
|
BQ24190_REG_PCTCC_ITERM_MASK,
|
|
BQ24190_REG_PCTCC_ITERM_SHIFT, &v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = ++v * 128 * 1000;
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_charger_get_current(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
u8 v;
|
|
int curr, ret;
|
|
|
|
ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC,
|
|
BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
|
|
bq24190_ccc_ichg_values,
|
|
ARRAY_SIZE(bq24190_ccc_ichg_values), &curr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
|
|
BQ24190_REG_CCC_FORCE_20PCT_MASK,
|
|
BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* If FORCE_20PCT is enabled, then current is 20% of ICHG value */
|
|
if (v)
|
|
curr /= 5;
|
|
|
|
val->intval = curr;
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_charger_get_current_max(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
int idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1;
|
|
|
|
val->intval = bq24190_ccc_ichg_values[idx];
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_charger_set_current(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val)
|
|
{
|
|
u8 v;
|
|
int ret, curr = val->intval;
|
|
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
|
|
BQ24190_REG_CCC_FORCE_20PCT_MASK,
|
|
BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */
|
|
if (v)
|
|
curr *= 5;
|
|
|
|
return bq24190_set_field_val(bdi, BQ24190_REG_CCC,
|
|
BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
|
|
bq24190_ccc_ichg_values,
|
|
ARRAY_SIZE(bq24190_ccc_ichg_values), curr);
|
|
}
|
|
|
|
static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
int voltage, ret;
|
|
|
|
ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC,
|
|
BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
|
|
bq24190_cvc_vreg_values,
|
|
ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = voltage;
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_charger_get_voltage_max(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
int idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1;
|
|
|
|
val->intval = bq24190_cvc_vreg_values[idx];
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val)
|
|
{
|
|
return bq24190_set_field_val(bdi, BQ24190_REG_CVC,
|
|
BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
|
|
bq24190_cvc_vreg_values,
|
|
ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
|
|
}
|
|
|
|
static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
int iinlimit, ret;
|
|
|
|
ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC,
|
|
BQ24190_REG_ISC_IINLIM_MASK,
|
|
BQ24190_REG_ISC_IINLIM_SHIFT,
|
|
bq24190_isc_iinlim_values,
|
|
ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = iinlimit;
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val)
|
|
{
|
|
return bq24190_set_field_val(bdi, BQ24190_REG_ISC,
|
|
BQ24190_REG_ISC_IINLIM_MASK,
|
|
BQ24190_REG_ISC_IINLIM_SHIFT,
|
|
bq24190_isc_iinlim_values,
|
|
ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval);
|
|
}
|
|
|
|
static int bq24190_charger_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp, union power_supply_propval *val)
|
|
{
|
|
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
|
|
int ret;
|
|
|
|
dev_dbg(bdi->dev, "prop: %d\n", psp);
|
|
|
|
ret = pm_runtime_get_sync(bdi->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
return ret;
|
|
}
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_CHARGE_TYPE:
|
|
ret = bq24190_charger_get_charge_type(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
ret = bq24190_charger_get_health(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
ret = bq24190_charger_get_online(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
ret = bq24190_charger_get_status(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
|
|
ret = bq24190_charger_get_temp_alert_max(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
|
|
ret = bq24190_charger_get_precharge(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
|
|
ret = bq24190_charger_get_charge_term(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
ret = bq24190_charger_get_current(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
|
|
ret = bq24190_charger_get_current_max(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
|
|
ret = bq24190_charger_get_voltage(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
|
|
ret = bq24190_charger_get_voltage_max(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
|
|
ret = bq24190_charger_get_iinlimit(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_SCOPE:
|
|
val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
|
|
ret = 0;
|
|
break;
|
|
case POWER_SUPPLY_PROP_MODEL_NAME:
|
|
val->strval = bdi->model_name;
|
|
ret = 0;
|
|
break;
|
|
case POWER_SUPPLY_PROP_MANUFACTURER:
|
|
val->strval = BQ24190_MANUFACTURER;
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
ret = -ENODATA;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bq24190_charger_set_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
const union power_supply_propval *val)
|
|
{
|
|
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
|
|
int ret;
|
|
|
|
dev_dbg(bdi->dev, "prop: %d\n", psp);
|
|
|
|
ret = pm_runtime_get_sync(bdi->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
return ret;
|
|
}
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
ret = bq24190_charger_set_online(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
|
|
ret = bq24190_charger_set_temp_alert_max(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_TYPE:
|
|
ret = bq24190_charger_set_charge_type(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
ret = bq24190_charger_set_current(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
|
|
ret = bq24190_charger_set_voltage(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
|
|
ret = bq24190_charger_set_iinlimit(bdi, val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bq24190_charger_property_is_writeable(struct power_supply *psy,
|
|
enum power_supply_property psp)
|
|
{
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
|
|
case POWER_SUPPLY_PROP_CHARGE_TYPE:
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
|
|
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void bq24190_input_current_limit_work(struct work_struct *work)
|
|
{
|
|
struct bq24190_dev_info *bdi =
|
|
container_of(work, struct bq24190_dev_info,
|
|
input_current_limit_work.work);
|
|
|
|
power_supply_set_input_current_limit_from_supplier(bdi->charger);
|
|
}
|
|
|
|
/* Sync the input-current-limit with our parent supply (if we have one) */
|
|
static void bq24190_charger_external_power_changed(struct power_supply *psy)
|
|
{
|
|
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
|
|
|
|
/*
|
|
* The Power-Good detection may take up to 220ms, sometimes
|
|
* the external charger detection is quicker, and the bq24190 will
|
|
* reset to iinlim based on its own charger detection (which is not
|
|
* hooked up when using external charger detection) resulting in a
|
|
* too low default 500mA iinlim. Delay setting the input-current-limit
|
|
* for 300ms to avoid this.
|
|
*/
|
|
queue_delayed_work(system_wq, &bdi->input_current_limit_work,
|
|
msecs_to_jiffies(300));
|
|
}
|
|
|
|
static enum power_supply_property bq24190_charger_properties[] = {
|
|
POWER_SUPPLY_PROP_CHARGE_TYPE,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
|
|
POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
|
|
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
|
|
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
|
|
POWER_SUPPLY_PROP_SCOPE,
|
|
POWER_SUPPLY_PROP_MODEL_NAME,
|
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
|
};
|
|
|
|
static char *bq24190_charger_supplied_to[] = {
|
|
"main-battery",
|
|
};
|
|
|
|
static const struct power_supply_desc bq24190_charger_desc = {
|
|
.name = "bq24190-charger",
|
|
.type = POWER_SUPPLY_TYPE_USB,
|
|
.properties = bq24190_charger_properties,
|
|
.num_properties = ARRAY_SIZE(bq24190_charger_properties),
|
|
.get_property = bq24190_charger_get_property,
|
|
.set_property = bq24190_charger_set_property,
|
|
.property_is_writeable = bq24190_charger_property_is_writeable,
|
|
.external_power_changed = bq24190_charger_external_power_changed,
|
|
};
|
|
|
|
/* Battery power supply property routines */
|
|
|
|
static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
u8 ss_reg, chrg_fault;
|
|
int status, ret;
|
|
|
|
mutex_lock(&bdi->f_reg_lock);
|
|
chrg_fault = bdi->f_reg;
|
|
mutex_unlock(&bdi->f_reg_lock);
|
|
|
|
chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK;
|
|
chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
|
|
|
|
ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* The battery must be discharging when any of these are true:
|
|
* - there is no good power source;
|
|
* - there is a charge fault.
|
|
* Could also be discharging when in "supplement mode" but
|
|
* there is no way to tell when its in that mode.
|
|
*/
|
|
if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) {
|
|
status = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
} else {
|
|
ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK;
|
|
ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT;
|
|
|
|
switch (ss_reg) {
|
|
case 0x0: /* Not Charging */
|
|
status = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
break;
|
|
case 0x1: /* Pre-charge */
|
|
case 0x2: /* Fast Charging */
|
|
status = POWER_SUPPLY_STATUS_CHARGING;
|
|
break;
|
|
case 0x3: /* Charge Termination Done */
|
|
status = POWER_SUPPLY_STATUS_FULL;
|
|
break;
|
|
default:
|
|
ret = -EIO;
|
|
}
|
|
}
|
|
|
|
if (!ret)
|
|
val->intval = status;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bq24190_battery_get_health(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
u8 v;
|
|
int health;
|
|
|
|
mutex_lock(&bdi->f_reg_lock);
|
|
v = bdi->f_reg;
|
|
mutex_unlock(&bdi->f_reg_lock);
|
|
|
|
if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
|
|
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
|
|
} else {
|
|
v &= BQ24190_REG_F_NTC_FAULT_MASK;
|
|
v >>= BQ24190_REG_F_NTC_FAULT_SHIFT;
|
|
|
|
switch (v) {
|
|
case 0x0: /* Normal */
|
|
health = POWER_SUPPLY_HEALTH_GOOD;
|
|
break;
|
|
case 0x1: /* TS1 Cold */
|
|
case 0x3: /* TS2 Cold */
|
|
case 0x5: /* Both Cold */
|
|
health = POWER_SUPPLY_HEALTH_COLD;
|
|
break;
|
|
case 0x2: /* TS1 Hot */
|
|
case 0x4: /* TS2 Hot */
|
|
case 0x6: /* Both Hot */
|
|
health = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
break;
|
|
default:
|
|
health = POWER_SUPPLY_HEALTH_UNKNOWN;
|
|
}
|
|
}
|
|
|
|
val->intval = health;
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_battery_get_online(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
u8 batfet_disable;
|
|
int ret;
|
|
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
|
|
BQ24190_REG_MOC_BATFET_DISABLE_MASK,
|
|
BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = !batfet_disable;
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val)
|
|
{
|
|
return bq24190_write_mask(bdi, BQ24190_REG_MOC,
|
|
BQ24190_REG_MOC_BATFET_DISABLE_MASK,
|
|
BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval);
|
|
}
|
|
|
|
static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
|
|
union power_supply_propval *val)
|
|
{
|
|
int temp, ret;
|
|
|
|
ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC,
|
|
BQ24190_REG_ICTRC_TREG_MASK,
|
|
BQ24190_REG_ICTRC_TREG_SHIFT,
|
|
bq24190_ictrc_treg_values,
|
|
ARRAY_SIZE(bq24190_ictrc_treg_values), &temp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = temp;
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
|
|
const union power_supply_propval *val)
|
|
{
|
|
return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC,
|
|
BQ24190_REG_ICTRC_TREG_MASK,
|
|
BQ24190_REG_ICTRC_TREG_SHIFT,
|
|
bq24190_ictrc_treg_values,
|
|
ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval);
|
|
}
|
|
|
|
static int bq24190_battery_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp, union power_supply_propval *val)
|
|
{
|
|
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
|
|
int ret;
|
|
|
|
dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
|
|
dev_dbg(bdi->dev, "prop: %d\n", psp);
|
|
|
|
ret = pm_runtime_get_sync(bdi->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
return ret;
|
|
}
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
ret = bq24190_battery_get_status(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
ret = bq24190_battery_get_health(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
ret = bq24190_battery_get_online(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_TECHNOLOGY:
|
|
/* Could be Li-on or Li-polymer but no way to tell which */
|
|
val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
|
|
ret = 0;
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
|
|
ret = bq24190_battery_get_temp_alert_max(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_SCOPE:
|
|
val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
ret = -ENODATA;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bq24190_battery_set_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
const union power_supply_propval *val)
|
|
{
|
|
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
|
|
int ret;
|
|
|
|
dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
|
|
dev_dbg(bdi->dev, "prop: %d\n", psp);
|
|
|
|
ret = pm_runtime_get_sync(bdi->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
return ret;
|
|
}
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
ret = bq24190_battery_set_online(bdi, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
|
|
ret = bq24190_battery_set_temp_alert_max(bdi, val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bq24190_battery_property_is_writeable(struct power_supply *psy,
|
|
enum power_supply_property psp)
|
|
{
|
|
int ret;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
|
|
ret = 1;
|
|
break;
|
|
default:
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum power_supply_property bq24190_battery_properties[] = {
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_TECHNOLOGY,
|
|
POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
|
|
POWER_SUPPLY_PROP_SCOPE,
|
|
};
|
|
|
|
static const struct power_supply_desc bq24190_battery_desc = {
|
|
.name = "bq24190-battery",
|
|
.type = POWER_SUPPLY_TYPE_BATTERY,
|
|
.properties = bq24190_battery_properties,
|
|
.num_properties = ARRAY_SIZE(bq24190_battery_properties),
|
|
.get_property = bq24190_battery_get_property,
|
|
.set_property = bq24190_battery_set_property,
|
|
.property_is_writeable = bq24190_battery_property_is_writeable,
|
|
};
|
|
|
|
static int bq24190_configure_usb_otg(struct bq24190_dev_info *bdi, u8 ss_reg)
|
|
{
|
|
bool otg_enabled;
|
|
int ret;
|
|
|
|
otg_enabled = !!(ss_reg & BQ24190_REG_SS_VBUS_STAT_MASK);
|
|
ret = extcon_set_state_sync(bdi->edev, EXTCON_USB, otg_enabled);
|
|
if (ret < 0)
|
|
dev_err(bdi->dev, "Can't set extcon state to %d: %d\n",
|
|
otg_enabled, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void bq24190_check_status(struct bq24190_dev_info *bdi)
|
|
{
|
|
const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK;
|
|
const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK
|
|
| BQ24190_REG_F_NTC_FAULT_MASK;
|
|
bool alert_charger = false, alert_battery = false;
|
|
u8 ss_reg = 0, f_reg = 0;
|
|
int i, ret;
|
|
|
|
ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
|
|
if (ret < 0) {
|
|
dev_err(bdi->dev, "Can't read SS reg: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
i = 0;
|
|
do {
|
|
ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
|
|
if (ret < 0) {
|
|
dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
|
|
return;
|
|
}
|
|
} while (f_reg && ++i < 2);
|
|
|
|
/* ignore over/under voltage fault after disconnect */
|
|
if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) &&
|
|
!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK))
|
|
f_reg = 0;
|
|
|
|
if (f_reg != bdi->f_reg) {
|
|
dev_warn(bdi->dev,
|
|
"Fault: boost %d, charge %d, battery %d, ntc %d\n",
|
|
!!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK),
|
|
!!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK),
|
|
!!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK),
|
|
!!(f_reg & BQ24190_REG_F_NTC_FAULT_MASK));
|
|
|
|
mutex_lock(&bdi->f_reg_lock);
|
|
if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f))
|
|
alert_battery = true;
|
|
if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f))
|
|
alert_charger = true;
|
|
bdi->f_reg = f_reg;
|
|
mutex_unlock(&bdi->f_reg_lock);
|
|
}
|
|
|
|
if (ss_reg != bdi->ss_reg) {
|
|
/*
|
|
* The device is in host mode so when PG_STAT goes from 1->0
|
|
* (i.e., power removed) HIZ needs to be disabled.
|
|
*/
|
|
if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
|
|
!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
|
|
ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
|
|
BQ24190_REG_ISC_EN_HIZ_MASK,
|
|
BQ24190_REG_ISC_EN_HIZ_SHIFT,
|
|
0);
|
|
if (ret < 0)
|
|
dev_err(bdi->dev, "Can't access ISC reg: %d\n",
|
|
ret);
|
|
}
|
|
|
|
if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
|
|
alert_battery = true;
|
|
if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
|
|
alert_charger = true;
|
|
bdi->ss_reg = ss_reg;
|
|
}
|
|
|
|
if (alert_charger || alert_battery) {
|
|
power_supply_changed(bdi->charger);
|
|
bq24190_configure_usb_otg(bdi, ss_reg);
|
|
}
|
|
if (alert_battery && bdi->battery)
|
|
power_supply_changed(bdi->battery);
|
|
|
|
dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg);
|
|
}
|
|
|
|
static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
|
|
{
|
|
struct bq24190_dev_info *bdi = data;
|
|
int error;
|
|
|
|
bdi->irq_event = true;
|
|
error = pm_runtime_get_sync(bdi->dev);
|
|
if (error < 0) {
|
|
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
return IRQ_NONE;
|
|
}
|
|
bq24190_check_status(bdi);
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
bdi->irq_event = false;
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int bq24190_hw_init(struct bq24190_dev_info *bdi)
|
|
{
|
|
u8 v;
|
|
int ret;
|
|
|
|
/* First check that the device really is what its supposed to be */
|
|
ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS,
|
|
BQ24190_REG_VPRS_PN_MASK,
|
|
BQ24190_REG_VPRS_PN_SHIFT,
|
|
&v);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (v) {
|
|
case BQ24190_REG_VPRS_PN_24190:
|
|
case BQ24190_REG_VPRS_PN_24192:
|
|
case BQ24190_REG_VPRS_PN_24192I:
|
|
break;
|
|
default:
|
|
dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = bq24190_register_reset(bdi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = bq24190_set_config(bdi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
|
|
}
|
|
|
|
static int bq24190_get_config(struct bq24190_dev_info *bdi)
|
|
{
|
|
const char * const s = "ti,system-minimum-microvolt";
|
|
struct power_supply_battery_info info = {};
|
|
int v;
|
|
|
|
if (device_property_read_u32(bdi->dev, s, &v) == 0) {
|
|
v /= 1000;
|
|
if (v >= BQ24190_REG_POC_SYS_MIN_MIN
|
|
&& v <= BQ24190_REG_POC_SYS_MIN_MAX)
|
|
bdi->sys_min = v;
|
|
else
|
|
dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v);
|
|
}
|
|
|
|
if (bdi->dev->of_node &&
|
|
!power_supply_get_battery_info(bdi->charger, &info)) {
|
|
v = info.precharge_current_ua / 1000;
|
|
if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN
|
|
&& v <= BQ24190_REG_PCTCC_IPRECHG_MAX)
|
|
bdi->iprechg = v;
|
|
else
|
|
dev_warn(bdi->dev, "invalid value for battery:precharge-current-microamp: %d\n",
|
|
v);
|
|
|
|
v = info.charge_term_current_ua / 1000;
|
|
if (v >= BQ24190_REG_PCTCC_ITERM_MIN
|
|
&& v <= BQ24190_REG_PCTCC_ITERM_MAX)
|
|
bdi->iterm = v;
|
|
else
|
|
dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n",
|
|
v);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24190_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
struct device *dev = &client->dev;
|
|
struct power_supply_config charger_cfg = {}, battery_cfg = {};
|
|
struct bq24190_dev_info *bdi;
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
|
|
dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
|
|
if (!bdi) {
|
|
dev_err(dev, "Can't alloc bdi struct\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
bdi->client = client;
|
|
bdi->dev = dev;
|
|
strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
|
|
mutex_init(&bdi->f_reg_lock);
|
|
bdi->f_reg = 0;
|
|
bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
|
|
INIT_DELAYED_WORK(&bdi->input_current_limit_work,
|
|
bq24190_input_current_limit_work);
|
|
|
|
i2c_set_clientdata(client, bdi);
|
|
|
|
if (client->irq <= 0) {
|
|
dev_err(dev, "Can't get irq info\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
bdi->edev = devm_extcon_dev_allocate(dev, bq24190_usb_extcon_cable);
|
|
if (IS_ERR(bdi->edev))
|
|
return PTR_ERR(bdi->edev);
|
|
|
|
ret = devm_extcon_dev_register(dev, bdi->edev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_use_autosuspend(dev);
|
|
pm_runtime_set_autosuspend_delay(dev, 600);
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret < 0) {
|
|
dev_err(dev, "pm_runtime_get failed: %i\n", ret);
|
|
goto out_pmrt;
|
|
}
|
|
|
|
#ifdef CONFIG_SYSFS
|
|
bq24190_sysfs_init_attrs();
|
|
charger_cfg.attr_grp = bq24190_sysfs_groups;
|
|
#endif
|
|
|
|
charger_cfg.drv_data = bdi;
|
|
charger_cfg.of_node = dev->of_node;
|
|
charger_cfg.supplied_to = bq24190_charger_supplied_to;
|
|
charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to);
|
|
bdi->charger = power_supply_register(dev, &bq24190_charger_desc,
|
|
&charger_cfg);
|
|
if (IS_ERR(bdi->charger)) {
|
|
dev_err(dev, "Can't register charger\n");
|
|
ret = PTR_ERR(bdi->charger);
|
|
goto out_pmrt;
|
|
}
|
|
|
|
/* the battery class is deprecated and will be removed. */
|
|
/* in the interim, this property hides it. */
|
|
if (!device_property_read_bool(dev, "omit-battery-class")) {
|
|
battery_cfg.drv_data = bdi;
|
|
bdi->battery = power_supply_register(dev, &bq24190_battery_desc,
|
|
&battery_cfg);
|
|
if (IS_ERR(bdi->battery)) {
|
|
dev_err(dev, "Can't register battery\n");
|
|
ret = PTR_ERR(bdi->battery);
|
|
goto out_charger;
|
|
}
|
|
}
|
|
|
|
ret = bq24190_get_config(bdi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Can't get devicetree config\n");
|
|
goto out_charger;
|
|
}
|
|
|
|
ret = bq24190_hw_init(bdi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Hardware init failed\n");
|
|
goto out_charger;
|
|
}
|
|
|
|
ret = bq24190_configure_usb_otg(bdi, bdi->ss_reg);
|
|
if (ret < 0)
|
|
goto out_charger;
|
|
|
|
bdi->initialized = true;
|
|
|
|
ret = devm_request_threaded_irq(dev, client->irq, NULL,
|
|
bq24190_irq_handler_thread,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
"bq24190-charger", bdi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Can't set up irq handler\n");
|
|
goto out_charger;
|
|
}
|
|
|
|
ret = bq24190_register_vbus_regulator(bdi);
|
|
if (ret < 0)
|
|
goto out_charger;
|
|
|
|
enable_irq_wake(client->irq);
|
|
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
|
|
return 0;
|
|
|
|
out_charger:
|
|
if (!IS_ERR_OR_NULL(bdi->battery))
|
|
power_supply_unregister(bdi->battery);
|
|
power_supply_unregister(bdi->charger);
|
|
|
|
out_pmrt:
|
|
pm_runtime_put_sync(dev);
|
|
pm_runtime_dont_use_autosuspend(dev);
|
|
pm_runtime_disable(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int bq24190_remove(struct i2c_client *client)
|
|
{
|
|
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
|
|
int error;
|
|
|
|
error = pm_runtime_get_sync(bdi->dev);
|
|
if (error < 0) {
|
|
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
}
|
|
|
|
bq24190_register_reset(bdi);
|
|
if (bdi->battery)
|
|
power_supply_unregister(bdi->battery);
|
|
power_supply_unregister(bdi->charger);
|
|
if (error >= 0)
|
|
pm_runtime_put_sync(bdi->dev);
|
|
pm_runtime_dont_use_autosuspend(bdi->dev);
|
|
pm_runtime_disable(bdi->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __maybe_unused int bq24190_runtime_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
|
|
|
|
if (!bdi->initialized)
|
|
return 0;
|
|
|
|
dev_dbg(bdi->dev, "%s\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __maybe_unused int bq24190_runtime_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
|
|
|
|
if (!bdi->initialized)
|
|
return 0;
|
|
|
|
if (!bdi->irq_event) {
|
|
dev_dbg(bdi->dev, "checking events on possible wakeirq\n");
|
|
bq24190_check_status(bdi);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __maybe_unused int bq24190_pm_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
|
|
int error;
|
|
|
|
error = pm_runtime_get_sync(bdi->dev);
|
|
if (error < 0) {
|
|
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
}
|
|
|
|
bq24190_register_reset(bdi);
|
|
|
|
if (error >= 0) {
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __maybe_unused int bq24190_pm_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
|
|
int error;
|
|
|
|
bdi->f_reg = 0;
|
|
bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
|
|
|
|
error = pm_runtime_get_sync(bdi->dev);
|
|
if (error < 0) {
|
|
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
|
|
pm_runtime_put_noidle(bdi->dev);
|
|
}
|
|
|
|
bq24190_register_reset(bdi);
|
|
bq24190_set_config(bdi);
|
|
bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
|
|
|
|
if (error >= 0) {
|
|
pm_runtime_mark_last_busy(bdi->dev);
|
|
pm_runtime_put_autosuspend(bdi->dev);
|
|
}
|
|
|
|
/* Things may have changed while suspended so alert upper layer */
|
|
power_supply_changed(bdi->charger);
|
|
if (bdi->battery)
|
|
power_supply_changed(bdi->battery);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops bq24190_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(bq24190_runtime_suspend, bq24190_runtime_resume,
|
|
NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(bq24190_pm_suspend, bq24190_pm_resume)
|
|
};
|
|
|
|
static const struct i2c_device_id bq24190_i2c_ids[] = {
|
|
{ "bq24190" },
|
|
{ "bq24192" },
|
|
{ "bq24192i" },
|
|
{ "bq24196" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
|
|
|
|
static const struct of_device_id bq24190_of_match[] = {
|
|
{ .compatible = "ti,bq24190", },
|
|
{ .compatible = "ti,bq24192", },
|
|
{ .compatible = "ti,bq24192i", },
|
|
{ .compatible = "ti,bq24196", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bq24190_of_match);
|
|
|
|
static struct i2c_driver bq24190_driver = {
|
|
.probe = bq24190_probe,
|
|
.remove = bq24190_remove,
|
|
.id_table = bq24190_i2c_ids,
|
|
.driver = {
|
|
.name = "bq24190-charger",
|
|
.pm = &bq24190_pm_ops,
|
|
.of_match_table = bq24190_of_match,
|
|
},
|
|
};
|
|
module_i2c_driver(bq24190_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
|
|
MODULE_DESCRIPTION("TI BQ24190 Charger Driver");
|