mirror of
https://github.com/torvalds/linux.git
synced 2024-12-02 00:51:44 +00:00
ba2a2c378a
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240502074722.1103986-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
610 lines
15 KiB
C
610 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
//
|
|
// rt1019.c -- RT1019 ALSA SoC audio amplifier driver
|
|
// Author: Jack Yu <jack.yu@realtek.com>
|
|
//
|
|
// Copyright(c) 2021 Realtek Semiconductor Corp.
|
|
//
|
|
//
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/firmware.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "rl6231.h"
|
|
#include "rt1019.h"
|
|
|
|
static const struct reg_default rt1019_reg[] = {
|
|
{ 0x0000, 0x00 },
|
|
{ 0x0011, 0x04 },
|
|
{ 0x0013, 0x00 },
|
|
{ 0x0019, 0x30 },
|
|
{ 0x001b, 0x01 },
|
|
{ 0x005c, 0x00 },
|
|
{ 0x005e, 0x10 },
|
|
{ 0x005f, 0xec },
|
|
{ 0x0061, 0x10 },
|
|
{ 0x0062, 0x19 },
|
|
{ 0x0066, 0x08 },
|
|
{ 0x0100, 0x80 },
|
|
{ 0x0100, 0x51 },
|
|
{ 0x0102, 0x23 },
|
|
{ 0x0311, 0x00 },
|
|
{ 0x0312, 0x3e },
|
|
{ 0x0313, 0x86 },
|
|
{ 0x0400, 0x03 },
|
|
{ 0x0401, 0x02 },
|
|
{ 0x0402, 0x01 },
|
|
{ 0x0504, 0xff },
|
|
{ 0x0505, 0x24 },
|
|
{ 0x0b00, 0x50 },
|
|
{ 0x0b01, 0xc3 },
|
|
};
|
|
|
|
static bool rt1019_volatile_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case RT1019_PWR_STRP_2:
|
|
case RT1019_VER_ID:
|
|
case RT1019_VEND_ID_1:
|
|
case RT1019_VEND_ID_2:
|
|
case RT1019_DEV_ID_1:
|
|
case RT1019_DEV_ID_2:
|
|
return true;
|
|
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool rt1019_readable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case RT1019_RESET:
|
|
case RT1019_IDS_CTRL:
|
|
case RT1019_ASEL_CTRL:
|
|
case RT1019_PWR_STRP_2:
|
|
case RT1019_BEEP_TONE:
|
|
case RT1019_VER_ID:
|
|
case RT1019_VEND_ID_1:
|
|
case RT1019_VEND_ID_2:
|
|
case RT1019_DEV_ID_1:
|
|
case RT1019_DEV_ID_2:
|
|
case RT1019_SDB_CTRL:
|
|
case RT1019_CLK_TREE_1:
|
|
case RT1019_CLK_TREE_2:
|
|
case RT1019_CLK_TREE_3:
|
|
case RT1019_PLL_1:
|
|
case RT1019_PLL_2:
|
|
case RT1019_PLL_3:
|
|
case RT1019_TDM_1:
|
|
case RT1019_TDM_2:
|
|
case RT1019_TDM_3:
|
|
case RT1019_DMIX_MONO_1:
|
|
case RT1019_DMIX_MONO_2:
|
|
case RT1019_BEEP_1:
|
|
case RT1019_BEEP_2:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -9525, 75, 0);
|
|
|
|
static const char * const rt1019_din_source_select[] = {
|
|
"Left",
|
|
"Right",
|
|
"Left + Right average",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(rt1019_mono_lr_sel, RT1019_IDS_CTRL, 0,
|
|
rt1019_din_source_select);
|
|
|
|
static const struct snd_kcontrol_new rt1019_snd_controls[] = {
|
|
SOC_SINGLE_TLV("DAC Playback Volume", RT1019_DMIX_MONO_1, 0,
|
|
127, 0, dac_vol_tlv),
|
|
SOC_ENUM("Mono LR Select", rt1019_mono_lr_sel),
|
|
};
|
|
|
|
static int r1019_dac_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
snd_soc_component_write(component, RT1019_SDB_CTRL, 0xb);
|
|
break;
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
snd_soc_component_write(component, RT1019_SDB_CTRL, 0xa);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dapm_widget rt1019_dapm_widgets[] = {
|
|
SND_SOC_DAPM_AIF_IN("AIFRX", "AIF Playback", 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0,
|
|
r1019_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
SND_SOC_DAPM_OUTPUT("SPO"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route rt1019_dapm_routes[] = {
|
|
{ "DAC", NULL, "AIFRX" },
|
|
{ "SPO", NULL, "DAC" },
|
|
};
|
|
|
|
static int rt1019_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct rt1019_priv *rt1019 = snd_soc_component_get_drvdata(component);
|
|
int pre_div, bclk_ms, frame_size;
|
|
unsigned int val_len = 0, sys_div_da_filter = 0;
|
|
unsigned int sys_dac_osr = 0, sys_fifo_clk = 0;
|
|
unsigned int sys_clk_cal = 0, sys_asrc_in = 0;
|
|
|
|
rt1019->lrck = params_rate(params);
|
|
pre_div = rl6231_get_clk_info(rt1019->sysclk, rt1019->lrck);
|
|
if (pre_div < 0) {
|
|
dev_err(component->dev, "Unsupported clock setting\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
frame_size = snd_soc_params_to_frame_size(params);
|
|
if (frame_size < 0) {
|
|
dev_err(component->dev, "Unsupported frame size: %d\n", frame_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
bclk_ms = frame_size > 32;
|
|
rt1019->bclk = rt1019->lrck * (32 << bclk_ms);
|
|
|
|
dev_dbg(dai->dev, "bclk is %dHz and lrck is %dHz\n",
|
|
rt1019->bclk, rt1019->lrck);
|
|
dev_dbg(dai->dev, "bclk_ms is %d and pre_div is %d for iis %d\n",
|
|
bclk_ms, pre_div, dai->id);
|
|
|
|
switch (pre_div) {
|
|
case 0:
|
|
sys_div_da_filter = RT1019_SYS_DIV_DA_FIL_DIV1;
|
|
sys_dac_osr = RT1019_SYS_DA_OSR_DIV1;
|
|
sys_asrc_in = RT1019_ASRC_256FS_DIV1;
|
|
sys_fifo_clk = RT1019_SEL_FIFO_DIV1;
|
|
sys_clk_cal = RT1019_SEL_CLK_CAL_DIV1;
|
|
break;
|
|
case 1:
|
|
sys_div_da_filter = RT1019_SYS_DIV_DA_FIL_DIV2;
|
|
sys_dac_osr = RT1019_SYS_DA_OSR_DIV2;
|
|
sys_asrc_in = RT1019_ASRC_256FS_DIV2;
|
|
sys_fifo_clk = RT1019_SEL_FIFO_DIV2;
|
|
sys_clk_cal = RT1019_SEL_CLK_CAL_DIV2;
|
|
break;
|
|
case 3:
|
|
sys_div_da_filter = RT1019_SYS_DIV_DA_FIL_DIV4;
|
|
sys_dac_osr = RT1019_SYS_DA_OSR_DIV4;
|
|
sys_asrc_in = RT1019_ASRC_256FS_DIV4;
|
|
sys_fifo_clk = RT1019_SEL_FIFO_DIV4;
|
|
sys_clk_cal = RT1019_SEL_CLK_CAL_DIV4;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (params_width(params)) {
|
|
case 16:
|
|
break;
|
|
case 20:
|
|
val_len = RT1019_I2S_DL_20;
|
|
break;
|
|
case 24:
|
|
val_len = RT1019_I2S_DL_24;
|
|
break;
|
|
case 32:
|
|
val_len = RT1019_I2S_DL_32;
|
|
break;
|
|
case 8:
|
|
val_len = RT1019_I2S_DL_8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_component_update_bits(component, RT1019_TDM_2, RT1019_I2S_DL_MASK,
|
|
val_len);
|
|
snd_soc_component_update_bits(component, RT1019_CLK_TREE_1,
|
|
RT1019_SEL_FIFO_MASK, sys_fifo_clk);
|
|
snd_soc_component_update_bits(component, RT1019_CLK_TREE_2,
|
|
RT1019_SYS_DIV_DA_FIL_MASK | RT1019_SYS_DA_OSR_MASK |
|
|
RT1019_ASRC_256FS_MASK, sys_div_da_filter | sys_dac_osr |
|
|
sys_asrc_in);
|
|
snd_soc_component_update_bits(component, RT1019_CLK_TREE_3,
|
|
RT1019_SEL_CLK_CAL_MASK, sys_clk_cal);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt1019_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
unsigned int reg_val = 0, reg_val2 = 0;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
reg_val2 |= RT1019_TDM_BCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
reg_val |= RT1019_I2S_DF_LEFT;
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
reg_val |= RT1019_I2S_DF_PCM_A_R;
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
reg_val |= RT1019_I2S_DF_PCM_B_R;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_component_update_bits(component, RT1019_TDM_2,
|
|
RT1019_I2S_DF_MASK, reg_val);
|
|
snd_soc_component_update_bits(component, RT1019_TDM_1,
|
|
RT1019_TDM_BCLK_MASK, reg_val2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt1019_set_dai_sysclk(struct snd_soc_dai *dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct rt1019_priv *rt1019 = snd_soc_component_get_drvdata(component);
|
|
unsigned int reg_val = 0;
|
|
|
|
if (freq == rt1019->sysclk && clk_id == rt1019->sysclk_src)
|
|
return 0;
|
|
|
|
switch (clk_id) {
|
|
case RT1019_SCLK_S_BCLK:
|
|
reg_val |= RT1019_CLK_SYS_PRE_SEL_BCLK;
|
|
break;
|
|
|
|
case RT1019_SCLK_S_PLL:
|
|
reg_val |= RT1019_CLK_SYS_PRE_SEL_PLL;
|
|
break;
|
|
|
|
default:
|
|
dev_err(component->dev, "Invalid clock id (%d)\n", clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rt1019->sysclk = freq;
|
|
rt1019->sysclk_src = clk_id;
|
|
|
|
dev_dbg(dai->dev, "Sysclk is %dHz and clock id is %d\n", freq, clk_id);
|
|
|
|
snd_soc_component_update_bits(component, RT1019_CLK_TREE_1,
|
|
RT1019_CLK_SYS_PRE_SEL_MASK, reg_val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt1019_set_dai_pll(struct snd_soc_dai *dai, int pll_id, int source,
|
|
unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct rt1019_priv *rt1019 = snd_soc_component_get_drvdata(component);
|
|
struct rl6231_pll_code pll_code;
|
|
int ret;
|
|
|
|
if (!freq_in || !freq_out) {
|
|
dev_dbg(component->dev, "PLL disabled\n");
|
|
rt1019->pll_in = 0;
|
|
rt1019->pll_out = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (source == rt1019->pll_src && freq_in == rt1019->pll_in &&
|
|
freq_out == rt1019->pll_out)
|
|
return 0;
|
|
|
|
switch (source) {
|
|
case RT1019_PLL_S_BCLK:
|
|
snd_soc_component_update_bits(component, RT1019_CLK_TREE_1,
|
|
RT1019_PLL_SRC_MASK, RT1019_PLL_SRC_SEL_BCLK);
|
|
break;
|
|
|
|
case RT1019_PLL_S_RC25M:
|
|
snd_soc_component_update_bits(component, RT1019_CLK_TREE_1,
|
|
RT1019_PLL_SRC_MASK, RT1019_PLL_SRC_SEL_RC);
|
|
break;
|
|
|
|
default:
|
|
dev_err(component->dev, "Unknown PLL source %d\n", source);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
|
|
if (ret < 0) {
|
|
dev_err(component->dev, "Unsupported input clock %d\n", freq_in);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
|
|
pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
|
|
pll_code.n_code, pll_code.k_code);
|
|
|
|
snd_soc_component_update_bits(component, RT1019_PWR_STRP_2,
|
|
RT1019_AUTO_BITS_SEL_MASK | RT1019_AUTO_CLK_SEL_MASK,
|
|
RT1019_AUTO_BITS_SEL_MANU | RT1019_AUTO_CLK_SEL_MANU);
|
|
snd_soc_component_update_bits(component, RT1019_PLL_1,
|
|
RT1019_PLL_M_MASK | RT1019_PLL_M_BP_MASK | RT1019_PLL_Q_8_8_MASK,
|
|
((pll_code.m_bp ? 0 : pll_code.m_code) << RT1019_PLL_M_SFT) |
|
|
(pll_code.m_bp << RT1019_PLL_M_BP_SFT) |
|
|
((pll_code.n_code >> 8) & RT1019_PLL_Q_8_8_MASK));
|
|
snd_soc_component_update_bits(component, RT1019_PLL_2,
|
|
RT1019_PLL_Q_7_0_MASK, pll_code.n_code & RT1019_PLL_Q_7_0_MASK);
|
|
snd_soc_component_update_bits(component, RT1019_PLL_3,
|
|
RT1019_PLL_K_MASK, pll_code.k_code);
|
|
|
|
rt1019->pll_in = freq_in;
|
|
rt1019->pll_out = freq_out;
|
|
rt1019->pll_src = source;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt1019_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
|
|
unsigned int rx_mask, int slots, int slot_width)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
unsigned int cn = 0, cl = 0, rx_slotnum;
|
|
int ret = 0, first_bit;
|
|
|
|
switch (slots) {
|
|
case 4:
|
|
cn = RT1019_I2S_TX_4CH;
|
|
break;
|
|
case 6:
|
|
cn = RT1019_I2S_TX_6CH;
|
|
break;
|
|
case 8:
|
|
cn = RT1019_I2S_TX_8CH;
|
|
break;
|
|
case 2:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (slot_width) {
|
|
case 20:
|
|
cl = RT1019_TDM_CL_20;
|
|
break;
|
|
case 24:
|
|
cl = RT1019_TDM_CL_24;
|
|
break;
|
|
case 32:
|
|
cl = RT1019_TDM_CL_32;
|
|
break;
|
|
case 8:
|
|
cl = RT1019_TDM_CL_8;
|
|
break;
|
|
case 16:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Rx slot configuration */
|
|
rx_slotnum = hweight_long(rx_mask);
|
|
if (rx_slotnum != 1) {
|
|
ret = -EINVAL;
|
|
dev_err(component->dev, "too many rx slots or zero slot\n");
|
|
goto _set_tdm_err_;
|
|
}
|
|
/* This is an assumption that the system sends stereo audio to the
|
|
* amplifier typically. And the stereo audio is placed in slot 0/2/4/6
|
|
* as the starting slot. The users could select the channel from
|
|
* L/R/L+R by "Mono LR Select" control.
|
|
*/
|
|
first_bit = __ffs(rx_mask);
|
|
switch (first_bit) {
|
|
case 0:
|
|
case 2:
|
|
case 4:
|
|
case 6:
|
|
snd_soc_component_update_bits(component,
|
|
RT1019_TDM_3,
|
|
RT1019_TDM_I2S_TX_L_DAC1_1_MASK |
|
|
RT1019_TDM_I2S_TX_R_DAC1_1_MASK,
|
|
(first_bit << RT1019_TDM_I2S_TX_L_DAC1_1_SFT) |
|
|
((first_bit + 1) << RT1019_TDM_I2S_TX_R_DAC1_1_SFT));
|
|
break;
|
|
case 1:
|
|
case 3:
|
|
case 5:
|
|
case 7:
|
|
snd_soc_component_update_bits(component,
|
|
RT1019_TDM_3,
|
|
RT1019_TDM_I2S_TX_L_DAC1_1_MASK |
|
|
RT1019_TDM_I2S_TX_R_DAC1_1_MASK,
|
|
((first_bit - 1) << RT1019_TDM_I2S_TX_L_DAC1_1_SFT) |
|
|
(first_bit << RT1019_TDM_I2S_TX_R_DAC1_1_SFT));
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto _set_tdm_err_;
|
|
}
|
|
|
|
snd_soc_component_update_bits(component, RT1019_TDM_1,
|
|
RT1019_TDM_CL_MASK, cl);
|
|
snd_soc_component_update_bits(component, RT1019_TDM_2,
|
|
RT1019_I2S_CH_TX_MASK, cn);
|
|
|
|
_set_tdm_err_:
|
|
return ret;
|
|
}
|
|
|
|
static int rt1019_probe(struct snd_soc_component *component)
|
|
{
|
|
struct rt1019_priv *rt1019 = snd_soc_component_get_drvdata(component);
|
|
|
|
rt1019->component = component;
|
|
snd_soc_component_write(component, RT1019_SDB_CTRL, 0xa);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define RT1019_STEREO_RATES SNDRV_PCM_RATE_8000_192000
|
|
#define RT1019_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8)
|
|
|
|
static const struct snd_soc_dai_ops rt1019_aif_dai_ops = {
|
|
.hw_params = rt1019_hw_params,
|
|
.set_fmt = rt1019_set_dai_fmt,
|
|
.set_sysclk = rt1019_set_dai_sysclk,
|
|
.set_pll = rt1019_set_dai_pll,
|
|
.set_tdm_slot = rt1019_set_tdm_slot,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver rt1019_dai[] = {
|
|
{
|
|
.name = "rt1019-aif",
|
|
.id = 0,
|
|
.playback = {
|
|
.stream_name = "AIF Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = RT1019_STEREO_RATES,
|
|
.formats = RT1019_FORMATS,
|
|
},
|
|
.ops = &rt1019_aif_dai_ops,
|
|
}
|
|
};
|
|
|
|
static const struct snd_soc_component_driver soc_component_dev_rt1019 = {
|
|
.probe = rt1019_probe,
|
|
.controls = rt1019_snd_controls,
|
|
.num_controls = ARRAY_SIZE(rt1019_snd_controls),
|
|
.dapm_widgets = rt1019_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(rt1019_dapm_widgets),
|
|
.dapm_routes = rt1019_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(rt1019_dapm_routes),
|
|
.endianness = 1,
|
|
};
|
|
|
|
static const struct regmap_config rt1019_regmap = {
|
|
.reg_bits = 16,
|
|
.val_bits = 8,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
.max_register = RT1019_BEEP_2,
|
|
.volatile_reg = rt1019_volatile_register,
|
|
.readable_reg = rt1019_readable_register,
|
|
.cache_type = REGCACHE_MAPLE,
|
|
.reg_defaults = rt1019_reg,
|
|
.num_reg_defaults = ARRAY_SIZE(rt1019_reg),
|
|
};
|
|
|
|
static const struct i2c_device_id rt1019_i2c_id[] = {
|
|
{ "rt1019" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, rt1019_i2c_id);
|
|
|
|
static const struct of_device_id rt1019_of_match[] __maybe_unused = {
|
|
{ .compatible = "realtek,rt1019", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rt1019_of_match);
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id rt1019_acpi_match[] = {
|
|
{ "10EC1019", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, rt1019_acpi_match);
|
|
#endif
|
|
|
|
static int rt1019_i2c_probe(struct i2c_client *i2c)
|
|
{
|
|
struct rt1019_priv *rt1019;
|
|
int ret;
|
|
unsigned int val, val2, dev_id;
|
|
|
|
rt1019 = devm_kzalloc(&i2c->dev, sizeof(struct rt1019_priv),
|
|
GFP_KERNEL);
|
|
if (!rt1019)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, rt1019);
|
|
|
|
rt1019->regmap = devm_regmap_init_i2c(i2c, &rt1019_regmap);
|
|
if (IS_ERR(rt1019->regmap)) {
|
|
ret = PTR_ERR(rt1019->regmap);
|
|
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
regmap_read(rt1019->regmap, RT1019_DEV_ID_1, &val);
|
|
regmap_read(rt1019->regmap, RT1019_DEV_ID_2, &val2);
|
|
dev_id = val << 8 | val2;
|
|
if (dev_id != RT1019_DEVICE_ID_VAL && dev_id != RT1019_DEVICE_ID_VAL2) {
|
|
dev_err(&i2c->dev,
|
|
"Device with ID register 0x%x is not rt1019\n", dev_id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return devm_snd_soc_register_component(&i2c->dev,
|
|
&soc_component_dev_rt1019, rt1019_dai, ARRAY_SIZE(rt1019_dai));
|
|
}
|
|
|
|
static struct i2c_driver rt1019_i2c_driver = {
|
|
.driver = {
|
|
.name = "rt1019",
|
|
.of_match_table = of_match_ptr(rt1019_of_match),
|
|
.acpi_match_table = ACPI_PTR(rt1019_acpi_match),
|
|
},
|
|
.probe = rt1019_i2c_probe,
|
|
.id_table = rt1019_i2c_id,
|
|
};
|
|
module_i2c_driver(rt1019_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC RT1019 driver");
|
|
MODULE_AUTHOR("Jack Yu <jack.yu@realtek.com>");
|
|
MODULE_LICENSE("GPL v2");
|