linux/arch/openrisc/mm/fault.c
Peter Xu dde1607248 mm: introduce FAULT_FLAG_DEFAULT
Although there're tons of arch-specific page fault handlers, most of them
are still sharing the same initial value of the page fault flags.  Say,
merely all of the page fault handlers would allow the fault to be retried,
and they also allow the fault to respond to SIGKILL.

Let's define a default value for the fault flags to replace those initial
page fault flags that were copied over.  With this, it'll be far easier to
introduce new fault flag that can be used by all the architectures instead
of touching all the archs.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160238.9694-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 09:35:29 -07:00

351 lines
8.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* OpenRISC fault.c
*
* Linux architectural port borrowing liberally from similar works of
* others. All original copyrights apply as per the original source
* declaration.
*
* Modifications for the OpenRISC architecture:
* Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
* Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
*/
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/extable.h>
#include <linux/sched/signal.h>
#include <linux/uaccess.h>
#include <asm/siginfo.h>
#include <asm/signal.h>
#define NUM_TLB_ENTRIES 64
#define TLB_OFFSET(add) (((add) >> PAGE_SHIFT) & (NUM_TLB_ENTRIES-1))
unsigned long pte_misses; /* updated by do_page_fault() */
unsigned long pte_errors; /* updated by do_page_fault() */
/* __PHX__ :: - check the vmalloc_fault in do_page_fault()
* - also look into include/asm-or32/mmu_context.h
*/
volatile pgd_t *current_pgd[NR_CPUS];
extern void die(char *, struct pt_regs *, long);
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*
* If this routine detects a bad access, it returns 1, otherwise it
* returns 0.
*/
asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
unsigned long vector, int write_acc)
{
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct *vma;
int si_code;
vm_fault_t fault;
unsigned int flags = FAULT_FLAG_DEFAULT;
tsk = current;
/*
* We fault-in kernel-space virtual memory on-demand. The
* 'reference' page table is init_mm.pgd.
*
* NOTE! We MUST NOT take any locks for this case. We may
* be in an interrupt or a critical region, and should
* only copy the information from the master page table,
* nothing more.
*
* NOTE2: This is done so that, when updating the vmalloc
* mappings we don't have to walk all processes pgdirs and
* add the high mappings all at once. Instead we do it as they
* are used. However vmalloc'ed page entries have the PAGE_GLOBAL
* bit set so sometimes the TLB can use a lingering entry.
*
* This verifies that the fault happens in kernel space
* and that the fault was not a protection error.
*/
if (address >= VMALLOC_START &&
(vector != 0x300 && vector != 0x400) &&
!user_mode(regs))
goto vmalloc_fault;
/* If exceptions were enabled, we can reenable them here */
if (user_mode(regs)) {
/* Exception was in userspace: reenable interrupts */
local_irq_enable();
flags |= FAULT_FLAG_USER;
} else {
/* If exception was in a syscall, then IRQ's may have
* been enabled or disabled. If they were enabled,
* reenable them.
*/
if (regs->sr && (SPR_SR_IEE | SPR_SR_TEE))
local_irq_enable();
}
mm = tsk->mm;
si_code = SEGV_MAPERR;
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
if (in_interrupt() || !mm)
goto no_context;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
goto bad_area;
if (vma->vm_start <= address)
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
if (user_mode(regs)) {
/*
* accessing the stack below usp is always a bug.
* we get page-aligned addresses so we can only check
* if we're within a page from usp, but that might be
* enough to catch brutal errors at least.
*/
if (address + PAGE_SIZE < regs->sp)
goto bad_area;
}
if (expand_stack(vma, address))
goto bad_area;
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
good_area:
si_code = SEGV_ACCERR;
/* first do some preliminary protection checks */
if (write_acc) {
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
flags |= FAULT_FLAG_WRITE;
} else {
/* not present */
if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
goto bad_area;
}
/* are we trying to execute nonexecutable area */
if ((vector == 0x400) && !(vma->vm_page_prot.pgprot & _PAGE_EXEC))
goto bad_area;
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(vma, address, flags);
if (fault_signal_pending(fault, regs))
return;
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
else if (fault & VM_FAULT_SIGSEGV)
goto bad_area;
else if (fault & VM_FAULT_SIGBUS)
goto do_sigbus;
BUG();
}
if (flags & FAULT_FLAG_ALLOW_RETRY) {
/*RGD modeled on Cris */
if (fault & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
flags |= FAULT_FLAG_TRIED;
/* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);
return;
/*
* Something tried to access memory that isn't in our memory map..
* Fix it, but check if it's kernel or user first..
*/
bad_area:
up_read(&mm->mmap_sem);
bad_area_nosemaphore:
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
force_sig_fault(SIGSEGV, si_code, (void __user *)address);
return;
}
no_context:
/* Are we prepared to handle this kernel fault?
*
* (The kernel has valid exception-points in the source
* when it acesses user-memory. When it fails in one
* of those points, we find it in a table and do a jump
* to some fixup code that loads an appropriate error
* code)
*/
{
const struct exception_table_entry *entry;
__asm__ __volatile__("l.nop 42");
if ((entry = search_exception_tables(regs->pc)) != NULL) {
/* Adjust the instruction pointer in the stackframe */
regs->pc = entry->fixup;
return;
}
}
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
if ((unsigned long)(address) < PAGE_SIZE)
printk(KERN_ALERT
"Unable to handle kernel NULL pointer dereference");
else
printk(KERN_ALERT "Unable to handle kernel access");
printk(" at virtual address 0x%08lx\n", address);
die("Oops", regs, write_acc);
do_exit(SIGKILL);
/*
* We ran out of memory, or some other thing happened to us that made
* us unable to handle the page fault gracefully.
*/
out_of_memory:
__asm__ __volatile__("l.nop 42");
__asm__ __volatile__("l.nop 1");
up_read(&mm->mmap_sem);
if (!user_mode(regs))
goto no_context;
pagefault_out_of_memory();
return;
do_sigbus:
up_read(&mm->mmap_sem);
/*
* Send a sigbus, regardless of whether we were in kernel
* or user mode.
*/
force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
/* Kernel mode? Handle exceptions or die */
if (!user_mode(regs))
goto no_context;
return;
vmalloc_fault:
{
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
*
* Use current_pgd instead of tsk->active_mm->pgd
* since the latter might be unavailable if this
* code is executed in a misfortunately run irq
* (like inside schedule() between switch_mm and
* switch_to...).
*/
int offset = pgd_index(address);
pgd_t *pgd, *pgd_k;
pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pte_t *pte_k;
/*
phx_warn("do_page_fault(): vmalloc_fault will not work, "
"since current_pgd assign a proper value somewhere\n"
"anyhow we don't need this at the moment\n");
phx_mmu("vmalloc_fault");
*/
pgd = (pgd_t *)current_pgd[smp_processor_id()] + offset;
pgd_k = init_mm.pgd + offset;
/* Since we're two-level, we don't need to do both
* set_pgd and set_pmd (they do the same thing). If
* we go three-level at some point, do the right thing
* with pgd_present and set_pgd here.
*
* Also, since the vmalloc area is global, we don't
* need to copy individual PTE's, it is enough to
* copy the pgd pointer into the pte page of the
* root task. If that is there, we'll find our pte if
* it exists.
*/
pud = pud_offset(pgd, address);
pud_k = pud_offset(pgd_k, address);
if (!pud_present(*pud_k))
goto no_context;
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
goto bad_area_nosemaphore;
set_pmd(pmd, *pmd_k);
/* Make sure the actual PTE exists as well to
* catch kernel vmalloc-area accesses to non-mapped
* addresses. If we don't do this, this will just
* silently loop forever.
*/
pte_k = pte_offset_kernel(pmd_k, address);
if (!pte_present(*pte_k))
goto no_context;
return;
}
}