linux/arch/blackfin/kernel/perf_event.c
Christoph Lameter 7e788ab11d blackfin: Replace __get_cpu_var uses
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e.  using a global
register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)

CC: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:55 -04:00

499 lines
12 KiB
C

/*
* Blackfin performance counters
*
* Copyright 2011 Analog Devices Inc.
*
* Ripped from SuperH version:
*
* Copyright (C) 2009 Paul Mundt
*
* Heavily based on the x86 and PowerPC implementations.
*
* x86:
* Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
* Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
* Copyright (C) 2009 Jaswinder Singh Rajput
* Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
* Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
* Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
*
* ppc:
* Copyright 2008-2009 Paul Mackerras, IBM Corporation.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/perf_event.h>
#include <asm/bfin_pfmon.h>
/*
* We have two counters, and each counter can support an event type.
* The 'o' is PFCNTx=1 and 's' is PFCNTx=0
*
* 0x04 o pc invariant branches
* 0x06 o mispredicted branches
* 0x09 o predicted branches taken
* 0x0B o EXCPT insn
* 0x0C o CSYNC/SSYNC insn
* 0x0D o Insns committed
* 0x0E o Interrupts taken
* 0x0F o Misaligned address exceptions
* 0x80 o Code memory fetches stalled due to DMA
* 0x83 o 64bit insn fetches delivered
* 0x9A o data cache fills (bank a)
* 0x9B o data cache fills (bank b)
* 0x9C o data cache lines evicted (bank a)
* 0x9D o data cache lines evicted (bank b)
* 0x9E o data cache high priority fills
* 0x9F o data cache low priority fills
* 0x00 s loop 0 iterations
* 0x01 s loop 1 iterations
* 0x0A s CSYNC/SSYNC stalls
* 0x10 s DAG read/after write hazards
* 0x13 s RAW data hazards
* 0x81 s code TAG stalls
* 0x82 s code fill stalls
* 0x90 s processor to memory stalls
* 0x91 s data memory stalls not hidden by 0x90
* 0x92 s data store buffer full stalls
* 0x93 s data memory write buffer full stalls due to high->low priority
* 0x95 s data memory fill buffer stalls
* 0x96 s data TAG collision stalls
* 0x97 s data collision stalls
* 0x98 s data stalls
* 0x99 s data stalls sent to processor
*/
static const int event_map[] = {
/* use CYCLES cpu register */
[PERF_COUNT_HW_CPU_CYCLES] = -1,
[PERF_COUNT_HW_INSTRUCTIONS] = 0x0D,
[PERF_COUNT_HW_CACHE_REFERENCES] = -1,
[PERF_COUNT_HW_CACHE_MISSES] = 0x83,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x09,
[PERF_COUNT_HW_BRANCH_MISSES] = 0x06,
[PERF_COUNT_HW_BUS_CYCLES] = -1,
};
#define C(x) PERF_COUNT_HW_CACHE_##x
static const int cache_events[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] =
{
[C(L1D)] = { /* Data bank A */
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = 0,
[C(RESULT_MISS) ] = 0x9A,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = 0,
[C(RESULT_MISS) ] = 0,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = 0,
[C(RESULT_MISS) ] = 0,
},
},
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = 0,
[C(RESULT_MISS) ] = 0x83,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = 0,
[C(RESULT_MISS) ] = 0,
},
},
[C(LL)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
},
[C(DTLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
},
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
},
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS) ] = -1,
},
},
};
const char *perf_pmu_name(void)
{
return "bfin";
}
EXPORT_SYMBOL(perf_pmu_name);
int perf_num_counters(void)
{
return ARRAY_SIZE(event_map);
}
EXPORT_SYMBOL(perf_num_counters);
static u64 bfin_pfmon_read(int idx)
{
return bfin_read32(PFCNTR0 + (idx * 4));
}
static void bfin_pfmon_disable(struct hw_perf_event *hwc, int idx)
{
bfin_write_PFCTL(bfin_read_PFCTL() & ~PFCEN(idx, PFCEN_MASK));
}
static void bfin_pfmon_enable(struct hw_perf_event *hwc, int idx)
{
u32 val, mask;
val = PFPWR;
if (idx) {
mask = ~(PFCNT1 | PFMON1 | PFCEN1 | PEMUSW1);
/* The packed config is for event0, so shift it to event1 slots */
val |= (hwc->config << (PFMON1_P - PFMON0_P));
val |= (hwc->config & PFCNT0) << (PFCNT1_P - PFCNT0_P);
bfin_write_PFCNTR1(0);
} else {
mask = ~(PFCNT0 | PFMON0 | PFCEN0 | PEMUSW0);
val |= hwc->config;
bfin_write_PFCNTR0(0);
}
bfin_write_PFCTL((bfin_read_PFCTL() & mask) | val);
}
static void bfin_pfmon_disable_all(void)
{
bfin_write_PFCTL(bfin_read_PFCTL() & ~PFPWR);
}
static void bfin_pfmon_enable_all(void)
{
bfin_write_PFCTL(bfin_read_PFCTL() | PFPWR);
}
struct cpu_hw_events {
struct perf_event *events[MAX_HWEVENTS];
unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
};
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
static int hw_perf_cache_event(int config, int *evp)
{
unsigned long type, op, result;
int ev;
/* unpack config */
type = config & 0xff;
op = (config >> 8) & 0xff;
result = (config >> 16) & 0xff;
if (type >= PERF_COUNT_HW_CACHE_MAX ||
op >= PERF_COUNT_HW_CACHE_OP_MAX ||
result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
ev = cache_events[type][op][result];
if (ev == 0)
return -EOPNOTSUPP;
if (ev == -1)
return -EINVAL;
*evp = ev;
return 0;
}
static void bfin_perf_event_update(struct perf_event *event,
struct hw_perf_event *hwc, int idx)
{
u64 prev_raw_count, new_raw_count;
s64 delta;
int shift = 0;
/*
* Depending on the counter configuration, they may or may not
* be chained, in which case the previous counter value can be
* updated underneath us if the lower-half overflows.
*
* Our tactic to handle this is to first atomically read and
* exchange a new raw count - then add that new-prev delta
* count to the generic counter atomically.
*
* As there is no interrupt associated with the overflow events,
* this is the simplest approach for maintaining consistency.
*/
again:
prev_raw_count = local64_read(&hwc->prev_count);
new_raw_count = bfin_pfmon_read(idx);
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count)
goto again;
/*
* Now we have the new raw value and have updated the prev
* timestamp already. We can now calculate the elapsed delta
* (counter-)time and add that to the generic counter.
*
* Careful, not all hw sign-extends above the physical width
* of the count.
*/
delta = (new_raw_count << shift) - (prev_raw_count << shift);
delta >>= shift;
local64_add(delta, &event->count);
}
static void bfin_pmu_stop(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
if (!(event->hw.state & PERF_HES_STOPPED)) {
bfin_pfmon_disable(hwc, idx);
cpuc->events[idx] = NULL;
event->hw.state |= PERF_HES_STOPPED;
}
if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) {
bfin_perf_event_update(event, &event->hw, idx);
event->hw.state |= PERF_HES_UPTODATE;
}
}
static void bfin_pmu_start(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
if (WARN_ON_ONCE(idx == -1))
return;
if (flags & PERF_EF_RELOAD)
WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
cpuc->events[idx] = event;
event->hw.state = 0;
bfin_pfmon_enable(hwc, idx);
}
static void bfin_pmu_del(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
bfin_pmu_stop(event, PERF_EF_UPDATE);
__clear_bit(event->hw.idx, cpuc->used_mask);
perf_event_update_userpage(event);
}
static int bfin_pmu_add(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
int ret = -EAGAIN;
perf_pmu_disable(event->pmu);
if (__test_and_set_bit(idx, cpuc->used_mask)) {
idx = find_first_zero_bit(cpuc->used_mask, MAX_HWEVENTS);
if (idx == MAX_HWEVENTS)
goto out;
__set_bit(idx, cpuc->used_mask);
hwc->idx = idx;
}
bfin_pfmon_disable(hwc, idx);
event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
if (flags & PERF_EF_START)
bfin_pmu_start(event, PERF_EF_RELOAD);
perf_event_update_userpage(event);
ret = 0;
out:
perf_pmu_enable(event->pmu);
return ret;
}
static void bfin_pmu_read(struct perf_event *event)
{
bfin_perf_event_update(event, &event->hw, event->hw.idx);
}
static int bfin_pmu_event_init(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
struct hw_perf_event *hwc = &event->hw;
int config = -1;
int ret;
if (attr->exclude_hv || attr->exclude_idle)
return -EPERM;
ret = 0;
switch (attr->type) {
case PERF_TYPE_RAW:
config = PFMON(0, attr->config & PFMON_MASK) |
PFCNT(0, !(attr->config & 0x100));
break;
case PERF_TYPE_HW_CACHE:
ret = hw_perf_cache_event(attr->config, &config);
break;
case PERF_TYPE_HARDWARE:
if (attr->config >= ARRAY_SIZE(event_map))
return -EINVAL;
config = event_map[attr->config];
break;
}
if (config == -1)
return -EINVAL;
if (!attr->exclude_kernel)
config |= PFCEN(0, PFCEN_ENABLE_SUPV);
if (!attr->exclude_user)
config |= PFCEN(0, PFCEN_ENABLE_USER);
hwc->config |= config;
return ret;
}
static void bfin_pmu_enable(struct pmu *pmu)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct perf_event *event;
struct hw_perf_event *hwc;
int i;
for (i = 0; i < MAX_HWEVENTS; ++i) {
event = cpuc->events[i];
if (!event)
continue;
hwc = &event->hw;
bfin_pfmon_enable(hwc, hwc->idx);
}
bfin_pfmon_enable_all();
}
static void bfin_pmu_disable(struct pmu *pmu)
{
bfin_pfmon_disable_all();
}
static struct pmu pmu = {
.pmu_enable = bfin_pmu_enable,
.pmu_disable = bfin_pmu_disable,
.event_init = bfin_pmu_event_init,
.add = bfin_pmu_add,
.del = bfin_pmu_del,
.start = bfin_pmu_start,
.stop = bfin_pmu_stop,
.read = bfin_pmu_read,
};
static void bfin_pmu_setup(int cpu)
{
struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
memset(cpuhw, 0, sizeof(struct cpu_hw_events));
}
static int
bfin_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
{
unsigned int cpu = (long)hcpu;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_UP_PREPARE:
bfin_write_PFCTL(0);
bfin_pmu_setup(cpu);
break;
default:
break;
}
return NOTIFY_OK;
}
static int __init bfin_pmu_init(void)
{
int ret;
/*
* All of the on-chip counters are "limited", in that they have
* no interrupts, and are therefore unable to do sampling without
* further work and timer assistance.
*/
pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
ret = perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
if (!ret)
perf_cpu_notifier(bfin_pmu_notifier);
return ret;
}
early_initcall(bfin_pmu_init);