linux/drivers/media/usb/dvb-usb-v2/af9035.h
Olli Salonen 5b5560842a [media] af9035: Add support for IT930x USB bridge
Add support for IT930x USB bridge and IT9303 reference design.

It is a DVB-T/T2/C tuner with the following components:
- IT9303 USB bridge
- Si2168-B40 demodulator
- Si2147-A30 tuner

The IT9303 requires firmware that can be downloaded here:
http://trsqr.net/olli/linux/firmwares/it930x/

The Si2168-B40 requires firmware, but the one that is used by PCTV 292e can be used.
http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/

The Si2147-A30 tuner does not require firmware loading.

Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23 21:49:42 -03:00

151 lines
3.9 KiB
C

/*
* Afatech AF9035 DVB USB driver
*
* Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef AF9035_H
#define AF9035_H
#include "dvb_usb.h"
#include "af9033.h"
#include "tua9001.h"
#include "fc0011.h"
#include "fc0012.h"
#include "mxl5007t.h"
#include "tda18218.h"
#include "fc2580.h"
#include "it913x.h"
#include "si2168.h"
#include "si2157.h"
struct reg_val {
u32 reg;
u8 val;
};
struct reg_val_mask {
u32 reg;
u8 val;
u8 mask;
};
struct usb_req {
u8 cmd;
u8 mbox;
u8 wlen;
u8 *wbuf;
u8 rlen;
u8 *rbuf;
};
struct state {
#define BUF_LEN 64
u8 buf[BUF_LEN];
u8 seq; /* packet sequence number */
u8 prechip_version;
u8 chip_version;
u16 chip_type;
u8 dual_mode:1;
u16 eeprom_addr;
u8 af9033_i2c_addr[2];
struct af9033_config af9033_config[2];
struct af9033_ops ops;
#define AF9035_I2C_CLIENT_MAX 4
struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
struct i2c_adapter *i2c_adapter_demod;
};
static const u32 clock_lut_af9035[] = {
20480000, /* FPGA */
16384000, /* 16.38 MHz */
20480000, /* 20.48 MHz */
36000000, /* 36.00 MHz */
30000000, /* 30.00 MHz */
26000000, /* 26.00 MHz */
28000000, /* 28.00 MHz */
32000000, /* 32.00 MHz */
34000000, /* 34.00 MHz */
24000000, /* 24.00 MHz */
22000000, /* 22.00 MHz */
12000000, /* 12.00 MHz */
};
static const u32 clock_lut_it9135[] = {
12000000, /* 12.00 MHz */
20480000, /* 20.48 MHz */
36000000, /* 36.00 MHz */
30000000, /* 30.00 MHz */
26000000, /* 26.00 MHz */
28000000, /* 28.00 MHz */
32000000, /* 32.00 MHz */
34000000, /* 34.00 MHz */
24000000, /* 24.00 MHz */
22000000, /* 22.00 MHz */
};
#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"
#define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"
#define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"
#define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw"
/*
* eeprom is memory mapped as read only. Writing that memory mapped address
* will not corrupt eeprom.
*
* TS mode:
* 0 TS
* 1 DCA + PIP
* 3 PIP
* n DCA
*
* Values 0 and 3 are seen to this day. 0 for single TS and 3 for dual TS.
*/
#define EEPROM_BASE_AF9035 0x42fd
#define EEPROM_BASE_IT9135 0x499c
#define EEPROM_SHIFT 0x10
#define EEPROM_IR_MODE 0x10
#define EEPROM_TS_MODE 0x29
#define EEPROM_2ND_DEMOD_ADDR 0x2a
#define EEPROM_IR_TYPE 0x2c
#define EEPROM_1_IF_L 0x30
#define EEPROM_1_IF_H 0x31
#define EEPROM_1_TUNER_ID 0x34
#define EEPROM_2_IF_L 0x40
#define EEPROM_2_IF_H 0x41
#define EEPROM_2_TUNER_ID 0x44
/* USB commands */
#define CMD_MEM_RD 0x00
#define CMD_MEM_WR 0x01
#define CMD_I2C_RD 0x02
#define CMD_I2C_WR 0x03
#define CMD_IR_GET 0x18
#define CMD_FW_DL 0x21
#define CMD_FW_QUERYINFO 0x22
#define CMD_FW_BOOT 0x23
#define CMD_FW_DL_BEGIN 0x24
#define CMD_FW_DL_END 0x25
#define CMD_FW_SCATTER_WR 0x29
#define CMD_GENERIC_I2C_RD 0x2a
#define CMD_GENERIC_I2C_WR 0x2b
#endif