linux/arch/arm/mach-omap2/dpll44xx.c
Rajendra Nayak 70db8a6273 omap4: dpll: Enable auto gate control for all MX postdividers
Enable hardware gate control for all dpll MX and X2 postdividers.
This requires the allow_idle/deny_idle functions to be
populated for all clock nodes (mx/x2 post dividers) in
clkops.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-25 16:10:17 -07:00

85 lines
1.8 KiB
C

/*
* OMAP4-specific DPLL control functions
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Rajendra Nayak
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include "clock.h"
#include "cm-regbits-44xx.h"
/* Supported only on OMAP4 */
int omap4_dpllmx_gatectrl_read(struct clk *clk)
{
u32 v;
u32 mask;
if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
return -EINVAL;
mask = clk->flags & CLOCK_CLKOUTX2 ?
OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
v = __raw_readl(clk->clksel_reg);
v &= mask;
v >>= __ffs(mask);
return v;
}
void omap4_dpllmx_allow_gatectrl(struct clk *clk)
{
u32 v;
u32 mask;
if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
return;
mask = clk->flags & CLOCK_CLKOUTX2 ?
OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
v = __raw_readl(clk->clksel_reg);
/* Clear the bit to allow gatectrl */
v &= ~mask;
__raw_writel(v, clk->clksel_reg);
}
void omap4_dpllmx_deny_gatectrl(struct clk *clk)
{
u32 v;
u32 mask;
if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
return;
mask = clk->flags & CLOCK_CLKOUTX2 ?
OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
v = __raw_readl(clk->clksel_reg);
/* Set the bit to deny gatectrl */
v |= mask;
__raw_writel(v, clk->clksel_reg);
}
const struct clkops clkops_omap4_dpllmx_ops = {
.allow_idle = omap4_dpllmx_allow_gatectrl,
.deny_idle = omap4_dpllmx_deny_gatectrl,
};