mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
2906aecb9a
Fixes the following W=1 kernel build warning(s): drivers/leds/leds-lm3530.c:113: warning: Function parameter or member 'brightness' not described in 'lm3530_data' Cc: Pavel Machek <pavel@ucw.cz> Cc: Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Dan Murphy <D.Murphy@motorola.com> Cc: linux-leds@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
502 lines
13 KiB
C
502 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2011 ST-Ericsson SA.
|
|
* Copyright (C) 2009 Motorola, Inc.
|
|
*
|
|
* Simple driver for National Semiconductor LM3530 Backlight driver chip
|
|
*
|
|
* Author: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
|
|
* based on leds-lm3530.c by Dan Murphy <D.Murphy@motorola.com>
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/input.h>
|
|
#include <linux/led-lm3530.h>
|
|
#include <linux/types.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/module.h>
|
|
|
|
#define LM3530_LED_DEV "lcd-backlight"
|
|
#define LM3530_NAME "lm3530-led"
|
|
|
|
#define LM3530_GEN_CONFIG 0x10
|
|
#define LM3530_ALS_CONFIG 0x20
|
|
#define LM3530_BRT_RAMP_RATE 0x30
|
|
#define LM3530_ALS_IMP_SELECT 0x41
|
|
#define LM3530_BRT_CTRL_REG 0xA0
|
|
#define LM3530_ALS_ZB0_REG 0x60
|
|
#define LM3530_ALS_ZB1_REG 0x61
|
|
#define LM3530_ALS_ZB2_REG 0x62
|
|
#define LM3530_ALS_ZB3_REG 0x63
|
|
#define LM3530_ALS_Z0T_REG 0x70
|
|
#define LM3530_ALS_Z1T_REG 0x71
|
|
#define LM3530_ALS_Z2T_REG 0x72
|
|
#define LM3530_ALS_Z3T_REG 0x73
|
|
#define LM3530_ALS_Z4T_REG 0x74
|
|
#define LM3530_REG_MAX 14
|
|
|
|
/* General Control Register */
|
|
#define LM3530_EN_I2C_SHIFT (0)
|
|
#define LM3530_RAMP_LAW_SHIFT (1)
|
|
#define LM3530_MAX_CURR_SHIFT (2)
|
|
#define LM3530_EN_PWM_SHIFT (5)
|
|
#define LM3530_PWM_POL_SHIFT (6)
|
|
#define LM3530_EN_PWM_SIMPLE_SHIFT (7)
|
|
|
|
#define LM3530_ENABLE_I2C (1 << LM3530_EN_I2C_SHIFT)
|
|
#define LM3530_ENABLE_PWM (1 << LM3530_EN_PWM_SHIFT)
|
|
#define LM3530_POL_LOW (1 << LM3530_PWM_POL_SHIFT)
|
|
#define LM3530_ENABLE_PWM_SIMPLE (1 << LM3530_EN_PWM_SIMPLE_SHIFT)
|
|
|
|
/* ALS Config Register Options */
|
|
#define LM3530_ALS_AVG_TIME_SHIFT (0)
|
|
#define LM3530_EN_ALS_SHIFT (3)
|
|
#define LM3530_ALS_SEL_SHIFT (5)
|
|
|
|
#define LM3530_ENABLE_ALS (3 << LM3530_EN_ALS_SHIFT)
|
|
|
|
/* Brightness Ramp Rate Register */
|
|
#define LM3530_BRT_RAMP_FALL_SHIFT (0)
|
|
#define LM3530_BRT_RAMP_RISE_SHIFT (3)
|
|
|
|
/* ALS Resistor Select */
|
|
#define LM3530_ALS1_IMP_SHIFT (0)
|
|
#define LM3530_ALS2_IMP_SHIFT (4)
|
|
|
|
/* Zone Boundary Register defaults */
|
|
#define LM3530_ALS_ZB_MAX (4)
|
|
#define LM3530_ALS_WINDOW_mV (1000)
|
|
#define LM3530_ALS_OFFSET_mV (4)
|
|
|
|
/* Zone Target Register defaults */
|
|
#define LM3530_DEF_ZT_0 (0x7F)
|
|
#define LM3530_DEF_ZT_1 (0x66)
|
|
#define LM3530_DEF_ZT_2 (0x4C)
|
|
#define LM3530_DEF_ZT_3 (0x33)
|
|
#define LM3530_DEF_ZT_4 (0x19)
|
|
|
|
/* 7 bits are used for the brightness : LM3530_BRT_CTRL_REG */
|
|
#define MAX_BRIGHTNESS (127)
|
|
|
|
struct lm3530_mode_map {
|
|
const char *mode;
|
|
enum lm3530_mode mode_val;
|
|
};
|
|
|
|
static struct lm3530_mode_map mode_map[] = {
|
|
{ "man", LM3530_BL_MODE_MANUAL },
|
|
{ "als", LM3530_BL_MODE_ALS },
|
|
{ "pwm", LM3530_BL_MODE_PWM },
|
|
};
|
|
|
|
/**
|
|
* struct lm3530_data
|
|
* @led_dev: led class device
|
|
* @client: i2c client
|
|
* @pdata: LM3530 platform data
|
|
* @mode: mode of operation - manual, ALS, PWM
|
|
* @regulator: regulator
|
|
* @brightness: previous brightness value
|
|
* @enable: regulator is enabled
|
|
*/
|
|
struct lm3530_data {
|
|
struct led_classdev led_dev;
|
|
struct i2c_client *client;
|
|
struct lm3530_platform_data *pdata;
|
|
enum lm3530_mode mode;
|
|
struct regulator *regulator;
|
|
enum led_brightness brightness;
|
|
bool enable;
|
|
};
|
|
|
|
/*
|
|
* struct lm3530_als_data
|
|
* @config : value of ALS configuration register
|
|
* @imp_sel : value of ALS resistor select register
|
|
* @zone : values of ALS ZB(Zone Boundary) registers
|
|
*/
|
|
struct lm3530_als_data {
|
|
u8 config;
|
|
u8 imp_sel;
|
|
u8 zones[LM3530_ALS_ZB_MAX];
|
|
};
|
|
|
|
static const u8 lm3530_reg[LM3530_REG_MAX] = {
|
|
LM3530_GEN_CONFIG,
|
|
LM3530_ALS_CONFIG,
|
|
LM3530_BRT_RAMP_RATE,
|
|
LM3530_ALS_IMP_SELECT,
|
|
LM3530_BRT_CTRL_REG,
|
|
LM3530_ALS_ZB0_REG,
|
|
LM3530_ALS_ZB1_REG,
|
|
LM3530_ALS_ZB2_REG,
|
|
LM3530_ALS_ZB3_REG,
|
|
LM3530_ALS_Z0T_REG,
|
|
LM3530_ALS_Z1T_REG,
|
|
LM3530_ALS_Z2T_REG,
|
|
LM3530_ALS_Z3T_REG,
|
|
LM3530_ALS_Z4T_REG,
|
|
};
|
|
|
|
static int lm3530_get_mode_from_str(const char *str)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mode_map); i++)
|
|
if (sysfs_streq(str, mode_map[i].mode))
|
|
return mode_map[i].mode_val;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void lm3530_als_configure(struct lm3530_platform_data *pdata,
|
|
struct lm3530_als_data *als)
|
|
{
|
|
int i;
|
|
u32 als_vmin, als_vmax, als_vstep;
|
|
|
|
if (pdata->als_vmax == 0) {
|
|
pdata->als_vmin = 0;
|
|
pdata->als_vmax = LM3530_ALS_WINDOW_mV;
|
|
}
|
|
|
|
als_vmin = pdata->als_vmin;
|
|
als_vmax = pdata->als_vmax;
|
|
|
|
if ((als_vmax - als_vmin) > LM3530_ALS_WINDOW_mV)
|
|
pdata->als_vmax = als_vmax = als_vmin + LM3530_ALS_WINDOW_mV;
|
|
|
|
/* n zone boundary makes n+1 zones */
|
|
als_vstep = (als_vmax - als_vmin) / (LM3530_ALS_ZB_MAX + 1);
|
|
|
|
for (i = 0; i < LM3530_ALS_ZB_MAX; i++)
|
|
als->zones[i] = (((als_vmin + LM3530_ALS_OFFSET_mV) +
|
|
als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
|
|
|
|
als->config =
|
|
(pdata->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
|
|
(LM3530_ENABLE_ALS) |
|
|
(pdata->als_input_mode << LM3530_ALS_SEL_SHIFT);
|
|
|
|
als->imp_sel =
|
|
(pdata->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
|
|
(pdata->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
|
|
}
|
|
|
|
static int lm3530_led_enable(struct lm3530_data *drvdata)
|
|
{
|
|
int ret;
|
|
|
|
if (drvdata->enable)
|
|
return 0;
|
|
|
|
ret = regulator_enable(drvdata->regulator);
|
|
if (ret) {
|
|
dev_err(drvdata->led_dev.dev, "Failed to enable vin:%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
drvdata->enable = true;
|
|
return 0;
|
|
}
|
|
|
|
static void lm3530_led_disable(struct lm3530_data *drvdata)
|
|
{
|
|
int ret;
|
|
|
|
if (!drvdata->enable)
|
|
return;
|
|
|
|
ret = regulator_disable(drvdata->regulator);
|
|
if (ret) {
|
|
dev_err(drvdata->led_dev.dev, "Failed to disable vin:%d\n",
|
|
ret);
|
|
return;
|
|
}
|
|
|
|
drvdata->enable = false;
|
|
}
|
|
|
|
static int lm3530_init_registers(struct lm3530_data *drvdata)
|
|
{
|
|
int ret = 0;
|
|
int i;
|
|
u8 gen_config;
|
|
u8 brt_ramp;
|
|
u8 brightness;
|
|
u8 reg_val[LM3530_REG_MAX];
|
|
struct lm3530_platform_data *pdata = drvdata->pdata;
|
|
struct i2c_client *client = drvdata->client;
|
|
struct lm3530_pwm_data *pwm = &pdata->pwm_data;
|
|
struct lm3530_als_data als;
|
|
|
|
memset(&als, 0, sizeof(struct lm3530_als_data));
|
|
|
|
gen_config = (pdata->brt_ramp_law << LM3530_RAMP_LAW_SHIFT) |
|
|
((pdata->max_current & 7) << LM3530_MAX_CURR_SHIFT);
|
|
|
|
switch (drvdata->mode) {
|
|
case LM3530_BL_MODE_MANUAL:
|
|
gen_config |= LM3530_ENABLE_I2C;
|
|
break;
|
|
case LM3530_BL_MODE_ALS:
|
|
gen_config |= LM3530_ENABLE_I2C;
|
|
lm3530_als_configure(pdata, &als);
|
|
break;
|
|
case LM3530_BL_MODE_PWM:
|
|
gen_config |= LM3530_ENABLE_PWM | LM3530_ENABLE_PWM_SIMPLE |
|
|
(pdata->pwm_pol_hi << LM3530_PWM_POL_SHIFT);
|
|
break;
|
|
}
|
|
|
|
brt_ramp = (pdata->brt_ramp_fall << LM3530_BRT_RAMP_FALL_SHIFT) |
|
|
(pdata->brt_ramp_rise << LM3530_BRT_RAMP_RISE_SHIFT);
|
|
|
|
if (drvdata->brightness)
|
|
brightness = drvdata->brightness;
|
|
else
|
|
brightness = drvdata->brightness = pdata->brt_val;
|
|
|
|
if (brightness > drvdata->led_dev.max_brightness)
|
|
brightness = drvdata->led_dev.max_brightness;
|
|
|
|
reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */
|
|
reg_val[1] = als.config; /* LM3530_ALS_CONFIG */
|
|
reg_val[2] = brt_ramp; /* LM3530_BRT_RAMP_RATE */
|
|
reg_val[3] = als.imp_sel; /* LM3530_ALS_IMP_SELECT */
|
|
reg_val[4] = brightness; /* LM3530_BRT_CTRL_REG */
|
|
reg_val[5] = als.zones[0]; /* LM3530_ALS_ZB0_REG */
|
|
reg_val[6] = als.zones[1]; /* LM3530_ALS_ZB1_REG */
|
|
reg_val[7] = als.zones[2]; /* LM3530_ALS_ZB2_REG */
|
|
reg_val[8] = als.zones[3]; /* LM3530_ALS_ZB3_REG */
|
|
reg_val[9] = LM3530_DEF_ZT_0; /* LM3530_ALS_Z0T_REG */
|
|
reg_val[10] = LM3530_DEF_ZT_1; /* LM3530_ALS_Z1T_REG */
|
|
reg_val[11] = LM3530_DEF_ZT_2; /* LM3530_ALS_Z2T_REG */
|
|
reg_val[12] = LM3530_DEF_ZT_3; /* LM3530_ALS_Z3T_REG */
|
|
reg_val[13] = LM3530_DEF_ZT_4; /* LM3530_ALS_Z4T_REG */
|
|
|
|
ret = lm3530_led_enable(drvdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < LM3530_REG_MAX; i++) {
|
|
/* do not update brightness register when pwm mode */
|
|
if (lm3530_reg[i] == LM3530_BRT_CTRL_REG &&
|
|
drvdata->mode == LM3530_BL_MODE_PWM) {
|
|
if (pwm->pwm_set_intensity)
|
|
pwm->pwm_set_intensity(reg_val[i],
|
|
drvdata->led_dev.max_brightness);
|
|
continue;
|
|
}
|
|
|
|
ret = i2c_smbus_write_byte_data(client,
|
|
lm3530_reg[i], reg_val[i]);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void lm3530_brightness_set(struct led_classdev *led_cdev,
|
|
enum led_brightness brt_val)
|
|
{
|
|
int err;
|
|
struct lm3530_data *drvdata =
|
|
container_of(led_cdev, struct lm3530_data, led_dev);
|
|
struct lm3530_platform_data *pdata = drvdata->pdata;
|
|
struct lm3530_pwm_data *pwm = &pdata->pwm_data;
|
|
u8 max_brightness = led_cdev->max_brightness;
|
|
|
|
switch (drvdata->mode) {
|
|
case LM3530_BL_MODE_MANUAL:
|
|
|
|
if (!drvdata->enable) {
|
|
err = lm3530_init_registers(drvdata);
|
|
if (err) {
|
|
dev_err(&drvdata->client->dev,
|
|
"Register Init failed: %d\n", err);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* set the brightness in brightness control register*/
|
|
err = i2c_smbus_write_byte_data(drvdata->client,
|
|
LM3530_BRT_CTRL_REG, brt_val);
|
|
if (err)
|
|
dev_err(&drvdata->client->dev,
|
|
"Unable to set brightness: %d\n", err);
|
|
else
|
|
drvdata->brightness = brt_val;
|
|
|
|
if (brt_val == 0)
|
|
lm3530_led_disable(drvdata);
|
|
break;
|
|
case LM3530_BL_MODE_ALS:
|
|
break;
|
|
case LM3530_BL_MODE_PWM:
|
|
if (pwm->pwm_set_intensity)
|
|
pwm->pwm_set_intensity(brt_val, max_brightness);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static ssize_t mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
struct lm3530_data *drvdata;
|
|
int i, len = 0;
|
|
|
|
drvdata = container_of(led_cdev, struct lm3530_data, led_dev);
|
|
for (i = 0; i < ARRAY_SIZE(mode_map); i++)
|
|
if (drvdata->mode == mode_map[i].mode_val)
|
|
len += sprintf(buf + len, "[%s] ", mode_map[i].mode);
|
|
else
|
|
len += sprintf(buf + len, "%s ", mode_map[i].mode);
|
|
|
|
len += sprintf(buf + len, "\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t mode_store(struct device *dev, struct device_attribute
|
|
*attr, const char *buf, size_t size)
|
|
{
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
struct lm3530_data *drvdata;
|
|
struct lm3530_pwm_data *pwm;
|
|
u8 max_brightness;
|
|
int mode, err;
|
|
|
|
drvdata = container_of(led_cdev, struct lm3530_data, led_dev);
|
|
pwm = &drvdata->pdata->pwm_data;
|
|
max_brightness = led_cdev->max_brightness;
|
|
mode = lm3530_get_mode_from_str(buf);
|
|
if (mode < 0) {
|
|
dev_err(dev, "Invalid mode\n");
|
|
return mode;
|
|
}
|
|
|
|
drvdata->mode = mode;
|
|
|
|
/* set pwm to low if unnecessary */
|
|
if (mode != LM3530_BL_MODE_PWM && pwm->pwm_set_intensity)
|
|
pwm->pwm_set_intensity(0, max_brightness);
|
|
|
|
err = lm3530_init_registers(drvdata);
|
|
if (err) {
|
|
dev_err(dev, "Setting %s Mode failed :%d\n", buf, err);
|
|
return err;
|
|
}
|
|
|
|
return sizeof(drvdata->mode);
|
|
}
|
|
static DEVICE_ATTR_RW(mode);
|
|
|
|
static struct attribute *lm3530_attrs[] = {
|
|
&dev_attr_mode.attr,
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(lm3530);
|
|
|
|
static int lm3530_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct lm3530_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct lm3530_data *drvdata;
|
|
int err = 0;
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&client->dev, "platform data required\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* BL mode */
|
|
if (pdata->mode > LM3530_BL_MODE_PWM) {
|
|
dev_err(&client->dev, "Illegal Mode request\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
dev_err(&client->dev, "I2C_FUNC_I2C not supported\n");
|
|
return -EIO;
|
|
}
|
|
|
|
drvdata = devm_kzalloc(&client->dev, sizeof(struct lm3530_data),
|
|
GFP_KERNEL);
|
|
if (drvdata == NULL)
|
|
return -ENOMEM;
|
|
|
|
drvdata->mode = pdata->mode;
|
|
drvdata->client = client;
|
|
drvdata->pdata = pdata;
|
|
drvdata->brightness = LED_OFF;
|
|
drvdata->enable = false;
|
|
drvdata->led_dev.name = LM3530_LED_DEV;
|
|
drvdata->led_dev.brightness_set = lm3530_brightness_set;
|
|
drvdata->led_dev.max_brightness = MAX_BRIGHTNESS;
|
|
drvdata->led_dev.groups = lm3530_groups;
|
|
|
|
i2c_set_clientdata(client, drvdata);
|
|
|
|
drvdata->regulator = devm_regulator_get(&client->dev, "vin");
|
|
if (IS_ERR(drvdata->regulator)) {
|
|
dev_err(&client->dev, "regulator get failed\n");
|
|
err = PTR_ERR(drvdata->regulator);
|
|
drvdata->regulator = NULL;
|
|
return err;
|
|
}
|
|
|
|
if (drvdata->pdata->brt_val) {
|
|
err = lm3530_init_registers(drvdata);
|
|
if (err < 0) {
|
|
dev_err(&client->dev,
|
|
"Register Init failed: %d\n", err);
|
|
return err;
|
|
}
|
|
}
|
|
err = led_classdev_register(&client->dev, &drvdata->led_dev);
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "Register led class failed: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lm3530_remove(struct i2c_client *client)
|
|
{
|
|
struct lm3530_data *drvdata = i2c_get_clientdata(client);
|
|
|
|
lm3530_led_disable(drvdata);
|
|
led_classdev_unregister(&drvdata->led_dev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lm3530_id[] = {
|
|
{LM3530_NAME, 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lm3530_id);
|
|
|
|
static struct i2c_driver lm3530_i2c_driver = {
|
|
.probe = lm3530_probe,
|
|
.remove = lm3530_remove,
|
|
.id_table = lm3530_id,
|
|
.driver = {
|
|
.name = LM3530_NAME,
|
|
},
|
|
};
|
|
|
|
module_i2c_driver(lm3530_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Back Light driver for LM3530");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>");
|