mirror of
https://github.com/torvalds/linux.git
synced 2024-11-07 20:51:47 +00:00
4bd597b633
The mxc-ehci driver calls SoC specific phy initialization right after calling board specific initialization. To offer greater flexibility for boards to setup the phy and to get rid of some unnecessary flags in platform data this patch lets the boards call the SoC specific phy initialization and remove it from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
356 lines
8.2 KiB
C
356 lines
8.2 KiB
C
/*
|
|
* Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
|
|
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/at24.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mtd/plat-ram.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/mfd/mc13783.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include <mach/board-pcm038.h>
|
|
#include <mach/common.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/iomux-mx27.h>
|
|
#include <mach/mxc_nand.h>
|
|
#include <mach/ulpi.h>
|
|
|
|
#include "devices-imx27.h"
|
|
|
|
static const int pcm038_pins[] __initconst = {
|
|
/* UART1 */
|
|
PE12_PF_UART1_TXD,
|
|
PE13_PF_UART1_RXD,
|
|
PE14_PF_UART1_CTS,
|
|
PE15_PF_UART1_RTS,
|
|
/* UART2 */
|
|
PE3_PF_UART2_CTS,
|
|
PE4_PF_UART2_RTS,
|
|
PE6_PF_UART2_TXD,
|
|
PE7_PF_UART2_RXD,
|
|
/* UART3 */
|
|
PE8_PF_UART3_TXD,
|
|
PE9_PF_UART3_RXD,
|
|
PE10_PF_UART3_CTS,
|
|
PE11_PF_UART3_RTS,
|
|
/* FEC */
|
|
PD0_AIN_FEC_TXD0,
|
|
PD1_AIN_FEC_TXD1,
|
|
PD2_AIN_FEC_TXD2,
|
|
PD3_AIN_FEC_TXD3,
|
|
PD4_AOUT_FEC_RX_ER,
|
|
PD5_AOUT_FEC_RXD1,
|
|
PD6_AOUT_FEC_RXD2,
|
|
PD7_AOUT_FEC_RXD3,
|
|
PD8_AF_FEC_MDIO,
|
|
PD9_AIN_FEC_MDC,
|
|
PD10_AOUT_FEC_CRS,
|
|
PD11_AOUT_FEC_TX_CLK,
|
|
PD12_AOUT_FEC_RXD0,
|
|
PD13_AOUT_FEC_RX_DV,
|
|
PD14_AOUT_FEC_RX_CLK,
|
|
PD15_AOUT_FEC_COL,
|
|
PD16_AIN_FEC_TX_ER,
|
|
PF23_AIN_FEC_TX_EN,
|
|
/* I2C2 */
|
|
PC5_PF_I2C2_SDA,
|
|
PC6_PF_I2C2_SCL,
|
|
/* SPI1 */
|
|
PD25_PF_CSPI1_RDY,
|
|
PD29_PF_CSPI1_SCLK,
|
|
PD30_PF_CSPI1_MISO,
|
|
PD31_PF_CSPI1_MOSI,
|
|
/* SSI1 */
|
|
PC20_PF_SSI1_FS,
|
|
PC21_PF_SSI1_RXD,
|
|
PC22_PF_SSI1_TXD,
|
|
PC23_PF_SSI1_CLK,
|
|
/* SSI4 */
|
|
PC16_PF_SSI4_FS,
|
|
PC17_PF_SSI4_RXD,
|
|
PC18_PF_SSI4_TXD,
|
|
PC19_PF_SSI4_CLK,
|
|
/* USB host */
|
|
PA0_PF_USBH2_CLK,
|
|
PA1_PF_USBH2_DIR,
|
|
PA2_PF_USBH2_DATA7,
|
|
PA3_PF_USBH2_NXT,
|
|
PA4_PF_USBH2_STP,
|
|
PD19_AF_USBH2_DATA4,
|
|
PD20_AF_USBH2_DATA3,
|
|
PD21_AF_USBH2_DATA6,
|
|
PD22_AF_USBH2_DATA0,
|
|
PD23_AF_USBH2_DATA2,
|
|
PD24_AF_USBH2_DATA1,
|
|
PD26_AF_USBH2_DATA5,
|
|
};
|
|
|
|
/*
|
|
* Phytec's PCM038 comes with 2MiB battery buffered SRAM,
|
|
* 16 bit width
|
|
*/
|
|
|
|
static struct platdata_mtd_ram pcm038_sram_data = {
|
|
.bankwidth = 2,
|
|
};
|
|
|
|
static struct resource pcm038_sram_resource = {
|
|
.start = MX27_CS1_BASE_ADDR,
|
|
.end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device pcm038_sram_mtd_device = {
|
|
.name = "mtd-ram",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &pcm038_sram_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &pcm038_sram_resource,
|
|
};
|
|
|
|
/*
|
|
* Phytec's phyCORE-i.MX27 comes with 32MiB flash,
|
|
* 16 bit width
|
|
*/
|
|
static struct physmap_flash_data pcm038_flash_data = {
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource pcm038_flash_resource = {
|
|
.start = 0xc0000000,
|
|
.end = 0xc1ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device pcm038_nor_mtd_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &pcm038_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &pcm038_flash_resource,
|
|
};
|
|
|
|
static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static const struct mxc_nand_platform_data
|
|
pcm038_nand_board_info __initconst = {
|
|
.width = 1,
|
|
.hw_ecc = 1,
|
|
};
|
|
|
|
static struct platform_device *platform_devices[] __initdata = {
|
|
&pcm038_nor_mtd_device,
|
|
&pcm038_sram_mtd_device,
|
|
};
|
|
|
|
/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
|
|
* setup other stuffs to access the sram. */
|
|
static void __init pcm038_init_sram(void)
|
|
{
|
|
mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
|
|
}
|
|
|
|
static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
|
|
.bitrate = 100000,
|
|
};
|
|
|
|
static struct at24_platform_data board_eeprom = {
|
|
.byte_len = 4096,
|
|
.page_size = 32,
|
|
.flags = AT24_FLAG_ADDR16,
|
|
};
|
|
|
|
static struct i2c_board_info pcm038_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
|
|
.platform_data = &board_eeprom,
|
|
}, {
|
|
I2C_BOARD_INFO("pcf8563", 0x51),
|
|
}, {
|
|
I2C_BOARD_INFO("lm75", 0x4a),
|
|
}
|
|
};
|
|
|
|
static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
|
|
|
|
static const struct spi_imx_master pcm038_spi0_data __initconst = {
|
|
.chipselect = pcm038_spi_cs,
|
|
.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
|
|
};
|
|
|
|
static struct regulator_consumer_supply sdhc1_consumers[] = {
|
|
{
|
|
.dev_name = "mxc-mmc.1",
|
|
.supply = "sdhc_vcc",
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data sdhc1_data = {
|
|
.constraints = {
|
|
.min_uV = 3000000,
|
|
.max_uV = 3400000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL |
|
|
REGULATOR_MODE_FAST,
|
|
.always_on = 0,
|
|
.boot_on = 0,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
|
|
.consumer_supplies = sdhc1_consumers,
|
|
};
|
|
|
|
static struct regulator_consumer_supply cam_consumers[] = {
|
|
{
|
|
.dev = NULL,
|
|
.supply = "imx_cam_vcc",
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data cam_data = {
|
|
.constraints = {
|
|
.min_uV = 3000000,
|
|
.max_uV = 3400000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL |
|
|
REGULATOR_MODE_FAST,
|
|
.always_on = 0,
|
|
.boot_on = 0,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
|
|
.consumer_supplies = cam_consumers,
|
|
};
|
|
|
|
static struct mc13xxx_regulator_init_data pcm038_regulators[] = {
|
|
{
|
|
.id = MC13783_REG_VCAM,
|
|
.init_data = &cam_data,
|
|
}, {
|
|
.id = MC13783_REG_VMMC1,
|
|
.init_data = &sdhc1_data,
|
|
},
|
|
};
|
|
|
|
static struct mc13xxx_platform_data pcm038_pmic = {
|
|
.regulators = pcm038_regulators,
|
|
.num_regulators = ARRAY_SIZE(pcm038_regulators),
|
|
.flags = MC13XXX_USE_ADC | MC13XXX_USE_REGULATOR |
|
|
MC13XXX_USE_TOUCHSCREEN,
|
|
};
|
|
|
|
static struct spi_board_info pcm038_spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "mc13783",
|
|
.irq = IRQ_GPIOB(23),
|
|
.max_speed_hz = 300000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.platform_data = &pcm038_pmic,
|
|
.mode = SPI_CS_HIGH,
|
|
}
|
|
};
|
|
|
|
static int pcm038_usbh2_init(struct platform_device *pdev)
|
|
{
|
|
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
|
|
MXC_EHCI_INTERFACE_DIFF_UNI);
|
|
}
|
|
|
|
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
|
|
.init = pcm038_usbh2_init,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
};
|
|
|
|
static void __init pcm038_init(void)
|
|
{
|
|
mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
|
|
"PCM038");
|
|
|
|
pcm038_init_sram();
|
|
|
|
imx27_add_imx_uart0(&uart_pdata);
|
|
imx27_add_imx_uart1(&uart_pdata);
|
|
imx27_add_imx_uart2(&uart_pdata);
|
|
|
|
mxc_gpio_mode(PE16_AF_OWIRE);
|
|
imx27_add_mxc_nand(&pcm038_nand_board_info);
|
|
|
|
/* only the i2c master 1 is used on this CPU card */
|
|
i2c_register_board_info(1, pcm038_i2c_devices,
|
|
ARRAY_SIZE(pcm038_i2c_devices));
|
|
|
|
imx27_add_imx_i2c(1, &pcm038_i2c1_data);
|
|
|
|
/* PE18 for user-LED D40 */
|
|
mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
|
|
|
|
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
|
|
|
|
/* MC13783 IRQ */
|
|
mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
|
|
|
|
imx27_add_spi_imx0(&pcm038_spi0_data);
|
|
spi_register_board_info(pcm038_spi_board_info,
|
|
ARRAY_SIZE(pcm038_spi_board_info));
|
|
|
|
imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
|
|
|
|
imx27_add_fec(NULL);
|
|
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
imx27_add_imx2_wdt(NULL);
|
|
imx27_add_mxc_w1(NULL);
|
|
|
|
#ifdef CONFIG_MACH_PCM970_BASEBOARD
|
|
pcm970_baseboard_init();
|
|
#endif
|
|
}
|
|
|
|
static void __init pcm038_timer_init(void)
|
|
{
|
|
mx27_clocks_init(26000000);
|
|
}
|
|
|
|
static struct sys_timer pcm038_timer = {
|
|
.init = pcm038_timer_init,
|
|
};
|
|
|
|
MACHINE_START(PCM038, "phyCORE-i.MX27")
|
|
.boot_params = MX27_PHYS_OFFSET + 0x100,
|
|
.map_io = mx27_map_io,
|
|
.init_early = imx27_init_early,
|
|
.init_irq = mx27_init_irq,
|
|
.timer = &pcm038_timer,
|
|
.init_machine = pcm038_init,
|
|
MACHINE_END
|