mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 13:22:23 +00:00
4849625569
Commit 4c09eed
(net: fec: Enable imx6 enet checksum acceleration.)
enables hardware checksum acceleration unconditionally for all fec
variants. This is inappropriate, because some variants like imx5 have
no such support on hardware. Consequently, fec is broken on these
platforms. Fix it by enabling hardware checksum only on imx6q-fec type
of controllers.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Jim Baxter <jim_baxter@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2089 lines
53 KiB
C
2089 lines
53 KiB
C
/*
|
|
* Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
|
|
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
|
|
*
|
|
* Right now, I am very wasteful with the buffers. I allocate memory
|
|
* pages and then divide them into 2K frame buffers. This way I know I
|
|
* have buffers large enough to hold one frame within one buffer descriptor.
|
|
* Once I get this working, I will use 64 or 128 byte CPM buffers, which
|
|
* will be much more memory efficient and will easily handle lots of
|
|
* small packets.
|
|
*
|
|
* Much better multiple PHY support by Magnus Damm.
|
|
* Copyright (c) 2000 Ericsson Radio Systems AB.
|
|
*
|
|
* Support for FEC controller of ColdFire processors.
|
|
* Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com)
|
|
*
|
|
* Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
|
|
* Copyright (c) 2004-2006 Macq Electronique SA.
|
|
*
|
|
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/in.h>
|
|
#include <linux/ip.h>
|
|
#include <net/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/udp.h>
|
|
#include <linux/icmp.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/fec.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
|
|
#include "fec.h"
|
|
|
|
#if defined(CONFIG_ARM)
|
|
#define FEC_ALIGNMENT 0xf
|
|
#else
|
|
#define FEC_ALIGNMENT 0x3
|
|
#endif
|
|
|
|
#define DRIVER_NAME "fec"
|
|
#define FEC_NAPI_WEIGHT 64
|
|
|
|
/* Pause frame feild and FIFO threshold */
|
|
#define FEC_ENET_FCE (1 << 5)
|
|
#define FEC_ENET_RSEM_V 0x84
|
|
#define FEC_ENET_RSFL_V 16
|
|
#define FEC_ENET_RAEM_V 0x8
|
|
#define FEC_ENET_RAFL_V 0x8
|
|
#define FEC_ENET_OPD_V 0xFFF0
|
|
|
|
/* Controller is ENET-MAC */
|
|
#define FEC_QUIRK_ENET_MAC (1 << 0)
|
|
/* Controller needs driver to swap frame */
|
|
#define FEC_QUIRK_SWAP_FRAME (1 << 1)
|
|
/* Controller uses gasket */
|
|
#define FEC_QUIRK_USE_GASKET (1 << 2)
|
|
/* Controller has GBIT support */
|
|
#define FEC_QUIRK_HAS_GBIT (1 << 3)
|
|
/* Controller has extend desc buffer */
|
|
#define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4)
|
|
/* Controller has hardware checksum support */
|
|
#define FEC_QUIRK_HAS_CSUM (1 << 5)
|
|
|
|
static struct platform_device_id fec_devtype[] = {
|
|
{
|
|
/* keep it for coldfire */
|
|
.name = DRIVER_NAME,
|
|
.driver_data = 0,
|
|
}, {
|
|
.name = "imx25-fec",
|
|
.driver_data = FEC_QUIRK_USE_GASKET,
|
|
}, {
|
|
.name = "imx27-fec",
|
|
.driver_data = 0,
|
|
}, {
|
|
.name = "imx28-fec",
|
|
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
|
|
}, {
|
|
.name = "imx6q-fec",
|
|
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
|
|
FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM,
|
|
}, {
|
|
.name = "mvf-fec",
|
|
.driver_data = FEC_QUIRK_ENET_MAC,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, fec_devtype);
|
|
|
|
enum imx_fec_type {
|
|
IMX25_FEC = 1, /* runs on i.mx25/50/53 */
|
|
IMX27_FEC, /* runs on i.mx27/35/51 */
|
|
IMX28_FEC,
|
|
IMX6Q_FEC,
|
|
MVF_FEC,
|
|
};
|
|
|
|
static const struct of_device_id fec_dt_ids[] = {
|
|
{ .compatible = "fsl,imx25-fec", .data = &fec_devtype[IMX25_FEC], },
|
|
{ .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], },
|
|
{ .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], },
|
|
{ .compatible = "fsl,imx6q-fec", .data = &fec_devtype[IMX6Q_FEC], },
|
|
{ .compatible = "fsl,mvf-fec", .data = &fec_devtype[MVF_FEC], },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, fec_dt_ids);
|
|
|
|
static unsigned char macaddr[ETH_ALEN];
|
|
module_param_array(macaddr, byte, NULL, 0);
|
|
MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
|
|
|
|
#if defined(CONFIG_M5272)
|
|
/*
|
|
* Some hardware gets it MAC address out of local flash memory.
|
|
* if this is non-zero then assume it is the address to get MAC from.
|
|
*/
|
|
#if defined(CONFIG_NETtel)
|
|
#define FEC_FLASHMAC 0xf0006006
|
|
#elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES)
|
|
#define FEC_FLASHMAC 0xf0006000
|
|
#elif defined(CONFIG_CANCam)
|
|
#define FEC_FLASHMAC 0xf0020000
|
|
#elif defined (CONFIG_M5272C3)
|
|
#define FEC_FLASHMAC (0xffe04000 + 4)
|
|
#elif defined(CONFIG_MOD5272)
|
|
#define FEC_FLASHMAC 0xffc0406b
|
|
#else
|
|
#define FEC_FLASHMAC 0
|
|
#endif
|
|
#endif /* CONFIG_M5272 */
|
|
|
|
#if (((RX_RING_SIZE + TX_RING_SIZE) * 32) > PAGE_SIZE)
|
|
#error "FEC: descriptor ring size constants too large"
|
|
#endif
|
|
|
|
/* Interrupt events/masks. */
|
|
#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
|
|
#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
|
|
#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
|
|
#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
|
|
#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
|
|
#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
|
|
#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
|
|
#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
|
|
#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
|
|
#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
|
|
|
|
#define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII)
|
|
#define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF))
|
|
|
|
/* The FEC stores dest/src/type, data, and checksum for receive packets.
|
|
*/
|
|
#define PKT_MAXBUF_SIZE 1518
|
|
#define PKT_MINBUF_SIZE 64
|
|
#define PKT_MAXBLR_SIZE 1520
|
|
|
|
/* FEC receive acceleration */
|
|
#define FEC_RACC_IPDIS (1 << 1)
|
|
#define FEC_RACC_PRODIS (1 << 2)
|
|
#define FEC_RACC_OPTIONS (FEC_RACC_IPDIS | FEC_RACC_PRODIS)
|
|
|
|
/*
|
|
* The 5270/5271/5280/5282/532x RX control register also contains maximum frame
|
|
* size bits. Other FEC hardware does not, so we need to take that into
|
|
* account when setting it.
|
|
*/
|
|
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
|
|
defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM)
|
|
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
|
|
#else
|
|
#define OPT_FRAME_SIZE 0
|
|
#endif
|
|
|
|
/* FEC MII MMFR bits definition */
|
|
#define FEC_MMFR_ST (1 << 30)
|
|
#define FEC_MMFR_OP_READ (2 << 28)
|
|
#define FEC_MMFR_OP_WRITE (1 << 28)
|
|
#define FEC_MMFR_PA(v) ((v & 0x1f) << 23)
|
|
#define FEC_MMFR_RA(v) ((v & 0x1f) << 18)
|
|
#define FEC_MMFR_TA (2 << 16)
|
|
#define FEC_MMFR_DATA(v) (v & 0xffff)
|
|
|
|
#define FEC_MII_TIMEOUT 30000 /* us */
|
|
|
|
/* Transmitter timeout */
|
|
#define TX_TIMEOUT (2 * HZ)
|
|
|
|
#define FEC_PAUSE_FLAG_AUTONEG 0x1
|
|
#define FEC_PAUSE_FLAG_ENABLE 0x2
|
|
|
|
static int mii_cnt;
|
|
|
|
static struct bufdesc *fec_enet_get_nextdesc(struct bufdesc *bdp, int is_ex)
|
|
{
|
|
struct bufdesc_ex *ex = (struct bufdesc_ex *)bdp;
|
|
if (is_ex)
|
|
return (struct bufdesc *)(ex + 1);
|
|
else
|
|
return bdp + 1;
|
|
}
|
|
|
|
static struct bufdesc *fec_enet_get_prevdesc(struct bufdesc *bdp, int is_ex)
|
|
{
|
|
struct bufdesc_ex *ex = (struct bufdesc_ex *)bdp;
|
|
if (is_ex)
|
|
return (struct bufdesc *)(ex - 1);
|
|
else
|
|
return bdp - 1;
|
|
}
|
|
|
|
static void *swap_buffer(void *bufaddr, int len)
|
|
{
|
|
int i;
|
|
unsigned int *buf = bufaddr;
|
|
|
|
for (i = 0; i < (len + 3) / 4; i++, buf++)
|
|
*buf = cpu_to_be32(*buf);
|
|
|
|
return bufaddr;
|
|
}
|
|
|
|
static int
|
|
fec_enet_clear_csum(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
/* Only run for packets requiring a checksum. */
|
|
if (skb->ip_summed != CHECKSUM_PARTIAL)
|
|
return 0;
|
|
|
|
if (unlikely(skb_cow_head(skb, 0)))
|
|
return -1;
|
|
|
|
*(__sum16 *)(skb->head + skb->csum_start + skb->csum_offset) = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static netdev_tx_t
|
|
fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
struct bufdesc *bdp;
|
|
void *bufaddr;
|
|
unsigned short status;
|
|
unsigned int index;
|
|
|
|
if (!fep->link) {
|
|
/* Link is down or auto-negotiation is in progress. */
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* Fill in a Tx ring entry */
|
|
bdp = fep->cur_tx;
|
|
|
|
status = bdp->cbd_sc;
|
|
|
|
if (status & BD_ENET_TX_READY) {
|
|
/* Ooops. All transmit buffers are full. Bail out.
|
|
* This should not happen, since ndev->tbusy should be set.
|
|
*/
|
|
netdev_err(ndev, "tx queue full!\n");
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* Protocol checksum off-load for TCP and UDP. */
|
|
if (fec_enet_clear_csum(skb, ndev)) {
|
|
kfree_skb(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Clear all of the status flags */
|
|
status &= ~BD_ENET_TX_STATS;
|
|
|
|
/* Set buffer length and buffer pointer */
|
|
bufaddr = skb->data;
|
|
bdp->cbd_datlen = skb->len;
|
|
|
|
/*
|
|
* On some FEC implementations data must be aligned on
|
|
* 4-byte boundaries. Use bounce buffers to copy data
|
|
* and get it aligned. Ugh.
|
|
*/
|
|
if (fep->bufdesc_ex)
|
|
index = (struct bufdesc_ex *)bdp -
|
|
(struct bufdesc_ex *)fep->tx_bd_base;
|
|
else
|
|
index = bdp - fep->tx_bd_base;
|
|
|
|
if (((unsigned long) bufaddr) & FEC_ALIGNMENT) {
|
|
memcpy(fep->tx_bounce[index], skb->data, skb->len);
|
|
bufaddr = fep->tx_bounce[index];
|
|
}
|
|
|
|
/*
|
|
* Some design made an incorrect assumption on endian mode of
|
|
* the system that it's running on. As the result, driver has to
|
|
* swap every frame going to and coming from the controller.
|
|
*/
|
|
if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
|
|
swap_buffer(bufaddr, skb->len);
|
|
|
|
/* Save skb pointer */
|
|
fep->tx_skbuff[index] = skb;
|
|
|
|
/* Push the data cache so the CPM does not get stale memory
|
|
* data.
|
|
*/
|
|
bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, bufaddr,
|
|
FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
|
|
|
|
/* Send it on its way. Tell FEC it's ready, interrupt when done,
|
|
* it's the last BD of the frame, and to put the CRC on the end.
|
|
*/
|
|
status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
|
|
| BD_ENET_TX_LAST | BD_ENET_TX_TC);
|
|
bdp->cbd_sc = status;
|
|
|
|
if (fep->bufdesc_ex) {
|
|
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
ebdp->cbd_bdu = 0;
|
|
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP &&
|
|
fep->hwts_tx_en)) {
|
|
ebdp->cbd_esc = (BD_ENET_TX_TS | BD_ENET_TX_INT);
|
|
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
|
|
} else {
|
|
ebdp->cbd_esc = BD_ENET_TX_INT;
|
|
|
|
/* Enable protocol checksum flags
|
|
* We do not bother with the IP Checksum bits as they
|
|
* are done by the kernel
|
|
*/
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL)
|
|
ebdp->cbd_esc |= BD_ENET_TX_PINS;
|
|
}
|
|
}
|
|
/* If this was the last BD in the ring, start at the beginning again. */
|
|
if (status & BD_ENET_TX_WRAP)
|
|
bdp = fep->tx_bd_base;
|
|
else
|
|
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
|
|
|
|
fep->cur_tx = bdp;
|
|
|
|
if (fep->cur_tx == fep->dirty_tx)
|
|
netif_stop_queue(ndev);
|
|
|
|
/* Trigger transmission start */
|
|
writel(0, fep->hwp + FEC_X_DES_ACTIVE);
|
|
|
|
skb_tx_timestamp(skb);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Init RX & TX buffer descriptors
|
|
*/
|
|
static void fec_enet_bd_init(struct net_device *dev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(dev);
|
|
struct bufdesc *bdp;
|
|
unsigned int i;
|
|
|
|
/* Initialize the receive buffer descriptors. */
|
|
bdp = fep->rx_bd_base;
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
|
|
/* Initialize the BD for every fragment in the page. */
|
|
if (bdp->cbd_bufaddr)
|
|
bdp->cbd_sc = BD_ENET_RX_EMPTY;
|
|
else
|
|
bdp->cbd_sc = 0;
|
|
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
|
|
}
|
|
|
|
/* Set the last buffer to wrap */
|
|
bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
|
|
bdp->cbd_sc |= BD_SC_WRAP;
|
|
|
|
fep->cur_rx = fep->rx_bd_base;
|
|
|
|
/* ...and the same for transmit */
|
|
bdp = fep->tx_bd_base;
|
|
fep->cur_tx = bdp;
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
|
|
/* Initialize the BD for every fragment in the page. */
|
|
bdp->cbd_sc = 0;
|
|
if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) {
|
|
dev_kfree_skb_any(fep->tx_skbuff[i]);
|
|
fep->tx_skbuff[i] = NULL;
|
|
}
|
|
bdp->cbd_bufaddr = 0;
|
|
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
|
|
}
|
|
|
|
/* Set the last buffer to wrap */
|
|
bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
|
|
bdp->cbd_sc |= BD_SC_WRAP;
|
|
fep->dirty_tx = bdp;
|
|
}
|
|
|
|
/* This function is called to start or restart the FEC during a link
|
|
* change. This only happens when switching between half and full
|
|
* duplex.
|
|
*/
|
|
static void
|
|
fec_restart(struct net_device *ndev, int duplex)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
int i;
|
|
u32 val;
|
|
u32 temp_mac[2];
|
|
u32 rcntl = OPT_FRAME_SIZE | 0x04;
|
|
u32 ecntl = 0x2; /* ETHEREN */
|
|
|
|
if (netif_running(ndev)) {
|
|
netif_device_detach(ndev);
|
|
napi_disable(&fep->napi);
|
|
netif_stop_queue(ndev);
|
|
netif_tx_lock(ndev);
|
|
}
|
|
|
|
/* Whack a reset. We should wait for this. */
|
|
writel(1, fep->hwp + FEC_ECNTRL);
|
|
udelay(10);
|
|
|
|
/*
|
|
* enet-mac reset will reset mac address registers too,
|
|
* so need to reconfigure it.
|
|
*/
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
|
|
memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN);
|
|
writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW);
|
|
writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH);
|
|
}
|
|
|
|
/* Clear any outstanding interrupt. */
|
|
writel(0xffc00000, fep->hwp + FEC_IEVENT);
|
|
|
|
/* Reset all multicast. */
|
|
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
|
|
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
|
|
#ifndef CONFIG_M5272
|
|
writel(0, fep->hwp + FEC_HASH_TABLE_HIGH);
|
|
writel(0, fep->hwp + FEC_HASH_TABLE_LOW);
|
|
#endif
|
|
|
|
/* Set maximum receive buffer size. */
|
|
writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
|
|
|
|
fec_enet_bd_init(ndev);
|
|
|
|
/* Set receive and transmit descriptor base. */
|
|
writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
|
|
if (fep->bufdesc_ex)
|
|
writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc_ex)
|
|
* RX_RING_SIZE, fep->hwp + FEC_X_DES_START);
|
|
else
|
|
writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc)
|
|
* RX_RING_SIZE, fep->hwp + FEC_X_DES_START);
|
|
|
|
|
|
for (i = 0; i <= TX_RING_MOD_MASK; i++) {
|
|
if (fep->tx_skbuff[i]) {
|
|
dev_kfree_skb_any(fep->tx_skbuff[i]);
|
|
fep->tx_skbuff[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Enable MII mode */
|
|
if (duplex) {
|
|
/* FD enable */
|
|
writel(0x04, fep->hwp + FEC_X_CNTRL);
|
|
} else {
|
|
/* No Rcv on Xmit */
|
|
rcntl |= 0x02;
|
|
writel(0x0, fep->hwp + FEC_X_CNTRL);
|
|
}
|
|
|
|
fep->full_duplex = duplex;
|
|
|
|
/* Set MII speed */
|
|
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
|
|
|
|
/* set RX checksum */
|
|
val = readl(fep->hwp + FEC_RACC);
|
|
if (fep->csum_flags & FLAG_RX_CSUM_ENABLED)
|
|
val |= FEC_RACC_OPTIONS;
|
|
else
|
|
val &= ~FEC_RACC_OPTIONS;
|
|
writel(val, fep->hwp + FEC_RACC);
|
|
|
|
/*
|
|
* The phy interface and speed need to get configured
|
|
* differently on enet-mac.
|
|
*/
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
|
|
/* Enable flow control and length check */
|
|
rcntl |= 0x40000000 | 0x00000020;
|
|
|
|
/* RGMII, RMII or MII */
|
|
if (fep->phy_interface == PHY_INTERFACE_MODE_RGMII)
|
|
rcntl |= (1 << 6);
|
|
else if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
|
|
rcntl |= (1 << 8);
|
|
else
|
|
rcntl &= ~(1 << 8);
|
|
|
|
/* 1G, 100M or 10M */
|
|
if (fep->phy_dev) {
|
|
if (fep->phy_dev->speed == SPEED_1000)
|
|
ecntl |= (1 << 5);
|
|
else if (fep->phy_dev->speed == SPEED_100)
|
|
rcntl &= ~(1 << 9);
|
|
else
|
|
rcntl |= (1 << 9);
|
|
}
|
|
} else {
|
|
#ifdef FEC_MIIGSK_ENR
|
|
if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) {
|
|
u32 cfgr;
|
|
/* disable the gasket and wait */
|
|
writel(0, fep->hwp + FEC_MIIGSK_ENR);
|
|
while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
|
|
udelay(1);
|
|
|
|
/*
|
|
* configure the gasket:
|
|
* RMII, 50 MHz, no loopback, no echo
|
|
* MII, 25 MHz, no loopback, no echo
|
|
*/
|
|
cfgr = (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
|
|
? BM_MIIGSK_CFGR_RMII : BM_MIIGSK_CFGR_MII;
|
|
if (fep->phy_dev && fep->phy_dev->speed == SPEED_10)
|
|
cfgr |= BM_MIIGSK_CFGR_FRCONT_10M;
|
|
writel(cfgr, fep->hwp + FEC_MIIGSK_CFGR);
|
|
|
|
/* re-enable the gasket */
|
|
writel(2, fep->hwp + FEC_MIIGSK_ENR);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* enable pause frame*/
|
|
if ((fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) ||
|
|
((fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) &&
|
|
fep->phy_dev && fep->phy_dev->pause)) {
|
|
rcntl |= FEC_ENET_FCE;
|
|
|
|
/* set FIFO threshold parameter to reduce overrun */
|
|
writel(FEC_ENET_RSEM_V, fep->hwp + FEC_R_FIFO_RSEM);
|
|
writel(FEC_ENET_RSFL_V, fep->hwp + FEC_R_FIFO_RSFL);
|
|
writel(FEC_ENET_RAEM_V, fep->hwp + FEC_R_FIFO_RAEM);
|
|
writel(FEC_ENET_RAFL_V, fep->hwp + FEC_R_FIFO_RAFL);
|
|
|
|
/* OPD */
|
|
writel(FEC_ENET_OPD_V, fep->hwp + FEC_OPD);
|
|
} else {
|
|
rcntl &= ~FEC_ENET_FCE;
|
|
}
|
|
|
|
writel(rcntl, fep->hwp + FEC_R_CNTRL);
|
|
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
|
|
/* enable ENET endian swap */
|
|
ecntl |= (1 << 8);
|
|
/* enable ENET store and forward mode */
|
|
writel(1 << 8, fep->hwp + FEC_X_WMRK);
|
|
}
|
|
|
|
if (fep->bufdesc_ex)
|
|
ecntl |= (1 << 4);
|
|
|
|
/* And last, enable the transmit and receive processing */
|
|
writel(ecntl, fep->hwp + FEC_ECNTRL);
|
|
writel(0, fep->hwp + FEC_R_DES_ACTIVE);
|
|
|
|
if (fep->bufdesc_ex)
|
|
fec_ptp_start_cyclecounter(ndev);
|
|
|
|
/* Enable interrupts we wish to service */
|
|
writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
|
|
|
|
if (netif_running(ndev)) {
|
|
netif_device_attach(ndev);
|
|
napi_enable(&fep->napi);
|
|
netif_wake_queue(ndev);
|
|
netif_tx_unlock(ndev);
|
|
}
|
|
}
|
|
|
|
static void
|
|
fec_stop(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8);
|
|
|
|
/* We cannot expect a graceful transmit stop without link !!! */
|
|
if (fep->link) {
|
|
writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */
|
|
udelay(10);
|
|
if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA))
|
|
netdev_err(ndev, "Graceful transmit stop did not complete!\n");
|
|
}
|
|
|
|
/* Whack a reset. We should wait for this. */
|
|
writel(1, fep->hwp + FEC_ECNTRL);
|
|
udelay(10);
|
|
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
|
|
writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
|
|
|
|
/* We have to keep ENET enabled to have MII interrupt stay working */
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
|
|
writel(2, fep->hwp + FEC_ECNTRL);
|
|
writel(rmii_mode, fep->hwp + FEC_R_CNTRL);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
fec_timeout(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
ndev->stats.tx_errors++;
|
|
|
|
fep->delay_work.timeout = true;
|
|
schedule_delayed_work(&(fep->delay_work.delay_work), 0);
|
|
}
|
|
|
|
static void fec_enet_work(struct work_struct *work)
|
|
{
|
|
struct fec_enet_private *fep =
|
|
container_of(work,
|
|
struct fec_enet_private,
|
|
delay_work.delay_work.work);
|
|
|
|
if (fep->delay_work.timeout) {
|
|
fep->delay_work.timeout = false;
|
|
fec_restart(fep->netdev, fep->full_duplex);
|
|
netif_wake_queue(fep->netdev);
|
|
}
|
|
}
|
|
|
|
static void
|
|
fec_enet_tx(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep;
|
|
struct bufdesc *bdp;
|
|
unsigned short status;
|
|
struct sk_buff *skb;
|
|
int index = 0;
|
|
|
|
fep = netdev_priv(ndev);
|
|
bdp = fep->dirty_tx;
|
|
|
|
/* get next bdp of dirty_tx */
|
|
if (bdp->cbd_sc & BD_ENET_TX_WRAP)
|
|
bdp = fep->tx_bd_base;
|
|
else
|
|
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
|
|
|
|
while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
|
|
|
|
/* current queue is empty */
|
|
if (bdp == fep->cur_tx)
|
|
break;
|
|
|
|
if (fep->bufdesc_ex)
|
|
index = (struct bufdesc_ex *)bdp -
|
|
(struct bufdesc_ex *)fep->tx_bd_base;
|
|
else
|
|
index = bdp - fep->tx_bd_base;
|
|
|
|
dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
|
|
FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE);
|
|
bdp->cbd_bufaddr = 0;
|
|
|
|
skb = fep->tx_skbuff[index];
|
|
|
|
/* Check for errors. */
|
|
if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
|
|
BD_ENET_TX_RL | BD_ENET_TX_UN |
|
|
BD_ENET_TX_CSL)) {
|
|
ndev->stats.tx_errors++;
|
|
if (status & BD_ENET_TX_HB) /* No heartbeat */
|
|
ndev->stats.tx_heartbeat_errors++;
|
|
if (status & BD_ENET_TX_LC) /* Late collision */
|
|
ndev->stats.tx_window_errors++;
|
|
if (status & BD_ENET_TX_RL) /* Retrans limit */
|
|
ndev->stats.tx_aborted_errors++;
|
|
if (status & BD_ENET_TX_UN) /* Underrun */
|
|
ndev->stats.tx_fifo_errors++;
|
|
if (status & BD_ENET_TX_CSL) /* Carrier lost */
|
|
ndev->stats.tx_carrier_errors++;
|
|
} else {
|
|
ndev->stats.tx_packets++;
|
|
}
|
|
|
|
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) &&
|
|
fep->bufdesc_ex) {
|
|
struct skb_shared_hwtstamps shhwtstamps;
|
|
unsigned long flags;
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
|
|
memset(&shhwtstamps, 0, sizeof(shhwtstamps));
|
|
spin_lock_irqsave(&fep->tmreg_lock, flags);
|
|
shhwtstamps.hwtstamp = ns_to_ktime(
|
|
timecounter_cyc2time(&fep->tc, ebdp->ts));
|
|
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
|
|
skb_tstamp_tx(skb, &shhwtstamps);
|
|
}
|
|
|
|
if (status & BD_ENET_TX_READY)
|
|
netdev_err(ndev, "HEY! Enet xmit interrupt and TX_READY\n");
|
|
|
|
/* Deferred means some collisions occurred during transmit,
|
|
* but we eventually sent the packet OK.
|
|
*/
|
|
if (status & BD_ENET_TX_DEF)
|
|
ndev->stats.collisions++;
|
|
|
|
/* Free the sk buffer associated with this last transmit */
|
|
dev_kfree_skb_any(skb);
|
|
fep->tx_skbuff[index] = NULL;
|
|
|
|
fep->dirty_tx = bdp;
|
|
|
|
/* Update pointer to next buffer descriptor to be transmitted */
|
|
if (status & BD_ENET_TX_WRAP)
|
|
bdp = fep->tx_bd_base;
|
|
else
|
|
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
|
|
|
|
/* Since we have freed up a buffer, the ring is no longer full
|
|
*/
|
|
if (fep->dirty_tx != fep->cur_tx) {
|
|
if (netif_queue_stopped(ndev))
|
|
netif_wake_queue(ndev);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/* During a receive, the cur_rx points to the current incoming buffer.
|
|
* When we update through the ring, if the next incoming buffer has
|
|
* not been given to the system, we just set the empty indicator,
|
|
* effectively tossing the packet.
|
|
*/
|
|
static int
|
|
fec_enet_rx(struct net_device *ndev, int budget)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
struct bufdesc *bdp;
|
|
unsigned short status;
|
|
struct sk_buff *skb;
|
|
ushort pkt_len;
|
|
__u8 *data;
|
|
int pkt_received = 0;
|
|
|
|
#ifdef CONFIG_M532x
|
|
flush_cache_all();
|
|
#endif
|
|
|
|
/* First, grab all of the stats for the incoming packet.
|
|
* These get messed up if we get called due to a busy condition.
|
|
*/
|
|
bdp = fep->cur_rx;
|
|
|
|
while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
|
|
|
|
if (pkt_received >= budget)
|
|
break;
|
|
pkt_received++;
|
|
|
|
/* Since we have allocated space to hold a complete frame,
|
|
* the last indicator should be set.
|
|
*/
|
|
if ((status & BD_ENET_RX_LAST) == 0)
|
|
netdev_err(ndev, "rcv is not +last\n");
|
|
|
|
if (!fep->opened)
|
|
goto rx_processing_done;
|
|
|
|
/* Check for errors. */
|
|
if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
|
|
BD_ENET_RX_CR | BD_ENET_RX_OV)) {
|
|
ndev->stats.rx_errors++;
|
|
if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
|
|
/* Frame too long or too short. */
|
|
ndev->stats.rx_length_errors++;
|
|
}
|
|
if (status & BD_ENET_RX_NO) /* Frame alignment */
|
|
ndev->stats.rx_frame_errors++;
|
|
if (status & BD_ENET_RX_CR) /* CRC Error */
|
|
ndev->stats.rx_crc_errors++;
|
|
if (status & BD_ENET_RX_OV) /* FIFO overrun */
|
|
ndev->stats.rx_fifo_errors++;
|
|
}
|
|
|
|
/* Report late collisions as a frame error.
|
|
* On this error, the BD is closed, but we don't know what we
|
|
* have in the buffer. So, just drop this frame on the floor.
|
|
*/
|
|
if (status & BD_ENET_RX_CL) {
|
|
ndev->stats.rx_errors++;
|
|
ndev->stats.rx_frame_errors++;
|
|
goto rx_processing_done;
|
|
}
|
|
|
|
/* Process the incoming frame. */
|
|
ndev->stats.rx_packets++;
|
|
pkt_len = bdp->cbd_datlen;
|
|
ndev->stats.rx_bytes += pkt_len;
|
|
data = (__u8*)__va(bdp->cbd_bufaddr);
|
|
|
|
dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
|
|
FEC_ENET_TX_FRSIZE, DMA_FROM_DEVICE);
|
|
|
|
if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
|
|
swap_buffer(data, pkt_len);
|
|
|
|
/* This does 16 byte alignment, exactly what we need.
|
|
* The packet length includes FCS, but we don't want to
|
|
* include that when passing upstream as it messes up
|
|
* bridging applications.
|
|
*/
|
|
skb = netdev_alloc_skb(ndev, pkt_len - 4 + NET_IP_ALIGN);
|
|
|
|
if (unlikely(!skb)) {
|
|
ndev->stats.rx_dropped++;
|
|
} else {
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
skb_put(skb, pkt_len - 4); /* Make room */
|
|
skb_copy_to_linear_data(skb, data, pkt_len - 4);
|
|
skb->protocol = eth_type_trans(skb, ndev);
|
|
|
|
/* Get receive timestamp from the skb */
|
|
if (fep->hwts_rx_en && fep->bufdesc_ex) {
|
|
struct skb_shared_hwtstamps *shhwtstamps =
|
|
skb_hwtstamps(skb);
|
|
unsigned long flags;
|
|
struct bufdesc_ex *ebdp =
|
|
(struct bufdesc_ex *)bdp;
|
|
|
|
memset(shhwtstamps, 0, sizeof(*shhwtstamps));
|
|
|
|
spin_lock_irqsave(&fep->tmreg_lock, flags);
|
|
shhwtstamps->hwtstamp = ns_to_ktime(
|
|
timecounter_cyc2time(&fep->tc, ebdp->ts));
|
|
spin_unlock_irqrestore(&fep->tmreg_lock, flags);
|
|
}
|
|
|
|
if (fep->bufdesc_ex &&
|
|
(fep->csum_flags & FLAG_RX_CSUM_ENABLED)) {
|
|
struct bufdesc_ex *ebdp =
|
|
(struct bufdesc_ex *)bdp;
|
|
if (!(ebdp->cbd_esc & FLAG_RX_CSUM_ERROR)) {
|
|
/* don't check it */
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
} else {
|
|
skb_checksum_none_assert(skb);
|
|
}
|
|
}
|
|
|
|
if (!skb_defer_rx_timestamp(skb))
|
|
napi_gro_receive(&fep->napi, skb);
|
|
}
|
|
|
|
bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, data,
|
|
FEC_ENET_TX_FRSIZE, DMA_FROM_DEVICE);
|
|
rx_processing_done:
|
|
/* Clear the status flags for this buffer */
|
|
status &= ~BD_ENET_RX_STATS;
|
|
|
|
/* Mark the buffer empty */
|
|
status |= BD_ENET_RX_EMPTY;
|
|
bdp->cbd_sc = status;
|
|
|
|
if (fep->bufdesc_ex) {
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
|
|
ebdp->cbd_esc = BD_ENET_RX_INT;
|
|
ebdp->cbd_prot = 0;
|
|
ebdp->cbd_bdu = 0;
|
|
}
|
|
|
|
/* Update BD pointer to next entry */
|
|
if (status & BD_ENET_RX_WRAP)
|
|
bdp = fep->rx_bd_base;
|
|
else
|
|
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
|
|
/* Doing this here will keep the FEC running while we process
|
|
* incoming frames. On a heavily loaded network, we should be
|
|
* able to keep up at the expense of system resources.
|
|
*/
|
|
writel(0, fep->hwp + FEC_R_DES_ACTIVE);
|
|
}
|
|
fep->cur_rx = bdp;
|
|
|
|
return pkt_received;
|
|
}
|
|
|
|
static irqreturn_t
|
|
fec_enet_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *ndev = dev_id;
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
uint int_events;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
do {
|
|
int_events = readl(fep->hwp + FEC_IEVENT);
|
|
writel(int_events, fep->hwp + FEC_IEVENT);
|
|
|
|
if (int_events & (FEC_ENET_RXF | FEC_ENET_TXF)) {
|
|
ret = IRQ_HANDLED;
|
|
|
|
/* Disable the RX interrupt */
|
|
if (napi_schedule_prep(&fep->napi)) {
|
|
writel(FEC_RX_DISABLED_IMASK,
|
|
fep->hwp + FEC_IMASK);
|
|
__napi_schedule(&fep->napi);
|
|
}
|
|
}
|
|
|
|
if (int_events & FEC_ENET_MII) {
|
|
ret = IRQ_HANDLED;
|
|
complete(&fep->mdio_done);
|
|
}
|
|
} while (int_events);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fec_enet_rx_napi(struct napi_struct *napi, int budget)
|
|
{
|
|
struct net_device *ndev = napi->dev;
|
|
int pkts = fec_enet_rx(ndev, budget);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
fec_enet_tx(ndev);
|
|
|
|
if (pkts < budget) {
|
|
napi_complete(napi);
|
|
writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
|
|
}
|
|
return pkts;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
static void fec_get_mac(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
|
|
unsigned char *iap, tmpaddr[ETH_ALEN];
|
|
|
|
/*
|
|
* try to get mac address in following order:
|
|
*
|
|
* 1) module parameter via kernel command line in form
|
|
* fec.macaddr=0x00,0x04,0x9f,0x01,0x30,0xe0
|
|
*/
|
|
iap = macaddr;
|
|
|
|
/*
|
|
* 2) from device tree data
|
|
*/
|
|
if (!is_valid_ether_addr(iap)) {
|
|
struct device_node *np = fep->pdev->dev.of_node;
|
|
if (np) {
|
|
const char *mac = of_get_mac_address(np);
|
|
if (mac)
|
|
iap = (unsigned char *) mac;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* 3) from flash or fuse (via platform data)
|
|
*/
|
|
if (!is_valid_ether_addr(iap)) {
|
|
#ifdef CONFIG_M5272
|
|
if (FEC_FLASHMAC)
|
|
iap = (unsigned char *)FEC_FLASHMAC;
|
|
#else
|
|
if (pdata)
|
|
iap = (unsigned char *)&pdata->mac;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* 4) FEC mac registers set by bootloader
|
|
*/
|
|
if (!is_valid_ether_addr(iap)) {
|
|
*((unsigned long *) &tmpaddr[0]) =
|
|
be32_to_cpu(readl(fep->hwp + FEC_ADDR_LOW));
|
|
*((unsigned short *) &tmpaddr[4]) =
|
|
be16_to_cpu(readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
|
|
iap = &tmpaddr[0];
|
|
}
|
|
|
|
memcpy(ndev->dev_addr, iap, ETH_ALEN);
|
|
|
|
/* Adjust MAC if using macaddr */
|
|
if (iap == macaddr)
|
|
ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->dev_id;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Phy section
|
|
*/
|
|
static void fec_enet_adjust_link(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct phy_device *phy_dev = fep->phy_dev;
|
|
int status_change = 0;
|
|
|
|
/* Prevent a state halted on mii error */
|
|
if (fep->mii_timeout && phy_dev->state == PHY_HALTED) {
|
|
phy_dev->state = PHY_RESUMING;
|
|
return;
|
|
}
|
|
|
|
if (phy_dev->link) {
|
|
if (!fep->link) {
|
|
fep->link = phy_dev->link;
|
|
status_change = 1;
|
|
}
|
|
|
|
if (fep->full_duplex != phy_dev->duplex)
|
|
status_change = 1;
|
|
|
|
if (phy_dev->speed != fep->speed) {
|
|
fep->speed = phy_dev->speed;
|
|
status_change = 1;
|
|
}
|
|
|
|
/* if any of the above changed restart the FEC */
|
|
if (status_change)
|
|
fec_restart(ndev, phy_dev->duplex);
|
|
} else {
|
|
if (fep->link) {
|
|
fec_stop(ndev);
|
|
fep->link = phy_dev->link;
|
|
status_change = 1;
|
|
}
|
|
}
|
|
|
|
if (status_change)
|
|
phy_print_status(phy_dev);
|
|
}
|
|
|
|
static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
|
|
{
|
|
struct fec_enet_private *fep = bus->priv;
|
|
unsigned long time_left;
|
|
|
|
fep->mii_timeout = 0;
|
|
init_completion(&fep->mdio_done);
|
|
|
|
/* start a read op */
|
|
writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
|
|
FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
|
|
FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
|
|
|
|
/* wait for end of transfer */
|
|
time_left = wait_for_completion_timeout(&fep->mdio_done,
|
|
usecs_to_jiffies(FEC_MII_TIMEOUT));
|
|
if (time_left == 0) {
|
|
fep->mii_timeout = 1;
|
|
netdev_err(fep->netdev, "MDIO read timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* return value */
|
|
return FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA));
|
|
}
|
|
|
|
static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
|
|
u16 value)
|
|
{
|
|
struct fec_enet_private *fep = bus->priv;
|
|
unsigned long time_left;
|
|
|
|
fep->mii_timeout = 0;
|
|
init_completion(&fep->mdio_done);
|
|
|
|
/* start a write op */
|
|
writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
|
|
FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
|
|
FEC_MMFR_TA | FEC_MMFR_DATA(value),
|
|
fep->hwp + FEC_MII_DATA);
|
|
|
|
/* wait for end of transfer */
|
|
time_left = wait_for_completion_timeout(&fep->mdio_done,
|
|
usecs_to_jiffies(FEC_MII_TIMEOUT));
|
|
if (time_left == 0) {
|
|
fep->mii_timeout = 1;
|
|
netdev_err(fep->netdev, "MDIO write timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fec_enet_mdio_reset(struct mii_bus *bus)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int fec_enet_mii_probe(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
struct phy_device *phy_dev = NULL;
|
|
char mdio_bus_id[MII_BUS_ID_SIZE];
|
|
char phy_name[MII_BUS_ID_SIZE + 3];
|
|
int phy_id;
|
|
int dev_id = fep->dev_id;
|
|
|
|
fep->phy_dev = NULL;
|
|
|
|
/* check for attached phy */
|
|
for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
|
|
if ((fep->mii_bus->phy_mask & (1 << phy_id)))
|
|
continue;
|
|
if (fep->mii_bus->phy_map[phy_id] == NULL)
|
|
continue;
|
|
if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
|
|
continue;
|
|
if (dev_id--)
|
|
continue;
|
|
strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
|
|
break;
|
|
}
|
|
|
|
if (phy_id >= PHY_MAX_ADDR) {
|
|
netdev_info(ndev, "no PHY, assuming direct connection to switch\n");
|
|
strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE);
|
|
phy_id = 0;
|
|
}
|
|
|
|
snprintf(phy_name, sizeof(phy_name), PHY_ID_FMT, mdio_bus_id, phy_id);
|
|
phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link,
|
|
fep->phy_interface);
|
|
if (IS_ERR(phy_dev)) {
|
|
netdev_err(ndev, "could not attach to PHY\n");
|
|
return PTR_ERR(phy_dev);
|
|
}
|
|
|
|
/* mask with MAC supported features */
|
|
if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT) {
|
|
phy_dev->supported &= PHY_GBIT_FEATURES;
|
|
phy_dev->supported |= SUPPORTED_Pause;
|
|
}
|
|
else
|
|
phy_dev->supported &= PHY_BASIC_FEATURES;
|
|
|
|
phy_dev->advertising = phy_dev->supported;
|
|
|
|
fep->phy_dev = phy_dev;
|
|
fep->link = 0;
|
|
fep->full_duplex = 0;
|
|
|
|
netdev_info(ndev, "Freescale FEC PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
|
|
fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
|
|
fep->phy_dev->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fec_enet_mii_init(struct platform_device *pdev)
|
|
{
|
|
static struct mii_bus *fec0_mii_bus;
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
int err = -ENXIO, i;
|
|
|
|
/*
|
|
* The dual fec interfaces are not equivalent with enet-mac.
|
|
* Here are the differences:
|
|
*
|
|
* - fec0 supports MII & RMII modes while fec1 only supports RMII
|
|
* - fec0 acts as the 1588 time master while fec1 is slave
|
|
* - external phys can only be configured by fec0
|
|
*
|
|
* That is to say fec1 can not work independently. It only works
|
|
* when fec0 is working. The reason behind this design is that the
|
|
* second interface is added primarily for Switch mode.
|
|
*
|
|
* Because of the last point above, both phys are attached on fec0
|
|
* mdio interface in board design, and need to be configured by
|
|
* fec0 mii_bus.
|
|
*/
|
|
if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && fep->dev_id > 0) {
|
|
/* fec1 uses fec0 mii_bus */
|
|
if (mii_cnt && fec0_mii_bus) {
|
|
fep->mii_bus = fec0_mii_bus;
|
|
mii_cnt++;
|
|
return 0;
|
|
}
|
|
return -ENOENT;
|
|
}
|
|
|
|
fep->mii_timeout = 0;
|
|
|
|
/*
|
|
* Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed)
|
|
*
|
|
* The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while
|
|
* for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'. The i.MX28
|
|
* Reference Manual has an error on this, and gets fixed on i.MX6Q
|
|
* document.
|
|
*/
|
|
fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ahb), 5000000);
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
|
|
fep->phy_speed--;
|
|
fep->phy_speed <<= 1;
|
|
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
|
|
|
|
fep->mii_bus = mdiobus_alloc();
|
|
if (fep->mii_bus == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
fep->mii_bus->name = "fec_enet_mii_bus";
|
|
fep->mii_bus->read = fec_enet_mdio_read;
|
|
fep->mii_bus->write = fec_enet_mdio_write;
|
|
fep->mii_bus->reset = fec_enet_mdio_reset;
|
|
snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
|
|
pdev->name, fep->dev_id + 1);
|
|
fep->mii_bus->priv = fep;
|
|
fep->mii_bus->parent = &pdev->dev;
|
|
|
|
fep->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
|
|
if (!fep->mii_bus->irq) {
|
|
err = -ENOMEM;
|
|
goto err_out_free_mdiobus;
|
|
}
|
|
|
|
for (i = 0; i < PHY_MAX_ADDR; i++)
|
|
fep->mii_bus->irq[i] = PHY_POLL;
|
|
|
|
if (mdiobus_register(fep->mii_bus))
|
|
goto err_out_free_mdio_irq;
|
|
|
|
mii_cnt++;
|
|
|
|
/* save fec0 mii_bus */
|
|
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
|
|
fec0_mii_bus = fep->mii_bus;
|
|
|
|
return 0;
|
|
|
|
err_out_free_mdio_irq:
|
|
kfree(fep->mii_bus->irq);
|
|
err_out_free_mdiobus:
|
|
mdiobus_free(fep->mii_bus);
|
|
err_out:
|
|
return err;
|
|
}
|
|
|
|
static void fec_enet_mii_remove(struct fec_enet_private *fep)
|
|
{
|
|
if (--mii_cnt == 0) {
|
|
mdiobus_unregister(fep->mii_bus);
|
|
kfree(fep->mii_bus->irq);
|
|
mdiobus_free(fep->mii_bus);
|
|
}
|
|
}
|
|
|
|
static int fec_enet_get_settings(struct net_device *ndev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct phy_device *phydev = fep->phy_dev;
|
|
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
return phy_ethtool_gset(phydev, cmd);
|
|
}
|
|
|
|
static int fec_enet_set_settings(struct net_device *ndev,
|
|
struct ethtool_cmd *cmd)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct phy_device *phydev = fep->phy_dev;
|
|
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
return phy_ethtool_sset(phydev, cmd);
|
|
}
|
|
|
|
static void fec_enet_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
strlcpy(info->driver, fep->pdev->dev.driver->name,
|
|
sizeof(info->driver));
|
|
strlcpy(info->version, "Revision: 1.0", sizeof(info->version));
|
|
strlcpy(info->bus_info, dev_name(&ndev->dev), sizeof(info->bus_info));
|
|
}
|
|
|
|
static int fec_enet_get_ts_info(struct net_device *ndev,
|
|
struct ethtool_ts_info *info)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
if (fep->bufdesc_ex) {
|
|
|
|
info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
|
|
SOF_TIMESTAMPING_RX_SOFTWARE |
|
|
SOF_TIMESTAMPING_SOFTWARE |
|
|
SOF_TIMESTAMPING_TX_HARDWARE |
|
|
SOF_TIMESTAMPING_RX_HARDWARE |
|
|
SOF_TIMESTAMPING_RAW_HARDWARE;
|
|
if (fep->ptp_clock)
|
|
info->phc_index = ptp_clock_index(fep->ptp_clock);
|
|
else
|
|
info->phc_index = -1;
|
|
|
|
info->tx_types = (1 << HWTSTAMP_TX_OFF) |
|
|
(1 << HWTSTAMP_TX_ON);
|
|
|
|
info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
|
|
(1 << HWTSTAMP_FILTER_ALL);
|
|
return 0;
|
|
} else {
|
|
return ethtool_op_get_ts_info(ndev, info);
|
|
}
|
|
}
|
|
|
|
static void fec_enet_get_pauseparam(struct net_device *ndev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
pause->autoneg = (fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) != 0;
|
|
pause->tx_pause = (fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) != 0;
|
|
pause->rx_pause = pause->tx_pause;
|
|
}
|
|
|
|
static int fec_enet_set_pauseparam(struct net_device *ndev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
if (pause->tx_pause != pause->rx_pause) {
|
|
netdev_info(ndev,
|
|
"hardware only support enable/disable both tx and rx");
|
|
return -EINVAL;
|
|
}
|
|
|
|
fep->pause_flag = 0;
|
|
|
|
/* tx pause must be same as rx pause */
|
|
fep->pause_flag |= pause->rx_pause ? FEC_PAUSE_FLAG_ENABLE : 0;
|
|
fep->pause_flag |= pause->autoneg ? FEC_PAUSE_FLAG_AUTONEG : 0;
|
|
|
|
if (pause->rx_pause || pause->autoneg) {
|
|
fep->phy_dev->supported |= ADVERTISED_Pause;
|
|
fep->phy_dev->advertising |= ADVERTISED_Pause;
|
|
} else {
|
|
fep->phy_dev->supported &= ~ADVERTISED_Pause;
|
|
fep->phy_dev->advertising &= ~ADVERTISED_Pause;
|
|
}
|
|
|
|
if (pause->autoneg) {
|
|
if (netif_running(ndev))
|
|
fec_stop(ndev);
|
|
phy_start_aneg(fep->phy_dev);
|
|
}
|
|
if (netif_running(ndev))
|
|
fec_restart(ndev, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops fec_enet_ethtool_ops = {
|
|
.get_pauseparam = fec_enet_get_pauseparam,
|
|
.set_pauseparam = fec_enet_set_pauseparam,
|
|
.get_settings = fec_enet_get_settings,
|
|
.set_settings = fec_enet_set_settings,
|
|
.get_drvinfo = fec_enet_get_drvinfo,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_ts_info = fec_enet_get_ts_info,
|
|
};
|
|
|
|
static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct phy_device *phydev = fep->phy_dev;
|
|
|
|
if (!netif_running(ndev))
|
|
return -EINVAL;
|
|
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
if (cmd == SIOCSHWTSTAMP && fep->bufdesc_ex)
|
|
return fec_ptp_ioctl(ndev, rq, cmd);
|
|
|
|
return phy_mii_ioctl(phydev, rq, cmd);
|
|
}
|
|
|
|
static void fec_enet_free_buffers(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
unsigned int i;
|
|
struct sk_buff *skb;
|
|
struct bufdesc *bdp;
|
|
|
|
bdp = fep->rx_bd_base;
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
skb = fep->rx_skbuff[i];
|
|
|
|
if (bdp->cbd_bufaddr)
|
|
dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
|
|
FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
|
|
if (skb)
|
|
dev_kfree_skb(skb);
|
|
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
|
|
}
|
|
|
|
bdp = fep->tx_bd_base;
|
|
for (i = 0; i < TX_RING_SIZE; i++)
|
|
kfree(fep->tx_bounce[i]);
|
|
}
|
|
|
|
static int fec_enet_alloc_buffers(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
unsigned int i;
|
|
struct sk_buff *skb;
|
|
struct bufdesc *bdp;
|
|
|
|
bdp = fep->rx_bd_base;
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
skb = netdev_alloc_skb(ndev, FEC_ENET_RX_FRSIZE);
|
|
if (!skb) {
|
|
fec_enet_free_buffers(ndev);
|
|
return -ENOMEM;
|
|
}
|
|
fep->rx_skbuff[i] = skb;
|
|
|
|
bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, skb->data,
|
|
FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
|
|
bdp->cbd_sc = BD_ENET_RX_EMPTY;
|
|
|
|
if (fep->bufdesc_ex) {
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
ebdp->cbd_esc = BD_ENET_RX_INT;
|
|
}
|
|
|
|
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
|
|
}
|
|
|
|
/* Set the last buffer to wrap. */
|
|
bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
|
|
bdp->cbd_sc |= BD_SC_WRAP;
|
|
|
|
bdp = fep->tx_bd_base;
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
fep->tx_bounce[i] = kmalloc(FEC_ENET_TX_FRSIZE, GFP_KERNEL);
|
|
|
|
bdp->cbd_sc = 0;
|
|
bdp->cbd_bufaddr = 0;
|
|
|
|
if (fep->bufdesc_ex) {
|
|
struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp;
|
|
ebdp->cbd_esc = BD_ENET_TX_INT;
|
|
}
|
|
|
|
bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
|
|
}
|
|
|
|
/* Set the last buffer to wrap. */
|
|
bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
|
|
bdp->cbd_sc |= BD_SC_WRAP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
fec_enet_open(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
int ret;
|
|
|
|
napi_enable(&fep->napi);
|
|
|
|
/* I should reset the ring buffers here, but I don't yet know
|
|
* a simple way to do that.
|
|
*/
|
|
|
|
ret = fec_enet_alloc_buffers(ndev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Probe and connect to PHY when open the interface */
|
|
ret = fec_enet_mii_probe(ndev);
|
|
if (ret) {
|
|
fec_enet_free_buffers(ndev);
|
|
return ret;
|
|
}
|
|
phy_start(fep->phy_dev);
|
|
netif_start_queue(ndev);
|
|
fep->opened = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
fec_enet_close(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
/* Don't know what to do yet. */
|
|
napi_disable(&fep->napi);
|
|
fep->opened = 0;
|
|
netif_stop_queue(ndev);
|
|
fec_stop(ndev);
|
|
|
|
if (fep->phy_dev) {
|
|
phy_stop(fep->phy_dev);
|
|
phy_disconnect(fep->phy_dev);
|
|
}
|
|
|
|
fec_enet_free_buffers(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor.
|
|
* Skeleton taken from sunlance driver.
|
|
* The CPM Ethernet implementation allows Multicast as well as individual
|
|
* MAC address filtering. Some of the drivers check to make sure it is
|
|
* a group multicast address, and discard those that are not. I guess I
|
|
* will do the same for now, but just remove the test if you want
|
|
* individual filtering as well (do the upper net layers want or support
|
|
* this kind of feature?).
|
|
*/
|
|
|
|
#define HASH_BITS 6 /* #bits in hash */
|
|
#define CRC32_POLY 0xEDB88320
|
|
|
|
static void set_multicast_list(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct netdev_hw_addr *ha;
|
|
unsigned int i, bit, data, crc, tmp;
|
|
unsigned char hash;
|
|
|
|
if (ndev->flags & IFF_PROMISC) {
|
|
tmp = readl(fep->hwp + FEC_R_CNTRL);
|
|
tmp |= 0x8;
|
|
writel(tmp, fep->hwp + FEC_R_CNTRL);
|
|
return;
|
|
}
|
|
|
|
tmp = readl(fep->hwp + FEC_R_CNTRL);
|
|
tmp &= ~0x8;
|
|
writel(tmp, fep->hwp + FEC_R_CNTRL);
|
|
|
|
if (ndev->flags & IFF_ALLMULTI) {
|
|
/* Catch all multicast addresses, so set the
|
|
* filter to all 1's
|
|
*/
|
|
writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
|
|
writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Clear filter and add the addresses in hash register
|
|
*/
|
|
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
|
|
writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
|
|
|
|
netdev_for_each_mc_addr(ha, ndev) {
|
|
/* calculate crc32 value of mac address */
|
|
crc = 0xffffffff;
|
|
|
|
for (i = 0; i < ndev->addr_len; i++) {
|
|
data = ha->addr[i];
|
|
for (bit = 0; bit < 8; bit++, data >>= 1) {
|
|
crc = (crc >> 1) ^
|
|
(((crc ^ data) & 1) ? CRC32_POLY : 0);
|
|
}
|
|
}
|
|
|
|
/* only upper 6 bits (HASH_BITS) are used
|
|
* which point to specific bit in he hash registers
|
|
*/
|
|
hash = (crc >> (32 - HASH_BITS)) & 0x3f;
|
|
|
|
if (hash > 31) {
|
|
tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
|
|
tmp |= 1 << (hash - 32);
|
|
writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH);
|
|
} else {
|
|
tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW);
|
|
tmp |= 1 << hash;
|
|
writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Set a MAC change in hardware. */
|
|
static int
|
|
fec_set_mac_address(struct net_device *ndev, void *p)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
struct sockaddr *addr = p;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
|
|
|
|
writel(ndev->dev_addr[3] | (ndev->dev_addr[2] << 8) |
|
|
(ndev->dev_addr[1] << 16) | (ndev->dev_addr[0] << 24),
|
|
fep->hwp + FEC_ADDR_LOW);
|
|
writel((ndev->dev_addr[5] << 16) | (ndev->dev_addr[4] << 24),
|
|
fep->hwp + FEC_ADDR_HIGH);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/**
|
|
* fec_poll_controller - FEC Poll controller function
|
|
* @dev: The FEC network adapter
|
|
*
|
|
* Polled functionality used by netconsole and others in non interrupt mode
|
|
*
|
|
*/
|
|
static void fec_poll_controller(struct net_device *dev)
|
|
{
|
|
int i;
|
|
struct fec_enet_private *fep = netdev_priv(dev);
|
|
|
|
for (i = 0; i < FEC_IRQ_NUM; i++) {
|
|
if (fep->irq[i] > 0) {
|
|
disable_irq(fep->irq[i]);
|
|
fec_enet_interrupt(fep->irq[i], dev);
|
|
enable_irq(fep->irq[i]);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int fec_set_features(struct net_device *netdev,
|
|
netdev_features_t features)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(netdev);
|
|
netdev_features_t changed = features ^ netdev->features;
|
|
|
|
netdev->features = features;
|
|
|
|
/* Receive checksum has been changed */
|
|
if (changed & NETIF_F_RXCSUM) {
|
|
if (features & NETIF_F_RXCSUM)
|
|
fep->csum_flags |= FLAG_RX_CSUM_ENABLED;
|
|
else
|
|
fep->csum_flags &= ~FLAG_RX_CSUM_ENABLED;
|
|
|
|
if (netif_running(netdev)) {
|
|
fec_stop(netdev);
|
|
fec_restart(netdev, fep->phy_dev->duplex);
|
|
netif_wake_queue(netdev);
|
|
} else {
|
|
fec_restart(netdev, fep->phy_dev->duplex);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops fec_netdev_ops = {
|
|
.ndo_open = fec_enet_open,
|
|
.ndo_stop = fec_enet_close,
|
|
.ndo_start_xmit = fec_enet_start_xmit,
|
|
.ndo_set_rx_mode = set_multicast_list,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_tx_timeout = fec_timeout,
|
|
.ndo_set_mac_address = fec_set_mac_address,
|
|
.ndo_do_ioctl = fec_enet_ioctl,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = fec_poll_controller,
|
|
#endif
|
|
.ndo_set_features = fec_set_features,
|
|
};
|
|
|
|
/*
|
|
* XXX: We need to clean up on failure exits here.
|
|
*
|
|
*/
|
|
static int fec_enet_init(struct net_device *ndev)
|
|
{
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
const struct platform_device_id *id_entry =
|
|
platform_get_device_id(fep->pdev);
|
|
struct bufdesc *cbd_base;
|
|
|
|
/* Allocate memory for buffer descriptors. */
|
|
cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
|
|
GFP_KERNEL);
|
|
if (!cbd_base)
|
|
return -ENOMEM;
|
|
|
|
memset(cbd_base, 0, PAGE_SIZE);
|
|
|
|
fep->netdev = ndev;
|
|
|
|
/* Get the Ethernet address */
|
|
fec_get_mac(ndev);
|
|
|
|
/* Set receive and transmit descriptor base. */
|
|
fep->rx_bd_base = cbd_base;
|
|
if (fep->bufdesc_ex)
|
|
fep->tx_bd_base = (struct bufdesc *)
|
|
(((struct bufdesc_ex *)cbd_base) + RX_RING_SIZE);
|
|
else
|
|
fep->tx_bd_base = cbd_base + RX_RING_SIZE;
|
|
|
|
/* The FEC Ethernet specific entries in the device structure */
|
|
ndev->watchdog_timeo = TX_TIMEOUT;
|
|
ndev->netdev_ops = &fec_netdev_ops;
|
|
ndev->ethtool_ops = &fec_enet_ethtool_ops;
|
|
|
|
writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK);
|
|
netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT);
|
|
|
|
if (id_entry->driver_data & FEC_QUIRK_HAS_CSUM) {
|
|
/* enable hw accelerator */
|
|
ndev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
|
|
| NETIF_F_RXCSUM);
|
|
ndev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
|
|
| NETIF_F_RXCSUM);
|
|
fep->csum_flags |= FLAG_RX_CSUM_ENABLED;
|
|
}
|
|
|
|
fec_restart(ndev, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static void fec_reset_phy(struct platform_device *pdev)
|
|
{
|
|
int err, phy_reset;
|
|
int msec = 1;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
|
|
if (!np)
|
|
return;
|
|
|
|
of_property_read_u32(np, "phy-reset-duration", &msec);
|
|
/* A sane reset duration should not be longer than 1s */
|
|
if (msec > 1000)
|
|
msec = 1;
|
|
|
|
phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
|
|
if (!gpio_is_valid(phy_reset))
|
|
return;
|
|
|
|
err = devm_gpio_request_one(&pdev->dev, phy_reset,
|
|
GPIOF_OUT_INIT_LOW, "phy-reset");
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
|
|
return;
|
|
}
|
|
msleep(msec);
|
|
gpio_set_value(phy_reset, 1);
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static void fec_reset_phy(struct platform_device *pdev)
|
|
{
|
|
/*
|
|
* In case of platform probe, the reset has been done
|
|
* by machine code.
|
|
*/
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int
|
|
fec_probe(struct platform_device *pdev)
|
|
{
|
|
struct fec_enet_private *fep;
|
|
struct fec_platform_data *pdata;
|
|
struct net_device *ndev;
|
|
int i, irq, ret = 0;
|
|
struct resource *r;
|
|
const struct of_device_id *of_id;
|
|
static int dev_id;
|
|
struct pinctrl *pinctrl;
|
|
struct regulator *reg_phy;
|
|
|
|
of_id = of_match_device(fec_dt_ids, &pdev->dev);
|
|
if (of_id)
|
|
pdev->id_entry = of_id->data;
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!r)
|
|
return -ENXIO;
|
|
|
|
/* Init network device */
|
|
ndev = alloc_etherdev(sizeof(struct fec_enet_private));
|
|
if (!ndev)
|
|
return -ENOMEM;
|
|
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
|
|
/* setup board info structure */
|
|
fep = netdev_priv(ndev);
|
|
|
|
/* default enable pause frame auto negotiation */
|
|
if (pdev->id_entry &&
|
|
(pdev->id_entry->driver_data & FEC_QUIRK_HAS_GBIT))
|
|
fep->pause_flag |= FEC_PAUSE_FLAG_AUTONEG;
|
|
|
|
fep->hwp = devm_request_and_ioremap(&pdev->dev, r);
|
|
fep->pdev = pdev;
|
|
fep->dev_id = dev_id++;
|
|
|
|
fep->bufdesc_ex = 0;
|
|
|
|
if (!fep->hwp) {
|
|
ret = -ENOMEM;
|
|
goto failed_ioremap;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ndev);
|
|
|
|
ret = of_get_phy_mode(pdev->dev.of_node);
|
|
if (ret < 0) {
|
|
pdata = pdev->dev.platform_data;
|
|
if (pdata)
|
|
fep->phy_interface = pdata->phy;
|
|
else
|
|
fep->phy_interface = PHY_INTERFACE_MODE_MII;
|
|
} else {
|
|
fep->phy_interface = ret;
|
|
}
|
|
|
|
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
|
|
if (IS_ERR(pinctrl)) {
|
|
ret = PTR_ERR(pinctrl);
|
|
goto failed_pin;
|
|
}
|
|
|
|
fep->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
|
if (IS_ERR(fep->clk_ipg)) {
|
|
ret = PTR_ERR(fep->clk_ipg);
|
|
goto failed_clk;
|
|
}
|
|
|
|
fep->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
|
|
if (IS_ERR(fep->clk_ahb)) {
|
|
ret = PTR_ERR(fep->clk_ahb);
|
|
goto failed_clk;
|
|
}
|
|
|
|
/* enet_out is optional, depends on board */
|
|
fep->clk_enet_out = devm_clk_get(&pdev->dev, "enet_out");
|
|
if (IS_ERR(fep->clk_enet_out))
|
|
fep->clk_enet_out = NULL;
|
|
|
|
fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
|
|
fep->bufdesc_ex =
|
|
pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX;
|
|
if (IS_ERR(fep->clk_ptp)) {
|
|
fep->clk_ptp = NULL;
|
|
fep->bufdesc_ex = 0;
|
|
}
|
|
|
|
clk_prepare_enable(fep->clk_ahb);
|
|
clk_prepare_enable(fep->clk_ipg);
|
|
clk_prepare_enable(fep->clk_enet_out);
|
|
clk_prepare_enable(fep->clk_ptp);
|
|
|
|
reg_phy = devm_regulator_get(&pdev->dev, "phy");
|
|
if (!IS_ERR(reg_phy)) {
|
|
ret = regulator_enable(reg_phy);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to enable phy regulator: %d\n", ret);
|
|
goto failed_regulator;
|
|
}
|
|
}
|
|
|
|
fec_reset_phy(pdev);
|
|
|
|
if (fep->bufdesc_ex)
|
|
fec_ptp_init(ndev, pdev);
|
|
|
|
ret = fec_enet_init(ndev);
|
|
if (ret)
|
|
goto failed_init;
|
|
|
|
for (i = 0; i < FEC_IRQ_NUM; i++) {
|
|
irq = platform_get_irq(pdev, i);
|
|
if (irq < 0) {
|
|
if (i)
|
|
break;
|
|
ret = irq;
|
|
goto failed_irq;
|
|
}
|
|
ret = request_irq(irq, fec_enet_interrupt, IRQF_DISABLED, pdev->name, ndev);
|
|
if (ret) {
|
|
while (--i >= 0) {
|
|
irq = platform_get_irq(pdev, i);
|
|
free_irq(irq, ndev);
|
|
}
|
|
goto failed_irq;
|
|
}
|
|
}
|
|
|
|
ret = fec_enet_mii_init(pdev);
|
|
if (ret)
|
|
goto failed_mii_init;
|
|
|
|
/* Carrier starts down, phylib will bring it up */
|
|
netif_carrier_off(ndev);
|
|
|
|
ret = register_netdev(ndev);
|
|
if (ret)
|
|
goto failed_register;
|
|
|
|
if (fep->bufdesc_ex && fep->ptp_clock)
|
|
netdev_info(ndev, "registered PHC device %d\n", fep->dev_id);
|
|
|
|
INIT_DELAYED_WORK(&(fep->delay_work.delay_work), fec_enet_work);
|
|
return 0;
|
|
|
|
failed_register:
|
|
fec_enet_mii_remove(fep);
|
|
failed_mii_init:
|
|
failed_init:
|
|
for (i = 0; i < FEC_IRQ_NUM; i++) {
|
|
irq = platform_get_irq(pdev, i);
|
|
if (irq > 0)
|
|
free_irq(irq, ndev);
|
|
}
|
|
failed_irq:
|
|
failed_regulator:
|
|
clk_disable_unprepare(fep->clk_ahb);
|
|
clk_disable_unprepare(fep->clk_ipg);
|
|
clk_disable_unprepare(fep->clk_enet_out);
|
|
clk_disable_unprepare(fep->clk_ptp);
|
|
failed_pin:
|
|
failed_clk:
|
|
failed_ioremap:
|
|
free_netdev(ndev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
fec_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
int i;
|
|
|
|
cancel_delayed_work_sync(&(fep->delay_work.delay_work));
|
|
unregister_netdev(ndev);
|
|
fec_enet_mii_remove(fep);
|
|
del_timer_sync(&fep->time_keep);
|
|
clk_disable_unprepare(fep->clk_ptp);
|
|
if (fep->ptp_clock)
|
|
ptp_clock_unregister(fep->ptp_clock);
|
|
clk_disable_unprepare(fep->clk_enet_out);
|
|
clk_disable_unprepare(fep->clk_ahb);
|
|
clk_disable_unprepare(fep->clk_ipg);
|
|
for (i = 0; i < FEC_IRQ_NUM; i++) {
|
|
int irq = platform_get_irq(pdev, i);
|
|
if (irq > 0)
|
|
free_irq(irq, ndev);
|
|
}
|
|
free_netdev(ndev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int
|
|
fec_suspend(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
if (netif_running(ndev)) {
|
|
fec_stop(ndev);
|
|
netif_device_detach(ndev);
|
|
}
|
|
clk_disable_unprepare(fep->clk_enet_out);
|
|
clk_disable_unprepare(fep->clk_ahb);
|
|
clk_disable_unprepare(fep->clk_ipg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
fec_resume(struct device *dev)
|
|
{
|
|
struct net_device *ndev = dev_get_drvdata(dev);
|
|
struct fec_enet_private *fep = netdev_priv(ndev);
|
|
|
|
clk_prepare_enable(fep->clk_enet_out);
|
|
clk_prepare_enable(fep->clk_ahb);
|
|
clk_prepare_enable(fep->clk_ipg);
|
|
if (netif_running(ndev)) {
|
|
fec_restart(ndev, fep->full_duplex);
|
|
netif_device_attach(ndev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(fec_pm_ops, fec_suspend, fec_resume);
|
|
|
|
static struct platform_driver fec_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.pm = &fec_pm_ops,
|
|
.of_match_table = fec_dt_ids,
|
|
},
|
|
.id_table = fec_devtype,
|
|
.probe = fec_probe,
|
|
.remove = fec_drv_remove,
|
|
};
|
|
|
|
module_platform_driver(fec_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|