mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 05:02:12 +00:00
1c3726ad30
mac53c94 has no limitations on crossing pages for segments. Just make the 65535 byte segment size limit explicit, even if it matches the current block layer limit. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
572 lines
15 KiB
C
572 lines
15 KiB
C
/*
|
|
* SCSI low-level driver for the 53c94 SCSI bus adaptor found
|
|
* on Power Macintosh computers, controlling the external SCSI chain.
|
|
* We assume the 53c94 is connected to a DBDMA (descriptor-based DMA)
|
|
* controller.
|
|
*
|
|
* Paul Mackerras, August 1996.
|
|
* Copyright (C) 1996 Paul Mackerras.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/dbdma.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/macio.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include "mac53c94.h"
|
|
|
|
enum fsc_phase {
|
|
idle,
|
|
selecting,
|
|
dataing,
|
|
completing,
|
|
busfreeing,
|
|
};
|
|
|
|
struct fsc_state {
|
|
struct mac53c94_regs __iomem *regs;
|
|
int intr;
|
|
struct dbdma_regs __iomem *dma;
|
|
int dmaintr;
|
|
int clk_freq;
|
|
struct Scsi_Host *host;
|
|
struct scsi_cmnd *request_q;
|
|
struct scsi_cmnd *request_qtail;
|
|
struct scsi_cmnd *current_req; /* req we're currently working on */
|
|
enum fsc_phase phase; /* what we're currently trying to do */
|
|
struct dbdma_cmd *dma_cmds; /* space for dbdma commands, aligned */
|
|
void *dma_cmd_space;
|
|
struct pci_dev *pdev;
|
|
dma_addr_t dma_addr;
|
|
struct macio_dev *mdev;
|
|
};
|
|
|
|
static void mac53c94_init(struct fsc_state *);
|
|
static void mac53c94_start(struct fsc_state *);
|
|
static void mac53c94_interrupt(int, void *);
|
|
static irqreturn_t do_mac53c94_interrupt(int, void *);
|
|
static void cmd_done(struct fsc_state *, int result);
|
|
static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *);
|
|
|
|
|
|
static int mac53c94_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
|
|
{
|
|
struct fsc_state *state;
|
|
|
|
#if 0
|
|
if (cmd->sc_data_direction == DMA_TO_DEVICE) {
|
|
int i;
|
|
printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
|
|
for (i = 0; i < cmd->cmd_len; ++i)
|
|
printk(KERN_CONT " %.2x", cmd->cmnd[i]);
|
|
printk(KERN_CONT "\n");
|
|
printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
|
|
scsi_sg_count(cmd), scsi_bufflen(cmd), scsi_sglist(cmd));
|
|
}
|
|
#endif
|
|
|
|
cmd->scsi_done = done;
|
|
cmd->host_scribble = NULL;
|
|
|
|
state = (struct fsc_state *) cmd->device->host->hostdata;
|
|
|
|
if (state->request_q == NULL)
|
|
state->request_q = cmd;
|
|
else
|
|
state->request_qtail->host_scribble = (void *) cmd;
|
|
state->request_qtail = cmd;
|
|
|
|
if (state->phase == idle)
|
|
mac53c94_start(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEF_SCSI_QCMD(mac53c94_queue)
|
|
|
|
static int mac53c94_host_reset(struct scsi_cmnd *cmd)
|
|
{
|
|
struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
|
|
struct mac53c94_regs __iomem *regs = state->regs;
|
|
struct dbdma_regs __iomem *dma = state->dma;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(cmd->device->host->host_lock, flags);
|
|
|
|
writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
|
|
writeb(CMD_SCSI_RESET, ®s->command); /* assert RST */
|
|
udelay(100); /* leave it on for a while (>= 25us) */
|
|
writeb(CMD_RESET, ®s->command);
|
|
udelay(20);
|
|
mac53c94_init(state);
|
|
writeb(CMD_NOP, ®s->command);
|
|
|
|
spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
|
|
return SUCCESS;
|
|
}
|
|
|
|
static void mac53c94_init(struct fsc_state *state)
|
|
{
|
|
struct mac53c94_regs __iomem *regs = state->regs;
|
|
struct dbdma_regs __iomem *dma = state->dma;
|
|
int x;
|
|
|
|
writeb(state->host->this_id | CF1_PAR_ENABLE, ®s->config1);
|
|
writeb(TIMO_VAL(250), ®s->sel_timeout); /* 250ms */
|
|
writeb(CLKF_VAL(state->clk_freq), ®s->clk_factor);
|
|
writeb(CF2_FEATURE_EN, ®s->config2);
|
|
writeb(0, ®s->config3);
|
|
writeb(0, ®s->sync_period);
|
|
writeb(0, ®s->sync_offset);
|
|
x = readb(®s->interrupt);
|
|
writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
|
|
}
|
|
|
|
/*
|
|
* Start the next command for a 53C94.
|
|
* Should be called with interrupts disabled.
|
|
*/
|
|
static void mac53c94_start(struct fsc_state *state)
|
|
{
|
|
struct scsi_cmnd *cmd;
|
|
struct mac53c94_regs __iomem *regs = state->regs;
|
|
int i;
|
|
|
|
if (state->phase != idle || state->current_req != NULL)
|
|
panic("inappropriate mac53c94_start (state=%p)", state);
|
|
if (state->request_q == NULL)
|
|
return;
|
|
state->current_req = cmd = state->request_q;
|
|
state->request_q = (struct scsi_cmnd *) cmd->host_scribble;
|
|
|
|
/* Off we go */
|
|
writeb(0, ®s->count_lo);
|
|
writeb(0, ®s->count_mid);
|
|
writeb(0, ®s->count_hi);
|
|
writeb(CMD_NOP + CMD_DMA_MODE, ®s->command);
|
|
udelay(1);
|
|
writeb(CMD_FLUSH, ®s->command);
|
|
udelay(1);
|
|
writeb(cmd->device->id, ®s->dest_id);
|
|
writeb(0, ®s->sync_period);
|
|
writeb(0, ®s->sync_offset);
|
|
|
|
/* load the command into the FIFO */
|
|
for (i = 0; i < cmd->cmd_len; ++i)
|
|
writeb(cmd->cmnd[i], ®s->fifo);
|
|
|
|
/* do select without ATN XXX */
|
|
writeb(CMD_SELECT, ®s->command);
|
|
state->phase = selecting;
|
|
|
|
set_dma_cmds(state, cmd);
|
|
}
|
|
|
|
static irqreturn_t do_mac53c94_interrupt(int irq, void *dev_id)
|
|
{
|
|
unsigned long flags;
|
|
struct Scsi_Host *dev = ((struct fsc_state *) dev_id)->current_req->device->host;
|
|
|
|
spin_lock_irqsave(dev->host_lock, flags);
|
|
mac53c94_interrupt(irq, dev_id);
|
|
spin_unlock_irqrestore(dev->host_lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void mac53c94_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct fsc_state *state = (struct fsc_state *) dev_id;
|
|
struct mac53c94_regs __iomem *regs = state->regs;
|
|
struct dbdma_regs __iomem *dma = state->dma;
|
|
struct scsi_cmnd *cmd = state->current_req;
|
|
int nb, stat, seq, intr;
|
|
static int mac53c94_errors;
|
|
|
|
/*
|
|
* Apparently, reading the interrupt register unlatches
|
|
* the status and sequence step registers.
|
|
*/
|
|
seq = readb(®s->seqstep);
|
|
stat = readb(®s->status);
|
|
intr = readb(®s->interrupt);
|
|
|
|
#if 0
|
|
printk(KERN_DEBUG "mac53c94_intr, intr=%x stat=%x seq=%x phase=%d\n",
|
|
intr, stat, seq, state->phase);
|
|
#endif
|
|
|
|
if (intr & INTR_RESET) {
|
|
/* SCSI bus was reset */
|
|
printk(KERN_INFO "external SCSI bus reset detected\n");
|
|
writeb(CMD_NOP, ®s->command);
|
|
writel(RUN << 16, &dma->control); /* stop dma */
|
|
cmd_done(state, DID_RESET << 16);
|
|
return;
|
|
}
|
|
if (intr & INTR_ILL_CMD) {
|
|
printk(KERN_ERR "53c94: invalid cmd, intr=%x stat=%x seq=%x phase=%d\n",
|
|
intr, stat, seq, state->phase);
|
|
cmd_done(state, DID_ERROR << 16);
|
|
return;
|
|
}
|
|
if (stat & STAT_ERROR) {
|
|
#if 0
|
|
/* XXX these seem to be harmless? */
|
|
printk("53c94: bad error, intr=%x stat=%x seq=%x phase=%d\n",
|
|
intr, stat, seq, state->phase);
|
|
#endif
|
|
++mac53c94_errors;
|
|
writeb(CMD_NOP + CMD_DMA_MODE, ®s->command);
|
|
}
|
|
if (cmd == 0) {
|
|
printk(KERN_DEBUG "53c94: interrupt with no command active?\n");
|
|
return;
|
|
}
|
|
if (stat & STAT_PARITY) {
|
|
printk(KERN_ERR "mac53c94: parity error\n");
|
|
cmd_done(state, DID_PARITY << 16);
|
|
return;
|
|
}
|
|
switch (state->phase) {
|
|
case selecting:
|
|
if (intr & INTR_DISCONNECT) {
|
|
/* selection timed out */
|
|
cmd_done(state, DID_BAD_TARGET << 16);
|
|
return;
|
|
}
|
|
if (intr != INTR_BUS_SERV + INTR_DONE) {
|
|
printk(KERN_DEBUG "got intr %x during selection\n", intr);
|
|
cmd_done(state, DID_ERROR << 16);
|
|
return;
|
|
}
|
|
if ((seq & SS_MASK) != SS_DONE) {
|
|
printk(KERN_DEBUG "seq step %x after command\n", seq);
|
|
cmd_done(state, DID_ERROR << 16);
|
|
return;
|
|
}
|
|
writeb(CMD_NOP, ®s->command);
|
|
/* set DMA controller going if any data to transfer */
|
|
if ((stat & (STAT_MSG|STAT_CD)) == 0
|
|
&& (scsi_sg_count(cmd) > 0 || scsi_bufflen(cmd))) {
|
|
nb = cmd->SCp.this_residual;
|
|
if (nb > 0xfff0)
|
|
nb = 0xfff0;
|
|
cmd->SCp.this_residual -= nb;
|
|
writeb(nb, ®s->count_lo);
|
|
writeb(nb >> 8, ®s->count_mid);
|
|
writeb(CMD_DMA_MODE + CMD_NOP, ®s->command);
|
|
writel(virt_to_phys(state->dma_cmds), &dma->cmdptr);
|
|
writel((RUN << 16) | RUN, &dma->control);
|
|
writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command);
|
|
state->phase = dataing;
|
|
break;
|
|
} else if ((stat & STAT_PHASE) == STAT_CD + STAT_IO) {
|
|
/* up to status phase already */
|
|
writeb(CMD_I_COMPLETE, ®s->command);
|
|
state->phase = completing;
|
|
} else {
|
|
printk(KERN_DEBUG "in unexpected phase %x after cmd\n",
|
|
stat & STAT_PHASE);
|
|
cmd_done(state, DID_ERROR << 16);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case dataing:
|
|
if (intr != INTR_BUS_SERV) {
|
|
printk(KERN_DEBUG "got intr %x before status\n", intr);
|
|
cmd_done(state, DID_ERROR << 16);
|
|
return;
|
|
}
|
|
if (cmd->SCp.this_residual != 0
|
|
&& (stat & (STAT_MSG|STAT_CD)) == 0) {
|
|
/* Set up the count regs to transfer more */
|
|
nb = cmd->SCp.this_residual;
|
|
if (nb > 0xfff0)
|
|
nb = 0xfff0;
|
|
cmd->SCp.this_residual -= nb;
|
|
writeb(nb, ®s->count_lo);
|
|
writeb(nb >> 8, ®s->count_mid);
|
|
writeb(CMD_DMA_MODE + CMD_NOP, ®s->command);
|
|
writeb(CMD_DMA_MODE + CMD_XFER_DATA, ®s->command);
|
|
break;
|
|
}
|
|
if ((stat & STAT_PHASE) != STAT_CD + STAT_IO) {
|
|
printk(KERN_DEBUG "intr %x before data xfer complete\n", intr);
|
|
}
|
|
writel(RUN << 16, &dma->control); /* stop dma */
|
|
scsi_dma_unmap(cmd);
|
|
/* should check dma status */
|
|
writeb(CMD_I_COMPLETE, ®s->command);
|
|
state->phase = completing;
|
|
break;
|
|
case completing:
|
|
if (intr != INTR_DONE) {
|
|
printk(KERN_DEBUG "got intr %x on completion\n", intr);
|
|
cmd_done(state, DID_ERROR << 16);
|
|
return;
|
|
}
|
|
cmd->SCp.Status = readb(®s->fifo);
|
|
cmd->SCp.Message = readb(®s->fifo);
|
|
cmd->result = CMD_ACCEPT_MSG;
|
|
writeb(CMD_ACCEPT_MSG, ®s->command);
|
|
state->phase = busfreeing;
|
|
break;
|
|
case busfreeing:
|
|
if (intr != INTR_DISCONNECT) {
|
|
printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr);
|
|
}
|
|
cmd_done(state, (DID_OK << 16) + (cmd->SCp.Message << 8)
|
|
+ cmd->SCp.Status);
|
|
break;
|
|
default:
|
|
printk(KERN_DEBUG "don't know about phase %d\n", state->phase);
|
|
}
|
|
}
|
|
|
|
static void cmd_done(struct fsc_state *state, int result)
|
|
{
|
|
struct scsi_cmnd *cmd;
|
|
|
|
cmd = state->current_req;
|
|
if (cmd != 0) {
|
|
cmd->result = result;
|
|
(*cmd->scsi_done)(cmd);
|
|
state->current_req = NULL;
|
|
}
|
|
state->phase = idle;
|
|
mac53c94_start(state);
|
|
}
|
|
|
|
/*
|
|
* Set up DMA commands for transferring data.
|
|
*/
|
|
static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd)
|
|
{
|
|
int i, dma_cmd, total, nseg;
|
|
struct scatterlist *scl;
|
|
struct dbdma_cmd *dcmds;
|
|
dma_addr_t dma_addr;
|
|
u32 dma_len;
|
|
|
|
nseg = scsi_dma_map(cmd);
|
|
BUG_ON(nseg < 0);
|
|
if (!nseg)
|
|
return;
|
|
|
|
dma_cmd = cmd->sc_data_direction == DMA_TO_DEVICE ?
|
|
OUTPUT_MORE : INPUT_MORE;
|
|
dcmds = state->dma_cmds;
|
|
total = 0;
|
|
|
|
scsi_for_each_sg(cmd, scl, nseg, i) {
|
|
dma_addr = sg_dma_address(scl);
|
|
dma_len = sg_dma_len(scl);
|
|
if (dma_len > 0xffff)
|
|
panic("mac53c94: scatterlist element >= 64k");
|
|
total += dma_len;
|
|
dcmds->req_count = cpu_to_le16(dma_len);
|
|
dcmds->command = cpu_to_le16(dma_cmd);
|
|
dcmds->phy_addr = cpu_to_le32(dma_addr);
|
|
dcmds->xfer_status = 0;
|
|
++dcmds;
|
|
}
|
|
|
|
dma_cmd += OUTPUT_LAST - OUTPUT_MORE;
|
|
dcmds[-1].command = cpu_to_le16(dma_cmd);
|
|
dcmds->command = cpu_to_le16(DBDMA_STOP);
|
|
cmd->SCp.this_residual = total;
|
|
}
|
|
|
|
static struct scsi_host_template mac53c94_template = {
|
|
.proc_name = "53c94",
|
|
.name = "53C94",
|
|
.queuecommand = mac53c94_queue,
|
|
.eh_host_reset_handler = mac53c94_host_reset,
|
|
.can_queue = 1,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.max_segment_size = 65535,
|
|
};
|
|
|
|
static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *match)
|
|
{
|
|
struct device_node *node = macio_get_of_node(mdev);
|
|
struct pci_dev *pdev = macio_get_pci_dev(mdev);
|
|
struct fsc_state *state;
|
|
struct Scsi_Host *host;
|
|
void *dma_cmd_space;
|
|
const unsigned char *clkprop;
|
|
int proplen, rc = -ENODEV;
|
|
|
|
if (macio_resource_count(mdev) != 2 || macio_irq_count(mdev) != 2) {
|
|
printk(KERN_ERR "mac53c94: expected 2 addrs and intrs"
|
|
" (got %d/%d)\n",
|
|
macio_resource_count(mdev), macio_irq_count(mdev));
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (macio_request_resources(mdev, "mac53c94") != 0) {
|
|
printk(KERN_ERR "mac53c94: unable to request memory resources");
|
|
return -EBUSY;
|
|
}
|
|
|
|
host = scsi_host_alloc(&mac53c94_template, sizeof(struct fsc_state));
|
|
if (host == NULL) {
|
|
printk(KERN_ERR "mac53c94: couldn't register host");
|
|
rc = -ENOMEM;
|
|
goto out_release;
|
|
}
|
|
|
|
state = (struct fsc_state *) host->hostdata;
|
|
macio_set_drvdata(mdev, state);
|
|
state->host = host;
|
|
state->pdev = pdev;
|
|
state->mdev = mdev;
|
|
|
|
state->regs = (struct mac53c94_regs __iomem *)
|
|
ioremap(macio_resource_start(mdev, 0), 0x1000);
|
|
state->intr = macio_irq(mdev, 0);
|
|
state->dma = (struct dbdma_regs __iomem *)
|
|
ioremap(macio_resource_start(mdev, 1), 0x1000);
|
|
state->dmaintr = macio_irq(mdev, 1);
|
|
if (state->regs == NULL || state->dma == NULL) {
|
|
printk(KERN_ERR "mac53c94: ioremap failed for %pOF\n", node);
|
|
goto out_free;
|
|
}
|
|
|
|
clkprop = of_get_property(node, "clock-frequency", &proplen);
|
|
if (clkprop == NULL || proplen != sizeof(int)) {
|
|
printk(KERN_ERR "%pOF: can't get clock frequency, "
|
|
"assuming 25MHz\n", node);
|
|
state->clk_freq = 25000000;
|
|
} else
|
|
state->clk_freq = *(int *)clkprop;
|
|
|
|
/* Space for dma command list: +1 for stop command,
|
|
* +1 to allow for aligning.
|
|
* XXX FIXME: Use DMA consistent routines
|
|
*/
|
|
dma_cmd_space = kmalloc_array(host->sg_tablesize + 2,
|
|
sizeof(struct dbdma_cmd),
|
|
GFP_KERNEL);
|
|
if (dma_cmd_space == 0) {
|
|
printk(KERN_ERR "mac53c94: couldn't allocate dma "
|
|
"command space for %pOF\n", node);
|
|
rc = -ENOMEM;
|
|
goto out_free;
|
|
}
|
|
state->dma_cmds = (struct dbdma_cmd *)DBDMA_ALIGN(dma_cmd_space);
|
|
memset(state->dma_cmds, 0, (host->sg_tablesize + 1)
|
|
* sizeof(struct dbdma_cmd));
|
|
state->dma_cmd_space = dma_cmd_space;
|
|
|
|
mac53c94_init(state);
|
|
|
|
if (request_irq(state->intr, do_mac53c94_interrupt, 0, "53C94",state)) {
|
|
printk(KERN_ERR "mac53C94: can't get irq %d for %pOF\n",
|
|
state->intr, node);
|
|
goto out_free_dma;
|
|
}
|
|
|
|
rc = scsi_add_host(host, &mdev->ofdev.dev);
|
|
if (rc != 0)
|
|
goto out_release_irq;
|
|
|
|
scsi_scan_host(host);
|
|
return 0;
|
|
|
|
out_release_irq:
|
|
free_irq(state->intr, state);
|
|
out_free_dma:
|
|
kfree(state->dma_cmd_space);
|
|
out_free:
|
|
if (state->dma != NULL)
|
|
iounmap(state->dma);
|
|
if (state->regs != NULL)
|
|
iounmap(state->regs);
|
|
scsi_host_put(host);
|
|
out_release:
|
|
macio_release_resources(mdev);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int mac53c94_remove(struct macio_dev *mdev)
|
|
{
|
|
struct fsc_state *fp = (struct fsc_state *)macio_get_drvdata(mdev);
|
|
struct Scsi_Host *host = fp->host;
|
|
|
|
scsi_remove_host(host);
|
|
|
|
free_irq(fp->intr, fp);
|
|
|
|
if (fp->regs)
|
|
iounmap(fp->regs);
|
|
if (fp->dma)
|
|
iounmap(fp->dma);
|
|
kfree(fp->dma_cmd_space);
|
|
|
|
scsi_host_put(host);
|
|
|
|
macio_release_resources(mdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct of_device_id mac53c94_match[] =
|
|
{
|
|
{
|
|
.name = "53c94",
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE (of, mac53c94_match);
|
|
|
|
static struct macio_driver mac53c94_driver =
|
|
{
|
|
.driver = {
|
|
.name = "mac53c94",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = mac53c94_match,
|
|
},
|
|
.probe = mac53c94_probe,
|
|
.remove = mac53c94_remove,
|
|
};
|
|
|
|
|
|
static int __init init_mac53c94(void)
|
|
{
|
|
return macio_register_driver(&mac53c94_driver);
|
|
}
|
|
|
|
static void __exit exit_mac53c94(void)
|
|
{
|
|
return macio_unregister_driver(&mac53c94_driver);
|
|
}
|
|
|
|
module_init(init_mac53c94);
|
|
module_exit(exit_mac53c94);
|
|
|
|
MODULE_DESCRIPTION("PowerMac 53c94 SCSI driver");
|
|
MODULE_AUTHOR("Paul Mackerras <paulus@samba.org>");
|
|
MODULE_LICENSE("GPL");
|