linux/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
Sascha Hauer ee1ae4d7b1 ARM i.MX51: Full iomux support
This iomux file has been constructed from the Freescale pinmux tool.
It contains all pins from the tool, but the datasheet lists some
configurations not present in the tool, these are not yet added.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-15 14:42:23 +01:00

223 lines
5.1 KiB
C

/*
*
* Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/fsl_devices.h>
#include <linux/i2c/tsc2007.h>
#include <linux/leds.h>
#include <linux/input/matrix_keypad.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx51.h>
#include <asm/mach/arch.h>
#include "devices-imx51.h"
#include "devices.h"
#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30)
#define MBIMX51_TSC2007_IRQ (MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
#define MBIMX51_LED0 IMX_GPIO_NR(3, 5)
#define MBIMX51_LED1 IMX_GPIO_NR(3, 6)
#define MBIMX51_LED2 IMX_GPIO_NR(3, 7)
#define MBIMX51_LED3 IMX_GPIO_NR(3, 8)
static struct gpio_led mbimx51_leds[] = {
{
.name = "led0",
.default_trigger = "heartbeat",
.active_low = 1,
.gpio = MBIMX51_LED0,
},
{
.name = "led1",
.default_trigger = "nand-disk",
.active_low = 1,
.gpio = MBIMX51_LED1,
},
{
.name = "led2",
.default_trigger = "mmc0",
.active_low = 1,
.gpio = MBIMX51_LED2,
},
{
.name = "led3",
.default_trigger = "default-on",
.active_low = 1,
.gpio = MBIMX51_LED3,
},
};
static struct gpio_led_platform_data mbimx51_leds_info = {
.leds = mbimx51_leds,
.num_leds = ARRAY_SIZE(mbimx51_leds),
};
static struct platform_device mbimx51_leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mbimx51_leds_info,
},
};
static struct platform_device *devices[] __initdata = {
&mbimx51_leds_gpio,
};
static iomux_v3_cfg_t mbimx51_pads[] = {
/* UART2 */
MX51_PAD_UART2_RXD__UART2_RXD,
MX51_PAD_UART2_TXD__UART2_TXD,
/* UART3 */
MX51_PAD_UART3_RXD__UART3_RXD,
MX51_PAD_UART3_TXD__UART3_TXD,
MX51_PAD_KEY_COL4__UART3_RTS,
MX51_PAD_KEY_COL5__UART3_CTS,
/* TSC2007 IRQ */
MX51_PAD_NANDF_D10__GPIO3_30,
/* LEDS */
MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
MX51_PAD_DISPB2_SER_RS__GPIO3_8,
/* KPP */
MX51_PAD_KEY_ROW0__KEY_ROW0,
MX51_PAD_KEY_ROW1__KEY_ROW1,
MX51_PAD_KEY_ROW2__KEY_ROW2,
MX51_PAD_KEY_ROW3__KEY_ROW3,
MX51_PAD_KEY_COL0__KEY_COL0,
MX51_PAD_KEY_COL1__KEY_COL1,
MX51_PAD_KEY_COL2__KEY_COL2,
MX51_PAD_KEY_COL3__KEY_COL3,
/* SD 1 */
MX51_PAD_SD1_CMD__SD1_CMD,
MX51_PAD_SD1_CLK__SD1_CLK,
MX51_PAD_SD1_DATA0__SD1_DATA0,
MX51_PAD_SD1_DATA1__SD1_DATA1,
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
/* SD 2 */
MX51_PAD_SD2_CMD__SD2_CMD,
MX51_PAD_SD2_CLK__SD2_CLK,
MX51_PAD_SD2_DATA0__SD2_DATA0,
MX51_PAD_SD2_DATA1__SD2_DATA1,
MX51_PAD_SD2_DATA2__SD2_DATA2,
MX51_PAD_SD2_DATA3__SD2_DATA3,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static int mbimx51_keymap[] = {
KEY(0, 0, KEY_1),
KEY(0, 1, KEY_2),
KEY(0, 2, KEY_3),
KEY(0, 3, KEY_UP),
KEY(1, 0, KEY_4),
KEY(1, 1, KEY_5),
KEY(1, 2, KEY_6),
KEY(1, 3, KEY_LEFT),
KEY(2, 0, KEY_7),
KEY(2, 1, KEY_8),
KEY(2, 2, KEY_9),
KEY(2, 3, KEY_RIGHT),
KEY(3, 0, KEY_0),
KEY(3, 1, KEY_DOWN),
KEY(3, 2, KEY_ESC),
KEY(3, 3, KEY_ENTER),
};
static struct matrix_keymap_data mbimx51_map_data = {
.keymap = mbimx51_keymap,
.keymap_size = ARRAY_SIZE(mbimx51_keymap),
};
static int tsc2007_get_pendown_state(void)
{
return !gpio_get_value(MBIMX51_TSC2007_GPIO);
}
struct tsc2007_platform_data tsc2007_data = {
.model = 2007,
.x_plate_ohms = 180,
.get_pendown_state = tsc2007_get_pendown_state,
};
static struct i2c_board_info mbimx51_i2c_devices[] = {
{
I2C_BOARD_INFO("tsc2007", 0x49),
.irq = MBIMX51_TSC2007_IRQ,
.platform_data = &tsc2007_data,
}, {
I2C_BOARD_INFO("tlv320aic23", 0x1a),
},
};
/*
* baseboard initialization.
*/
void __init eukrea_mbimx51_baseboard_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
ARRAY_SIZE(mbimx51_pads));
imx51_add_imx_uart(1, NULL);
imx51_add_imx_uart(2, &uart_pdata);
gpio_request(MBIMX51_LED0, "LED0");
gpio_direction_output(MBIMX51_LED0, 1);
gpio_free(MBIMX51_LED0);
gpio_request(MBIMX51_LED1, "LED1");
gpio_direction_output(MBIMX51_LED1, 1);
gpio_free(MBIMX51_LED1);
gpio_request(MBIMX51_LED2, "LED2");
gpio_direction_output(MBIMX51_LED2, 1);
gpio_free(MBIMX51_LED2);
gpio_request(MBIMX51_LED3, "LED3");
gpio_direction_output(MBIMX51_LED3, 1);
gpio_free(MBIMX51_LED3);
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_keypad_device, &mbimx51_map_data);
gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
gpio_direction_input(MBIMX51_TSC2007_GPIO);
set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
i2c_register_board_info(1, mbimx51_i2c_devices,
ARRAY_SIZE(mbimx51_i2c_devices));
imx51_add_sdhci_esdhc_imx(0, NULL);
imx51_add_sdhci_esdhc_imx(1, NULL);
}