mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 12:52:30 +00:00
0d279d4761
This patch contains a handful of small fixes to allow the Ebony's flash to be exposed as MTD devices via the physmap_of driver. Specifically it: - Makes a small addition to the device tree and zImage wrapper to record the correct address for the flash in the device tree based on the board switches as reported via an FPGA register. - Prohibits building the old hard-coded "Ebony" flash map on arch/powerpc kernels, in favour of using physmap_of's device tree based approach. - Enables MTD and physmap_of in the Ebony defconfig. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
296 lines
6.6 KiB
Plaintext
296 lines
6.6 KiB
Plaintext
/*
|
|
* Device Tree Source for IBM Ebony
|
|
*
|
|
* Copyright (c) 2006, 2007 IBM Corp.
|
|
* Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
|
|
*
|
|
* FIXME: Draft only!
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*
|
|
* To build:
|
|
* dtc -I dts -O asm -o ebony.S -b 0 ebony.dts
|
|
* dtc -I dts -O dtb -o ebony.dtb -b 0 ebony.dts
|
|
*/
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
model = "ibm,ebony";
|
|
compatible = "ibm,ebony";
|
|
dcr-parent = <&/cpus/PowerPC,440GP@0>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,440GP@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
clock-frequency = <0>; // Filled in by zImage
|
|
timebase-frequency = <0>; // Filled in by zImage
|
|
i-cache-line-size = <20>;
|
|
d-cache-line-size = <20>;
|
|
i-cache-size = <8000>; /* 32 kB */
|
|
d-cache-size = <8000>; /* 32 kB */
|
|
dcr-controller;
|
|
dcr-access-method = "native";
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0 0 0>; // Filled in by zImage
|
|
};
|
|
|
|
UIC0: interrupt-controller0 {
|
|
compatible = "ibm,uic-440gp", "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <0>;
|
|
dcr-reg = <0c0 009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
|
|
};
|
|
|
|
UIC1: interrupt-controller1 {
|
|
compatible = "ibm,uic-440gp", "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <1>;
|
|
dcr-reg = <0d0 009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <1e 4 1f 4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
CPC0: cpc {
|
|
compatible = "ibm,cpc-440gp";
|
|
dcr-reg = <0b0 003 0e0 010>;
|
|
// FIXME: anything else?
|
|
};
|
|
|
|
plb {
|
|
compatible = "ibm,plb-440gp", "ibm,plb4";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clock-frequency = <0>; // Filled in by zImage
|
|
|
|
SDRAM0: memory-controller {
|
|
compatible = "ibm,sdram-440gp";
|
|
dcr-reg = <010 2>;
|
|
// FIXME: anything else?
|
|
};
|
|
|
|
SRAM0: sram {
|
|
compatible = "ibm,sram-440gp";
|
|
dcr-reg = <020 8 00a 1>;
|
|
};
|
|
|
|
DMA0: dma {
|
|
// FIXME: ???
|
|
compatible = "ibm,dma-440gp";
|
|
dcr-reg = <100 027>;
|
|
};
|
|
|
|
MAL0: mcmal {
|
|
compatible = "ibm,mcmal-440gp", "ibm,mcmal";
|
|
dcr-reg = <180 62>;
|
|
num-tx-chans = <4>;
|
|
num-rx-chans = <4>;
|
|
interrupt-parent = <&MAL0>;
|
|
interrupts = <0 1 2 3 4>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
|
|
/*RXEOB*/ 1 &UIC0 b 4
|
|
/*SERR*/ 2 &UIC1 0 4
|
|
/*TXDE*/ 3 &UIC1 1 4
|
|
/*RXDE*/ 4 &UIC1 2 4>;
|
|
interrupt-map-mask = <ffffffff>;
|
|
};
|
|
|
|
POB0: opb {
|
|
compatible = "ibm,opb-440gp", "ibm,opb";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/* Wish there was a nicer way of specifying a full 32-bit
|
|
range */
|
|
ranges = <00000000 1 00000000 80000000
|
|
80000000 1 80000000 80000000>;
|
|
dcr-reg = <090 00b>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <7 4>;
|
|
clock-frequency = <0>; // Filled in by zImage
|
|
|
|
EBC0: ebc {
|
|
compatible = "ibm,ebc-440gp", "ibm,ebc";
|
|
dcr-reg = <012 2>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
clock-frequency = <0>; // Filled in by zImage
|
|
// ranges property is supplied by zImage
|
|
// based on firmware's configuration of the
|
|
// EBC bridge
|
|
interrupts = <5 4>;
|
|
interrupt-parent = <&UIC1>;
|
|
|
|
small-flash@0,80000 {
|
|
device_type = "rom";
|
|
compatible = "direct-mapped";
|
|
probe-type = "JEDEC";
|
|
bank-width = <1>;
|
|
partitions = <0 80000>;
|
|
partition-names = "OpenBIOS";
|
|
reg = <0 80000 80000>;
|
|
};
|
|
|
|
ds1743@1,0 {
|
|
/* NVRAM & RTC */
|
|
compatible = "ds1743";
|
|
reg = <1 0 2000>;
|
|
};
|
|
|
|
large-flash@2,0 {
|
|
device_type = "rom";
|
|
compatible = "direct-mapped";
|
|
probe-type = "JEDEC";
|
|
bank-width = <1>;
|
|
partitions = <0 380000
|
|
380000 80000>;
|
|
partition-names = "fs", "firmware";
|
|
reg = <2 0 400000>;
|
|
};
|
|
|
|
ir@3,0 {
|
|
reg = <3 0 10>;
|
|
};
|
|
|
|
fpga@7,0 {
|
|
compatible = "Ebony-FPGA";
|
|
reg = <7 0 10>;
|
|
virtual-reg = <e8300000>;
|
|
};
|
|
};
|
|
|
|
UART0: serial@40000200 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <40000200 8>;
|
|
virtual-reg = <e0000200>;
|
|
clock-frequency = <A8C000>;
|
|
current-speed = <2580>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0 4>;
|
|
};
|
|
|
|
UART1: serial@40000300 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <40000300 8>;
|
|
virtual-reg = <e0000300>;
|
|
clock-frequency = <A8C000>;
|
|
current-speed = <2580>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <1 4>;
|
|
};
|
|
|
|
IIC0: i2c@40000400 {
|
|
/* FIXME */
|
|
device_type = "i2c";
|
|
compatible = "ibm,iic-440gp", "ibm,iic";
|
|
reg = <40000400 14>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <2 4>;
|
|
};
|
|
IIC1: i2c@40000500 {
|
|
/* FIXME */
|
|
device_type = "i2c";
|
|
compatible = "ibm,iic-440gp", "ibm,iic";
|
|
reg = <40000500 14>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <3 4>;
|
|
};
|
|
|
|
GPIO0: gpio@40000700 {
|
|
/* FIXME */
|
|
compatible = "ibm,gpio-440gp";
|
|
reg = <40000700 20>;
|
|
};
|
|
|
|
ZMII0: emac-zmii@40000780 {
|
|
compatible = "ibm,zmii-440gp", "ibm,zmii";
|
|
reg = <40000780 c>;
|
|
};
|
|
|
|
EMAC0: ethernet@40000800 {
|
|
linux,network-index = <0>;
|
|
device_type = "network";
|
|
compatible = "ibm,emac-440gp", "ibm,emac";
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <1c 4 1d 4>;
|
|
reg = <40000800 70>;
|
|
local-mac-address = [000000000000]; // Filled in by zImage
|
|
mal-device = <&MAL0>;
|
|
mal-tx-channel = <0 1>;
|
|
mal-rx-channel = <0>;
|
|
cell-index = <0>;
|
|
max-frame-size = <5dc>;
|
|
rx-fifo-size = <1000>;
|
|
tx-fifo-size = <800>;
|
|
phy-mode = "rmii";
|
|
phy-map = <00000001>;
|
|
zmii-device = <&ZMII0>;
|
|
zmii-channel = <0>;
|
|
};
|
|
EMAC1: ethernet@40000900 {
|
|
linux,network-index = <1>;
|
|
device_type = "network";
|
|
compatible = "ibm,emac-440gp", "ibm,emac";
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <1e 4 1f 4>;
|
|
reg = <40000900 70>;
|
|
local-mac-address = [000000000000]; // Filled in by zImage
|
|
mal-device = <&MAL0>;
|
|
mal-tx-channel = <2 3>;
|
|
mal-rx-channel = <1>;
|
|
cell-index = <1>;
|
|
max-frame-size = <5dc>;
|
|
rx-fifo-size = <1000>;
|
|
tx-fifo-size = <800>;
|
|
phy-mode = "rmii";
|
|
phy-map = <00000001>;
|
|
zmii-device = <&ZMII0>;
|
|
zmii-channel = <1>;
|
|
};
|
|
|
|
|
|
GPT0: gpt@40000a00 {
|
|
/* FIXME */
|
|
reg = <40000a00 d4>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <12 4 13 4 14 4 15 4 16 4>;
|
|
};
|
|
|
|
};
|
|
|
|
PCIX0: pci@1234 {
|
|
device_type = "pci";
|
|
/* FIXME */
|
|
reg = <2 0ec00000 8
|
|
2 0ec80000 f0
|
|
2 0ec80100 fc>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = "/plb/opb/serial@40000200";
|
|
};
|
|
};
|