linux/arch/arm/boot/dts/omap4-sdp.dts
Rajendra Nayak 624411ceba arm/dts: Cleanup regulator naming and remove @0,1
regulators do not have a 'reg' property, hence the regulator@0,
regulator@1 do not make sense. get rid of it.

Reported-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-30 13:47:04 -07:00

229 lines
4.3 KiB
Plaintext

/*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "omap4.dtsi"
/ {
model = "TI OMAP4 SDP board";
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
vdd_eth: fixedregulator-vdd-eth {
compatible = "regulator-fixed";
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 16 0>; /* gpio line 48 */
enable-active-high;
regulator-boot-on;
};
vbat: fixedregulator-vbat {
compatible = "regulator-fixed";
regulator-name = "VBAT";
regulator-min-microvolt = <3750000>;
regulator-max-microvolt = <3750000>;
regulator-boot-on;
};
leds {
compatible = "gpio-leds";
debug0 {
label = "omap4:green:debug0";
gpios = <&gpio2 29 0>; /* 61 */
};
debug1 {
label = "omap4:green:debug1";
gpios = <&gpio1 30 0>; /* 30 */
};
debug2 {
label = "omap4:green:debug2";
gpios = <&gpio1 7 0>; /* 7 */
};
debug3 {
label = "omap4:green:debug3";
gpios = <&gpio1 8 0>; /* 8 */
};
debug4 {
label = "omap4:green:debug4";
gpios = <&gpio2 18 0>; /* 50 */
};
user1 {
label = "omap4:blue:user";
gpios = <&gpio6 9 0>; /* 169 */
};
user2 {
label = "omap4:red:user";
gpios = <&gpio6 10 0>; /* 170 */
};
user3 {
label = "omap4:green:user";
gpios = <&gpio5 11 0>; /* 139 */
};
};
sound {
compatible = "ti,abe-twl6040";
ti,model = "SDP4430";
ti,jack-detection = <1>;
ti,mclk-freq = <38400000>;
ti,mcpdm = <&mcpdm>;
ti,dmic = <&dmic>;
ti,twl6040 = <&twl6040>;
/* Audio routing */
ti,audio-routing =
"Headset Stereophone", "HSOL",
"Headset Stereophone", "HSOR",
"Earphone Spk", "EP",
"Ext Spk", "HFL",
"Ext Spk", "HFR",
"Line Out", "AUXL",
"Line Out", "AUXR",
"Vibrator", "VIBRAL",
"Vibrator", "VIBRAR",
"HSMIC", "Headset Mic",
"Headset Mic", "Headset Mic Bias",
"MAINMIC", "Main Handset Mic",
"Main Handset Mic", "Main Mic Bias",
"SUBMIC", "Sub Handset Mic",
"Sub Handset Mic", "Main Mic Bias",
"AFML", "Line In",
"AFMR", "Line In",
"DMic", "Digital Mic",
"Digital Mic", "Digital Mic1 Bias";
};
};
&i2c1 {
clock-frequency = <400000>;
twl: twl@48 {
reg = <0x48>;
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
interrupt-parent = <&gic>;
};
twl6040: twl@4b {
compatible = "ti,twl6040";
reg = <0x4b>;
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
enable-active-high;
/* regulators for vibra motor */
vddvibl-supply = <&vbat>;
vddvibr-supply = <&vbat>;
vibra {
/* Vibra driver, motor resistance parameters */
ti,vibldrv-res = <8>;
ti,vibrdrv-res = <3>;
ti,viblmotor-res = <10>;
ti,vibrmotor-res = <10>;
};
};
};
/include/ "twl6030.dtsi"
&i2c2 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <400000>;
/*
* Temperature Sensor
* http://www.ti.com/lit/ds/symlink/tmp105.pdf
*/
tmp105@48 {
compatible = "ti,tmp105";
reg = <0x48>;
};
/*
* Ambient Light Sensor
* http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
*/
bh1780@29 {
compatible = "rohm,bh1780";
reg = <0x29>;
};
};
&i2c4 {
clock-frequency = <400000>;
/*
* 3-Axis Digital Compass
* http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
*/
hmc5843@1e {
compatible = "honeywell,hmc5843";
reg = <0x1e>;
};
};
&mcspi1 {
eth@0 {
compatible = "ks8851";
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <2>; /* gpio line 34 */
vdd-supply = <&vdd_eth>;
};
};
&mmc1 {
vmmc-supply = <&vmmc>;
bus-width = <8>;
};
&mmc2 {
vmmc-supply = <&vaux1>;
bus-width = <8>;
ti,non-removable;
};
&mmc3 {
status = "disabled";
};
&mmc4 {
status = "disabled";
};
&mmc5 {
bus-width = <4>;
ti,non-removable;
};