mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 10:32:35 +00:00
d5b2b22558
Setting a CAN bitrate of 800kbit/s fails with a bitrate error of 1.3% if the flexcan module is clocked at 30MHz (CAN_CLK_ROOT). This patch changes the clock frequency from 30MHz to 40MHz which allows to support all bitrates recommended by CiA. The patch sets CAN_CLK_SEL to 80MHz by changing its clock parent from CLK_PLL3_60M to CLK_PLL3_80M. The post-divider CAN_CLK_PODF is set to /2 by default which makes 40MHz CAN_CLK_ROOT from its parent CAN_CLK_SEL. Background: CAN in Automation document 102 (CiA102) recommends the CAN bitrates 10, 20, 50, 125, 250, 500, 800 and 1000kbit/s. With the flexcan serial clock at 30MHz (original value) setting some common bitrates ("ip link set canX type can bitrate <bitrate>") gives the following results: requested value / actually set value 5000: bitrate 5000 sample-point 0.708 10000: bitrate 10000 sample-point 0.866 20000: bitrate 20000 sample-point 0.866 40000: bitrate 40000 sample-point 0.866 50000: bitrate 50000 sample-point 0.866 80000: bitrate 80000 sample-point 0.866 100000: bitrate 100000 sample-point 0.866 125000: bitrate 125000 sample-point 0.875 250000: bitrate 250000 sample-point 0.866 400000: bitrate 400000 sample-point 0.866 500000: bitrate 500000 sample-point 0.866 666666: bitrate 666666 sample-point 0.800 800000: bitrate 789473 sample-point 0.789 !!!bitrate error 1.3% 1000000: bitrate 1000000 sample-point 0.733 With the flexcan serial clock at 40MHz (new value) we get this: 5000: no more possible 10000: bitrate 10000 sample-point 0.875 20000: bitrate 20000 sample-point 0.875 40000: bitrate 40000 sample-point 0.850 50000: bitrate 50000 sample-point 0.875 80000: bitrate 80000 sample-point 0.850 100000: bitrate 100000 sample-point 0.875 125000: bitrate 125000 sample-point 0.875 250000: bitrate 250000 sample-point 0.875 400000: bitrate 400000 sample-point 0.850 500000: bitrate 500000 sample-point 0.875 666666: bitrate 666666 sample-point 0.800 800000: bitrate 800000 sample-point 0.800 1000000: bitrate 1000000 sample-point 0.750 A drawback of the modification is that 5kbit/s is no more supported. Setting the flexcan serial clock to 60MHz or 80MHz would produce similar results but with losing even more bitrates at the lower end. Changing the flexcan serial clock to 40MHz might apply for other SoCs using the flaxcan module as well (e.g. imx6q/d/s..). But since I don't have such hardware to test I did not add this to the patch. Signed-off-by: Georg Waibel <georg.waibel@wiedemann-group.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
516 lines
34 KiB
C
516 lines
34 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (C) 2015 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/imx6ul-clock.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "clk.h"
|
|
|
|
static const char *pll_bypass_src_sels[] = { "osc", "dummy", };
|
|
static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
|
|
static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
|
|
static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
|
|
static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
|
|
static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
|
|
static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
|
|
static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
|
|
static const char *ca7_secondary_sels[] = { "pll2_pfd2_396m", "pll2_bus", };
|
|
static const char *step_sels[] = { "osc", "ca7_secondary_sel", };
|
|
static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
|
|
static const char *axi_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_540m", };
|
|
static const char *axi_sels[] = {"periph", "axi_alt_sel", };
|
|
static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
|
|
static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", };
|
|
static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "pll2_bypass_src", };
|
|
static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", };
|
|
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
|
|
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
|
|
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
|
|
static const char *bch_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
|
|
static const char *gpmi_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
|
|
static const char *eim_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd0_720m", };
|
|
static const char *spdif_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
|
|
static const char *sai_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", };
|
|
static const char *lcdif_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", };
|
|
static const char *sim_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
|
|
static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", };
|
|
static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", };
|
|
static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", };
|
|
static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", };
|
|
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", };
|
|
static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", };
|
|
static const char *ecspi_sels[] = { "pll3_60m", "osc", };
|
|
static const char *uart_sels[] = { "pll3_80m", "osc", };
|
|
static const char *perclk_sels[] = { "ipg", "osc", };
|
|
static const char *lcdif_sels[] = { "lcdif_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
|
|
static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
|
|
static const char *sim_sels[] = { "sim_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
|
|
/* epdc_pre_sels, epdc_sels, esai_sels only exists on i.MX6ULL */
|
|
static const char *epdc_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", };
|
|
static const char *esai_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", };
|
|
static const char *epdc_sels[] = { "epdc_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", };
|
|
static const char *cko1_sels[] = { "dummy", "dummy", "dummy", "dummy", "dummy", "axi", "enfc", "dummy", "dummy",
|
|
"dummy", "lcdif_pix", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
|
|
static const char *cko2_sels[] = { "dummy", "dummy", "dummy", "usdhc1", "dummy", "dummy", "ecspi_root", "dummy",
|
|
"dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "osc", "dummy",
|
|
"dummy", "usdhc2", "sai1", "sai2", "sai3", "dummy", "dummy", "can_root",
|
|
"dummy", "dummy", "dummy", "dummy", "uart_serial", "spdif", "dummy", "dummy", };
|
|
static const char *cko_sels[] = { "cko1", "cko2", };
|
|
|
|
static struct clk_hw **hws;
|
|
static struct clk_hw_onecell_data *clk_hw_data;
|
|
|
|
static const struct clk_div_table clk_enet_ref_table[] = {
|
|
{ .val = 0, .div = 20, },
|
|
{ .val = 1, .div = 10, },
|
|
{ .val = 2, .div = 5, },
|
|
{ .val = 3, .div = 4, },
|
|
{ }
|
|
};
|
|
|
|
static const struct clk_div_table post_div_table[] = {
|
|
{ .val = 2, .div = 1, },
|
|
{ .val = 1, .div = 2, },
|
|
{ .val = 0, .div = 4, },
|
|
{ }
|
|
};
|
|
|
|
static const struct clk_div_table video_div_table[] = {
|
|
{ .val = 0, .div = 1, },
|
|
{ .val = 1, .div = 2, },
|
|
{ .val = 2, .div = 1, },
|
|
{ .val = 3, .div = 4, },
|
|
{ }
|
|
};
|
|
|
|
static u32 share_count_asrc;
|
|
static u32 share_count_audio;
|
|
static u32 share_count_sai1;
|
|
static u32 share_count_sai2;
|
|
static u32 share_count_sai3;
|
|
static u32 share_count_esai;
|
|
|
|
static inline int clk_on_imx6ul(void)
|
|
{
|
|
return of_machine_is_compatible("fsl,imx6ul");
|
|
}
|
|
|
|
static inline int clk_on_imx6ull(void)
|
|
{
|
|
return of_machine_is_compatible("fsl,imx6ull");
|
|
}
|
|
|
|
static void __init imx6ul_clocks_init(struct device_node *ccm_node)
|
|
{
|
|
struct device_node *np;
|
|
void __iomem *base;
|
|
|
|
clk_hw_data = kzalloc(struct_size(clk_hw_data, hws,
|
|
IMX6UL_CLK_END), GFP_KERNEL);
|
|
if (WARN_ON(!clk_hw_data))
|
|
return;
|
|
|
|
clk_hw_data->num = IMX6UL_CLK_END;
|
|
hws = clk_hw_data->hws;
|
|
|
|
hws[IMX6UL_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0);
|
|
|
|
hws[IMX6UL_CLK_CKIL] = imx_obtain_fixed_clk_hw(ccm_node, "ckil");
|
|
hws[IMX6UL_CLK_OSC] = imx_obtain_fixed_clk_hw(ccm_node, "osc");
|
|
|
|
/* ipp_di clock is external input */
|
|
hws[IMX6UL_CLK_IPP_DI0] = imx_obtain_fixed_clk_hw(ccm_node, "ipp_di0");
|
|
hws[IMX6UL_CLK_IPP_DI1] = imx_obtain_fixed_clk_hw(ccm_node, "ipp_di1");
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-anatop");
|
|
base = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
WARN_ON(!base);
|
|
|
|
hws[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_hw_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6UL_PLL2_BYPASS_SRC] = imx_clk_hw_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6UL_PLL3_BYPASS_SRC] = imx_clk_hw_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6UL_PLL4_BYPASS_SRC] = imx_clk_hw_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6UL_PLL5_BYPASS_SRC] = imx_clk_hw_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6UL_PLL6_BYPASS_SRC] = imx_clk_hw_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
hws[IMX6UL_PLL7_BYPASS_SRC] = imx_clk_hw_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
|
|
|
|
hws[IMX6UL_CLK_PLL1] = imx_clk_hw_pllv3(IMX_PLLV3_SYS, "pll1", "osc", base + 0x00, 0x7f);
|
|
hws[IMX6UL_CLK_PLL2] = imx_clk_hw_pllv3(IMX_PLLV3_GENERIC, "pll2", "osc", base + 0x30, 0x1);
|
|
hws[IMX6UL_CLK_PLL3] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll3", "osc", base + 0x10, 0x3);
|
|
hws[IMX6UL_CLK_PLL4] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll4", "osc", base + 0x70, 0x7f);
|
|
hws[IMX6UL_CLK_PLL5] = imx_clk_hw_pllv3(IMX_PLLV3_AV, "pll5", "osc", base + 0xa0, 0x7f);
|
|
hws[IMX6UL_CLK_PLL6] = imx_clk_hw_pllv3(IMX_PLLV3_ENET, "pll6", "osc", base + 0xe0, 0x3);
|
|
hws[IMX6UL_CLK_PLL7] = imx_clk_hw_pllv3(IMX_PLLV3_USB, "pll7", "osc", base + 0x20, 0x3);
|
|
|
|
hws[IMX6UL_PLL1_BYPASS] = imx_clk_hw_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6UL_PLL2_BYPASS] = imx_clk_hw_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6UL_PLL3_BYPASS] = imx_clk_hw_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6UL_PLL4_BYPASS] = imx_clk_hw_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6UL_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6UL_PLL6_BYPASS] = imx_clk_hw_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6UL_PLL7_BYPASS] = imx_clk_hw_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6UL_CLK_CSI_SEL] = imx_clk_hw_mux_flags("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels), CLK_SET_RATE_PARENT);
|
|
|
|
/* Do not bypass PLLs initially */
|
|
clk_set_parent(hws[IMX6UL_PLL1_BYPASS]->clk, hws[IMX6UL_CLK_PLL1]->clk);
|
|
clk_set_parent(hws[IMX6UL_PLL2_BYPASS]->clk, hws[IMX6UL_CLK_PLL2]->clk);
|
|
clk_set_parent(hws[IMX6UL_PLL3_BYPASS]->clk, hws[IMX6UL_CLK_PLL3]->clk);
|
|
clk_set_parent(hws[IMX6UL_PLL4_BYPASS]->clk, hws[IMX6UL_CLK_PLL4]->clk);
|
|
clk_set_parent(hws[IMX6UL_PLL5_BYPASS]->clk, hws[IMX6UL_CLK_PLL5]->clk);
|
|
clk_set_parent(hws[IMX6UL_PLL6_BYPASS]->clk, hws[IMX6UL_CLK_PLL6]->clk);
|
|
clk_set_parent(hws[IMX6UL_PLL7_BYPASS]->clk, hws[IMX6UL_CLK_PLL7]->clk);
|
|
|
|
hws[IMX6UL_CLK_PLL1_SYS] = imx_clk_hw_fixed_factor("pll1_sys", "pll1_bypass", 1, 1);
|
|
hws[IMX6UL_CLK_PLL2_BUS] = imx_clk_hw_gate("pll2_bus", "pll2_bypass", base + 0x30, 13);
|
|
hws[IMX6UL_CLK_PLL3_USB_OTG] = imx_clk_hw_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
|
|
hws[IMX6UL_CLK_PLL4_AUDIO] = imx_clk_hw_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
|
|
hws[IMX6UL_CLK_PLL5_VIDEO] = imx_clk_hw_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
|
|
hws[IMX6UL_CLK_PLL6_ENET] = imx_clk_hw_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
|
|
hws[IMX6UL_CLK_PLL7_USB_HOST] = imx_clk_hw_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);
|
|
|
|
/*
|
|
* Bit 20 is the reserved and read-only bit, we do this only for:
|
|
* - Do nothing for usbphy clk_enable/disable
|
|
* - Keep refcount when do usbphy clk_enable/disable, in that case,
|
|
* the clk framework many need to enable/disable usbphy's parent
|
|
*/
|
|
hws[IMX6UL_CLK_USBPHY1] = imx_clk_hw_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
|
|
hws[IMX6UL_CLK_USBPHY2] = imx_clk_hw_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
|
|
|
|
/*
|
|
* usbphy*_gate needs to be on after system boots up, and software
|
|
* never needs to control it anymore.
|
|
*/
|
|
hws[IMX6UL_CLK_USBPHY1_GATE] = imx_clk_hw_gate("usbphy1_gate", "dummy", base + 0x10, 6);
|
|
hws[IMX6UL_CLK_USBPHY2_GATE] = imx_clk_hw_gate("usbphy2_gate", "dummy", base + 0x20, 6);
|
|
|
|
/* name parent_name reg idx */
|
|
hws[IMX6UL_CLK_PLL2_PFD0] = imx_clk_hw_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
|
|
hws[IMX6UL_CLK_PLL2_PFD1] = imx_clk_hw_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
|
|
hws[IMX6UL_CLK_PLL2_PFD2] = imx_clk_hw_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
|
|
hws[IMX6UL_CLK_PLL2_PFD3] = imx_clk_hw_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3);
|
|
hws[IMX6UL_CLK_PLL3_PFD0] = imx_clk_hw_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
|
|
hws[IMX6UL_CLK_PLL3_PFD1] = imx_clk_hw_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
|
|
hws[IMX6UL_CLK_PLL3_PFD2] = imx_clk_hw_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
|
|
hws[IMX6UL_CLK_PLL3_PFD3] = imx_clk_hw_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
|
|
|
|
hws[IMX6UL_CLK_ENET_REF] = clk_hw_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
|
|
base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
|
|
hws[IMX6UL_CLK_ENET2_REF] = clk_hw_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
|
|
base + 0xe0, 2, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
|
|
|
|
hws[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_hw_gate("enet_ref_125m", "enet2_ref", base + 0xe0, 20);
|
|
hws[IMX6UL_CLK_ENET_PTP_REF] = imx_clk_hw_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
|
|
hws[IMX6UL_CLK_ENET_PTP] = imx_clk_hw_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);
|
|
|
|
hws[IMX6UL_CLK_PLL4_POST_DIV] = clk_hw_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
|
|
CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
|
|
hws[IMX6UL_CLK_PLL4_AUDIO_DIV] = clk_hw_register_divider(NULL, "pll4_audio_div", "pll4_post_div",
|
|
CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 15, 1, 0, &imx_ccm_lock);
|
|
hws[IMX6UL_CLK_PLL5_POST_DIV] = clk_hw_register_divider_table(NULL, "pll5_post_div", "pll5_video",
|
|
CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
|
|
hws[IMX6UL_CLK_PLL5_VIDEO_DIV] = clk_hw_register_divider_table(NULL, "pll5_video_div", "pll5_post_div",
|
|
CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
|
|
|
|
/* name parent_name mult div */
|
|
hws[IMX6UL_CLK_PLL2_198M] = imx_clk_hw_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
|
|
hws[IMX6UL_CLK_PLL3_80M] = imx_clk_hw_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
|
|
hws[IMX6UL_CLK_PLL3_60M] = imx_clk_hw_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
|
|
hws[IMX6UL_CLK_GPT_3M] = imx_clk_hw_fixed_factor("gpt_3m", "osc", 1, 8);
|
|
|
|
np = ccm_node;
|
|
base = of_iomap(np, 0);
|
|
WARN_ON(!base);
|
|
|
|
hws[IMX6UL_CA7_SECONDARY_SEL] = imx_clk_hw_mux("ca7_secondary_sel", base + 0xc, 3, 1, ca7_secondary_sels, ARRAY_SIZE(ca7_secondary_sels));
|
|
hws[IMX6UL_CLK_STEP] = imx_clk_hw_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels));
|
|
hws[IMX6UL_CLK_PLL1_SW] = imx_clk_hw_mux_flags("pll1_sw", base + 0x0c, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0);
|
|
hws[IMX6UL_CLK_AXI_ALT_SEL] = imx_clk_hw_mux("axi_alt_sel", base + 0x14, 7, 1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels));
|
|
hws[IMX6UL_CLK_AXI_SEL] = imx_clk_hw_mux_flags("axi_sel", base + 0x14, 6, 1, axi_sels, ARRAY_SIZE(axi_sels), 0);
|
|
hws[IMX6UL_CLK_PERIPH_PRE] = imx_clk_hw_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
|
|
hws[IMX6UL_CLK_PERIPH2_PRE] = imx_clk_hw_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
|
|
hws[IMX6UL_CLK_PERIPH_CLK2_SEL] = imx_clk_hw_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
|
|
hws[IMX6UL_CLK_PERIPH2_CLK2_SEL] = imx_clk_hw_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
|
|
hws[IMX6UL_CLK_EIM_SLOW_SEL] = imx_clk_hw_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
|
|
hws[IMX6UL_CLK_GPMI_SEL] = imx_clk_hw_mux("gpmi_sel", base + 0x1c, 19, 1, gpmi_sels, ARRAY_SIZE(gpmi_sels));
|
|
hws[IMX6UL_CLK_BCH_SEL] = imx_clk_hw_mux("bch_sel", base + 0x1c, 18, 1, bch_sels, ARRAY_SIZE(bch_sels));
|
|
hws[IMX6UL_CLK_USDHC2_SEL] = imx_clk_hw_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
|
|
hws[IMX6UL_CLK_USDHC1_SEL] = imx_clk_hw_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
|
|
hws[IMX6UL_CLK_SAI3_SEL] = imx_clk_hw_mux("sai3_sel", base + 0x1c, 14, 2, sai_sels, ARRAY_SIZE(sai_sels));
|
|
hws[IMX6UL_CLK_SAI2_SEL] = imx_clk_hw_mux("sai2_sel", base + 0x1c, 12, 2, sai_sels, ARRAY_SIZE(sai_sels));
|
|
hws[IMX6UL_CLK_SAI1_SEL] = imx_clk_hw_mux("sai1_sel", base + 0x1c, 10, 2, sai_sels, ARRAY_SIZE(sai_sels));
|
|
hws[IMX6UL_CLK_QSPI1_SEL] = imx_clk_hw_mux("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels));
|
|
hws[IMX6UL_CLK_PERCLK_SEL] = imx_clk_hw_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels));
|
|
hws[IMX6UL_CLK_CAN_SEL] = imx_clk_hw_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels));
|
|
if (clk_on_imx6ull())
|
|
hws[IMX6ULL_CLK_ESAI_SEL] = imx_clk_hw_mux("esai_sel", base + 0x20, 19, 2, esai_sels, ARRAY_SIZE(esai_sels));
|
|
hws[IMX6UL_CLK_UART_SEL] = imx_clk_hw_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels));
|
|
hws[IMX6UL_CLK_ENFC_SEL] = imx_clk_hw_mux("enfc_sel", base + 0x2c, 15, 3, enfc_sels, ARRAY_SIZE(enfc_sels));
|
|
hws[IMX6UL_CLK_LDB_DI0_SEL] = imx_clk_hw_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels));
|
|
hws[IMX6UL_CLK_SPDIF_SEL] = imx_clk_hw_mux("spdif_sel", base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels));
|
|
if (clk_on_imx6ul()) {
|
|
hws[IMX6UL_CLK_SIM_PRE_SEL] = imx_clk_hw_mux("sim_pre_sel", base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels));
|
|
hws[IMX6UL_CLK_SIM_SEL] = imx_clk_hw_mux("sim_sel", base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels));
|
|
} else if (clk_on_imx6ull()) {
|
|
hws[IMX6ULL_CLK_EPDC_PRE_SEL] = imx_clk_hw_mux("epdc_pre_sel", base + 0x34, 15, 3, epdc_pre_sels, ARRAY_SIZE(epdc_pre_sels));
|
|
hws[IMX6ULL_CLK_EPDC_SEL] = imx_clk_hw_mux("epdc_sel", base + 0x34, 9, 3, epdc_sels, ARRAY_SIZE(epdc_sels));
|
|
}
|
|
hws[IMX6UL_CLK_ECSPI_SEL] = imx_clk_hw_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
|
|
hws[IMX6UL_CLK_LCDIF_PRE_SEL] = imx_clk_hw_mux_flags("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels), CLK_SET_RATE_PARENT);
|
|
hws[IMX6UL_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
|
|
|
|
hws[IMX6UL_CLK_LDB_DI0_DIV_SEL] = imx_clk_hw_mux("ldb_di0", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels));
|
|
hws[IMX6UL_CLK_LDB_DI1_DIV_SEL] = imx_clk_hw_mux("ldb_di1", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels));
|
|
|
|
hws[IMX6UL_CLK_CKO1_SEL] = imx_clk_hw_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
|
|
hws[IMX6UL_CLK_CKO2_SEL] = imx_clk_hw_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
|
|
hws[IMX6UL_CLK_CKO] = imx_clk_hw_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
|
|
|
|
hws[IMX6UL_CLK_LDB_DI0_DIV_3_5] = imx_clk_hw_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
|
|
hws[IMX6UL_CLK_LDB_DI0_DIV_7] = imx_clk_hw_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7);
|
|
hws[IMX6UL_CLK_LDB_DI1_DIV_3_5] = imx_clk_hw_fixed_factor("ldb_di1_div_3_5", "qspi1_sel", 2, 7);
|
|
hws[IMX6UL_CLK_LDB_DI1_DIV_7] = imx_clk_hw_fixed_factor("ldb_di1_div_7", "qspi1_sel", 1, 7);
|
|
|
|
hws[IMX6UL_CLK_PERIPH] = imx_clk_hw_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
|
|
hws[IMX6UL_CLK_PERIPH2] = imx_clk_hw_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
|
|
|
|
hws[IMX6UL_CLK_PERIPH_CLK2] = imx_clk_hw_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
|
|
hws[IMX6UL_CLK_PERIPH2_CLK2] = imx_clk_hw_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
|
|
hws[IMX6UL_CLK_IPG] = imx_clk_hw_divider("ipg", "ahb", base + 0x14, 8, 2);
|
|
hws[IMX6UL_CLK_LCDIF_PODF] = imx_clk_hw_divider("lcdif_podf", "lcdif_pred", base + 0x18, 23, 3);
|
|
hws[IMX6UL_CLK_QSPI1_PDOF] = imx_clk_hw_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3);
|
|
hws[IMX6UL_CLK_EIM_SLOW_PODF] = imx_clk_hw_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3);
|
|
hws[IMX6UL_CLK_PERCLK] = imx_clk_hw_divider("perclk", "perclk_sel", base + 0x1c, 0, 6);
|
|
hws[IMX6UL_CLK_CAN_PODF] = imx_clk_hw_divider("can_podf", "can_sel", base + 0x20, 2, 6);
|
|
hws[IMX6UL_CLK_GPMI_PODF] = imx_clk_hw_divider("gpmi_podf", "gpmi_sel", base + 0x24, 22, 3);
|
|
hws[IMX6UL_CLK_BCH_PODF] = imx_clk_hw_divider("bch_podf", "bch_sel", base + 0x24, 19, 3);
|
|
hws[IMX6UL_CLK_USDHC2_PODF] = imx_clk_hw_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
|
|
hws[IMX6UL_CLK_USDHC1_PODF] = imx_clk_hw_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
|
|
hws[IMX6UL_CLK_UART_PODF] = imx_clk_hw_divider("uart_podf", "uart_sel", base + 0x24, 0, 6);
|
|
hws[IMX6UL_CLK_SAI3_PRED] = imx_clk_hw_divider("sai3_pred", "sai3_sel", base + 0x28, 22, 3);
|
|
hws[IMX6UL_CLK_SAI3_PODF] = imx_clk_hw_divider("sai3_podf", "sai3_pred", base + 0x28, 16, 6);
|
|
hws[IMX6UL_CLK_SAI1_PRED] = imx_clk_hw_divider("sai1_pred", "sai1_sel", base + 0x28, 6, 3);
|
|
hws[IMX6UL_CLK_SAI1_PODF] = imx_clk_hw_divider("sai1_podf", "sai1_pred", base + 0x28, 0, 6);
|
|
if (clk_on_imx6ull()) {
|
|
hws[IMX6ULL_CLK_ESAI_PRED] = imx_clk_hw_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
|
|
hws[IMX6ULL_CLK_ESAI_PODF] = imx_clk_hw_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
|
|
}
|
|
hws[IMX6UL_CLK_ENFC_PRED] = imx_clk_hw_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
|
|
hws[IMX6UL_CLK_ENFC_PODF] = imx_clk_hw_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
|
|
hws[IMX6UL_CLK_SAI2_PRED] = imx_clk_hw_divider("sai2_pred", "sai2_sel", base + 0x2c, 6, 3);
|
|
hws[IMX6UL_CLK_SAI2_PODF] = imx_clk_hw_divider("sai2_podf", "sai2_pred", base + 0x2c, 0, 6);
|
|
hws[IMX6UL_CLK_SPDIF_PRED] = imx_clk_hw_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
|
|
hws[IMX6UL_CLK_SPDIF_PODF] = imx_clk_hw_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
|
|
if (clk_on_imx6ul())
|
|
hws[IMX6UL_CLK_SIM_PODF] = imx_clk_hw_divider("sim_podf", "sim_pre_sel", base + 0x34, 12, 3);
|
|
else if (clk_on_imx6ull())
|
|
hws[IMX6ULL_CLK_EPDC_PODF] = imx_clk_hw_divider("epdc_podf", "epdc_pre_sel", base + 0x34, 12, 3);
|
|
hws[IMX6UL_CLK_ECSPI_PODF] = imx_clk_hw_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6);
|
|
hws[IMX6UL_CLK_LCDIF_PRED] = imx_clk_hw_divider("lcdif_pred", "lcdif_pre_sel", base + 0x38, 12, 3);
|
|
hws[IMX6UL_CLK_CSI_PODF] = imx_clk_hw_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3);
|
|
|
|
hws[IMX6UL_CLK_CKO1_PODF] = imx_clk_hw_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
|
|
hws[IMX6UL_CLK_CKO2_PODF] = imx_clk_hw_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
|
|
|
|
hws[IMX6UL_CLK_ARM] = imx_clk_hw_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
|
|
hws[IMX6UL_CLK_MMDC_PODF] = imx_clk_hw_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
|
|
hws[IMX6UL_CLK_AXI_PODF] = imx_clk_hw_busy_divider("axi_podf", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
|
|
hws[IMX6UL_CLK_AHB] = imx_clk_hw_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
|
|
|
|
/* CCGR0 */
|
|
hws[IMX6UL_CLK_AIPSTZ1] = imx_clk_hw_gate2_flags("aips_tz1", "ahb", base + 0x68, 0, CLK_IS_CRITICAL);
|
|
hws[IMX6UL_CLK_AIPSTZ2] = imx_clk_hw_gate2_flags("aips_tz2", "ahb", base + 0x68, 2, CLK_IS_CRITICAL);
|
|
hws[IMX6UL_CLK_APBHDMA] = imx_clk_hw_gate2("apbh_dma", "bch_podf", base + 0x68, 4);
|
|
hws[IMX6UL_CLK_ASRC_IPG] = imx_clk_hw_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc);
|
|
hws[IMX6UL_CLK_ASRC_MEM] = imx_clk_hw_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc);
|
|
if (clk_on_imx6ul()) {
|
|
hws[IMX6UL_CLK_CAAM_MEM] = imx_clk_hw_gate2("caam_mem", "ahb", base + 0x68, 8);
|
|
hws[IMX6UL_CLK_CAAM_ACLK] = imx_clk_hw_gate2("caam_aclk", "ahb", base + 0x68, 10);
|
|
hws[IMX6UL_CLK_CAAM_IPG] = imx_clk_hw_gate2("caam_ipg", "ipg", base + 0x68, 12);
|
|
} else if (clk_on_imx6ull()) {
|
|
hws[IMX6ULL_CLK_DCP_CLK] = imx_clk_hw_gate2("dcp", "ahb", base + 0x68, 10);
|
|
hws[IMX6UL_CLK_ENET] = imx_clk_hw_gate2("enet", "ipg", base + 0x68, 12);
|
|
hws[IMX6UL_CLK_ENET_AHB] = imx_clk_hw_gate2("enet_ahb", "ahb", base + 0x68, 12);
|
|
}
|
|
hws[IMX6UL_CLK_CAN1_IPG] = imx_clk_hw_gate2("can1_ipg", "ipg", base + 0x68, 14);
|
|
hws[IMX6UL_CLK_CAN1_SERIAL] = imx_clk_hw_gate2("can1_serial", "can_podf", base + 0x68, 16);
|
|
hws[IMX6UL_CLK_CAN2_IPG] = imx_clk_hw_gate2("can2_ipg", "ipg", base + 0x68, 18);
|
|
hws[IMX6UL_CLK_CAN2_SERIAL] = imx_clk_hw_gate2("can2_serial", "can_podf", base + 0x68, 20);
|
|
hws[IMX6UL_CLK_GPT2_BUS] = imx_clk_hw_gate2("gpt2_bus", "perclk", base + 0x68, 24);
|
|
hws[IMX6UL_CLK_GPT2_SERIAL] = imx_clk_hw_gate2("gpt2_serial", "perclk", base + 0x68, 26);
|
|
hws[IMX6UL_CLK_UART2_IPG] = imx_clk_hw_gate2("uart2_ipg", "ipg", base + 0x68, 28);
|
|
hws[IMX6UL_CLK_UART2_SERIAL] = imx_clk_hw_gate2("uart2_serial", "uart_podf", base + 0x68, 28);
|
|
if (clk_on_imx6ull())
|
|
hws[IMX6UL_CLK_AIPSTZ3] = imx_clk_hw_gate2("aips_tz3", "ahb", base + 0x80, 18);
|
|
hws[IMX6UL_CLK_GPIO2] = imx_clk_hw_gate2("gpio2", "ipg", base + 0x68, 30);
|
|
|
|
/* CCGR1 */
|
|
hws[IMX6UL_CLK_ECSPI1] = imx_clk_hw_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
|
|
hws[IMX6UL_CLK_ECSPI2] = imx_clk_hw_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2);
|
|
hws[IMX6UL_CLK_ECSPI3] = imx_clk_hw_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4);
|
|
hws[IMX6UL_CLK_ECSPI4] = imx_clk_hw_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6);
|
|
hws[IMX6UL_CLK_ADC2] = imx_clk_hw_gate2("adc2", "ipg", base + 0x6c, 8);
|
|
hws[IMX6UL_CLK_UART3_IPG] = imx_clk_hw_gate2("uart3_ipg", "ipg", base + 0x6c, 10);
|
|
hws[IMX6UL_CLK_UART3_SERIAL] = imx_clk_hw_gate2("uart3_serial", "uart_podf", base + 0x6c, 10);
|
|
hws[IMX6UL_CLK_EPIT1] = imx_clk_hw_gate2("epit1", "perclk", base + 0x6c, 12);
|
|
hws[IMX6UL_CLK_EPIT2] = imx_clk_hw_gate2("epit2", "perclk", base + 0x6c, 14);
|
|
hws[IMX6UL_CLK_ADC1] = imx_clk_hw_gate2("adc1", "ipg", base + 0x6c, 16);
|
|
hws[IMX6UL_CLK_GPT1_BUS] = imx_clk_hw_gate2("gpt1_bus", "perclk", base + 0x6c, 20);
|
|
hws[IMX6UL_CLK_GPT1_SERIAL] = imx_clk_hw_gate2("gpt1_serial", "perclk", base + 0x6c, 22);
|
|
hws[IMX6UL_CLK_UART4_IPG] = imx_clk_hw_gate2("uart4_ipg", "ipg", base + 0x6c, 24);
|
|
hws[IMX6UL_CLK_UART4_SERIAL] = imx_clk_hw_gate2("uart4_serial", "uart_podf", base + 0x6c, 24);
|
|
hws[IMX6UL_CLK_GPIO1] = imx_clk_hw_gate2("gpio1", "ipg", base + 0x6c, 26);
|
|
hws[IMX6UL_CLK_GPIO5] = imx_clk_hw_gate2("gpio5", "ipg", base + 0x6c, 30);
|
|
|
|
/* CCGR2 */
|
|
if (clk_on_imx6ull()) {
|
|
hws[IMX6ULL_CLK_ESAI_EXTAL] = imx_clk_hw_gate2_shared("esai_extal", "esai_podf", base + 0x70, 0, &share_count_esai);
|
|
hws[IMX6ULL_CLK_ESAI_IPG] = imx_clk_hw_gate2_shared("esai_ipg", "ahb", base + 0x70, 0, &share_count_esai);
|
|
hws[IMX6ULL_CLK_ESAI_MEM] = imx_clk_hw_gate2_shared("esai_mem", "ahb", base + 0x70, 0, &share_count_esai);
|
|
}
|
|
hws[IMX6UL_CLK_CSI] = imx_clk_hw_gate2("csi", "csi_podf", base + 0x70, 2);
|
|
hws[IMX6UL_CLK_I2C1] = imx_clk_hw_gate2("i2c1", "perclk", base + 0x70, 6);
|
|
hws[IMX6UL_CLK_I2C2] = imx_clk_hw_gate2("i2c2", "perclk", base + 0x70, 8);
|
|
hws[IMX6UL_CLK_I2C3] = imx_clk_hw_gate2("i2c3", "perclk", base + 0x70, 10);
|
|
hws[IMX6UL_CLK_OCOTP] = imx_clk_hw_gate2("ocotp", "ipg", base + 0x70, 12);
|
|
hws[IMX6UL_CLK_IOMUXC] = imx_clk_hw_gate2("iomuxc", "lcdif_podf", base + 0x70, 14);
|
|
hws[IMX6UL_CLK_GPIO3] = imx_clk_hw_gate2("gpio3", "ipg", base + 0x70, 26);
|
|
hws[IMX6UL_CLK_LCDIF_APB] = imx_clk_hw_gate2("lcdif_apb", "axi", base + 0x70, 28);
|
|
hws[IMX6UL_CLK_PXP] = imx_clk_hw_gate2("pxp", "axi", base + 0x70, 30);
|
|
|
|
/* CCGR3 */
|
|
hws[IMX6UL_CLK_UART5_IPG] = imx_clk_hw_gate2("uart5_ipg", "ipg", base + 0x74, 2);
|
|
hws[IMX6UL_CLK_UART5_SERIAL] = imx_clk_hw_gate2("uart5_serial", "uart_podf", base + 0x74, 2);
|
|
if (clk_on_imx6ul()) {
|
|
hws[IMX6UL_CLK_ENET] = imx_clk_hw_gate2("enet", "ipg", base + 0x74, 4);
|
|
hws[IMX6UL_CLK_ENET_AHB] = imx_clk_hw_gate2("enet_ahb", "ahb", base + 0x74, 4);
|
|
} else if (clk_on_imx6ull()) {
|
|
hws[IMX6ULL_CLK_EPDC_ACLK] = imx_clk_hw_gate2("epdc_aclk", "axi", base + 0x74, 4);
|
|
hws[IMX6ULL_CLK_EPDC_PIX] = imx_clk_hw_gate2("epdc_pix", "epdc_podf", base + 0x74, 4);
|
|
}
|
|
hws[IMX6UL_CLK_UART6_IPG] = imx_clk_hw_gate2("uart6_ipg", "ipg", base + 0x74, 6);
|
|
hws[IMX6UL_CLK_UART6_SERIAL] = imx_clk_hw_gate2("uart6_serial", "uart_podf", base + 0x74, 6);
|
|
hws[IMX6UL_CLK_LCDIF_PIX] = imx_clk_hw_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10);
|
|
hws[IMX6UL_CLK_GPIO4] = imx_clk_hw_gate2("gpio4", "ipg", base + 0x74, 12);
|
|
hws[IMX6UL_CLK_QSPI] = imx_clk_hw_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
|
|
hws[IMX6UL_CLK_WDOG1] = imx_clk_hw_gate2("wdog1", "ipg", base + 0x74, 16);
|
|
hws[IMX6UL_CLK_MMDC_P0_FAST] = imx_clk_hw_gate_flags("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20, CLK_IS_CRITICAL);
|
|
hws[IMX6UL_CLK_MMDC_P0_IPG] = imx_clk_hw_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL);
|
|
hws[IMX6UL_CLK_MMDC_P1_IPG] = imx_clk_hw_gate2_flags("mmdc_p1_ipg", "ipg", base + 0x74, 26, CLK_IS_CRITICAL);
|
|
hws[IMX6UL_CLK_AXI] = imx_clk_hw_gate_flags("axi", "axi_podf", base + 0x74, 28, CLK_IS_CRITICAL);
|
|
|
|
/* CCGR4 */
|
|
hws[IMX6UL_CLK_PER_BCH] = imx_clk_hw_gate2("per_bch", "bch_podf", base + 0x78, 12);
|
|
hws[IMX6UL_CLK_PWM1] = imx_clk_hw_gate2("pwm1", "perclk", base + 0x78, 16);
|
|
hws[IMX6UL_CLK_PWM2] = imx_clk_hw_gate2("pwm2", "perclk", base + 0x78, 18);
|
|
hws[IMX6UL_CLK_PWM3] = imx_clk_hw_gate2("pwm3", "perclk", base + 0x78, 20);
|
|
hws[IMX6UL_CLK_PWM4] = imx_clk_hw_gate2("pwm4", "perclk", base + 0x78, 22);
|
|
hws[IMX6UL_CLK_GPMI_BCH_APB] = imx_clk_hw_gate2("gpmi_bch_apb", "bch_podf", base + 0x78, 24);
|
|
hws[IMX6UL_CLK_GPMI_BCH] = imx_clk_hw_gate2("gpmi_bch", "gpmi_podf", base + 0x78, 26);
|
|
hws[IMX6UL_CLK_GPMI_IO] = imx_clk_hw_gate2("gpmi_io", "enfc_podf", base + 0x78, 28);
|
|
hws[IMX6UL_CLK_GPMI_APB] = imx_clk_hw_gate2("gpmi_apb", "bch_podf", base + 0x78, 30);
|
|
|
|
/* CCGR5 */
|
|
hws[IMX6UL_CLK_ROM] = imx_clk_hw_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL);
|
|
hws[IMX6UL_CLK_SDMA] = imx_clk_hw_gate2("sdma", "ahb", base + 0x7c, 6);
|
|
hws[IMX6UL_CLK_KPP] = imx_clk_hw_gate2("kpp", "ipg", base + 0x7c, 8);
|
|
hws[IMX6UL_CLK_WDOG2] = imx_clk_hw_gate2("wdog2", "ipg", base + 0x7c, 10);
|
|
hws[IMX6UL_CLK_SPBA] = imx_clk_hw_gate2("spba", "ipg", base + 0x7c, 12);
|
|
hws[IMX6UL_CLK_SPDIF] = imx_clk_hw_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio);
|
|
hws[IMX6UL_CLK_SPDIF_GCLK] = imx_clk_hw_gate2_shared("spdif_gclk", "ipg", base + 0x7c, 14, &share_count_audio);
|
|
hws[IMX6UL_CLK_SAI3] = imx_clk_hw_gate2_shared("sai3", "sai3_podf", base + 0x7c, 22, &share_count_sai3);
|
|
hws[IMX6UL_CLK_SAI3_IPG] = imx_clk_hw_gate2_shared("sai3_ipg", "ipg", base + 0x7c, 22, &share_count_sai3);
|
|
hws[IMX6UL_CLK_UART1_IPG] = imx_clk_hw_gate2("uart1_ipg", "ipg", base + 0x7c, 24);
|
|
hws[IMX6UL_CLK_UART1_SERIAL] = imx_clk_hw_gate2("uart1_serial", "uart_podf", base + 0x7c, 24);
|
|
hws[IMX6UL_CLK_UART7_IPG] = imx_clk_hw_gate2("uart7_ipg", "ipg", base + 0x7c, 26);
|
|
hws[IMX6UL_CLK_UART7_SERIAL] = imx_clk_hw_gate2("uart7_serial", "uart_podf", base + 0x7c, 26);
|
|
hws[IMX6UL_CLK_SAI1] = imx_clk_hw_gate2_shared("sai1", "sai1_podf", base + 0x7c, 28, &share_count_sai1);
|
|
hws[IMX6UL_CLK_SAI1_IPG] = imx_clk_hw_gate2_shared("sai1_ipg", "ipg", base + 0x7c, 28, &share_count_sai1);
|
|
hws[IMX6UL_CLK_SAI2] = imx_clk_hw_gate2_shared("sai2", "sai2_podf", base + 0x7c, 30, &share_count_sai2);
|
|
hws[IMX6UL_CLK_SAI2_IPG] = imx_clk_hw_gate2_shared("sai2_ipg", "ipg", base + 0x7c, 30, &share_count_sai2);
|
|
|
|
/* CCGR6 */
|
|
hws[IMX6UL_CLK_USBOH3] = imx_clk_hw_gate2("usboh3", "ipg", base + 0x80, 0);
|
|
hws[IMX6UL_CLK_USDHC1] = imx_clk_hw_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
|
|
hws[IMX6UL_CLK_USDHC2] = imx_clk_hw_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
|
|
if (clk_on_imx6ul()) {
|
|
hws[IMX6UL_CLK_SIM1] = imx_clk_hw_gate2("sim1", "sim_sel", base + 0x80, 6);
|
|
hws[IMX6UL_CLK_SIM2] = imx_clk_hw_gate2("sim2", "sim_sel", base + 0x80, 8);
|
|
}
|
|
hws[IMX6UL_CLK_EIM] = imx_clk_hw_gate2("eim", "eim_slow_podf", base + 0x80, 10);
|
|
hws[IMX6UL_CLK_PWM8] = imx_clk_hw_gate2("pwm8", "perclk", base + 0x80, 16);
|
|
hws[IMX6UL_CLK_UART8_IPG] = imx_clk_hw_gate2("uart8_ipg", "ipg", base + 0x80, 14);
|
|
hws[IMX6UL_CLK_UART8_SERIAL] = imx_clk_hw_gate2("uart8_serial", "uart_podf", base + 0x80, 14);
|
|
hws[IMX6UL_CLK_WDOG3] = imx_clk_hw_gate2("wdog3", "ipg", base + 0x80, 20);
|
|
hws[IMX6UL_CLK_I2C4] = imx_clk_hw_gate2("i2c4", "perclk", base + 0x80, 24);
|
|
hws[IMX6UL_CLK_PWM5] = imx_clk_hw_gate2("pwm5", "perclk", base + 0x80, 26);
|
|
hws[IMX6UL_CLK_PWM6] = imx_clk_hw_gate2("pwm6", "perclk", base + 0x80, 28);
|
|
hws[IMX6UL_CLK_PWM7] = imx_clk_hw_gate2("pwm7", "perclk", base + 0x80, 30);
|
|
|
|
/* CCOSR */
|
|
hws[IMX6UL_CLK_CKO1] = imx_clk_hw_gate("cko1", "cko1_podf", base + 0x60, 7);
|
|
hws[IMX6UL_CLK_CKO2] = imx_clk_hw_gate("cko2", "cko2_podf", base + 0x60, 24);
|
|
|
|
/* mask handshake of mmdc */
|
|
imx_mmdc_mask_handshake(base, 0);
|
|
|
|
imx_check_clk_hws(hws, IMX6UL_CLK_END);
|
|
|
|
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
|
|
|
|
/*
|
|
* Lower the AHB clock rate before changing the parent clock source,
|
|
* as AHB clock rate can NOT be higher than 133MHz, but its parent
|
|
* will be switched from 396MHz PFD to 528MHz PLL in order to increase
|
|
* AXI clock rate, so we need to lower AHB rate first to make sure at
|
|
* any time, AHB rate is <= 133MHz.
|
|
*/
|
|
clk_set_rate(hws[IMX6UL_CLK_AHB]->clk, 99000000);
|
|
|
|
/* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */
|
|
clk_set_parent(hws[IMX6UL_CLK_PERIPH_CLK2_SEL]->clk, hws[IMX6UL_CLK_OSC]->clk);
|
|
clk_set_parent(hws[IMX6UL_CLK_PERIPH]->clk, hws[IMX6UL_CLK_PERIPH_CLK2]->clk);
|
|
clk_set_parent(hws[IMX6UL_CLK_PERIPH_PRE]->clk, hws[IMX6UL_CLK_PLL2_BUS]->clk);
|
|
clk_set_parent(hws[IMX6UL_CLK_PERIPH]->clk, hws[IMX6UL_CLK_PERIPH_PRE]->clk);
|
|
|
|
/* Make sure AHB rate is 132MHz */
|
|
clk_set_rate(hws[IMX6UL_CLK_AHB]->clk, 132000000);
|
|
|
|
/* set perclk to from OSC */
|
|
clk_set_parent(hws[IMX6UL_CLK_PERCLK_SEL]->clk, hws[IMX6UL_CLK_OSC]->clk);
|
|
|
|
clk_set_rate(hws[IMX6UL_CLK_ENET_REF]->clk, 50000000);
|
|
clk_set_rate(hws[IMX6UL_CLK_ENET2_REF]->clk, 50000000);
|
|
clk_set_rate(hws[IMX6UL_CLK_CSI]->clk, 24000000);
|
|
|
|
if (clk_on_imx6ull())
|
|
clk_prepare_enable(hws[IMX6UL_CLK_AIPSTZ3]->clk);
|
|
|
|
if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
|
|
clk_prepare_enable(hws[IMX6UL_CLK_USBPHY1_GATE]->clk);
|
|
clk_prepare_enable(hws[IMX6UL_CLK_USBPHY2_GATE]->clk);
|
|
}
|
|
|
|
clk_set_parent(hws[IMX6UL_CLK_CAN_SEL]->clk, hws[IMX6UL_CLK_PLL3_80M]->clk);
|
|
if (clk_on_imx6ul())
|
|
clk_set_parent(hws[IMX6UL_CLK_SIM_PRE_SEL]->clk, hws[IMX6UL_CLK_PLL3_USB_OTG]->clk);
|
|
else if (clk_on_imx6ull())
|
|
clk_set_parent(hws[IMX6ULL_CLK_EPDC_PRE_SEL]->clk, hws[IMX6UL_CLK_PLL3_PFD2]->clk);
|
|
|
|
clk_set_parent(hws[IMX6UL_CLK_ENFC_SEL]->clk, hws[IMX6UL_CLK_PLL2_PFD2]->clk);
|
|
}
|
|
|
|
CLK_OF_DECLARE(imx6ul, "fsl,imx6ul-ccm", imx6ul_clocks_init);
|