mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 18:41:23 +00:00
821f7ce79f
New device support * ad7091r5 ADC - New driver with follow up patch adding scale and vref support. - DT bindings * ad7923 - Support for ad7908, ad7918 and ad7928 added to driver. * bma180 - Support the BMA254 accelerometer. Required fairly substantial rework to allow for small differences between this an existing parts. * bma400 accelerometer - New driver with follow up patch for regulator support. - DT bindings. * asc dlhl60d - New driver support this range of pressure and temperature sensors. - DT bindings. * ltc2496 ADC - New driver to support this ADC. - Split the existing LTC2497 driver generic component out and reuse. - DT bindings. * parallax ping - New driver supporting ultrasonic and laser tof distance sensors. - Bindings for these sensors. New features * core - New char type for read_raw returns, used for thermocouple types. - Rename read_first_n callback to read. The reasons behind the original naming are lost to the mists of time. * ad799x - Allow pm_ops to disable device completely allowing regulator power down. * bma180 - Enable basic regulator support. * dmaengine buffer - Report platform data alignment requirements via new ABI. * max31856 - Add option to set mains filter rejection frequency and document new in_temp_filter_notch_center_frequency ABI. - Add support for configuring HW averaging (oversampling ratio) - Add runtime configuration of thermocouple type and document new ABI. * maxim-thermocouple - Add read only access to thermocouple type using new ABI, includes adding more specific compatibles to reflect which variant of the chip is being used. * mpu6050 - Provide option to support the PMU9150 in package magnetometer directly rather than via auxiliary bus. * stm32_adc - Add overrun interrupt checks to detect if this happens. * st_lsm6dsx - Enable the sensor-hub support for lsm6dsm. Includes various reworks to allow this. Cleanups and minor fixes * Subsystem wide - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. * ad7266 - Convert to GPIO descriptors. * ad7303 - Avoid a dance with checking if the regulator is supplied by just using the optional request interface. * ad7887 - Simplify channel specification assignment to enable adding more devices. * ad7923 - Drop some unused and largely pointless defines of BOB_N==N variety. - Tidy up checkpatch warnings. - Add missing of_device_id table. * adf4350 - Convert to GPIO descriptors. * ak8975 - Convert to GPIO descriptors. * ADIS library and drivers - Expand scope of txrx_lock to cover all state and rename as state_lock - Add unlocked read / write to allow grouping of consecutive calls under single lock / unlock. - Add unlocked check_status, reset to allow grouping under single lock / unlock. - Remove remaining uses of core mlock for local state protection. mlock should never be used directly as it protects tightly defined core IIO device management state. * adis16240 - Enforce only supported SPI mode on driver load + add DT binding doc. * atlas-ph-sensor - Rename to atlas-sensor given it now covers things beyond ph sensors. * bma180 - Use local dev variable to tidy up code. - Use c99 style explicity .member assignment to make driver more readable. * bmp280 - Drop ACPI support. No evidence this was used and appropriate ID is not registered. - Allow ACPI to bind device via PRP0001 * dmaengine buffer - Use dma_request_chan instead of dma_request_slave_channel_reason as that ABI is going away. - Add module info to avoid tainting the kernel. * hts221 - Avoid magic number defines when only used to fill structure elements that are self describing. * lm3533 - Drop a stray semicolon. * max9611 - Cleanup enum handling to be more resilient to future changes. * mpu6050 - Delete MPU9150 from supported SPI devices as doesn't provide SPI. - Select I2C_MUX again after kbuild issue fixed elsewhere. * stm32-timer - Drop an unnecessary register update. * ssp_sensors - Convert to GPIO descriptors. * st_sensors - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used anyway. - Make default platform data structures __maybe_unsued. - Fill in some missing kernel-doc function parameters. * st_lsm6dsx - white space fixes. - Mark some constants that aren't always used as __maybe_unused. - Drop of ID table guards as they just pervent use under ACPI. - Switch to device properties to allow ACPI usage. * st_uvis25 - Drop acpi.h include as no ACPI APIs used. * ti-ads1015 - Drop legacy platform data as no one seems to be using it. - Use the device property API instead of OF specific. * ti-ads7950 - typo fix in error message. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl4R2mwRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Fogfow//Rfsrd2oiAwy4ypm70ZWGnr84C3O/Vpic Agwdd2/lHiCA2Gjg+n7ZT6XkKQmKiojuBMT05PuskEm5onJVQuSAKMVppXwU6UDP uOUS5MAbo87GLogzXJnAR/eCrx/VkC4UqFRBSi7IUIj+lTpjiOhmoqm78VTMxkgT hvp5PVN/mLNxNV3eVrR9uILjZLpbBjKjWil00IS2zj0o78sGtd2QtMIdTbn3iBLp m0ngCDww1KDH+idwbOIn8YX8GSK8mTjNV5q4r9+xnjoAk8RPk+H317idyRHCKfCM wWFSFB6u/oqtHXRgQVi3ndRrZnPLTycA/R20f3ezzhVYZzf3RpH8Upcx0lqqCmrB +ZTbYW1L7KL6zCSR4ZYIEmw2TeQngfCGy0yDoEDXm9V8/B2nGWFc3Iknq+fK415V 7OgJCWAw6ybF2LZfJHpcuJTb0EPxCKnInHbRsaxCsSAPRyERSdAz8RLn3lpH/k2D X32Q9hz/6sXKzIAD1Y0jv8ll28D5S7d2FgaWufy1tpB+CMb0Mp0RQn+Ho8lNMh70 Zh9SF8RvknAiCT9iHeVIdbJxoYEtMuCaDwScliukVcg12gVViY5VzXMbSV/4jCnZ bAVZDpcM3LVLxCGbWqCNxjQ9wle99LsVHRld/KDpOfI6VIYDb8Y900Nf6efkQkAs a6z6rhpVdDg= =8FmM -----END PGP SIGNATURE----- Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.6 cycle New device support * ad7091r5 ADC - New driver with follow up patch adding scale and vref support. - DT bindings * ad7923 - Support for ad7908, ad7918 and ad7928 added to driver. * bma180 - Support the BMA254 accelerometer. Required fairly substantial rework to allow for small differences between this an existing parts. * bma400 accelerometer - New driver with follow up patch for regulator support. - DT bindings. * asc dlhl60d - New driver support this range of pressure and temperature sensors. - DT bindings. * ltc2496 ADC - New driver to support this ADC. - Split the existing LTC2497 driver generic component out and reuse. - DT bindings. * parallax ping - New driver supporting ultrasonic and laser tof distance sensors. - Bindings for these sensors. New features * core - New char type for read_raw returns, used for thermocouple types. - Rename read_first_n callback to read. The reasons behind the original naming are lost to the mists of time. * ad799x - Allow pm_ops to disable device completely allowing regulator power down. * bma180 - Enable basic regulator support. * dmaengine buffer - Report platform data alignment requirements via new ABI. * max31856 - Add option to set mains filter rejection frequency and document new in_temp_filter_notch_center_frequency ABI. - Add support for configuring HW averaging (oversampling ratio) - Add runtime configuration of thermocouple type and document new ABI. * maxim-thermocouple - Add read only access to thermocouple type using new ABI, includes adding more specific compatibles to reflect which variant of the chip is being used. * mpu6050 - Provide option to support the PMU9150 in package magnetometer directly rather than via auxiliary bus. * stm32_adc - Add overrun interrupt checks to detect if this happens. * st_lsm6dsx - Enable the sensor-hub support for lsm6dsm. Includes various reworks to allow this. Cleanups and minor fixes * Subsystem wide - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. * ad7266 - Convert to GPIO descriptors. * ad7303 - Avoid a dance with checking if the regulator is supplied by just using the optional request interface. * ad7887 - Simplify channel specification assignment to enable adding more devices. * ad7923 - Drop some unused and largely pointless defines of BOB_N==N variety. - Tidy up checkpatch warnings. - Add missing of_device_id table. * adf4350 - Convert to GPIO descriptors. * ak8975 - Convert to GPIO descriptors. * ADIS library and drivers - Expand scope of txrx_lock to cover all state and rename as state_lock - Add unlocked read / write to allow grouping of consecutive calls under single lock / unlock. - Add unlocked check_status, reset to allow grouping under single lock / unlock. - Remove remaining uses of core mlock for local state protection. mlock should never be used directly as it protects tightly defined core IIO device management state. * adis16240 - Enforce only supported SPI mode on driver load + add DT binding doc. * atlas-ph-sensor - Rename to atlas-sensor given it now covers things beyond ph sensors. * bma180 - Use local dev variable to tidy up code. - Use c99 style explicity .member assignment to make driver more readable. * bmp280 - Drop ACPI support. No evidence this was used and appropriate ID is not registered. - Allow ACPI to bind device via PRP0001 * dmaengine buffer - Use dma_request_chan instead of dma_request_slave_channel_reason as that ABI is going away. - Add module info to avoid tainting the kernel. * hts221 - Avoid magic number defines when only used to fill structure elements that are self describing. * lm3533 - Drop a stray semicolon. * max9611 - Cleanup enum handling to be more resilient to future changes. * mpu6050 - Delete MPU9150 from supported SPI devices as doesn't provide SPI. - Select I2C_MUX again after kbuild issue fixed elsewhere. * stm32-timer - Drop an unnecessary register update. * ssp_sensors - Convert to GPIO descriptors. * st_sensors - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used anyway. - Make default platform data structures __maybe_unsued. - Fill in some missing kernel-doc function parameters. * st_lsm6dsx - white space fixes. - Mark some constants that aren't always used as __maybe_unused. - Drop of ID table guards as they just pervent use under ACPI. - Switch to device properties to allow ACPI usage. * st_uvis25 - Drop acpi.h include as no ACPI APIs used. * ti-ads1015 - Drop legacy platform data as no one seems to be using it. - Use the device property API instead of OF specific. * ti-ads7950 - typo fix in error message. * tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits) iio: accel: bma180: BMA254 support iio: pressure: bmp280: Allow device to be enumerated from ACPI iio: pressure: bmp280: Drop ACPI support dt-bindings: iio: adc: convert sd modulator to json-schema iio: buffer: rename 'read_first_n' callback to 'read' iio: buffer-dmaengine: Report buffer length requirements bindings: iio: pressure: Add documentation for dlh driver dt-bindings: Add asc vendor iio: pressure: Add driver for DLH pressure sensors iio: buffer-dmaengine: Add module information iio: accel: bma180: Use explicit member assignment iio: accel: bma180: Basic regulator support iio: accel: bma180: Add dev helper variable iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page iio: imu: st_lsm6dsx: check if pull_up is located in primary page iio: imu: st_lsm6dsx: check if master_enable is located in primary page iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings iio: light: remove unneeded semicolon ... |
||
---|---|---|
.. | ||
hid-sensor-temperature.c | ||
Kconfig | ||
ltc2983.c | ||
Makefile | ||
max31856.c | ||
maxim_thermocouple.c | ||
mlx90614.c | ||
mlx90632.c | ||
tmp006.c | ||
tmp007.c | ||
tsys01.c | ||
tsys02d.c |