linux/drivers/pci/hotplug/pciehp_pci.c
Bjorn Helgaas d569c74d78 PCI hotplug: pciehp: use generic pci_configure_slot()
Use the generic pci_configure_slot() rather than the PCIe-specific
program_fw_provided_values().

Unlike the previous pciehp-specific code, we now walk through subordinate
devices even if there are no settings for the parent.  This should be
harmless because we won't change anything unless we discover firmware
settings farther down.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-14 17:39:09 -07:00

161 lines
4.4 KiB
C

/*
* PCI Express Hot Plug Controller Driver
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include "../pci.h"
#include "pciehp.h"
static int __ref pciehp_add_bridge(struct pci_dev *dev)
{
struct pci_bus *parent = dev->bus;
int pass, busnr, start = parent->secondary;
int end = parent->subordinate;
for (busnr = start; busnr <= end; busnr++) {
if (!pci_find_bus(pci_domain_nr(parent), busnr))
break;
}
if (busnr-- > end) {
err("No bus number available for hot-added bridge %s\n",
pci_name(dev));
return -1;
}
for (pass = 0; pass < 2; pass++)
busnr = pci_scan_bridge(parent, dev, busnr, pass);
if (!dev->subordinate)
return -1;
pci_bus_size_bridges(dev->subordinate);
pci_bus_assign_resources(parent);
pci_enable_bridges(parent);
pci_bus_add_devices(parent);
return 0;
}
int pciehp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
int num, fn;
struct controller *ctrl = p_slot->ctrl;
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (dev) {
ctrl_err(ctrl, "Device %s already exists "
"at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
pci_domain_nr(parent), p_slot->bus, p_slot->device);
pci_dev_put(dev);
return -EINVAL;
}
num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
if (num == 0) {
ctrl_err(ctrl, "No new device found\n");
return -ENODEV;
}
for (fn = 0; fn < 8; fn++) {
dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
if (!dev)
continue;
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
ctrl_err(ctrl, "Cannot hot-add display device %s\n",
pci_name(dev));
pci_dev_put(dev);
continue;
}
if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
pciehp_add_bridge(dev);
}
pci_configure_slot(dev);
pci_dev_put(dev);
}
pci_bus_assign_resources(parent);
pci_bus_add_devices(parent);
return 0;
}
int pciehp_unconfigure_device(struct slot *p_slot)
{
int ret, rc = 0;
int j;
u8 bctl = 0;
u8 presence = 0;
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
u16 command;
struct controller *ctrl = p_slot->ctrl;
ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
__func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
if (ret)
presence = 0;
for (j = 0; j < 8; j++) {
struct pci_dev* temp = pci_get_slot(parent,
(p_slot->device << 3) | j);
if (!temp)
continue;
if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
ctrl_err(ctrl, "Cannot remove display device %s\n",
pci_name(temp));
pci_dev_put(temp);
continue;
}
if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
if (bctl & PCI_BRIDGE_CTL_VGA) {
ctrl_err(ctrl,
"Cannot remove display device %s\n",
pci_name(temp));
pci_dev_put(temp);
continue;
}
}
pci_remove_bus_device(temp);
/*
* Ensure that no new Requests will be generated from
* the device.
*/
if (presence) {
pci_read_config_word(temp, PCI_COMMAND, &command);
command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
command |= PCI_COMMAND_INTX_DISABLE;
pci_write_config_word(temp, PCI_COMMAND, command);
}
pci_dev_put(temp);
}
return rc;
}