mirror of
https://github.com/torvalds/linux.git
synced 2024-11-01 01:31:44 +00:00
81b9d5351f
Update the r8a7790 arch timer setup code to configure the frequency dynamically at boot time. This means that the arch timer driver will be able to detect a timer frequency that has been calculated based on the MD pins instead of a fixed and potentially incorrect 13 MHz. With this patch applied the Linux kernel will correctly support the r8a7790 Lager board that uses a 20 Mhz EXTAL. The arch timer will operate on 10 MHz and the Linux arch timer driver will be correctly configured to use 10 MHz. Without this patch the 20 MHz EXTAL will be used to drive the arch timer at 10 MHz, but the Linux arch timer driver will believe it is counting at 13 Mhz. Reported-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
284 lines
7.9 KiB
C
284 lines
7.9 KiB
C
/*
|
|
* r8a7790 processor support
|
|
*
|
|
* Copyright (C) 2013 Renesas Solutions Corp.
|
|
* Copyright (C) 2013 Magnus Damm
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_data/gpio-rcar.h>
|
|
#include <linux/platform_data/irq-renesas-irqc.h>
|
|
#include <linux/serial_sci.h>
|
|
#include <linux/sh_timer.h>
|
|
#include <mach/common.h>
|
|
#include <mach/irqs.h>
|
|
#include <mach/r8a7790.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
static struct resource pfc_resources[] __initdata = {
|
|
DEFINE_RES_MEM(0xe6060000, 0x250),
|
|
};
|
|
|
|
#define R8A7790_GPIO(idx) \
|
|
static struct resource r8a7790_gpio##idx##_resources[] __initdata = { \
|
|
DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \
|
|
DEFINE_RES_IRQ(gic_spi(4 + (idx))), \
|
|
}; \
|
|
\
|
|
static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = { \
|
|
.gpio_base = 32 * (idx), \
|
|
.irq_base = 0, \
|
|
.number_of_pins = 32, \
|
|
.pctl_name = "pfc-r8a7790", \
|
|
.has_both_edge_trigger = 1, \
|
|
}; \
|
|
|
|
R8A7790_GPIO(0);
|
|
R8A7790_GPIO(1);
|
|
R8A7790_GPIO(2);
|
|
R8A7790_GPIO(3);
|
|
R8A7790_GPIO(4);
|
|
R8A7790_GPIO(5);
|
|
|
|
#define r8a7790_register_gpio(idx) \
|
|
platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \
|
|
r8a7790_gpio##idx##_resources, \
|
|
ARRAY_SIZE(r8a7790_gpio##idx##_resources), \
|
|
&r8a7790_gpio##idx##_platform_data, \
|
|
sizeof(r8a7790_gpio##idx##_platform_data))
|
|
|
|
void __init r8a7790_pinmux_init(void)
|
|
{
|
|
platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
|
|
ARRAY_SIZE(pfc_resources));
|
|
r8a7790_register_gpio(0);
|
|
r8a7790_register_gpio(1);
|
|
r8a7790_register_gpio(2);
|
|
r8a7790_register_gpio(3);
|
|
r8a7790_register_gpio(4);
|
|
r8a7790_register_gpio(5);
|
|
}
|
|
|
|
#define SCIF_COMMON(scif_type, baseaddr, irq) \
|
|
.type = scif_type, \
|
|
.mapbase = baseaddr, \
|
|
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
|
|
.irqs = SCIx_IRQ_MUXED(irq)
|
|
|
|
#define SCIFA_DATA(index, baseaddr, irq) \
|
|
[index] = { \
|
|
SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
|
|
.scbrr_algo_id = SCBRR_ALGO_4, \
|
|
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
|
|
}
|
|
|
|
#define SCIFB_DATA(index, baseaddr, irq) \
|
|
[index] = { \
|
|
SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
|
|
.scbrr_algo_id = SCBRR_ALGO_4, \
|
|
.scscr = SCSCR_RE | SCSCR_TE, \
|
|
}
|
|
|
|
#define SCIF_DATA(index, baseaddr, irq) \
|
|
[index] = { \
|
|
SCIF_COMMON(PORT_SCIF, baseaddr, irq), \
|
|
.scbrr_algo_id = SCBRR_ALGO_2, \
|
|
.scscr = SCSCR_RE | SCSCR_TE, \
|
|
}
|
|
|
|
#define HSCIF_DATA(index, baseaddr, irq) \
|
|
[index] = { \
|
|
SCIF_COMMON(PORT_HSCIF, baseaddr, irq), \
|
|
.scbrr_algo_id = SCBRR_ALGO_6, \
|
|
.scscr = SCSCR_RE | SCSCR_TE, \
|
|
}
|
|
|
|
enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
|
|
HSCIF0, HSCIF1 };
|
|
|
|
static struct plat_sci_port scif[] __initdata = {
|
|
SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
|
|
SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
|
|
SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
|
|
SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
|
|
SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
|
|
SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
|
|
SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
|
|
SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
|
|
HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
|
|
HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
|
|
};
|
|
|
|
static inline void r8a7790_register_scif(int idx)
|
|
{
|
|
platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
|
|
sizeof(struct plat_sci_port));
|
|
}
|
|
|
|
static struct renesas_irqc_config irqc0_data __initdata = {
|
|
.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
|
|
};
|
|
|
|
static struct resource irqc0_resources[] __initdata = {
|
|
DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
|
|
DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
|
|
DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
|
|
DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
|
|
DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
|
|
};
|
|
|
|
#define r8a7790_register_irqc(idx) \
|
|
platform_device_register_resndata(&platform_bus, "renesas_irqc", \
|
|
idx, irqc##idx##_resources, \
|
|
ARRAY_SIZE(irqc##idx##_resources), \
|
|
&irqc##idx##_data, \
|
|
sizeof(struct renesas_irqc_config))
|
|
|
|
static struct resource thermal_resources[] __initdata = {
|
|
DEFINE_RES_MEM(0xe61f0000, 0x14),
|
|
DEFINE_RES_MEM(0xe61f0100, 0x38),
|
|
DEFINE_RES_IRQ(gic_spi(69)),
|
|
};
|
|
|
|
#define r8a7790_register_thermal() \
|
|
platform_device_register_simple("rcar_thermal", -1, \
|
|
thermal_resources, \
|
|
ARRAY_SIZE(thermal_resources))
|
|
|
|
static struct sh_timer_config cmt00_platform_data = {
|
|
.name = "CMT00",
|
|
.timer_bit = 0,
|
|
.clockevent_rating = 80,
|
|
};
|
|
|
|
static struct resource cmt00_resources[] = {
|
|
DEFINE_RES_MEM(0xffca0510, 0x0c),
|
|
DEFINE_RES_MEM(0xffca0500, 0x04),
|
|
DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
|
|
};
|
|
|
|
#define r8a7790_register_cmt(idx) \
|
|
platform_device_register_resndata(&platform_bus, "sh_cmt", \
|
|
idx, cmt##idx##_resources, \
|
|
ARRAY_SIZE(cmt##idx##_resources), \
|
|
&cmt##idx##_platform_data, \
|
|
sizeof(struct sh_timer_config))
|
|
|
|
void __init r8a7790_add_standard_devices(void)
|
|
{
|
|
r8a7790_register_scif(SCIFA0);
|
|
r8a7790_register_scif(SCIFA1);
|
|
r8a7790_register_scif(SCIFB0);
|
|
r8a7790_register_scif(SCIFB1);
|
|
r8a7790_register_scif(SCIFB2);
|
|
r8a7790_register_scif(SCIFA2);
|
|
r8a7790_register_scif(SCIF0);
|
|
r8a7790_register_scif(SCIF1);
|
|
r8a7790_register_scif(HSCIF0);
|
|
r8a7790_register_scif(HSCIF1);
|
|
r8a7790_register_irqc(0);
|
|
r8a7790_register_thermal();
|
|
r8a7790_register_cmt(00);
|
|
}
|
|
|
|
#define MODEMR 0xe6160060
|
|
|
|
u32 __init r8a7790_read_mode_pins(void)
|
|
{
|
|
void __iomem *modemr = ioremap_nocache(MODEMR, 4);
|
|
u32 mode;
|
|
|
|
BUG_ON(!modemr);
|
|
mode = ioread32(modemr);
|
|
iounmap(modemr);
|
|
|
|
return mode;
|
|
}
|
|
|
|
#define CNTCR 0
|
|
#define CNTFID0 0x20
|
|
|
|
void __init r8a7790_timer_init(void)
|
|
{
|
|
#ifdef CONFIG_ARM_ARCH_TIMER
|
|
u32 mode = r8a7790_read_mode_pins();
|
|
void __iomem *base;
|
|
int extal_mhz = 0;
|
|
u32 freq;
|
|
|
|
/* At Linux boot time the r8a7790 arch timer comes up
|
|
* with the counter disabled. Moreover, it may also report
|
|
* a potentially incorrect fixed 13 MHz frequency. To be
|
|
* correct these registers need to be updated to use the
|
|
* frequency EXTAL / 2 which can be determined by the MD pins.
|
|
*/
|
|
|
|
switch (mode & (MD(14) | MD(13))) {
|
|
case 0:
|
|
extal_mhz = 15;
|
|
break;
|
|
case MD(13):
|
|
extal_mhz = 20;
|
|
break;
|
|
case MD(14):
|
|
extal_mhz = 26;
|
|
break;
|
|
case MD(13) | MD(14):
|
|
extal_mhz = 30;
|
|
break;
|
|
}
|
|
|
|
/* The arch timer frequency equals EXTAL / 2 */
|
|
freq = extal_mhz * (1000000 / 2);
|
|
|
|
/* Remap "armgcnt address map" space */
|
|
base = ioremap(0xe6080000, PAGE_SIZE);
|
|
|
|
/* Update registers with correct frequency */
|
|
iowrite32(freq, base + CNTFID0);
|
|
asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
|
|
|
|
/* make sure arch timer is started by setting bit 0 of CNTCR */
|
|
iowrite32(1, base + CNTCR);
|
|
iounmap(base);
|
|
#endif /* CONFIG_ARM_ARCH_TIMER */
|
|
|
|
shmobile_timer_init();
|
|
}
|
|
|
|
void __init r8a7790_init_delay(void)
|
|
{
|
|
#ifndef CONFIG_ARM_ARCH_TIMER
|
|
shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_USE_OF
|
|
|
|
static const char *r8a7790_boards_compat_dt[] __initdata = {
|
|
"renesas,r8a7790",
|
|
NULL,
|
|
};
|
|
|
|
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
|
|
.init_early = r8a7790_init_delay,
|
|
.init_time = r8a7790_timer_init,
|
|
.dt_compat = r8a7790_boards_compat_dt,
|
|
MACHINE_END
|
|
#endif /* CONFIG_USE_OF */
|