linux/arch/arm/mm/proc-mohawk.S
Kirill A. Shutemov 4fb2847437 ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()
Instruction fault status register, IFSR, was introduced on ARMv6 to
provide status information about the last insturction fault. It
needed for proper prefetch abort handling.

Now we have three prefetch abort model:

  * legacy - for CPUs before ARMv6. They doesn't provide neither
    IFSR nor IFAR. We simulate IFSR with section translation fault
    status for them to generalize code;
  * ARMv6 - provides IFSR, but not IFAR;
  * ARMv7 - provides both IFSR and IFAR.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-02 22:34:32 +01:00

417 lines
10 KiB
ArmAsm

/*
* linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
*
* PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
*
* Heavily based on proc-arm926.S and proc-xsc3.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
/*
* This is the maximum size of an area which will be flushed. If the
* area is larger than this, then we flush the whole cache.
*/
#define CACHE_DLIMIT 32768
/*
* The cache line size of the L1 D cache.
*/
#define CACHE_DLINESIZE 32
/*
* cpu_mohawk_proc_init()
*/
ENTRY(cpu_mohawk_proc_init)
mov pc, lr
/*
* cpu_mohawk_proc_fin()
*/
ENTRY(cpu_mohawk_proc_fin)
stmfd sp!, {lr}
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
bl mohawk_flush_kern_cache_all
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1800 @ ...iz...........
bic r0, r0, #0x0006 @ .............ca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ldmfd sp!, {pc}
/*
* cpu_mohawk_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
*
* (same as arm926)
*/
.align 5
ENTRY(cpu_mohawk_reset)
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x0007 @ .............cam
bic ip, ip, #0x1100 @ ...i...s........
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
mov pc, r0
/*
* cpu_mohawk_do_idle()
*
* Called with IRQs disabled
*/
.align 5
ENTRY(cpu_mohawk_do_idle)
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
mov pc, lr
/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular
* address space.
*/
ENTRY(mohawk_flush_user_cache_all)
/* FALLTHROUGH */
/*
* flush_kern_cache_all()
*
* Clean and invalidate the entire cache.
*/
ENTRY(mohawk_flush_kern_cache_all)
mov r2, #VM_EXEC
mov ip, #0
__flush_whole_cache:
mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcrne p15, 0, ip, c7, c10, 0 @ drain write buffer
mov pc, lr
/*
* flush_user_cache_range(start, end, flags)
*
* Clean and invalidate a range of cache entries in the
* specified address range.
*
* - start - start address (inclusive)
* - end - end address (exclusive)
* - flags - vm_flags describing address space
*
* (same as arm926)
*/
ENTRY(mohawk_flush_user_cache_range)
mov ip, #0
sub r3, r1, r0 @ calculate total size
cmp r3, #CACHE_DLIMIT
bgt __flush_whole_cache
1: tst r2, #VM_EXEC
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* coherent_kern_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(mohawk_coherent_kern_range)
/* FALLTHROUGH */
/*
* coherent_user_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start, end. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*
* (same as arm926)
*/
ENTRY(mohawk_coherent_user_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* flush_kern_dcache_page(void *page)
*
* Ensure no D cache aliasing occurs, either with itself or
* the I cache
*
* - addr - page aligned address
*/
ENTRY(mohawk_flush_kern_dcache_page)
add r1, r0, #PAGE_SZ
1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_inv_range(start, end)
*
* Invalidate (discard) the specified virtual address range.
* May not write back any entries. If 'start' or 'end'
* are not cache line aligned, those lines must be written
* back.
*
* - start - virtual start address
* - end - virtual end address
*
* (same as v4wb)
*/
ENTRY(mohawk_dma_inv_range)
tst r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
tst r1, #CACHE_DLINESIZE - 1
mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_clean_range(start, end)
*
* Clean the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*
* (same as v4wb)
*/
ENTRY(mohawk_dma_clean_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(mohawk_dma_flush_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1:
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
ENTRY(mohawk_cache_fns)
.long mohawk_flush_kern_cache_all
.long mohawk_flush_user_cache_all
.long mohawk_flush_user_cache_range
.long mohawk_coherent_kern_range
.long mohawk_coherent_user_range
.long mohawk_flush_kern_dcache_page
.long mohawk_dma_inv_range
.long mohawk_dma_clean_range
.long mohawk_dma_flush_range
ENTRY(cpu_mohawk_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
/*
* cpu_mohawk_switch_mm(pgd)
*
* Set the translation base pointer to be as described by pgd.
*
* pgd: new page tables
*/
.align 5
ENTRY(cpu_mohawk_switch_mm)
mov ip, #0
mcr p15, 0, ip, c7, c14, 0 @ clean & invalidate all D cache
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c10, 4 @ drain WB
orr r0, r0, #0x18 @ cache the page table in L2
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mov pc, lr
/*
* cpu_mohawk_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 5
ENTRY(cpu_mohawk_set_pte_ext)
armv3_set_pte_ext
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c10, 4 @ drain WB
mov pc, lr
__INIT
.type __mohawk_setup, #function
__mohawk_setup:
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs
orr r4, r4, #0x18 @ cache the page table in L2
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
mov r0, #0 @ don't allow CP access
mcr p15, 0, r0, c15, c1, 0 @ write CP access register
adr r5, mohawk_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0 @ get control register
bic r0, r0, r5
orr r0, r0, r6
mov pc, lr
.size __mohawk_setup, . - __mohawk_setup
/*
* R
* .RVI ZFRS BLDP WCAM
* .011 1001 ..00 0101
*
*/
.type mohawk_crval, #object
mohawk_crval:
crval clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
__INITDATA
/*
* Purpose : Function pointers used to access above functions - all calls
* come through these
*/
.type mohawk_processor_functions, #object
mohawk_processor_functions:
.word v5t_early_abort
.word legacy_pabort
.word cpu_mohawk_proc_init
.word cpu_mohawk_proc_fin
.word cpu_mohawk_reset
.word cpu_mohawk_do_idle
.word cpu_mohawk_dcache_clean_area
.word cpu_mohawk_switch_mm
.word cpu_mohawk_set_pte_ext
.size mohawk_processor_functions, . - mohawk_processor_functions
.section ".rodata"
.type cpu_arch_name, #object
cpu_arch_name:
.asciz "armv5te"
.size cpu_arch_name, . - cpu_arch_name
.type cpu_elf_name, #object
cpu_elf_name:
.asciz "v5"
.size cpu_elf_name, . - cpu_elf_name
.type cpu_mohawk_name, #object
cpu_mohawk_name:
.asciz "Marvell 88SV331x"
.size cpu_mohawk_name, . - cpu_mohawk_name
.align
.section ".proc.info.init", #alloc, #execinstr
.type __88sv331x_proc_info,#object
__88sv331x_proc_info:
.long 0x56158000 @ Marvell 88SV331x (MOHAWK)
.long 0xfffff000
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __mohawk_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_mohawk_name
.long mohawk_processor_functions
.long v4wbi_tlb_fns
.long v4wb_user_fns
.long mohawk_cache_fns
.size __88sv331x_proc_info, . - __88sv331x_proc_info