mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 20:01:55 +00:00
bbfc6cb720
QCOM USB3.0 core wrapper consist of USB3.0 IP from Synopsys (SNPS) and HS, SS PHY's control and configuration registers. It could operate in device mode (SS, HS, FS) and host mode (SS, HS, FS, LS). Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
40 lines
1.1 KiB
Plaintext
40 lines
1.1 KiB
Plaintext
Qualcomm DWC3 HS AND SS PHY CONTROLLER
|
|
--------------------------------------
|
|
|
|
DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
|
|
controllers. Each DWC3 PHY controller should have its own node.
|
|
|
|
Required properties:
|
|
- compatible: should contain one of the following:
|
|
- "qcom,dwc3-hs-usb-phy" for High Speed Synopsis PHY controller
|
|
- "qcom,dwc3-ss-usb-phy" for Super Speed Synopsis PHY controller
|
|
- reg: offset and length of the DWC3 PHY controller register set
|
|
- #phy-cells: must be zero
|
|
- clocks: a list of phandles and clock-specifier pairs, one for each entry in
|
|
clock-names.
|
|
- clock-names: Should contain "ref" for the PHY reference clock
|
|
|
|
Optional clocks:
|
|
"xo" External reference clock
|
|
|
|
Example:
|
|
phy@100f8800 {
|
|
compatible = "qcom,dwc3-hs-usb-phy";
|
|
reg = <0x100f8800 0x30>;
|
|
clocks = <&gcc USB30_0_UTMI_CLK>;
|
|
clock-names = "ref";
|
|
#phy-cells = <0>;
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
phy@100f8830 {
|
|
compatible = "qcom,dwc3-ss-usb-phy";
|
|
reg = <0x100f8830 0x30>;
|
|
clocks = <&gcc USB30_0_MASTER_CLK>;
|
|
clock-names = "ref";
|
|
#phy-cells = <0>;
|
|
|
|
status = "ok";
|
|
};
|