linux/drivers/usb/core/config.c
Sarah Sharp 6b403b020c USB: Add SuperSpeed to the list of USB device speeds.
Modify the USB core to handle the new USB 3.0 speed, "SuperSpeed".  This
is 5.0 Gbps (wire speed).  There are probably more places that check for
speed that I've missed.

SuperSpeed devices have a 512 byte endpoint 0 max packet size.  This shows
up as a bMaxPacketSize0 set to 0x09 (see table 9-8 of the USB 3.0 bus
spec).

xHCI spec says that the xHC can handle intervals up to 2^15 microframes.  That
might change when real silicon becomes available.

Add FIXME note for SuperSpeed isochronous endpoints.  They can transmit up
to 16 packets in one "burst" before they wait for an acknowledgment of the
packets.  They can do up to 3 bursts per microframe (determined by the
mult value in the endpoint companion descriptor).  The xHCI driver doesn't
have support for isoc yet, so fix this later.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:44:48 -07:00

642 lines
18 KiB
C

#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <asm/byteorder.h>
#include "usb.h"
#include "hcd.h"
#define USB_MAXALTSETTING 128 /* Hard limit */
#define USB_MAXENDPOINTS 30 /* Hard limit */
#define USB_MAXCONFIG 8 /* Arbitrary limit */
static inline const char *plural(int n)
{
return (n == 1 ? "" : "s");
}
static int find_next_descriptor(unsigned char *buffer, int size,
int dt1, int dt2, int *num_skipped)
{
struct usb_descriptor_header *h;
int n = 0;
unsigned char *buffer0 = buffer;
/* Find the next descriptor of type dt1 or dt2 */
while (size > 0) {
h = (struct usb_descriptor_header *) buffer;
if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2)
break;
buffer += h->bLength;
size -= h->bLength;
++n;
}
/* Store the number of descriptors skipped and return the
* number of bytes skipped */
if (num_skipped)
*num_skipped = n;
return buffer - buffer0;
}
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
int asnum, struct usb_host_interface *ifp, int num_ep,
unsigned char *buffer, int size)
{
unsigned char *buffer0 = buffer;
struct usb_endpoint_descriptor *d;
struct usb_host_endpoint *endpoint;
int n, i, j;
d = (struct usb_endpoint_descriptor *) buffer;
buffer += d->bLength;
size -= d->bLength;
if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
n = USB_DT_ENDPOINT_AUDIO_SIZE;
else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
n = USB_DT_ENDPOINT_SIZE;
else {
dev_warn(ddev, "config %d interface %d altsetting %d has an "
"invalid endpoint descriptor of length %d, skipping\n",
cfgno, inum, asnum, d->bLength);
goto skip_to_next_endpoint_or_interface_descriptor;
}
i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
if (i >= 16 || i == 0) {
dev_warn(ddev, "config %d interface %d altsetting %d has an "
"invalid endpoint with address 0x%X, skipping\n",
cfgno, inum, asnum, d->bEndpointAddress);
goto skip_to_next_endpoint_or_interface_descriptor;
}
/* Only store as many endpoints as we have room for */
if (ifp->desc.bNumEndpoints >= num_ep)
goto skip_to_next_endpoint_or_interface_descriptor;
endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
++ifp->desc.bNumEndpoints;
memcpy(&endpoint->desc, d, n);
INIT_LIST_HEAD(&endpoint->urb_list);
/* Fix up bInterval values outside the legal range. Use 32 ms if no
* proper value can be guessed. */
i = 0; /* i = min, j = max, n = default */
j = 255;
if (usb_endpoint_xfer_int(d)) {
i = 1;
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
/* Many device manufacturers are using full-speed
* bInterval values in high-speed interrupt endpoint
* descriptors. Try to fix those and fall back to a
* 32 ms default value otherwise. */
n = fls(d->bInterval*8);
if (n == 0)
n = 9; /* 32 ms = 2^(9-1) uframes */
j = 16;
break;
default: /* USB_SPEED_FULL or _LOW */
/* For low-speed, 10 ms is the official minimum.
* But some "overclocked" devices might want faster
* polling so we'll allow it. */
n = 32;
break;
}
} else if (usb_endpoint_xfer_isoc(d)) {
i = 1;
j = 16;
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_HIGH:
n = 9; /* 32 ms = 2^(9-1) uframes */
break;
default: /* USB_SPEED_FULL */
n = 6; /* 32 ms = 2^(6-1) frames */
break;
}
}
if (d->bInterval < i || d->bInterval > j) {
dev_warn(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X has an invalid bInterval %d, "
"changing to %d\n",
cfgno, inum, asnum,
d->bEndpointAddress, d->bInterval, n);
endpoint->desc.bInterval = n;
}
/* Some buggy low-speed devices have Bulk endpoints, which is
* explicitly forbidden by the USB spec. In an attempt to make
* them usable, we will try treating them as Interrupt endpoints.
*/
if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
usb_endpoint_xfer_bulk(d)) {
dev_warn(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X is Bulk; changing to Interrupt\n",
cfgno, inum, asnum, d->bEndpointAddress);
endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
endpoint->desc.bInterval = 1;
if (le16_to_cpu(endpoint->desc.wMaxPacketSize) > 8)
endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
}
/*
* Some buggy high speed devices have bulk endpoints using
* maxpacket sizes other than 512. High speed HCDs may not
* be able to handle that particular bug, so let's warn...
*/
if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
&& usb_endpoint_xfer_bulk(d)) {
unsigned maxp;
maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize) & 0x07ff;
if (maxp != 512)
dev_warn(ddev, "config %d interface %d altsetting %d "
"bulk endpoint 0x%X has invalid maxpacket %d\n",
cfgno, inum, asnum, d->bEndpointAddress,
maxp);
}
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the next endpoint or interface descriptor */
endpoint->extra = buffer;
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
USB_DT_INTERFACE, &n);
endpoint->extralen = i;
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
n, plural(n), "endpoint");
return buffer - buffer0 + i;
skip_to_next_endpoint_or_interface_descriptor:
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
USB_DT_INTERFACE, NULL);
return buffer - buffer0 + i;
}
void usb_release_interface_cache(struct kref *ref)
{
struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref);
int j;
for (j = 0; j < intfc->num_altsetting; j++) {
struct usb_host_interface *alt = &intfc->altsetting[j];
kfree(alt->endpoint);
kfree(alt->string);
}
kfree(intfc);
}
static int usb_parse_interface(struct device *ddev, int cfgno,
struct usb_host_config *config, unsigned char *buffer, int size,
u8 inums[], u8 nalts[])
{
unsigned char *buffer0 = buffer;
struct usb_interface_descriptor *d;
int inum, asnum;
struct usb_interface_cache *intfc;
struct usb_host_interface *alt;
int i, n;
int len, retval;
int num_ep, num_ep_orig;
d = (struct usb_interface_descriptor *) buffer;
buffer += d->bLength;
size -= d->bLength;
if (d->bLength < USB_DT_INTERFACE_SIZE)
goto skip_to_next_interface_descriptor;
/* Which interface entry is this? */
intfc = NULL;
inum = d->bInterfaceNumber;
for (i = 0; i < config->desc.bNumInterfaces; ++i) {
if (inums[i] == inum) {
intfc = config->intf_cache[i];
break;
}
}
if (!intfc || intfc->num_altsetting >= nalts[i])
goto skip_to_next_interface_descriptor;
/* Check for duplicate altsetting entries */
asnum = d->bAlternateSetting;
for ((i = 0, alt = &intfc->altsetting[0]);
i < intfc->num_altsetting;
(++i, ++alt)) {
if (alt->desc.bAlternateSetting == asnum) {
dev_warn(ddev, "Duplicate descriptor for config %d "
"interface %d altsetting %d, skipping\n",
cfgno, inum, asnum);
goto skip_to_next_interface_descriptor;
}
}
++intfc->num_altsetting;
memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE);
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the first endpoint or interface descriptor */
alt->extra = buffer;
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
USB_DT_INTERFACE, &n);
alt->extralen = i;
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
n, plural(n), "interface");
buffer += i;
size -= i;
/* Allocate space for the right(?) number of endpoints */
num_ep = num_ep_orig = alt->desc.bNumEndpoints;
alt->desc.bNumEndpoints = 0; /* Use as a counter */
if (num_ep > USB_MAXENDPOINTS) {
dev_warn(ddev, "too many endpoints for config %d interface %d "
"altsetting %d: %d, using maximum allowed: %d\n",
cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS);
num_ep = USB_MAXENDPOINTS;
}
if (num_ep > 0) {
/* Can't allocate 0 bytes */
len = sizeof(struct usb_host_endpoint) * num_ep;
alt->endpoint = kzalloc(len, GFP_KERNEL);
if (!alt->endpoint)
return -ENOMEM;
}
/* Parse all the endpoint descriptors */
n = 0;
while (size > 0) {
if (((struct usb_descriptor_header *) buffer)->bDescriptorType
== USB_DT_INTERFACE)
break;
retval = usb_parse_endpoint(ddev, cfgno, inum, asnum, alt,
num_ep, buffer, size);
if (retval < 0)
return retval;
++n;
buffer += retval;
size -= retval;
}
if (n != num_ep_orig)
dev_warn(ddev, "config %d interface %d altsetting %d has %d "
"endpoint descriptor%s, different from the interface "
"descriptor's value: %d\n",
cfgno, inum, asnum, n, plural(n), num_ep_orig);
return buffer - buffer0;
skip_to_next_interface_descriptor:
i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
USB_DT_INTERFACE, NULL);
return buffer - buffer0 + i;
}
static int usb_parse_configuration(struct device *ddev, int cfgidx,
struct usb_host_config *config, unsigned char *buffer, int size)
{
unsigned char *buffer0 = buffer;
int cfgno;
int nintf, nintf_orig;
int i, j, n;
struct usb_interface_cache *intfc;
unsigned char *buffer2;
int size2;
struct usb_descriptor_header *header;
int len, retval;
u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES];
unsigned iad_num = 0;
memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
if (config->desc.bDescriptorType != USB_DT_CONFIG ||
config->desc.bLength < USB_DT_CONFIG_SIZE) {
dev_err(ddev, "invalid descriptor for config index %d: "
"type = 0x%X, length = %d\n", cfgidx,
config->desc.bDescriptorType, config->desc.bLength);
return -EINVAL;
}
cfgno = config->desc.bConfigurationValue;
buffer += config->desc.bLength;
size -= config->desc.bLength;
nintf = nintf_orig = config->desc.bNumInterfaces;
if (nintf > USB_MAXINTERFACES) {
dev_warn(ddev, "config %d has too many interfaces: %d, "
"using maximum allowed: %d\n",
cfgno, nintf, USB_MAXINTERFACES);
nintf = USB_MAXINTERFACES;
}
/* Go through the descriptors, checking their length and counting the
* number of altsettings for each interface */
n = 0;
for ((buffer2 = buffer, size2 = size);
size2 > 0;
(buffer2 += header->bLength, size2 -= header->bLength)) {
if (size2 < sizeof(struct usb_descriptor_header)) {
dev_warn(ddev, "config %d descriptor has %d excess "
"byte%s, ignoring\n",
cfgno, size2, plural(size2));
break;
}
header = (struct usb_descriptor_header *) buffer2;
if ((header->bLength > size2) || (header->bLength < 2)) {
dev_warn(ddev, "config %d has an invalid descriptor "
"of length %d, skipping remainder of the config\n",
cfgno, header->bLength);
break;
}
if (header->bDescriptorType == USB_DT_INTERFACE) {
struct usb_interface_descriptor *d;
int inum;
d = (struct usb_interface_descriptor *) header;
if (d->bLength < USB_DT_INTERFACE_SIZE) {
dev_warn(ddev, "config %d has an invalid "
"interface descriptor of length %d, "
"skipping\n", cfgno, d->bLength);
continue;
}
inum = d->bInterfaceNumber;
if (inum >= nintf_orig)
dev_warn(ddev, "config %d has an invalid "
"interface number: %d but max is %d\n",
cfgno, inum, nintf_orig - 1);
/* Have we already encountered this interface?
* Count its altsettings */
for (i = 0; i < n; ++i) {
if (inums[i] == inum)
break;
}
if (i < n) {
if (nalts[i] < 255)
++nalts[i];
} else if (n < USB_MAXINTERFACES) {
inums[n] = inum;
nalts[n] = 1;
++n;
}
} else if (header->bDescriptorType ==
USB_DT_INTERFACE_ASSOCIATION) {
if (iad_num == USB_MAXIADS) {
dev_warn(ddev, "found more Interface "
"Association Descriptors "
"than allocated for in "
"configuration %d\n", cfgno);
} else {
config->intf_assoc[iad_num] =
(struct usb_interface_assoc_descriptor
*)header;
iad_num++;
}
} else if (header->bDescriptorType == USB_DT_DEVICE ||
header->bDescriptorType == USB_DT_CONFIG)
dev_warn(ddev, "config %d contains an unexpected "
"descriptor of type 0x%X, skipping\n",
cfgno, header->bDescriptorType);
} /* for ((buffer2 = buffer, size2 = size); ...) */
size = buffer2 - buffer;
config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0);
if (n != nintf)
dev_warn(ddev, "config %d has %d interface%s, different from "
"the descriptor's value: %d\n",
cfgno, n, plural(n), nintf_orig);
else if (n == 0)
dev_warn(ddev, "config %d has no interfaces?\n", cfgno);
config->desc.bNumInterfaces = nintf = n;
/* Check for missing interface numbers */
for (i = 0; i < nintf; ++i) {
for (j = 0; j < nintf; ++j) {
if (inums[j] == i)
break;
}
if (j >= nintf)
dev_warn(ddev, "config %d has no interface number "
"%d\n", cfgno, i);
}
/* Allocate the usb_interface_caches and altsetting arrays */
for (i = 0; i < nintf; ++i) {
j = nalts[i];
if (j > USB_MAXALTSETTING) {
dev_warn(ddev, "too many alternate settings for "
"config %d interface %d: %d, "
"using maximum allowed: %d\n",
cfgno, inums[i], j, USB_MAXALTSETTING);
nalts[i] = j = USB_MAXALTSETTING;
}
len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
if (!intfc)
return -ENOMEM;
kref_init(&intfc->ref);
}
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the first interface descriptor */
config->extra = buffer;
i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
USB_DT_INTERFACE, &n);
config->extralen = i;
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
n, plural(n), "configuration");
buffer += i;
size -= i;
/* Parse all the interface/altsetting descriptors */
while (size > 0) {
retval = usb_parse_interface(ddev, cfgno, config,
buffer, size, inums, nalts);
if (retval < 0)
return retval;
buffer += retval;
size -= retval;
}
/* Check for missing altsettings */
for (i = 0; i < nintf; ++i) {
intfc = config->intf_cache[i];
for (j = 0; j < intfc->num_altsetting; ++j) {
for (n = 0; n < intfc->num_altsetting; ++n) {
if (intfc->altsetting[n].desc.
bAlternateSetting == j)
break;
}
if (n >= intfc->num_altsetting)
dev_warn(ddev, "config %d interface %d has no "
"altsetting %d\n", cfgno, inums[i], j);
}
}
return 0;
}
/* hub-only!! ... and only exported for reset/reinit path.
* otherwise used internally on disconnect/destroy path
*/
void usb_destroy_configuration(struct usb_device *dev)
{
int c, i;
if (!dev->config)
return;
if (dev->rawdescriptors) {
for (i = 0; i < dev->descriptor.bNumConfigurations; i++)
kfree(dev->rawdescriptors[i]);
kfree(dev->rawdescriptors);
dev->rawdescriptors = NULL;
}
for (c = 0; c < dev->descriptor.bNumConfigurations; c++) {
struct usb_host_config *cf = &dev->config[c];
kfree(cf->string);
for (i = 0; i < cf->desc.bNumInterfaces; i++) {
if (cf->intf_cache[i])
kref_put(&cf->intf_cache[i]->ref,
usb_release_interface_cache);
}
}
kfree(dev->config);
dev->config = NULL;
}
/*
* Get the USB config descriptors, cache and parse'em
*
* hub-only!! ... and only in reset path, or usb_new_device()
* (used by real hubs and virtual root hubs)
*
* NOTE: if this is a WUSB device and is not authorized, we skip the
* whole thing. A non-authorized USB device has no
* configurations.
*/
int usb_get_configuration(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
int ncfg = dev->descriptor.bNumConfigurations;
int result = 0;
unsigned int cfgno, length;
unsigned char *buffer;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
cfgno = 0;
if (dev->authorized == 0) /* Not really an error */
goto out_not_authorized;
result = -ENOMEM;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
"using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG;
}
if (ncfg < 1) {
dev_err(ddev, "no configurations\n");
return -EINVAL;
}
length = ncfg * sizeof(struct usb_host_config);
dev->config = kzalloc(length, GFP_KERNEL);
if (!dev->config)
goto err2;
length = ncfg * sizeof(char *);
dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
if (!dev->rawdescriptors)
goto err2;
buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
if (!buffer)
goto err2;
desc = (struct usb_config_descriptor *)buffer;
result = 0;
for (; cfgno < ncfg; cfgno++) {
/* We grab just the first descriptor so we know how long
* the whole configuration is */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
buffer, USB_DT_CONFIG_SIZE);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
"descriptor/%s: %d\n", cfgno, "start", result);
dev_err(ddev, "chopping to %d config(s)\n", cfgno);
dev->descriptor.bNumConfigurations = cfgno;
break;
} else if (result < 4) {
dev_err(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno,
USB_DT_CONFIG_SIZE, result);
result = -EINVAL;
goto err;
}
length = max((int) le16_to_cpu(desc->wTotalLength),
USB_DT_CONFIG_SIZE);
/* Now that we know the length, get the whole thing */
bigbuffer = kmalloc(length, GFP_KERNEL);
if (!bigbuffer) {
result = -ENOMEM;
goto err;
}
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
bigbuffer, length);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
"descriptor/%s\n", cfgno, "all");
kfree(bigbuffer);
goto err;
}
if (result < length) {
dev_warn(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno, length, result);
length = result;
}
dev->rawdescriptors[cfgno] = bigbuffer;
result = usb_parse_configuration(&dev->dev, cfgno,
&dev->config[cfgno], bigbuffer, length);
if (result < 0) {
++cfgno;
goto err;
}
}
result = 0;
err:
kfree(buffer);
out_not_authorized:
dev->descriptor.bNumConfigurations = cfgno;
err2:
if (result == -ENOMEM)
dev_err(ddev, "out of memory\n");
return result;
}