linux/arch/x86/include/asm/mmu_context.h
Andy Lutomirski a66734297f perf/x86: Add /sys/devices/cpu/rdpmc=2 to allow rdpmc for all tasks
While perfmon2 is a sufficiently evil library (it pokes MSRs
directly) that breaking it is fair game, it's still useful, so we
might as well try to support it.  This allows users to write 2 to
/sys/devices/cpu/rdpmc to disable all rdpmc protection so that hack
like perfmon2 can continue to work.

At some point, if perf_event becomes fast enough to replace
perfmon2, then this can go.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Vince Weaver <vince@deater.net>
Cc: "hillf.zj" <hillf.zj@alibaba-inc.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/caac3c1c707dcca48ecbc35f4def21495856f479.1414190806.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-04 12:10:49 +01:00

176 lines
4.6 KiB
C

#ifndef _ASM_X86_MMU_CONTEXT_H
#define _ASM_X86_MMU_CONTEXT_H
#include <asm/desc.h>
#include <linux/atomic.h>
#include <linux/mm_types.h>
#include <trace/events/tlb.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/paravirt.h>
#include <asm/mpx.h>
#ifndef CONFIG_PARAVIRT
static inline void paravirt_activate_mm(struct mm_struct *prev,
struct mm_struct *next)
{
}
#endif /* !CONFIG_PARAVIRT */
#ifdef CONFIG_PERF_EVENTS
extern struct static_key rdpmc_always_available;
static inline void load_mm_cr4(struct mm_struct *mm)
{
if (static_key_true(&rdpmc_always_available) ||
atomic_read(&mm->context.perf_rdpmc_allowed))
cr4_set_bits(X86_CR4_PCE);
else
cr4_clear_bits(X86_CR4_PCE);
}
#else
static inline void load_mm_cr4(struct mm_struct *mm) {}
#endif
/*
* Used for LDT copy/destruction.
*/
int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
void destroy_context(struct mm_struct *mm);
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
#ifdef CONFIG_SMP
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
this_cpu_write(cpu_tlbstate.state, TLBSTATE_LAZY);
#endif
}
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
unsigned cpu = smp_processor_id();
if (likely(prev != next)) {
#ifdef CONFIG_SMP
this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
this_cpu_write(cpu_tlbstate.active_mm, next);
#endif
cpumask_set_cpu(cpu, mm_cpumask(next));
/* Re-load page tables */
load_cr3(next->pgd);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
/* Stop flush ipis for the previous mm */
cpumask_clear_cpu(cpu, mm_cpumask(prev));
/* Load per-mm CR4 state */
load_mm_cr4(next);
/*
* Load the LDT, if the LDT is different.
*
* It's possible that prev->context.ldt doesn't match
* the LDT register. This can happen if leave_mm(prev)
* was called and then modify_ldt changed
* prev->context.ldt but suppressed an IPI to this CPU.
* In this case, prev->context.ldt != NULL, because we
* never free an LDT while the mm still exists. That
* means that next->context.ldt != prev->context.ldt,
* because mms never share an LDT.
*/
if (unlikely(prev->context.ldt != next->context.ldt))
load_LDT_nolock(&next->context);
}
#ifdef CONFIG_SMP
else {
this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
/*
* On established mms, the mm_cpumask is only changed
* from irq context, from ptep_clear_flush() while in
* lazy tlb mode, and here. Irqs are blocked during
* schedule, protecting us from simultaneous changes.
*/
cpumask_set_cpu(cpu, mm_cpumask(next));
/*
* We were in lazy tlb mode and leave_mm disabled
* tlb flush IPI delivery. We must reload CR3
* to make sure to use no freed page tables.
*/
load_cr3(next->pgd);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
load_mm_cr4(next);
load_LDT_nolock(&next->context);
}
}
#endif
}
#define activate_mm(prev, next) \
do { \
paravirt_activate_mm((prev), (next)); \
switch_mm((prev), (next), NULL); \
} while (0);
#ifdef CONFIG_X86_32
#define deactivate_mm(tsk, mm) \
do { \
lazy_load_gs(0); \
} while (0)
#else
#define deactivate_mm(tsk, mm) \
do { \
load_gs_index(0); \
loadsegment(fs, 0); \
} while (0)
#endif
static inline void arch_dup_mmap(struct mm_struct *oldmm,
struct mm_struct *mm)
{
paravirt_arch_dup_mmap(oldmm, mm);
}
static inline void arch_exit_mmap(struct mm_struct *mm)
{
paravirt_arch_exit_mmap(mm);
}
static inline void arch_bprm_mm_init(struct mm_struct *mm,
struct vm_area_struct *vma)
{
mpx_mm_init(mm);
}
static inline void arch_unmap(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
/*
* mpx_notify_unmap() goes and reads a rarely-hot
* cacheline in the mm_struct. That can be expensive
* enough to be seen in profiles.
*
* The mpx_notify_unmap() call and its contents have been
* observed to affect munmap() performance on hardware
* where MPX is not present.
*
* The unlikely() optimizes for the fast case: no MPX
* in the CPU, or no MPX use in the process. Even if
* we get this wrong (in the unlikely event that MPX
* is widely enabled on some system) the overhead of
* MPX itself (reading bounds tables) is expected to
* overwhelm the overhead of getting this unlikely()
* consistently wrong.
*/
if (unlikely(cpu_feature_enabled(X86_FEATURE_MPX)))
mpx_notify_unmap(mm, vma, start, end);
}
#endif /* _ASM_X86_MMU_CONTEXT_H */