mirror of
https://github.com/torvalds/linux.git
synced 2024-12-18 17:12:55 +00:00
d2b0f6f77e
The issue was detected in a bit complicated test case where we have multiple hierarchical PEs shown as following figure: +-----------------+ | PE#3 p2p#0 | | p2p#1 | +-----------------+ | +-----------------+ | PE#4 pdev#0 | | pdev#1 | +-----------------+ PE#4 (have 2 PCI devices) is the child of PE#3, which has 2 p2p bridges. We accidentally had less-known scenario: PE#4 was removed permanently from the system because of permanent failure (e.g. exceeding the max allowd failure times in last hour), then we detects EEH errors on PE#3 and tried to recover it. However, eeh_dev instances for pdev#0/1 were not detached from PE#4, which was still connected to PE#3. All of that was because of the fact that we rely on count-based pcibios_release_device(), which isn't reliable enough. When doing recovery for PE#3, we still apply hotplug on PE#4 and pdev#0/1, which are not valid any more. Eventually, we run into kernel crash. The patch fixes above issue from two aspects. For unplug, we simply skip those permanently removed PE, whose state is (EEH_PE_STATE_ISOLATED && !EEH_PE_STATE_RECOVERING) and its frozen count should be greater than EEH_MAX_ALLOWED_FREEZES. For plug, we marked all permanently removed EEH devices with EEH_DEV_REMOVED and return 0xFF's on read its PCI config so that PCI core will omit them. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
828 lines
22 KiB
C
828 lines
22 KiB
C
/*
|
|
* Support PCI/PCIe on PowerNV platforms
|
|
*
|
|
* Currently supports only P5IOC2
|
|
*
|
|
* Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/io.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/iommu.h>
|
|
|
|
#include <asm/sections.h>
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/msi_bitmap.h>
|
|
#include <asm/ppc-pci.h>
|
|
#include <asm/opal.h>
|
|
#include <asm/iommu.h>
|
|
#include <asm/tce.h>
|
|
#include <asm/firmware.h>
|
|
#include <asm/eeh_event.h>
|
|
#include <asm/eeh.h>
|
|
|
|
#include "powernv.h"
|
|
#include "pci.h"
|
|
|
|
/* Delay in usec */
|
|
#define PCI_RESET_DELAY_US 3000000
|
|
|
|
#define cfg_dbg(fmt...) do { } while(0)
|
|
//#define cfg_dbg(fmt...) printk(fmt)
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
struct pci_dn *pdn = pci_get_pdn(pdev);
|
|
|
|
if (pdn && pdn->force_32bit_msi && !phb->msi32_support)
|
|
return -ENODEV;
|
|
|
|
return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV;
|
|
}
|
|
|
|
static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
struct msi_desc *entry;
|
|
struct msi_msg msg;
|
|
int hwirq;
|
|
unsigned int virq;
|
|
int rc;
|
|
|
|
if (WARN_ON(!phb))
|
|
return -ENODEV;
|
|
|
|
list_for_each_entry(entry, &pdev->msi_list, list) {
|
|
if (!entry->msi_attrib.is_64 && !phb->msi32_support) {
|
|
pr_warn("%s: Supports only 64-bit MSIs\n",
|
|
pci_name(pdev));
|
|
return -ENXIO;
|
|
}
|
|
hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, 1);
|
|
if (hwirq < 0) {
|
|
pr_warn("%s: Failed to find a free MSI\n",
|
|
pci_name(pdev));
|
|
return -ENOSPC;
|
|
}
|
|
virq = irq_create_mapping(NULL, phb->msi_base + hwirq);
|
|
if (virq == NO_IRQ) {
|
|
pr_warn("%s: Failed to map MSI to linux irq\n",
|
|
pci_name(pdev));
|
|
msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, 1);
|
|
return -ENOMEM;
|
|
}
|
|
rc = phb->msi_setup(phb, pdev, phb->msi_base + hwirq,
|
|
virq, entry->msi_attrib.is_64, &msg);
|
|
if (rc) {
|
|
pr_warn("%s: Failed to setup MSI\n", pci_name(pdev));
|
|
irq_dispose_mapping(virq);
|
|
msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, 1);
|
|
return rc;
|
|
}
|
|
irq_set_msi_desc(virq, entry);
|
|
write_msi_msg(virq, &msg);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
struct msi_desc *entry;
|
|
|
|
if (WARN_ON(!phb))
|
|
return;
|
|
|
|
list_for_each_entry(entry, &pdev->msi_list, list) {
|
|
if (entry->irq == NO_IRQ)
|
|
continue;
|
|
irq_set_msi_desc(entry->irq, NULL);
|
|
msi_bitmap_free_hwirqs(&phb->msi_bmp,
|
|
virq_to_hw(entry->irq) - phb->msi_base, 1);
|
|
irq_dispose_mapping(entry->irq);
|
|
}
|
|
}
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose,
|
|
struct OpalIoPhbErrorCommon *common)
|
|
{
|
|
struct OpalIoP7IOCPhbErrorData *data;
|
|
int i;
|
|
|
|
data = (struct OpalIoP7IOCPhbErrorData *)common;
|
|
pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n",
|
|
hose->global_number, common->version);
|
|
|
|
if (data->brdgCtl)
|
|
pr_info("brdgCtl: %08x\n",
|
|
data->brdgCtl);
|
|
if (data->portStatusReg || data->rootCmplxStatus ||
|
|
data->busAgentStatus)
|
|
pr_info("UtlSts: %08x %08x %08x\n",
|
|
data->portStatusReg, data->rootCmplxStatus,
|
|
data->busAgentStatus);
|
|
if (data->deviceStatus || data->slotStatus ||
|
|
data->linkStatus || data->devCmdStatus ||
|
|
data->devSecStatus)
|
|
pr_info("RootSts: %08x %08x %08x %08x %08x\n",
|
|
data->deviceStatus, data->slotStatus,
|
|
data->linkStatus, data->devCmdStatus,
|
|
data->devSecStatus);
|
|
if (data->rootErrorStatus || data->uncorrErrorStatus ||
|
|
data->corrErrorStatus)
|
|
pr_info("RootErrSts: %08x %08x %08x\n",
|
|
data->rootErrorStatus, data->uncorrErrorStatus,
|
|
data->corrErrorStatus);
|
|
if (data->tlpHdr1 || data->tlpHdr2 ||
|
|
data->tlpHdr3 || data->tlpHdr4)
|
|
pr_info("RootErrLog: %08x %08x %08x %08x\n",
|
|
data->tlpHdr1, data->tlpHdr2,
|
|
data->tlpHdr3, data->tlpHdr4);
|
|
if (data->sourceId || data->errorClass ||
|
|
data->correlator)
|
|
pr_info("RootErrLog1: %08x %016llx %016llx\n",
|
|
data->sourceId, data->errorClass,
|
|
data->correlator);
|
|
if (data->p7iocPlssr || data->p7iocCsr)
|
|
pr_info("PhbSts: %016llx %016llx\n",
|
|
data->p7iocPlssr, data->p7iocCsr);
|
|
if (data->lemFir)
|
|
pr_info("Lem: %016llx %016llx %016llx\n",
|
|
data->lemFir, data->lemErrorMask,
|
|
data->lemWOF);
|
|
if (data->phbErrorStatus)
|
|
pr_info("PhbErr: %016llx %016llx %016llx %016llx\n",
|
|
data->phbErrorStatus, data->phbFirstErrorStatus,
|
|
data->phbErrorLog0, data->phbErrorLog1);
|
|
if (data->mmioErrorStatus)
|
|
pr_info("OutErr: %016llx %016llx %016llx %016llx\n",
|
|
data->mmioErrorStatus, data->mmioFirstErrorStatus,
|
|
data->mmioErrorLog0, data->mmioErrorLog1);
|
|
if (data->dma0ErrorStatus)
|
|
pr_info("InAErr: %016llx %016llx %016llx %016llx\n",
|
|
data->dma0ErrorStatus, data->dma0FirstErrorStatus,
|
|
data->dma0ErrorLog0, data->dma0ErrorLog1);
|
|
if (data->dma1ErrorStatus)
|
|
pr_info("InBErr: %016llx %016llx %016llx %016llx\n",
|
|
data->dma1ErrorStatus, data->dma1FirstErrorStatus,
|
|
data->dma1ErrorLog0, data->dma1ErrorLog1);
|
|
|
|
for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
|
|
if ((data->pestA[i] >> 63) == 0 &&
|
|
(data->pestB[i] >> 63) == 0)
|
|
continue;
|
|
|
|
pr_info("PE[%3d] A/B: %016llx %016llx\n",
|
|
i, data->pestA[i], data->pestB[i]);
|
|
}
|
|
}
|
|
|
|
static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose,
|
|
struct OpalIoPhbErrorCommon *common)
|
|
{
|
|
struct OpalIoPhb3ErrorData *data;
|
|
int i;
|
|
|
|
data = (struct OpalIoPhb3ErrorData*)common;
|
|
pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n",
|
|
hose->global_number, common->version);
|
|
if (data->brdgCtl)
|
|
pr_info("brdgCtl: %08x\n",
|
|
data->brdgCtl);
|
|
if (data->portStatusReg || data->rootCmplxStatus ||
|
|
data->busAgentStatus)
|
|
pr_info("UtlSts: %08x %08x %08x\n",
|
|
data->portStatusReg, data->rootCmplxStatus,
|
|
data->busAgentStatus);
|
|
if (data->deviceStatus || data->slotStatus ||
|
|
data->linkStatus || data->devCmdStatus ||
|
|
data->devSecStatus)
|
|
pr_info("RootSts: %08x %08x %08x %08x %08x\n",
|
|
data->deviceStatus, data->slotStatus,
|
|
data->linkStatus, data->devCmdStatus,
|
|
data->devSecStatus);
|
|
if (data->rootErrorStatus || data->uncorrErrorStatus ||
|
|
data->corrErrorStatus)
|
|
pr_info("RootErrSts: %08x %08x %08x\n",
|
|
data->rootErrorStatus, data->uncorrErrorStatus,
|
|
data->corrErrorStatus);
|
|
if (data->tlpHdr1 || data->tlpHdr2 ||
|
|
data->tlpHdr3 || data->tlpHdr4)
|
|
pr_info("RootErrLog: %08x %08x %08x %08x\n",
|
|
data->tlpHdr1, data->tlpHdr2,
|
|
data->tlpHdr3, data->tlpHdr4);
|
|
if (data->sourceId || data->errorClass ||
|
|
data->correlator)
|
|
pr_info("RootErrLog1: %08x %016llx %016llx\n",
|
|
data->sourceId, data->errorClass,
|
|
data->correlator);
|
|
if (data->nFir)
|
|
pr_info("nFir: %016llx %016llx %016llx\n",
|
|
data->nFir, data->nFirMask,
|
|
data->nFirWOF);
|
|
if (data->phbPlssr || data->phbCsr)
|
|
pr_info("PhbSts: %016llx %016llx\n",
|
|
data->phbPlssr, data->phbCsr);
|
|
if (data->lemFir)
|
|
pr_info("Lem: %016llx %016llx %016llx\n",
|
|
data->lemFir, data->lemErrorMask,
|
|
data->lemWOF);
|
|
if (data->phbErrorStatus)
|
|
pr_info("PhbErr: %016llx %016llx %016llx %016llx\n",
|
|
data->phbErrorStatus, data->phbFirstErrorStatus,
|
|
data->phbErrorLog0, data->phbErrorLog1);
|
|
if (data->mmioErrorStatus)
|
|
pr_info("OutErr: %016llx %016llx %016llx %016llx\n",
|
|
data->mmioErrorStatus, data->mmioFirstErrorStatus,
|
|
data->mmioErrorLog0, data->mmioErrorLog1);
|
|
if (data->dma0ErrorStatus)
|
|
pr_info("InAErr: %016llx %016llx %016llx %016llx\n",
|
|
data->dma0ErrorStatus, data->dma0FirstErrorStatus,
|
|
data->dma0ErrorLog0, data->dma0ErrorLog1);
|
|
if (data->dma1ErrorStatus)
|
|
pr_info("InBErr: %016llx %016llx %016llx %016llx\n",
|
|
data->dma1ErrorStatus, data->dma1FirstErrorStatus,
|
|
data->dma1ErrorLog0, data->dma1ErrorLog1);
|
|
|
|
for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) {
|
|
if ((data->pestA[i] >> 63) == 0 &&
|
|
(data->pestB[i] >> 63) == 0)
|
|
continue;
|
|
|
|
pr_info("PE[%3d] A/B: %016llx %016llx\n",
|
|
i, data->pestA[i], data->pestB[i]);
|
|
}
|
|
}
|
|
|
|
void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
|
|
unsigned char *log_buff)
|
|
{
|
|
struct OpalIoPhbErrorCommon *common;
|
|
|
|
if (!hose || !log_buff)
|
|
return;
|
|
|
|
common = (struct OpalIoPhbErrorCommon *)log_buff;
|
|
switch (common->ioType) {
|
|
case OPAL_PHB_ERROR_DATA_TYPE_P7IOC:
|
|
pnv_pci_dump_p7ioc_diag_data(hose, common);
|
|
break;
|
|
case OPAL_PHB_ERROR_DATA_TYPE_PHB3:
|
|
pnv_pci_dump_phb3_diag_data(hose, common);
|
|
break;
|
|
default:
|
|
pr_warn("%s: Unrecognized ioType %d\n",
|
|
__func__, common->ioType);
|
|
}
|
|
}
|
|
|
|
static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
|
|
{
|
|
unsigned long flags, rc;
|
|
int has_diag;
|
|
|
|
spin_lock_irqsave(&phb->lock, flags);
|
|
|
|
rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
|
|
PNV_PCI_DIAG_BUF_SIZE);
|
|
has_diag = (rc == OPAL_SUCCESS);
|
|
|
|
rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
|
|
OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
|
|
if (rc) {
|
|
pr_warning("PCI %d: Failed to clear EEH freeze state"
|
|
" for PE#%d, err %ld\n",
|
|
phb->hose->global_number, pe_no, rc);
|
|
|
|
/* For now, let's only display the diag buffer when we fail to clear
|
|
* the EEH status. We'll do more sensible things later when we have
|
|
* proper EEH support. We need to make sure we don't pollute ourselves
|
|
* with the normal errors generated when probing empty slots
|
|
*/
|
|
if (has_diag)
|
|
pnv_pci_dump_phb_diag_data(phb->hose, phb->diag.blob);
|
|
else
|
|
pr_warning("PCI %d: No diag data available\n",
|
|
phb->hose->global_number);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&phb->lock, flags);
|
|
}
|
|
|
|
static void pnv_pci_config_check_eeh(struct pnv_phb *phb,
|
|
struct device_node *dn)
|
|
{
|
|
s64 rc;
|
|
u8 fstate;
|
|
__be16 pcierr;
|
|
u32 pe_no;
|
|
|
|
/*
|
|
* Get the PE#. During the PCI probe stage, we might not
|
|
* setup that yet. So all ER errors should be mapped to
|
|
* reserved PE.
|
|
*/
|
|
pe_no = PCI_DN(dn)->pe_number;
|
|
if (pe_no == IODA_INVALID_PE) {
|
|
if (phb->type == PNV_PHB_P5IOC2)
|
|
pe_no = 0;
|
|
else
|
|
pe_no = phb->ioda.reserved_pe;
|
|
}
|
|
|
|
/* Read freeze status */
|
|
rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr,
|
|
NULL);
|
|
if (rc) {
|
|
pr_warning("%s: Can't read EEH status (PE#%d) for "
|
|
"%s, err %lld\n",
|
|
__func__, pe_no, dn->full_name, rc);
|
|
return;
|
|
}
|
|
cfg_dbg(" -> EEH check, bdfn=%04x PE#%d fstate=%x\n",
|
|
(PCI_DN(dn)->busno << 8) | (PCI_DN(dn)->devfn),
|
|
pe_no, fstate);
|
|
if (fstate != 0)
|
|
pnv_pci_handle_eeh_config(phb, pe_no);
|
|
}
|
|
|
|
int pnv_pci_cfg_read(struct device_node *dn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
struct pci_dn *pdn = PCI_DN(dn);
|
|
struct pnv_phb *phb = pdn->phb->private_data;
|
|
u32 bdfn = (pdn->busno << 8) | pdn->devfn;
|
|
s64 rc;
|
|
|
|
switch (size) {
|
|
case 1: {
|
|
u8 v8;
|
|
rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8);
|
|
*val = (rc == OPAL_SUCCESS) ? v8 : 0xff;
|
|
break;
|
|
}
|
|
case 2: {
|
|
__be16 v16;
|
|
rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where,
|
|
&v16);
|
|
*val = (rc == OPAL_SUCCESS) ? be16_to_cpu(v16) : 0xffff;
|
|
break;
|
|
}
|
|
case 4: {
|
|
__be32 v32;
|
|
rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32);
|
|
*val = (rc == OPAL_SUCCESS) ? be32_to_cpu(v32) : 0xffffffff;
|
|
break;
|
|
}
|
|
default:
|
|
return PCIBIOS_FUNC_NOT_SUPPORTED;
|
|
}
|
|
|
|
cfg_dbg("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
|
|
__func__, pdn->busno, pdn->devfn, where, size, *val);
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int pnv_pci_cfg_write(struct device_node *dn,
|
|
int where, int size, u32 val)
|
|
{
|
|
struct pci_dn *pdn = PCI_DN(dn);
|
|
struct pnv_phb *phb = pdn->phb->private_data;
|
|
u32 bdfn = (pdn->busno << 8) | pdn->devfn;
|
|
|
|
cfg_dbg("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
|
|
pdn->busno, pdn->devfn, where, size, val);
|
|
switch (size) {
|
|
case 1:
|
|
opal_pci_config_write_byte(phb->opal_id, bdfn, where, val);
|
|
break;
|
|
case 2:
|
|
opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val);
|
|
break;
|
|
case 4:
|
|
opal_pci_config_write_word(phb->opal_id, bdfn, where, val);
|
|
break;
|
|
default:
|
|
return PCIBIOS_FUNC_NOT_SUPPORTED;
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
#if CONFIG_EEH
|
|
static bool pnv_pci_cfg_check(struct pci_controller *hose,
|
|
struct device_node *dn)
|
|
{
|
|
struct eeh_dev *edev = NULL;
|
|
struct pnv_phb *phb = hose->private_data;
|
|
|
|
/* EEH not enabled ? */
|
|
if (!(phb->flags & PNV_PHB_FLAG_EEH))
|
|
return true;
|
|
|
|
/* PE reset or device removed ? */
|
|
edev = of_node_to_eeh_dev(dn);
|
|
if (edev) {
|
|
if (edev->pe &&
|
|
(edev->pe->state & EEH_PE_RESET))
|
|
return false;
|
|
|
|
if (edev->mode & EEH_DEV_REMOVED)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
#else
|
|
static inline pnv_pci_cfg_check(struct pci_controller *hose,
|
|
struct device_node *dn)
|
|
{
|
|
return true;
|
|
}
|
|
#endif /* CONFIG_EEH */
|
|
|
|
static int pnv_pci_read_config(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
|
|
struct pci_dn *pdn;
|
|
struct pnv_phb *phb;
|
|
bool found = false;
|
|
int ret;
|
|
|
|
*val = 0xFFFFFFFF;
|
|
for (dn = busdn->child; dn; dn = dn->sibling) {
|
|
pdn = PCI_DN(dn);
|
|
if (pdn && pdn->devfn == devfn) {
|
|
phb = pdn->phb->private_data;
|
|
found = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
ret = pnv_pci_cfg_read(dn, where, size, val);
|
|
if (phb->flags & PNV_PHB_FLAG_EEH) {
|
|
if (*val == EEH_IO_ERROR_VALUE(size) &&
|
|
eeh_dev_check_failure(of_node_to_eeh_dev(dn)))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
} else {
|
|
pnv_pci_config_check_eeh(phb, dn);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pnv_pci_write_config(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
struct device_node *dn, *busdn = pci_bus_to_OF_node(bus);
|
|
struct pci_dn *pdn;
|
|
struct pnv_phb *phb;
|
|
bool found = false;
|
|
int ret;
|
|
|
|
for (dn = busdn->child; dn; dn = dn->sibling) {
|
|
pdn = PCI_DN(dn);
|
|
if (pdn && pdn->devfn == devfn) {
|
|
phb = pdn->phb->private_data;
|
|
found = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!found || !pnv_pci_cfg_check(pdn->phb, dn))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
ret = pnv_pci_cfg_write(dn, where, size, val);
|
|
if (!(phb->flags & PNV_PHB_FLAG_EEH))
|
|
pnv_pci_config_check_eeh(phb, dn);
|
|
|
|
return ret;
|
|
}
|
|
|
|
struct pci_ops pnv_pci_ops = {
|
|
.read = pnv_pci_read_config,
|
|
.write = pnv_pci_write_config,
|
|
};
|
|
|
|
static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
|
|
unsigned long uaddr, enum dma_data_direction direction,
|
|
struct dma_attrs *attrs, bool rm)
|
|
{
|
|
u64 proto_tce;
|
|
__be64 *tcep, *tces;
|
|
u64 rpn;
|
|
|
|
proto_tce = TCE_PCI_READ; // Read allowed
|
|
|
|
if (direction != DMA_TO_DEVICE)
|
|
proto_tce |= TCE_PCI_WRITE;
|
|
|
|
tces = tcep = ((__be64 *)tbl->it_base) + index - tbl->it_offset;
|
|
rpn = __pa(uaddr) >> TCE_SHIFT;
|
|
|
|
while (npages--)
|
|
*(tcep++) = cpu_to_be64(proto_tce | (rpn++ << TCE_RPN_SHIFT));
|
|
|
|
/* Some implementations won't cache invalid TCEs and thus may not
|
|
* need that flush. We'll probably turn it_type into a bit mask
|
|
* of flags if that becomes the case
|
|
*/
|
|
if (tbl->it_type & TCE_PCI_SWINV_CREATE)
|
|
pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1, rm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pnv_tce_build_vm(struct iommu_table *tbl, long index, long npages,
|
|
unsigned long uaddr,
|
|
enum dma_data_direction direction,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
return pnv_tce_build(tbl, index, npages, uaddr, direction, attrs,
|
|
false);
|
|
}
|
|
|
|
static void pnv_tce_free(struct iommu_table *tbl, long index, long npages,
|
|
bool rm)
|
|
{
|
|
__be64 *tcep, *tces;
|
|
|
|
tces = tcep = ((__be64 *)tbl->it_base) + index - tbl->it_offset;
|
|
|
|
while (npages--)
|
|
*(tcep++) = cpu_to_be64(0);
|
|
|
|
if (tbl->it_type & TCE_PCI_SWINV_FREE)
|
|
pnv_pci_ioda_tce_invalidate(tbl, tces, tcep - 1, rm);
|
|
}
|
|
|
|
static void pnv_tce_free_vm(struct iommu_table *tbl, long index, long npages)
|
|
{
|
|
pnv_tce_free(tbl, index, npages, false);
|
|
}
|
|
|
|
static unsigned long pnv_tce_get(struct iommu_table *tbl, long index)
|
|
{
|
|
return ((u64 *)tbl->it_base)[index - tbl->it_offset];
|
|
}
|
|
|
|
static int pnv_tce_build_rm(struct iommu_table *tbl, long index, long npages,
|
|
unsigned long uaddr,
|
|
enum dma_data_direction direction,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
return pnv_tce_build(tbl, index, npages, uaddr, direction, attrs, true);
|
|
}
|
|
|
|
static void pnv_tce_free_rm(struct iommu_table *tbl, long index, long npages)
|
|
{
|
|
pnv_tce_free(tbl, index, npages, true);
|
|
}
|
|
|
|
void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
|
|
void *tce_mem, u64 tce_size,
|
|
u64 dma_offset)
|
|
{
|
|
tbl->it_blocksize = 16;
|
|
tbl->it_base = (unsigned long)tce_mem;
|
|
tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K;
|
|
tbl->it_offset = dma_offset >> tbl->it_page_shift;
|
|
tbl->it_index = 0;
|
|
tbl->it_size = tce_size >> 3;
|
|
tbl->it_busno = 0;
|
|
tbl->it_type = TCE_PCI;
|
|
}
|
|
|
|
static struct iommu_table *pnv_pci_setup_bml_iommu(struct pci_controller *hose)
|
|
{
|
|
struct iommu_table *tbl;
|
|
const __be64 *basep, *swinvp;
|
|
const __be32 *sizep;
|
|
|
|
basep = of_get_property(hose->dn, "linux,tce-base", NULL);
|
|
sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
|
|
if (basep == NULL || sizep == NULL) {
|
|
pr_err("PCI: %s has missing tce entries !\n",
|
|
hose->dn->full_name);
|
|
return NULL;
|
|
}
|
|
tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
|
|
if (WARN_ON(!tbl))
|
|
return NULL;
|
|
pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
|
|
be32_to_cpup(sizep), 0);
|
|
iommu_init_table(tbl, hose->node);
|
|
iommu_register_group(tbl, pci_domain_nr(hose->bus), 0);
|
|
|
|
/* Deal with SW invalidated TCEs when needed (BML way) */
|
|
swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
|
|
NULL);
|
|
if (swinvp) {
|
|
tbl->it_busno = be64_to_cpu(swinvp[1]);
|
|
tbl->it_index = (unsigned long)ioremap(be64_to_cpup(swinvp), 8);
|
|
tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
|
|
}
|
|
return tbl;
|
|
}
|
|
|
|
static void pnv_pci_dma_fallback_setup(struct pci_controller *hose,
|
|
struct pci_dev *pdev)
|
|
{
|
|
struct device_node *np = pci_bus_to_OF_node(hose->bus);
|
|
struct pci_dn *pdn;
|
|
|
|
if (np == NULL)
|
|
return;
|
|
pdn = PCI_DN(np);
|
|
if (!pdn->iommu_table)
|
|
pdn->iommu_table = pnv_pci_setup_bml_iommu(hose);
|
|
if (!pdn->iommu_table)
|
|
return;
|
|
set_iommu_table_base_and_group(&pdev->dev, pdn->iommu_table);
|
|
}
|
|
|
|
static void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
|
|
/* If we have no phb structure, try to setup a fallback based on
|
|
* the device-tree (RTAS PCI for example)
|
|
*/
|
|
if (phb && phb->dma_dev_setup)
|
|
phb->dma_dev_setup(phb, pdev);
|
|
else
|
|
pnv_pci_dma_fallback_setup(hose, pdev);
|
|
}
|
|
|
|
int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
|
|
if (phb && phb->dma_set_mask)
|
|
return phb->dma_set_mask(phb, pdev, dma_mask);
|
|
return __dma_set_mask(&pdev->dev, dma_mask);
|
|
}
|
|
|
|
void pnv_pci_shutdown(void)
|
|
{
|
|
struct pci_controller *hose;
|
|
|
|
list_for_each_entry(hose, &hose_list, list_node) {
|
|
struct pnv_phb *phb = hose->private_data;
|
|
|
|
if (phb && phb->shutdown)
|
|
phb->shutdown(phb);
|
|
}
|
|
}
|
|
|
|
/* Fixup wrong class code in p7ioc and p8 root complex */
|
|
static void pnv_p7ioc_rc_quirk(struct pci_dev *dev)
|
|
{
|
|
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
|
|
|
|
static int pnv_pci_probe_mode(struct pci_bus *bus)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
const __be64 *tstamp;
|
|
u64 now, target;
|
|
|
|
|
|
/* We hijack this as a way to ensure we have waited long
|
|
* enough since the reset was lifted on the PCI bus
|
|
*/
|
|
if (bus != hose->bus)
|
|
return PCI_PROBE_NORMAL;
|
|
tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL);
|
|
if (!tstamp || !*tstamp)
|
|
return PCI_PROBE_NORMAL;
|
|
|
|
now = mftb() / tb_ticks_per_usec;
|
|
target = (be64_to_cpup(tstamp) / tb_ticks_per_usec)
|
|
+ PCI_RESET_DELAY_US;
|
|
|
|
pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n",
|
|
hose->global_number, target, now);
|
|
|
|
if (now < target)
|
|
msleep((target - now + 999) / 1000);
|
|
|
|
return PCI_PROBE_NORMAL;
|
|
}
|
|
|
|
void __init pnv_pci_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN);
|
|
|
|
/* OPAL absent, try POPAL first then RTAS detection of PHBs */
|
|
if (!firmware_has_feature(FW_FEATURE_OPAL)) {
|
|
#ifdef CONFIG_PPC_POWERNV_RTAS
|
|
init_pci_config_tokens();
|
|
find_and_init_phbs();
|
|
#endif /* CONFIG_PPC_POWERNV_RTAS */
|
|
}
|
|
/* OPAL is here, do our normal stuff */
|
|
else {
|
|
int found_ioda = 0;
|
|
|
|
/* Look for IODA IO-Hubs. We don't support mixing IODA
|
|
* and p5ioc2 due to the need to change some global
|
|
* probing flags
|
|
*/
|
|
for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
|
|
pnv_pci_init_ioda_hub(np);
|
|
found_ioda = 1;
|
|
}
|
|
|
|
/* Look for p5ioc2 IO-Hubs */
|
|
if (!found_ioda)
|
|
for_each_compatible_node(np, NULL, "ibm,p5ioc2")
|
|
pnv_pci_init_p5ioc2_hub(np);
|
|
|
|
/* Look for ioda2 built-in PHB3's */
|
|
for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
|
|
pnv_pci_init_ioda2_phb(np);
|
|
}
|
|
|
|
/* Setup the linkage between OF nodes and PHBs */
|
|
pci_devs_phb_init();
|
|
|
|
/* Configure IOMMU DMA hooks */
|
|
ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
|
|
ppc_md.tce_build = pnv_tce_build_vm;
|
|
ppc_md.tce_free = pnv_tce_free_vm;
|
|
ppc_md.tce_build_rm = pnv_tce_build_rm;
|
|
ppc_md.tce_free_rm = pnv_tce_free_rm;
|
|
ppc_md.tce_get = pnv_tce_get;
|
|
ppc_md.pci_probe_mode = pnv_pci_probe_mode;
|
|
set_pci_dma_ops(&dma_iommu_ops);
|
|
|
|
/* Configure MSIs */
|
|
#ifdef CONFIG_PCI_MSI
|
|
ppc_md.msi_check_device = pnv_msi_check_device;
|
|
ppc_md.setup_msi_irqs = pnv_setup_msi_irqs;
|
|
ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs;
|
|
#endif
|
|
}
|
|
|
|
static int tce_iommu_bus_notifier(struct notifier_block *nb,
|
|
unsigned long action, void *data)
|
|
{
|
|
struct device *dev = data;
|
|
|
|
switch (action) {
|
|
case BUS_NOTIFY_ADD_DEVICE:
|
|
return iommu_add_device(dev);
|
|
case BUS_NOTIFY_DEL_DEVICE:
|
|
if (dev->iommu_group)
|
|
iommu_del_device(dev);
|
|
return 0;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static struct notifier_block tce_iommu_bus_nb = {
|
|
.notifier_call = tce_iommu_bus_notifier,
|
|
};
|
|
|
|
static int __init tce_iommu_bus_notifier_init(void)
|
|
{
|
|
bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb);
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall_sync(tce_iommu_bus_notifier_init);
|