1
0
mirror of https://github.com/torvalds/linux.git synced 2024-12-20 18:11:47 +00:00
linux/arch/x86/kernel/tsc_sync.c
Kefeng Wang 8d3bcc441e x86: Use pr_warn instead of pr_warning
As said in commit f2c2cbcc35 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.

Link: http://lkml.kernel.org/r/20191018031850.48498-7-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-10-18 15:00:18 +02:00

495 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* check TSC synchronization.
*
* Copyright (C) 2006, Red Hat, Inc., Ingo Molnar
*
* We check whether all boot CPUs have their TSC's synchronized,
* print a warning if not and turn off the TSC clock-source.
*
* The warp-check is point-to-point between two CPUs, the CPU
* initiating the bootup is the 'source CPU', the freshly booting
* CPU is the 'target CPU'.
*
* Only two CPUs may participate - they can enter in any order.
* ( The serial nature of the boot logic and the CPU hotplug lock
* protects against more than 2 CPUs entering this code. )
*/
#include <linux/topology.h>
#include <linux/spinlock.h>
#include <linux/kernel.h>
#include <linux/smp.h>
#include <linux/nmi.h>
#include <asm/tsc.h>
struct tsc_adjust {
s64 bootval;
s64 adjusted;
unsigned long nextcheck;
bool warned;
};
static DEFINE_PER_CPU(struct tsc_adjust, tsc_adjust);
/*
* TSC's on different sockets may be reset asynchronously.
* This may cause the TSC ADJUST value on socket 0 to be NOT 0.
*/
bool __read_mostly tsc_async_resets;
void mark_tsc_async_resets(char *reason)
{
if (tsc_async_resets)
return;
tsc_async_resets = true;
pr_info("tsc: Marking TSC async resets true due to %s\n", reason);
}
void tsc_verify_tsc_adjust(bool resume)
{
struct tsc_adjust *adj = this_cpu_ptr(&tsc_adjust);
s64 curval;
if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST))
return;
/* Skip unnecessary error messages if TSC already unstable */
if (check_tsc_unstable())
return;
/* Rate limit the MSR check */
if (!resume && time_before(jiffies, adj->nextcheck))
return;
adj->nextcheck = jiffies + HZ;
rdmsrl(MSR_IA32_TSC_ADJUST, curval);
if (adj->adjusted == curval)
return;
/* Restore the original value */
wrmsrl(MSR_IA32_TSC_ADJUST, adj->adjusted);
if (!adj->warned || resume) {
pr_warn(FW_BUG "TSC ADJUST differs: CPU%u %lld --> %lld. Restoring\n",
smp_processor_id(), adj->adjusted, curval);
adj->warned = true;
}
}
static void tsc_sanitize_first_cpu(struct tsc_adjust *cur, s64 bootval,
unsigned int cpu, bool bootcpu)
{
/*
* First online CPU in a package stores the boot value in the
* adjustment value. This value might change later via the sync
* mechanism. If that fails we still can yell about boot values not
* being consistent.
*
* On the boot cpu we just force set the ADJUST value to 0 if it's
* non zero. We don't do that on non boot cpus because physical
* hotplug should have set the ADJUST register to a value > 0 so
* the TSC is in sync with the already running cpus.
*
* Also don't force the ADJUST value to zero if that is a valid value
* for socket 0 as determined by the system arch. This is required
* when multiple sockets are reset asynchronously with each other
* and socket 0 may not have an TSC ADJUST value of 0.
*/
if (bootcpu && bootval != 0) {
if (likely(!tsc_async_resets)) {
pr_warn(FW_BUG "TSC ADJUST: CPU%u: %lld force to 0\n",
cpu, bootval);
wrmsrl(MSR_IA32_TSC_ADJUST, 0);
bootval = 0;
} else {
pr_info("TSC ADJUST: CPU%u: %lld NOT forced to 0\n",
cpu, bootval);
}
}
cur->adjusted = bootval;
}
#ifndef CONFIG_SMP
bool __init tsc_store_and_check_tsc_adjust(bool bootcpu)
{
struct tsc_adjust *cur = this_cpu_ptr(&tsc_adjust);
s64 bootval;
if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST))
return false;
/* Skip unnecessary error messages if TSC already unstable */
if (check_tsc_unstable())
return false;
rdmsrl(MSR_IA32_TSC_ADJUST, bootval);
cur->bootval = bootval;
cur->nextcheck = jiffies + HZ;
tsc_sanitize_first_cpu(cur, bootval, smp_processor_id(), bootcpu);
return false;
}
#else /* !CONFIG_SMP */
/*
* Store and check the TSC ADJUST MSR if available
*/
bool tsc_store_and_check_tsc_adjust(bool bootcpu)
{
struct tsc_adjust *ref, *cur = this_cpu_ptr(&tsc_adjust);
unsigned int refcpu, cpu = smp_processor_id();
struct cpumask *mask;
s64 bootval;
if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST))
return false;
rdmsrl(MSR_IA32_TSC_ADJUST, bootval);
cur->bootval = bootval;
cur->nextcheck = jiffies + HZ;
cur->warned = false;
/*
* If a non-zero TSC value for socket 0 may be valid then the default
* adjusted value cannot assumed to be zero either.
*/
if (tsc_async_resets)
cur->adjusted = bootval;
/*
* Check whether this CPU is the first in a package to come up. In
* this case do not check the boot value against another package
* because the new package might have been physically hotplugged,
* where TSC_ADJUST is expected to be different. When called on the
* boot CPU topology_core_cpumask() might not be available yet.
*/
mask = topology_core_cpumask(cpu);
refcpu = mask ? cpumask_any_but(mask, cpu) : nr_cpu_ids;
if (refcpu >= nr_cpu_ids) {
tsc_sanitize_first_cpu(cur, bootval, smp_processor_id(),
bootcpu);
return false;
}
ref = per_cpu_ptr(&tsc_adjust, refcpu);
/*
* Compare the boot value and complain if it differs in the
* package.
*/
if (bootval != ref->bootval)
printk_once(FW_BUG "TSC ADJUST differs within socket(s), fixing all errors\n");
/*
* The TSC_ADJUST values in a package must be the same. If the boot
* value on this newly upcoming CPU differs from the adjustment
* value of the already online CPU in this package, set it to that
* adjusted value.
*/
if (bootval != ref->adjusted) {
cur->adjusted = ref->adjusted;
wrmsrl(MSR_IA32_TSC_ADJUST, ref->adjusted);
}
/*
* We have the TSCs forced to be in sync on this package. Skip sync
* test:
*/
return true;
}
/*
* Entry/exit counters that make sure that both CPUs
* run the measurement code at once:
*/
static atomic_t start_count;
static atomic_t stop_count;
static atomic_t skip_test;
static atomic_t test_runs;
/*
* We use a raw spinlock in this exceptional case, because
* we want to have the fastest, inlined, non-debug version
* of a critical section, to be able to prove TSC time-warps:
*/
static arch_spinlock_t sync_lock = __ARCH_SPIN_LOCK_UNLOCKED;
static cycles_t last_tsc;
static cycles_t max_warp;
static int nr_warps;
static int random_warps;
/*
* TSC-warp measurement loop running on both CPUs. This is not called
* if there is no TSC.
*/
static cycles_t check_tsc_warp(unsigned int timeout)
{
cycles_t start, now, prev, end, cur_max_warp = 0;
int i, cur_warps = 0;
start = rdtsc_ordered();
/*
* The measurement runs for 'timeout' msecs:
*/
end = start + (cycles_t) tsc_khz * timeout;
now = start;
for (i = 0; ; i++) {
/*
* We take the global lock, measure TSC, save the
* previous TSC that was measured (possibly on
* another CPU) and update the previous TSC timestamp.
*/
arch_spin_lock(&sync_lock);
prev = last_tsc;
now = rdtsc_ordered();
last_tsc = now;
arch_spin_unlock(&sync_lock);
/*
* Be nice every now and then (and also check whether
* measurement is done [we also insert a 10 million
* loops safety exit, so we dont lock up in case the
* TSC readout is totally broken]):
*/
if (unlikely(!(i & 7))) {
if (now > end || i > 10000000)
break;
cpu_relax();
touch_nmi_watchdog();
}
/*
* Outside the critical section we can now see whether
* we saw a time-warp of the TSC going backwards:
*/
if (unlikely(prev > now)) {
arch_spin_lock(&sync_lock);
max_warp = max(max_warp, prev - now);
cur_max_warp = max_warp;
/*
* Check whether this bounces back and forth. Only
* one CPU should observe time going backwards.
*/
if (cur_warps != nr_warps)
random_warps++;
nr_warps++;
cur_warps = nr_warps;
arch_spin_unlock(&sync_lock);
}
}
WARN(!(now-start),
"Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
now-start, end-start);
return cur_max_warp;
}
/*
* If the target CPU coming online doesn't have any of its core-siblings
* online, a timeout of 20msec will be used for the TSC-warp measurement
* loop. Otherwise a smaller timeout of 2msec will be used, as we have some
* information about this socket already (and this information grows as we
* have more and more logical-siblings in that socket).
*
* Ideally we should be able to skip the TSC sync check on the other
* core-siblings, if the first logical CPU in a socket passed the sync test.
* But as the TSC is per-logical CPU and can potentially be modified wrongly
* by the bios, TSC sync test for smaller duration should be able
* to catch such errors. Also this will catch the condition where all the
* cores in the socket doesn't get reset at the same time.
*/
static inline unsigned int loop_timeout(int cpu)
{
return (cpumask_weight(topology_core_cpumask(cpu)) > 1) ? 2 : 20;
}
/*
* Source CPU calls into this - it waits for the freshly booted
* target CPU to arrive and then starts the measurement:
*/
void check_tsc_sync_source(int cpu)
{
int cpus = 2;
/*
* No need to check if we already know that the TSC is not
* synchronized or if we have no TSC.
*/
if (unsynchronized_tsc())
return;
/*
* Set the maximum number of test runs to
* 1 if the CPU does not provide the TSC_ADJUST MSR
* 3 if the MSR is available, so the target can try to adjust
*/
if (!boot_cpu_has(X86_FEATURE_TSC_ADJUST))
atomic_set(&test_runs, 1);
else
atomic_set(&test_runs, 3);
retry:
/*
* Wait for the target to start or to skip the test:
*/
while (atomic_read(&start_count) != cpus - 1) {
if (atomic_read(&skip_test) > 0) {
atomic_set(&skip_test, 0);
return;
}
cpu_relax();
}
/*
* Trigger the target to continue into the measurement too:
*/
atomic_inc(&start_count);
check_tsc_warp(loop_timeout(cpu));
while (atomic_read(&stop_count) != cpus-1)
cpu_relax();
/*
* If the test was successful set the number of runs to zero and
* stop. If not, decrement the number of runs an check if we can
* retry. In case of random warps no retry is attempted.
*/
if (!nr_warps) {
atomic_set(&test_runs, 0);
pr_debug("TSC synchronization [CPU#%d -> CPU#%d]: passed\n",
smp_processor_id(), cpu);
} else if (atomic_dec_and_test(&test_runs) || random_warps) {
/* Force it to 0 if random warps brought us here */
atomic_set(&test_runs, 0);
pr_warn("TSC synchronization [CPU#%d -> CPU#%d]:\n",
smp_processor_id(), cpu);
pr_warn("Measured %Ld cycles TSC warp between CPUs, "
"turning off TSC clock.\n", max_warp);
if (random_warps)
pr_warn("TSC warped randomly between CPUs\n");
mark_tsc_unstable("check_tsc_sync_source failed");
}
/*
* Reset it - just in case we boot another CPU later:
*/
atomic_set(&start_count, 0);
random_warps = 0;
nr_warps = 0;
max_warp = 0;
last_tsc = 0;
/*
* Let the target continue with the bootup:
*/
atomic_inc(&stop_count);
/*
* Retry, if there is a chance to do so.
*/
if (atomic_read(&test_runs) > 0)
goto retry;
}
/*
* Freshly booted CPUs call into this:
*/
void check_tsc_sync_target(void)
{
struct tsc_adjust *cur = this_cpu_ptr(&tsc_adjust);
unsigned int cpu = smp_processor_id();
cycles_t cur_max_warp, gbl_max_warp;
int cpus = 2;
/* Also aborts if there is no TSC. */
if (unsynchronized_tsc())
return;
/*
* Store, verify and sanitize the TSC adjust register. If
* successful skip the test.
*
* The test is also skipped when the TSC is marked reliable. This
* is true for SoCs which have no fallback clocksource. On these
* SoCs the TSC is frequency synchronized, but still the TSC ADJUST
* register might have been wreckaged by the BIOS..
*/
if (tsc_store_and_check_tsc_adjust(false) || tsc_clocksource_reliable) {
atomic_inc(&skip_test);
return;
}
retry:
/*
* Register this CPU's participation and wait for the
* source CPU to start the measurement:
*/
atomic_inc(&start_count);
while (atomic_read(&start_count) != cpus)
cpu_relax();
cur_max_warp = check_tsc_warp(loop_timeout(cpu));
/*
* Store the maximum observed warp value for a potential retry:
*/
gbl_max_warp = max_warp;
/*
* Ok, we are done:
*/
atomic_inc(&stop_count);
/*
* Wait for the source CPU to print stuff:
*/
while (atomic_read(&stop_count) != cpus)
cpu_relax();
/*
* Reset it for the next sync test:
*/
atomic_set(&stop_count, 0);
/*
* Check the number of remaining test runs. If not zero, the test
* failed and a retry with adjusted TSC is possible. If zero the
* test was either successful or failed terminally.
*/
if (!atomic_read(&test_runs))
return;
/*
* If the warp value of this CPU is 0, then the other CPU
* observed time going backwards so this TSC was ahead and
* needs to move backwards.
*/
if (!cur_max_warp)
cur_max_warp = -gbl_max_warp;
/*
* Add the result to the previous adjustment value.
*
* The adjustement value is slightly off by the overhead of the
* sync mechanism (observed values are ~200 TSC cycles), but this
* really depends on CPU, node distance and frequency. So
* compensating for this is hard to get right. Experiments show
* that the warp is not longer detectable when the observed warp
* value is used. In the worst case the adjustment needs to go
* through a 3rd run for fine tuning.
*/
cur->adjusted += cur_max_warp;
pr_warn("TSC ADJUST compensate: CPU%u observed %lld warp. Adjust: %lld\n",
cpu, cur_max_warp, cur->adjusted);
wrmsrl(MSR_IA32_TSC_ADJUST, cur->adjusted);
goto retry;
}
#endif /* CONFIG_SMP */