linux/drivers/net/wireless/wl12xx/io.h
Luciano Coelho 0becb14ab4 wl12xx: move partition table definition to io.c
Up till now we only needed to access the partition table in boot.c.
But to add support for reading the MAC address from the FUSE in
testmode, we will have to change the partition in testmode.c.

Thus, we move the partition table to io.c and export it via io.h.  It
makes more sense to have it in the io part anyway.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15 08:38:28 +02:00

182 lines
5.1 KiB
C

/*
* This file is part of wl1271
*
* Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __IO_H__
#define __IO_H__
#include <linux/irqreturn.h>
#include "reg.h"
#define HW_ACCESS_MEMORY_MAX_RANGE 0x1FFC0
#define HW_PARTITION_REGISTERS_ADDR 0x1FFC0
#define HW_PART0_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR)
#define HW_PART0_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 4)
#define HW_PART1_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 8)
#define HW_PART1_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 12)
#define HW_PART2_SIZE_ADDR (HW_PARTITION_REGISTERS_ADDR + 16)
#define HW_PART2_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 20)
#define HW_PART3_START_ADDR (HW_PARTITION_REGISTERS_ADDR + 24)
#define HW_ACCESS_REGISTER_SIZE 4
#define HW_ACCESS_PRAM_MAX_RANGE 0x3c000
extern struct wl1271_partition_set wl12xx_part_table[PART_TABLE_LEN];
struct wl1271;
void wl1271_disable_interrupts(struct wl1271 *wl);
void wl1271_enable_interrupts(struct wl1271 *wl);
void wl1271_io_reset(struct wl1271 *wl);
void wl1271_io_init(struct wl1271 *wl);
/* Raw target IO, address is not translated */
static inline void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
wl->if_ops->write(wl->dev, addr, buf, len, fixed);
}
static inline void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
wl->if_ops->read(wl->dev, addr, buf, len, fixed);
}
static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
{
wl1271_raw_read(wl, addr, &wl->buffer_32,
sizeof(wl->buffer_32), false);
return le32_to_cpu(wl->buffer_32);
}
static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
{
wl->buffer_32 = cpu_to_le32(val);
wl1271_raw_write(wl, addr, &wl->buffer_32,
sizeof(wl->buffer_32), false);
}
/* Translated target IO */
static inline int wl1271_translate_addr(struct wl1271 *wl, int addr)
{
/*
* To translate, first check to which window of addresses the
* particular address belongs. Then subtract the starting address
* of that window from the address. Then, add offset of the
* translated region.
*
* The translated regions occur next to each other in physical device
* memory, so just add the sizes of the preceding address regions to
* get the offset to the new region.
*
* Currently, only the two first regions are addressed, and the
* assumption is that all addresses will fall into either of those
* two.
*/
if ((addr >= wl->part.reg.start) &&
(addr < wl->part.reg.start + wl->part.reg.size))
return addr - wl->part.reg.start + wl->part.mem.size;
else
return addr - wl->part.mem.start;
}
static inline void wl1271_read(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
int physical;
physical = wl1271_translate_addr(wl, addr);
wl1271_raw_read(wl, physical, buf, len, fixed);
}
static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
int physical;
physical = wl1271_translate_addr(wl, addr);
wl1271_raw_write(wl, physical, buf, len, fixed);
}
static inline void wl1271_read_hwaddr(struct wl1271 *wl, int hwaddr,
void *buf, size_t len, bool fixed)
{
int physical;
int addr;
/* Addresses are stored internally as addresses to 32 bytes blocks */
addr = hwaddr << 5;
physical = wl1271_translate_addr(wl, addr);
wl1271_raw_read(wl, physical, buf, len, fixed);
}
static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
{
return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
}
static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
{
wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
}
static inline void wl1271_power_off(struct wl1271 *wl)
{
wl->if_ops->power(wl->dev, false);
clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
}
static inline int wl1271_power_on(struct wl1271 *wl)
{
int ret = wl->if_ops->power(wl->dev, true);
if (ret == 0)
set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
return ret;
}
/* Top Register IO */
void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
int wl1271_set_partition(struct wl1271 *wl,
struct wl1271_partition_set *p);
bool wl1271_set_block_size(struct wl1271 *wl);
/* Functions from wl1271_main.c */
int wl1271_tx_dummy_packet(struct wl1271 *wl);
#endif