linux/drivers/pinctrl/sunxi/pinctrl-sunxi.h
Samuel Holland 0569af4811 pinctrl: sunxi: Add driver for Allwinner D1
This SoC contains a pinctrl with a new register layout. Use the variant
parameter to set the right register offsets. This pinctrl also increases
the number of functions per pin from 8 to 16, taking advantage of all 4
bits in the mux config field (so far, only functions 0-8 and 14-15 are
used). This increases the maximum possible number of functions.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220713025233.27248-7-samuel@sholland.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-18 11:39:33 +02:00

310 lines
7.2 KiB
C

/*
* Allwinner A1X SoCs pinctrl driver.
*
* Copyright (C) 2012 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __PINCTRL_SUNXI_H
#define __PINCTRL_SUNXI_H
#include <linux/kernel.h>
#include <linux/spinlock.h>
#define PA_BASE 0
#define PB_BASE 32
#define PC_BASE 64
#define PD_BASE 96
#define PE_BASE 128
#define PF_BASE 160
#define PG_BASE 192
#define PH_BASE 224
#define PI_BASE 256
#define PL_BASE 352
#define PM_BASE 384
#define PN_BASE 416
#define SUNXI_PINCTRL_PIN(bank, pin) \
PINCTRL_PIN(P ## bank ## _BASE + (pin), "P" #bank #pin)
#define SUNXI_PIN_NAME_MAX_LEN 5
#define BANK_MEM_SIZE 0x24
#define MUX_REGS_OFFSET 0x0
#define MUX_FIELD_WIDTH 4
#define DATA_REGS_OFFSET 0x10
#define DATA_FIELD_WIDTH 1
#define DLEVEL_REGS_OFFSET 0x14
#define DLEVEL_FIELD_WIDTH 2
#define PULL_REGS_OFFSET 0x1c
#define PULL_FIELD_WIDTH 2
#define D1_BANK_MEM_SIZE 0x30
#define D1_DLEVEL_FIELD_WIDTH 4
#define D1_PULL_REGS_OFFSET 0x24
#define PINS_PER_BANK 32
#define IRQ_PER_BANK 32
#define IRQ_CFG_REG 0x200
#define IRQ_CFG_IRQ_PER_REG 8
#define IRQ_CFG_IRQ_BITS 4
#define IRQ_CFG_IRQ_MASK ((1 << IRQ_CFG_IRQ_BITS) - 1)
#define IRQ_CTRL_REG 0x210
#define IRQ_CTRL_IRQ_PER_REG 32
#define IRQ_CTRL_IRQ_BITS 1
#define IRQ_CTRL_IRQ_MASK ((1 << IRQ_CTRL_IRQ_BITS) - 1)
#define IRQ_STATUS_REG 0x214
#define IRQ_STATUS_IRQ_PER_REG 32
#define IRQ_STATUS_IRQ_BITS 1
#define IRQ_STATUS_IRQ_MASK ((1 << IRQ_STATUS_IRQ_BITS) - 1)
#define IRQ_DEBOUNCE_REG 0x218
#define IRQ_MEM_SIZE 0x20
#define IRQ_EDGE_RISING 0x00
#define IRQ_EDGE_FALLING 0x01
#define IRQ_LEVEL_HIGH 0x02
#define IRQ_LEVEL_LOW 0x03
#define IRQ_EDGE_BOTH 0x04
#define GRP_CFG_REG 0x300
#define IO_BIAS_MASK GENMASK(3, 0)
#define SUN4I_FUNC_INPUT 0
#define SUN4I_FUNC_IRQ 6
#define PINCTRL_SUN5I_A10S BIT(1)
#define PINCTRL_SUN5I_A13 BIT(2)
#define PINCTRL_SUN5I_GR8 BIT(3)
#define PINCTRL_SUN6I_A31 BIT(4)
#define PINCTRL_SUN6I_A31S BIT(5)
#define PINCTRL_SUN4I_A10 BIT(6)
#define PINCTRL_SUN7I_A20 BIT(7)
#define PINCTRL_SUN8I_R40 BIT(8)
#define PINCTRL_SUN8I_V3 BIT(9)
#define PINCTRL_SUN8I_V3S BIT(10)
/* Variants below here have an updated register layout. */
#define PINCTRL_SUN20I_D1 BIT(11)
#define PIO_POW_MOD_SEL_REG 0x340
#define PIO_POW_MOD_CTL_REG 0x344
enum sunxi_desc_bias_voltage {
BIAS_VOLTAGE_NONE,
/*
* Bias voltage configuration is done through
* Pn_GRP_CONFIG registers, as seen on A80 SoC.
*/
BIAS_VOLTAGE_GRP_CONFIG,
/*
* Bias voltage is set through PIO_POW_MOD_SEL_REG
* register, as seen on H6 SoC, for example.
*/
BIAS_VOLTAGE_PIO_POW_MODE_SEL,
/*
* Bias voltage is set through PIO_POW_MOD_SEL_REG
* and PIO_POW_MOD_CTL_REG register, as seen on
* A100 and D1 SoC, for example.
*/
BIAS_VOLTAGE_PIO_POW_MODE_CTL,
};
struct sunxi_desc_function {
unsigned long variant;
const char *name;
u8 muxval;
u8 irqbank;
u8 irqnum;
};
struct sunxi_desc_pin {
struct pinctrl_pin_desc pin;
unsigned long variant;
struct sunxi_desc_function *functions;
};
struct sunxi_pinctrl_desc {
const struct sunxi_desc_pin *pins;
int npins;
unsigned pin_base;
unsigned irq_banks;
const unsigned int *irq_bank_map;
bool irq_read_needs_mux;
bool disable_strict_mode;
enum sunxi_desc_bias_voltage io_bias_cfg_variant;
};
struct sunxi_pinctrl_function {
const char *name;
const char **groups;
unsigned ngroups;
};
struct sunxi_pinctrl_group {
const char *name;
unsigned pin;
};
struct sunxi_pinctrl_regulator {
struct regulator *regulator;
refcount_t refcount;
};
struct sunxi_pinctrl {
void __iomem *membase;
struct gpio_chip *chip;
const struct sunxi_pinctrl_desc *desc;
struct device *dev;
struct sunxi_pinctrl_regulator regulators[9];
struct irq_domain *domain;
struct sunxi_pinctrl_function *functions;
unsigned nfunctions;
struct sunxi_pinctrl_group *groups;
unsigned ngroups;
int *irq;
unsigned *irq_array;
raw_spinlock_t lock;
struct pinctrl_dev *pctl_dev;
unsigned long variant;
u32 bank_mem_size;
u32 pull_regs_offset;
u32 dlevel_field_width;
};
#define SUNXI_PIN(_pin, ...) \
{ \
.pin = _pin, \
.functions = (struct sunxi_desc_function[]){ \
__VA_ARGS__, { } }, \
}
#define SUNXI_PIN_VARIANT(_pin, _variant, ...) \
{ \
.pin = _pin, \
.variant = _variant, \
.functions = (struct sunxi_desc_function[]){ \
__VA_ARGS__, { } }, \
}
#define SUNXI_FUNCTION(_val, _name) \
{ \
.name = _name, \
.muxval = _val, \
}
#define SUNXI_FUNCTION_VARIANT(_val, _name, _variant) \
{ \
.name = _name, \
.muxval = _val, \
.variant = _variant, \
}
#define SUNXI_FUNCTION_IRQ(_val, _irq) \
{ \
.name = "irq", \
.muxval = _val, \
.irqnum = _irq, \
}
#define SUNXI_FUNCTION_IRQ_BANK(_val, _bank, _irq) \
{ \
.name = "irq", \
.muxval = _val, \
.irqbank = _bank, \
.irqnum = _irq, \
}
static inline u32 sunxi_irq_hw_bank_num(const struct sunxi_pinctrl_desc *desc, u8 bank)
{
if (!desc->irq_bank_map)
return bank;
else
return desc->irq_bank_map[bank];
}
static inline u32 sunxi_irq_cfg_reg(const struct sunxi_pinctrl_desc *desc,
u16 irq)
{
u8 bank = irq / IRQ_PER_BANK;
u8 reg = (irq % IRQ_PER_BANK) / IRQ_CFG_IRQ_PER_REG * 0x04;
return IRQ_CFG_REG +
sunxi_irq_hw_bank_num(desc, bank) * IRQ_MEM_SIZE + reg;
}
static inline u32 sunxi_irq_cfg_offset(u16 irq)
{
u32 irq_num = irq % IRQ_CFG_IRQ_PER_REG;
return irq_num * IRQ_CFG_IRQ_BITS;
}
static inline u32 sunxi_irq_ctrl_reg_from_bank(const struct sunxi_pinctrl_desc *desc, u8 bank)
{
return IRQ_CTRL_REG + sunxi_irq_hw_bank_num(desc, bank) * IRQ_MEM_SIZE;
}
static inline u32 sunxi_irq_ctrl_reg(const struct sunxi_pinctrl_desc *desc,
u16 irq)
{
u8 bank = irq / IRQ_PER_BANK;
return sunxi_irq_ctrl_reg_from_bank(desc, bank);
}
static inline u32 sunxi_irq_ctrl_offset(u16 irq)
{
u32 irq_num = irq % IRQ_CTRL_IRQ_PER_REG;
return irq_num * IRQ_CTRL_IRQ_BITS;
}
static inline u32 sunxi_irq_debounce_reg_from_bank(const struct sunxi_pinctrl_desc *desc, u8 bank)
{
return IRQ_DEBOUNCE_REG +
sunxi_irq_hw_bank_num(desc, bank) * IRQ_MEM_SIZE;
}
static inline u32 sunxi_irq_status_reg_from_bank(const struct sunxi_pinctrl_desc *desc, u8 bank)
{
return IRQ_STATUS_REG +
sunxi_irq_hw_bank_num(desc, bank) * IRQ_MEM_SIZE;
}
static inline u32 sunxi_irq_status_reg(const struct sunxi_pinctrl_desc *desc,
u16 irq)
{
u8 bank = irq / IRQ_PER_BANK;
return sunxi_irq_status_reg_from_bank(desc, bank);
}
static inline u32 sunxi_irq_status_offset(u16 irq)
{
u32 irq_num = irq % IRQ_STATUS_IRQ_PER_REG;
return irq_num * IRQ_STATUS_IRQ_BITS;
}
static inline u32 sunxi_grp_config_reg(u16 pin)
{
u8 bank = pin / PINS_PER_BANK;
return GRP_CFG_REG + bank * 0x4;
}
int sunxi_pinctrl_init_with_variant(struct platform_device *pdev,
const struct sunxi_pinctrl_desc *desc,
unsigned long variant);
#define sunxi_pinctrl_init(_dev, _desc) \
sunxi_pinctrl_init_with_variant(_dev, _desc, 0)
#endif /* __PINCTRL_SUNXI_H */