mirror of
https://github.com/torvalds/linux.git
synced 2024-12-30 14:52:05 +00:00
0fa74a4be4
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
710 lines
18 KiB
C
710 lines
18 KiB
C
/*
|
|
* Ethernet driver for the WIZnet W5300 chip.
|
|
*
|
|
* Copyright (C) 2008-2009 WIZnet Co.,Ltd.
|
|
* Copyright (C) 2011 Taehun Kim <kth3321 <at> gmail.com>
|
|
* Copyright (C) 2012 Mike Sinkovsky <msink@permonline.ru>
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kconfig.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/wiznet.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#define DRV_NAME "w5300"
|
|
#define DRV_VERSION "2012-04-04"
|
|
|
|
MODULE_DESCRIPTION("WIZnet W5300 Ethernet driver v"DRV_VERSION);
|
|
MODULE_AUTHOR("Mike Sinkovsky <msink@permonline.ru>");
|
|
MODULE_ALIAS("platform:"DRV_NAME);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*
|
|
* Registers
|
|
*/
|
|
#define W5300_MR 0x0000 /* Mode Register */
|
|
#define MR_DBW (1 << 15) /* Data bus width */
|
|
#define MR_MPF (1 << 14) /* Mac layer pause frame */
|
|
#define MR_WDF(n) (((n)&7)<<11) /* Write data fetch time */
|
|
#define MR_RDH (1 << 10) /* Read data hold time */
|
|
#define MR_FS (1 << 8) /* FIFO swap */
|
|
#define MR_RST (1 << 7) /* S/W reset */
|
|
#define MR_PB (1 << 4) /* Ping block */
|
|
#define MR_DBS (1 << 2) /* Data bus swap */
|
|
#define MR_IND (1 << 0) /* Indirect mode */
|
|
#define W5300_IR 0x0002 /* Interrupt Register */
|
|
#define W5300_IMR 0x0004 /* Interrupt Mask Register */
|
|
#define IR_S0 0x0001 /* S0 interrupt */
|
|
#define W5300_SHARL 0x0008 /* Source MAC address (0123) */
|
|
#define W5300_SHARH 0x000c /* Source MAC address (45) */
|
|
#define W5300_TMSRL 0x0020 /* Transmit Memory Size (0123) */
|
|
#define W5300_TMSRH 0x0024 /* Transmit Memory Size (4567) */
|
|
#define W5300_RMSRL 0x0028 /* Receive Memory Size (0123) */
|
|
#define W5300_RMSRH 0x002c /* Receive Memory Size (4567) */
|
|
#define W5300_MTYPE 0x0030 /* Memory Type */
|
|
#define W5300_IDR 0x00fe /* Chip ID register */
|
|
#define IDR_W5300 0x5300 /* =0x5300 for WIZnet W5300 */
|
|
#define W5300_S0_MR 0x0200 /* S0 Mode Register */
|
|
#define S0_MR_CLOSED 0x0000 /* Close mode */
|
|
#define S0_MR_MACRAW 0x0004 /* MAC RAW mode (promiscuous) */
|
|
#define S0_MR_MACRAW_MF 0x0044 /* MAC RAW mode (filtered) */
|
|
#define W5300_S0_CR 0x0202 /* S0 Command Register */
|
|
#define S0_CR_OPEN 0x0001 /* OPEN command */
|
|
#define S0_CR_CLOSE 0x0010 /* CLOSE command */
|
|
#define S0_CR_SEND 0x0020 /* SEND command */
|
|
#define S0_CR_RECV 0x0040 /* RECV command */
|
|
#define W5300_S0_IMR 0x0204 /* S0 Interrupt Mask Register */
|
|
#define W5300_S0_IR 0x0206 /* S0 Interrupt Register */
|
|
#define S0_IR_RECV 0x0004 /* Receive interrupt */
|
|
#define S0_IR_SENDOK 0x0010 /* Send OK interrupt */
|
|
#define W5300_S0_SSR 0x0208 /* S0 Socket Status Register */
|
|
#define W5300_S0_TX_WRSR 0x0220 /* S0 TX Write Size Register */
|
|
#define W5300_S0_TX_FSR 0x0224 /* S0 TX Free Size Register */
|
|
#define W5300_S0_RX_RSR 0x0228 /* S0 Received data Size */
|
|
#define W5300_S0_TX_FIFO 0x022e /* S0 Transmit FIFO */
|
|
#define W5300_S0_RX_FIFO 0x0230 /* S0 Receive FIFO */
|
|
#define W5300_REGS_LEN 0x0400
|
|
|
|
/*
|
|
* Device driver private data structure
|
|
*/
|
|
struct w5300_priv {
|
|
void __iomem *base;
|
|
spinlock_t reg_lock;
|
|
bool indirect;
|
|
u16 (*read) (struct w5300_priv *priv, u16 addr);
|
|
void (*write)(struct w5300_priv *priv, u16 addr, u16 data);
|
|
int irq;
|
|
int link_irq;
|
|
int link_gpio;
|
|
|
|
struct napi_struct napi;
|
|
struct net_device *ndev;
|
|
bool promisc;
|
|
u32 msg_enable;
|
|
};
|
|
|
|
/************************************************************************
|
|
*
|
|
* Lowlevel I/O functions
|
|
*
|
|
***********************************************************************/
|
|
|
|
/*
|
|
* In direct address mode host system can directly access W5300 registers
|
|
* after mapping to Memory-Mapped I/O space.
|
|
*
|
|
* 0x400 bytes are required for memory space.
|
|
*/
|
|
static inline u16 w5300_read_direct(struct w5300_priv *priv, u16 addr)
|
|
{
|
|
return ioread16(priv->base + (addr << CONFIG_WIZNET_BUS_SHIFT));
|
|
}
|
|
|
|
static inline void w5300_write_direct(struct w5300_priv *priv,
|
|
u16 addr, u16 data)
|
|
{
|
|
iowrite16(data, priv->base + (addr << CONFIG_WIZNET_BUS_SHIFT));
|
|
}
|
|
|
|
/*
|
|
* In indirect address mode host system indirectly accesses registers by
|
|
* using Indirect Mode Address Register (IDM_AR) and Indirect Mode Data
|
|
* Register (IDM_DR), which are directly mapped to Memory-Mapped I/O space.
|
|
* Mode Register (MR) is directly accessible.
|
|
*
|
|
* Only 0x06 bytes are required for memory space.
|
|
*/
|
|
#define W5300_IDM_AR 0x0002 /* Indirect Mode Address */
|
|
#define W5300_IDM_DR 0x0004 /* Indirect Mode Data */
|
|
|
|
static u16 w5300_read_indirect(struct w5300_priv *priv, u16 addr)
|
|
{
|
|
unsigned long flags;
|
|
u16 data;
|
|
|
|
spin_lock_irqsave(&priv->reg_lock, flags);
|
|
w5300_write_direct(priv, W5300_IDM_AR, addr);
|
|
mmiowb();
|
|
data = w5300_read_direct(priv, W5300_IDM_DR);
|
|
spin_unlock_irqrestore(&priv->reg_lock, flags);
|
|
|
|
return data;
|
|
}
|
|
|
|
static void w5300_write_indirect(struct w5300_priv *priv, u16 addr, u16 data)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->reg_lock, flags);
|
|
w5300_write_direct(priv, W5300_IDM_AR, addr);
|
|
mmiowb();
|
|
w5300_write_direct(priv, W5300_IDM_DR, data);
|
|
mmiowb();
|
|
spin_unlock_irqrestore(&priv->reg_lock, flags);
|
|
}
|
|
|
|
#if defined(CONFIG_WIZNET_BUS_DIRECT)
|
|
#define w5300_read w5300_read_direct
|
|
#define w5300_write w5300_write_direct
|
|
|
|
#elif defined(CONFIG_WIZNET_BUS_INDIRECT)
|
|
#define w5300_read w5300_read_indirect
|
|
#define w5300_write w5300_write_indirect
|
|
|
|
#else /* CONFIG_WIZNET_BUS_ANY */
|
|
#define w5300_read priv->read
|
|
#define w5300_write priv->write
|
|
#endif
|
|
|
|
static u32 w5300_read32(struct w5300_priv *priv, u16 addr)
|
|
{
|
|
u32 data;
|
|
data = w5300_read(priv, addr) << 16;
|
|
data |= w5300_read(priv, addr + 2);
|
|
return data;
|
|
}
|
|
|
|
static void w5300_write32(struct w5300_priv *priv, u16 addr, u32 data)
|
|
{
|
|
w5300_write(priv, addr, data >> 16);
|
|
w5300_write(priv, addr + 2, data);
|
|
}
|
|
|
|
static int w5300_command(struct w5300_priv *priv, u16 cmd)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(100);
|
|
|
|
w5300_write(priv, W5300_S0_CR, cmd);
|
|
mmiowb();
|
|
|
|
while (w5300_read(priv, W5300_S0_CR) != 0) {
|
|
if (time_after(jiffies, timeout))
|
|
return -EIO;
|
|
cpu_relax();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void w5300_read_frame(struct w5300_priv *priv, u8 *buf, int len)
|
|
{
|
|
u16 fifo;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i += 2) {
|
|
fifo = w5300_read(priv, W5300_S0_RX_FIFO);
|
|
*buf++ = fifo >> 8;
|
|
*buf++ = fifo;
|
|
}
|
|
fifo = w5300_read(priv, W5300_S0_RX_FIFO);
|
|
fifo = w5300_read(priv, W5300_S0_RX_FIFO);
|
|
}
|
|
|
|
static void w5300_write_frame(struct w5300_priv *priv, u8 *buf, int len)
|
|
{
|
|
u16 fifo;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i += 2) {
|
|
fifo = *buf++ << 8;
|
|
fifo |= *buf++;
|
|
w5300_write(priv, W5300_S0_TX_FIFO, fifo);
|
|
}
|
|
w5300_write32(priv, W5300_S0_TX_WRSR, len);
|
|
}
|
|
|
|
static void w5300_write_macaddr(struct w5300_priv *priv)
|
|
{
|
|
struct net_device *ndev = priv->ndev;
|
|
w5300_write32(priv, W5300_SHARL,
|
|
ndev->dev_addr[0] << 24 |
|
|
ndev->dev_addr[1] << 16 |
|
|
ndev->dev_addr[2] << 8 |
|
|
ndev->dev_addr[3]);
|
|
w5300_write(priv, W5300_SHARH,
|
|
ndev->dev_addr[4] << 8 |
|
|
ndev->dev_addr[5]);
|
|
mmiowb();
|
|
}
|
|
|
|
static void w5300_hw_reset(struct w5300_priv *priv)
|
|
{
|
|
w5300_write_direct(priv, W5300_MR, MR_RST);
|
|
mmiowb();
|
|
mdelay(5);
|
|
w5300_write_direct(priv, W5300_MR, priv->indirect ?
|
|
MR_WDF(7) | MR_PB | MR_IND :
|
|
MR_WDF(7) | MR_PB);
|
|
mmiowb();
|
|
w5300_write(priv, W5300_IMR, 0);
|
|
w5300_write_macaddr(priv);
|
|
|
|
/* Configure 128K of internal memory
|
|
* as 64K RX fifo and 64K TX fifo
|
|
*/
|
|
w5300_write32(priv, W5300_RMSRL, 64 << 24);
|
|
w5300_write32(priv, W5300_RMSRH, 0);
|
|
w5300_write32(priv, W5300_TMSRL, 64 << 24);
|
|
w5300_write32(priv, W5300_TMSRH, 0);
|
|
w5300_write(priv, W5300_MTYPE, 0x00ff);
|
|
mmiowb();
|
|
}
|
|
|
|
static void w5300_hw_start(struct w5300_priv *priv)
|
|
{
|
|
w5300_write(priv, W5300_S0_MR, priv->promisc ?
|
|
S0_MR_MACRAW : S0_MR_MACRAW_MF);
|
|
mmiowb();
|
|
w5300_command(priv, S0_CR_OPEN);
|
|
w5300_write(priv, W5300_S0_IMR, S0_IR_RECV | S0_IR_SENDOK);
|
|
w5300_write(priv, W5300_IMR, IR_S0);
|
|
mmiowb();
|
|
}
|
|
|
|
static void w5300_hw_close(struct w5300_priv *priv)
|
|
{
|
|
w5300_write(priv, W5300_IMR, 0);
|
|
mmiowb();
|
|
w5300_command(priv, S0_CR_CLOSE);
|
|
}
|
|
|
|
/***********************************************************************
|
|
*
|
|
* Device driver functions / callbacks
|
|
*
|
|
***********************************************************************/
|
|
|
|
static void w5300_get_drvinfo(struct net_device *ndev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
|
|
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
|
|
strlcpy(info->bus_info, dev_name(ndev->dev.parent),
|
|
sizeof(info->bus_info));
|
|
}
|
|
|
|
static u32 w5300_get_link(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
if (gpio_is_valid(priv->link_gpio))
|
|
return !!gpio_get_value(priv->link_gpio);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static u32 w5300_get_msglevel(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
return priv->msg_enable;
|
|
}
|
|
|
|
static void w5300_set_msglevel(struct net_device *ndev, u32 value)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
priv->msg_enable = value;
|
|
}
|
|
|
|
static int w5300_get_regs_len(struct net_device *ndev)
|
|
{
|
|
return W5300_REGS_LEN;
|
|
}
|
|
|
|
static void w5300_get_regs(struct net_device *ndev,
|
|
struct ethtool_regs *regs, void *_buf)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
u8 *buf = _buf;
|
|
u16 addr;
|
|
u16 data;
|
|
|
|
regs->version = 1;
|
|
for (addr = 0; addr < W5300_REGS_LEN; addr += 2) {
|
|
switch (addr & 0x23f) {
|
|
case W5300_S0_TX_FIFO: /* cannot read TX_FIFO */
|
|
case W5300_S0_RX_FIFO: /* cannot read RX_FIFO */
|
|
data = 0xffff;
|
|
break;
|
|
default:
|
|
data = w5300_read(priv, addr);
|
|
break;
|
|
}
|
|
*buf++ = data >> 8;
|
|
*buf++ = data;
|
|
}
|
|
}
|
|
|
|
static void w5300_tx_timeout(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
netif_stop_queue(ndev);
|
|
w5300_hw_reset(priv);
|
|
w5300_hw_start(priv);
|
|
ndev->stats.tx_errors++;
|
|
ndev->trans_start = jiffies;
|
|
netif_wake_queue(ndev);
|
|
}
|
|
|
|
static int w5300_start_tx(struct sk_buff *skb, struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
netif_stop_queue(ndev);
|
|
|
|
w5300_write_frame(priv, skb->data, skb->len);
|
|
mmiowb();
|
|
ndev->stats.tx_packets++;
|
|
ndev->stats.tx_bytes += skb->len;
|
|
dev_kfree_skb(skb);
|
|
netif_dbg(priv, tx_queued, ndev, "tx queued\n");
|
|
|
|
w5300_command(priv, S0_CR_SEND);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int w5300_napi_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct w5300_priv *priv = container_of(napi, struct w5300_priv, napi);
|
|
struct net_device *ndev = priv->ndev;
|
|
struct sk_buff *skb;
|
|
int rx_count;
|
|
u16 rx_len;
|
|
|
|
for (rx_count = 0; rx_count < budget; rx_count++) {
|
|
u32 rx_fifo_len = w5300_read32(priv, W5300_S0_RX_RSR);
|
|
if (rx_fifo_len == 0)
|
|
break;
|
|
|
|
rx_len = w5300_read(priv, W5300_S0_RX_FIFO);
|
|
|
|
skb = netdev_alloc_skb_ip_align(ndev, roundup(rx_len, 2));
|
|
if (unlikely(!skb)) {
|
|
u32 i;
|
|
for (i = 0; i < rx_fifo_len; i += 2)
|
|
w5300_read(priv, W5300_S0_RX_FIFO);
|
|
ndev->stats.rx_dropped++;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
skb_put(skb, rx_len);
|
|
w5300_read_frame(priv, skb->data, rx_len);
|
|
skb->protocol = eth_type_trans(skb, ndev);
|
|
|
|
netif_receive_skb(skb);
|
|
ndev->stats.rx_packets++;
|
|
ndev->stats.rx_bytes += rx_len;
|
|
}
|
|
|
|
if (rx_count < budget) {
|
|
napi_complete(napi);
|
|
w5300_write(priv, W5300_IMR, IR_S0);
|
|
mmiowb();
|
|
}
|
|
|
|
return rx_count;
|
|
}
|
|
|
|
static irqreturn_t w5300_interrupt(int irq, void *ndev_instance)
|
|
{
|
|
struct net_device *ndev = ndev_instance;
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
int ir = w5300_read(priv, W5300_S0_IR);
|
|
if (!ir)
|
|
return IRQ_NONE;
|
|
w5300_write(priv, W5300_S0_IR, ir);
|
|
mmiowb();
|
|
|
|
if (ir & S0_IR_SENDOK) {
|
|
netif_dbg(priv, tx_done, ndev, "tx done\n");
|
|
netif_wake_queue(ndev);
|
|
}
|
|
|
|
if (ir & S0_IR_RECV) {
|
|
if (napi_schedule_prep(&priv->napi)) {
|
|
w5300_write(priv, W5300_IMR, 0);
|
|
mmiowb();
|
|
__napi_schedule(&priv->napi);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t w5300_detect_link(int irq, void *ndev_instance)
|
|
{
|
|
struct net_device *ndev = ndev_instance;
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
if (netif_running(ndev)) {
|
|
if (gpio_get_value(priv->link_gpio) != 0) {
|
|
netif_info(priv, link, ndev, "link is up\n");
|
|
netif_carrier_on(ndev);
|
|
} else {
|
|
netif_info(priv, link, ndev, "link is down\n");
|
|
netif_carrier_off(ndev);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void w5300_set_rx_mode(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
bool set_promisc = (ndev->flags & IFF_PROMISC) != 0;
|
|
|
|
if (priv->promisc != set_promisc) {
|
|
priv->promisc = set_promisc;
|
|
w5300_hw_start(priv);
|
|
}
|
|
}
|
|
|
|
static int w5300_set_macaddr(struct net_device *ndev, void *addr)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
struct sockaddr *sock_addr = addr;
|
|
|
|
if (!is_valid_ether_addr(sock_addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
memcpy(ndev->dev_addr, sock_addr->sa_data, ETH_ALEN);
|
|
w5300_write_macaddr(priv);
|
|
return 0;
|
|
}
|
|
|
|
static int w5300_open(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
netif_info(priv, ifup, ndev, "enabling\n");
|
|
w5300_hw_start(priv);
|
|
napi_enable(&priv->napi);
|
|
netif_start_queue(ndev);
|
|
if (!gpio_is_valid(priv->link_gpio) ||
|
|
gpio_get_value(priv->link_gpio) != 0)
|
|
netif_carrier_on(ndev);
|
|
return 0;
|
|
}
|
|
|
|
static int w5300_stop(struct net_device *ndev)
|
|
{
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
netif_info(priv, ifdown, ndev, "shutting down\n");
|
|
w5300_hw_close(priv);
|
|
netif_carrier_off(ndev);
|
|
netif_stop_queue(ndev);
|
|
napi_disable(&priv->napi);
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops w5300_ethtool_ops = {
|
|
.get_drvinfo = w5300_get_drvinfo,
|
|
.get_msglevel = w5300_get_msglevel,
|
|
.set_msglevel = w5300_set_msglevel,
|
|
.get_link = w5300_get_link,
|
|
.get_regs_len = w5300_get_regs_len,
|
|
.get_regs = w5300_get_regs,
|
|
};
|
|
|
|
static const struct net_device_ops w5300_netdev_ops = {
|
|
.ndo_open = w5300_open,
|
|
.ndo_stop = w5300_stop,
|
|
.ndo_start_xmit = w5300_start_tx,
|
|
.ndo_tx_timeout = w5300_tx_timeout,
|
|
.ndo_set_rx_mode = w5300_set_rx_mode,
|
|
.ndo_set_mac_address = w5300_set_macaddr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
};
|
|
|
|
static int w5300_hw_probe(struct platform_device *pdev)
|
|
{
|
|
struct wiznet_platform_data *data = dev_get_platdata(&pdev->dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
const char *name = netdev_name(ndev);
|
|
struct resource *mem;
|
|
int mem_size;
|
|
int irq;
|
|
int ret;
|
|
|
|
if (data && is_valid_ether_addr(data->mac_addr)) {
|
|
memcpy(ndev->dev_addr, data->mac_addr, ETH_ALEN);
|
|
} else {
|
|
eth_hw_addr_random(ndev);
|
|
}
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->base = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
mem_size = resource_size(mem);
|
|
|
|
spin_lock_init(&priv->reg_lock);
|
|
priv->indirect = mem_size < W5300_BUS_DIRECT_SIZE;
|
|
if (priv->indirect) {
|
|
priv->read = w5300_read_indirect;
|
|
priv->write = w5300_write_indirect;
|
|
} else {
|
|
priv->read = w5300_read_direct;
|
|
priv->write = w5300_write_direct;
|
|
}
|
|
|
|
w5300_hw_reset(priv);
|
|
if (w5300_read(priv, W5300_IDR) != IDR_W5300)
|
|
return -ENODEV;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
ret = request_irq(irq, w5300_interrupt,
|
|
IRQ_TYPE_LEVEL_LOW, name, ndev);
|
|
if (ret < 0)
|
|
return ret;
|
|
priv->irq = irq;
|
|
|
|
priv->link_gpio = data ? data->link_gpio : -EINVAL;
|
|
if (gpio_is_valid(priv->link_gpio)) {
|
|
char *link_name = devm_kzalloc(&pdev->dev, 16, GFP_KERNEL);
|
|
if (!link_name)
|
|
return -ENOMEM;
|
|
snprintf(link_name, 16, "%s-link", name);
|
|
priv->link_irq = gpio_to_irq(priv->link_gpio);
|
|
if (request_any_context_irq(priv->link_irq, w5300_detect_link,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
link_name, priv->ndev) < 0)
|
|
priv->link_gpio = -EINVAL;
|
|
}
|
|
|
|
netdev_info(ndev, "at 0x%llx irq %d\n", (u64)mem->start, irq);
|
|
return 0;
|
|
}
|
|
|
|
static int w5300_probe(struct platform_device *pdev)
|
|
{
|
|
struct w5300_priv *priv;
|
|
struct net_device *ndev;
|
|
int err;
|
|
|
|
ndev = alloc_etherdev(sizeof(*priv));
|
|
if (!ndev)
|
|
return -ENOMEM;
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
platform_set_drvdata(pdev, ndev);
|
|
priv = netdev_priv(ndev);
|
|
priv->ndev = ndev;
|
|
|
|
ndev->netdev_ops = &w5300_netdev_ops;
|
|
ndev->ethtool_ops = &w5300_ethtool_ops;
|
|
ndev->watchdog_timeo = HZ;
|
|
netif_napi_add(ndev, &priv->napi, w5300_napi_poll, 16);
|
|
|
|
/* This chip doesn't support VLAN packets with normal MTU,
|
|
* so disable VLAN for this device.
|
|
*/
|
|
ndev->features |= NETIF_F_VLAN_CHALLENGED;
|
|
|
|
err = register_netdev(ndev);
|
|
if (err < 0)
|
|
goto err_register;
|
|
|
|
err = w5300_hw_probe(pdev);
|
|
if (err < 0)
|
|
goto err_hw_probe;
|
|
|
|
return 0;
|
|
|
|
err_hw_probe:
|
|
unregister_netdev(ndev);
|
|
err_register:
|
|
free_netdev(ndev);
|
|
return err;
|
|
}
|
|
|
|
static int w5300_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
w5300_hw_reset(priv);
|
|
free_irq(priv->irq, ndev);
|
|
if (gpio_is_valid(priv->link_gpio))
|
|
free_irq(priv->link_irq, ndev);
|
|
|
|
unregister_netdev(ndev);
|
|
free_netdev(ndev);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int w5300_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
if (netif_running(ndev)) {
|
|
netif_carrier_off(ndev);
|
|
netif_device_detach(ndev);
|
|
|
|
w5300_hw_close(priv);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int w5300_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct w5300_priv *priv = netdev_priv(ndev);
|
|
|
|
if (!netif_running(ndev)) {
|
|
w5300_hw_reset(priv);
|
|
w5300_hw_start(priv);
|
|
|
|
netif_device_attach(ndev);
|
|
if (!gpio_is_valid(priv->link_gpio) ||
|
|
gpio_get_value(priv->link_gpio) != 0)
|
|
netif_carrier_on(ndev);
|
|
}
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(w5300_pm_ops, w5300_suspend, w5300_resume);
|
|
|
|
static struct platform_driver w5300_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.pm = &w5300_pm_ops,
|
|
},
|
|
.probe = w5300_probe,
|
|
.remove = w5300_remove,
|
|
};
|
|
|
|
module_platform_driver(w5300_driver);
|