Hans Verkuil cf9afb1daf [media] adv7604: restart STDI once if format is not found ... The STDI block may measure wrong values, especially for lcvs and lcf. If the driver can not find any valid timing, the STDI block is restarted to measure the video timings again. The function will return an error, but the restart of STDI will generate a new STDI interrupt and the format detection process will restart. Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>		2012-11-21 18:12:20 -02:00
..
cx25840	[media] drivers/media: Remove unnecessary semicolon	2012-10-07 09:15:18 -03:00
m5mols	[media] m5mols: Add missing #include <linux/sizes.h>	2012-10-10 08:17:16 -03:00
smiapp	[media] smiapp: Provide module identification information through sysfs	2012-09-26 17:43:54 -03:00
soc_camera	[media] ov2640: select sensor register bank before applying h/v-flip settings	2012-10-06 09:21:27 -03:00
ad9389b.c	[media] ad9389b: driver for the Analog Devices AD9389B video encoder	2012-09-13 16:15:36 -03:00
adp1653.c
adv7170.c
adv7175.c
adv7180.c
adv7183_regs.h
adv7183.c
adv7343_regs.h
adv7343.c
adv7393_regs.h
adv7393.c
adv7604.c	[media] adv7604: restart STDI once if format is not found	2012-11-21 18:12:20 -02:00
ak881x.c
aptina-pll.c
aptina-pll.h
as3645a.c
bt819.c
bt856.c
bt866.c
btcx-risc.c
btcx-risc.h
cs53l32a.c
cs5345.c
cx2341x.c
ir-kbd-i2c.c
Kconfig	[media] Add v4l2 subdev driver for S5K4ECGX sensor	2012-09-26 17:32:54 -03:00
ks0127.c	[media] ks0127: convert struct i2c_msg initialization to C99 format	2012-09-27 07:38:40 -03:00
ks0127.h
m52790.c
Makefile	[media] Add v4l2 subdev driver for S5K4ECGX sensor	2012-09-26 17:32:54 -03:00
msp3400-driver.c	[media] msp3400: convert struct i2c_msg initialization to C99 format	2012-09-27 07:39:31 -03:00
msp3400-driver.h
msp3400-kthreads.c
mt9m032.c	[media] mt9m032.c: introduce missing initialization	2012-09-14 11:10:59 -03:00
mt9p031.c	[media] media: mt9p031/mt9t001/mt9v032: use V4L2_CID_TEST_PATTERN for test pattern control	2012-10-05 21:49:32 -03:00
mt9t001.c	[media] media: mt9p031/mt9t001/mt9v032: use V4L2_CID_TEST_PATTERN for test pattern control	2012-10-05 21:49:32 -03:00
mt9v011.c
mt9v032.c	[media] media: mt9p031/mt9t001/mt9v032: use V4L2_CID_TEST_PATTERN for test pattern control	2012-10-05 21:49:32 -03:00
noon010pc30.c
ov7670.c
s5k4ecgx.c	[media] Add v4l2 subdev driver for S5K4ECGX sensor	2012-09-26 17:32:54 -03:00
s5k6aa.c	[media] s5k6aa: Fix possible NULL pointer dereference	2012-10-02 14:01:30 -03:00
saa711x_regs.h
saa717x.c
saa6588.c
saa7110.c
saa7115.c	[media] sliced vbi: subdevs shouldn't clear the full v4l2_sliced_vbi_format struct	2012-10-01 17:12:51 -03:00
saa7127.c	[media] sliced vbi: subdevs shouldn't clear the full v4l2_sliced_vbi_format struct	2012-10-01 17:12:51 -03:00
saa7185.c
saa7191.c
saa7191.h
smiapp-pll.c
smiapp-pll.h
sr030pc30.c
tcm825x.c
tcm825x.h
tda7432.c
tda9840.c
tea6415c.c	[media] drivers/media/i2c/tea6415c.c: removes unnecessary semicolon	2012-09-23 17:04:38 -03:00
tea6415c.h
tea6420.c
tea6420.h
ths7303.c	[media] ths7303: enable THS7303 for HD modes	2012-10-05 14:27:47 -03:00
tlv320aic23b.c
tvaudio.c	[media] tvaudio: convert struct i2c_msg initialization to C99 format	2012-09-27 07:38:49 -03:00
tveeprom.c
tvp514x_regs.h
tvp514x.c	[media] tvp514x: s_routing should just change routing, not try to detect a signal	2012-10-05 22:10:38 -03:00
tvp5150_reg.h
tvp5150.c	[media] sliced vbi: subdevs shouldn't clear the full v4l2_sliced_vbi_format struct	2012-10-01 17:12:51 -03:00
tvp7002_reg.h
tvp7002.c
upd64031a.c
upd64083.c
vp27smpx.c
vpx3220.c
vs6624_regs.h
vs6624.c
wm8739.c
wm8775.c