linux/security/selinux/netport.c
Stephen Smalley 6c5a682e64 selinux: clean up selinux_enabled/disabled/enforcing_boot
Rename selinux_enabled to selinux_enabled_boot to make it clear that
it only reflects whether SELinux was enabled at boot.  Replace the
references to it in the MAC_STATUS audit log in sel_write_enforce()
with hardcoded "1" values because this code is only reachable if SELinux
is enabled and does not change its value, and update the corresponding
MAC_STATUS audit log in sel_write_disable().  Stop clearing
selinux_enabled in selinux_disable() since it is not used outside of
initialization code that runs before selinux_disable() can be reached.
Mark both selinux_enabled_boot and selinux_enforcing_boot as __initdata
since they are only used in initialization code.

Wrap the disabled field in the struct selinux_state with
CONFIG_SECURITY_SELINUX_DISABLE since it is only used for
runtime disable.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-12-18 21:22:46 -05:00

240 lines
5.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Network port table
*
* SELinux must keep a mapping of network ports to labels/SIDs. This
* mapping is maintained as part of the normal policy but a fast cache is
* needed to reduce the lookup overhead.
*
* Author: Paul Moore <paul@paul-moore.com>
*
* This code is heavily based on the "netif" concept originally developed by
* James Morris <jmorris@redhat.com>
* (see security/selinux/netif.c for more information)
*/
/*
* (c) Copyright Hewlett-Packard Development Company, L.P., 2008
*/
#include <linux/types.h>
#include <linux/rcupdate.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <net/ip.h>
#include <net/ipv6.h>
#include "netport.h"
#include "objsec.h"
#define SEL_NETPORT_HASH_SIZE 256
#define SEL_NETPORT_HASH_BKT_LIMIT 16
struct sel_netport_bkt {
int size;
struct list_head list;
};
struct sel_netport {
struct netport_security_struct psec;
struct list_head list;
struct rcu_head rcu;
};
/* NOTE: we are using a combined hash table for both IPv4 and IPv6, the reason
* for this is that I suspect most users will not make heavy use of both
* address families at the same time so one table will usually end up wasted,
* if this becomes a problem we can always add a hash table for each address
* family later */
static LIST_HEAD(sel_netport_list);
static DEFINE_SPINLOCK(sel_netport_lock);
static struct sel_netport_bkt sel_netport_hash[SEL_NETPORT_HASH_SIZE];
/**
* sel_netport_hashfn - Hashing function for the port table
* @pnum: port number
*
* Description:
* This is the hashing function for the port table, it returns the bucket
* number for the given port.
*
*/
static unsigned int sel_netport_hashfn(u16 pnum)
{
return (pnum & (SEL_NETPORT_HASH_SIZE - 1));
}
/**
* sel_netport_find - Search for a port record
* @protocol: protocol
* @port: pnum
*
* Description:
* Search the network port table and return the matching record. If an entry
* can not be found in the table return NULL.
*
*/
static struct sel_netport *sel_netport_find(u8 protocol, u16 pnum)
{
unsigned int idx;
struct sel_netport *port;
idx = sel_netport_hashfn(pnum);
list_for_each_entry_rcu(port, &sel_netport_hash[idx].list, list)
if (port->psec.port == pnum && port->psec.protocol == protocol)
return port;
return NULL;
}
/**
* sel_netport_insert - Insert a new port into the table
* @port: the new port record
*
* Description:
* Add a new port record to the network address hash table.
*
*/
static void sel_netport_insert(struct sel_netport *port)
{
unsigned int idx;
/* we need to impose a limit on the growth of the hash table so check
* this bucket to make sure it is within the specified bounds */
idx = sel_netport_hashfn(port->psec.port);
list_add_rcu(&port->list, &sel_netport_hash[idx].list);
if (sel_netport_hash[idx].size == SEL_NETPORT_HASH_BKT_LIMIT) {
struct sel_netport *tail;
tail = list_entry(
rcu_dereference_protected(
sel_netport_hash[idx].list.prev,
lockdep_is_held(&sel_netport_lock)),
struct sel_netport, list);
list_del_rcu(&tail->list);
kfree_rcu(tail, rcu);
} else
sel_netport_hash[idx].size++;
}
/**
* sel_netport_sid_slow - Lookup the SID of a network address using the policy
* @protocol: protocol
* @pnum: port
* @sid: port SID
*
* Description:
* This function determines the SID of a network port by quering the security
* policy. The result is added to the network port table to speedup future
* queries. Returns zero on success, negative values on failure.
*
*/
static int sel_netport_sid_slow(u8 protocol, u16 pnum, u32 *sid)
{
int ret;
struct sel_netport *port;
struct sel_netport *new;
spin_lock_bh(&sel_netport_lock);
port = sel_netport_find(protocol, pnum);
if (port != NULL) {
*sid = port->psec.sid;
spin_unlock_bh(&sel_netport_lock);
return 0;
}
ret = security_port_sid(&selinux_state, protocol, pnum, sid);
if (ret != 0)
goto out;
new = kzalloc(sizeof(*new), GFP_ATOMIC);
if (new) {
new->psec.port = pnum;
new->psec.protocol = protocol;
new->psec.sid = *sid;
sel_netport_insert(new);
}
out:
spin_unlock_bh(&sel_netport_lock);
if (unlikely(ret))
pr_warn("SELinux: failure in %s(), unable to determine network port label\n",
__func__);
return ret;
}
/**
* sel_netport_sid - Lookup the SID of a network port
* @protocol: protocol
* @pnum: port
* @sid: port SID
*
* Description:
* This function determines the SID of a network port using the fastest method
* possible. First the port table is queried, but if an entry can't be found
* then the policy is queried and the result is added to the table to speedup
* future queries. Returns zero on success, negative values on failure.
*
*/
int sel_netport_sid(u8 protocol, u16 pnum, u32 *sid)
{
struct sel_netport *port;
rcu_read_lock();
port = sel_netport_find(protocol, pnum);
if (port != NULL) {
*sid = port->psec.sid;
rcu_read_unlock();
return 0;
}
rcu_read_unlock();
return sel_netport_sid_slow(protocol, pnum, sid);
}
/**
* sel_netport_flush - Flush the entire network port table
*
* Description:
* Remove all entries from the network address table.
*
*/
void sel_netport_flush(void)
{
unsigned int idx;
struct sel_netport *port, *port_tmp;
spin_lock_bh(&sel_netport_lock);
for (idx = 0; idx < SEL_NETPORT_HASH_SIZE; idx++) {
list_for_each_entry_safe(port, port_tmp,
&sel_netport_hash[idx].list, list) {
list_del_rcu(&port->list);
kfree_rcu(port, rcu);
}
sel_netport_hash[idx].size = 0;
}
spin_unlock_bh(&sel_netport_lock);
}
static __init int sel_netport_init(void)
{
int iter;
if (!selinux_enabled_boot)
return 0;
for (iter = 0; iter < SEL_NETPORT_HASH_SIZE; iter++) {
INIT_LIST_HEAD(&sel_netport_hash[iter].list);
sel_netport_hash[iter].size = 0;
}
return 0;
}
__initcall(sel_netport_init);