mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 12:11:40 +00:00
22ff67ad8c
linux/gpio.h is deprecated and subject to remove. The driver doesn't use it, simply remove the unused header. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240508114321.964374-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
873 lines
22 KiB
C
873 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
|
|
*
|
|
* Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com
|
|
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
|
|
* Author: Roger Quadros <rogerq@ti.com>
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/usb-omap.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/err.h>
|
|
|
|
#include "omap-usb.h"
|
|
|
|
#define USBHS_DRIVER_NAME "usbhs_omap"
|
|
#define OMAP_EHCI_DEVICE "ehci-omap"
|
|
#define OMAP_OHCI_DEVICE "ohci-omap3"
|
|
|
|
/* OMAP USBHOST Register addresses */
|
|
|
|
/* UHH Register Set */
|
|
#define OMAP_UHH_REVISION (0x00)
|
|
#define OMAP_UHH_SYSCONFIG (0x10)
|
|
#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
|
|
#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
|
|
#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
|
|
#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
|
|
#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
|
|
#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0)
|
|
|
|
#define OMAP_UHH_SYSSTATUS (0x14)
|
|
#define OMAP_UHH_HOSTCONFIG (0x40)
|
|
#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0)
|
|
#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0)
|
|
#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11)
|
|
#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12)
|
|
#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
|
|
#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
|
|
#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
|
|
#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5)
|
|
#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8)
|
|
#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
|
|
#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
|
|
#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31)
|
|
|
|
/* OMAP4-specific defines */
|
|
#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2)
|
|
#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2)
|
|
#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4)
|
|
#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4)
|
|
#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0)
|
|
|
|
#define OMAP4_P1_MODE_CLEAR (3 << 16)
|
|
#define OMAP4_P1_MODE_TLL (1 << 16)
|
|
#define OMAP4_P1_MODE_HSIC (3 << 16)
|
|
#define OMAP4_P2_MODE_CLEAR (3 << 18)
|
|
#define OMAP4_P2_MODE_TLL (1 << 18)
|
|
#define OMAP4_P2_MODE_HSIC (3 << 18)
|
|
|
|
#define OMAP_UHH_DEBUG_CSR (0x44)
|
|
|
|
/* Values of UHH_REVISION - Note: these are not given in the TRM */
|
|
#define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */
|
|
#define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */
|
|
|
|
#define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1)
|
|
#define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2)
|
|
|
|
#define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY)
|
|
#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
|
|
#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC)
|
|
|
|
|
|
struct usbhs_hcd_omap {
|
|
int nports;
|
|
struct clk **utmi_clk;
|
|
struct clk **hsic60m_clk;
|
|
struct clk **hsic480m_clk;
|
|
|
|
struct clk *xclk60mhsp1_ck;
|
|
struct clk *xclk60mhsp2_ck;
|
|
struct clk *utmi_p1_gfclk;
|
|
struct clk *utmi_p2_gfclk;
|
|
struct clk *init_60m_fclk;
|
|
struct clk *ehci_logic_fck;
|
|
|
|
void __iomem *uhh_base;
|
|
|
|
struct usbhs_omap_platform_data *pdata;
|
|
|
|
u32 usbhs_rev;
|
|
};
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
|
|
static u64 usbhs_dmamask = DMA_BIT_MASK(32);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
|
|
{
|
|
writel_relaxed(val, base + reg);
|
|
}
|
|
|
|
static inline u32 usbhs_read(void __iomem *base, u32 reg)
|
|
{
|
|
return readl_relaxed(base + reg);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
|
|
* to the device tree binding portN-mode found in
|
|
* 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
|
|
*/
|
|
static const char * const port_modes[] = {
|
|
[OMAP_USBHS_PORT_MODE_UNUSED] = "",
|
|
[OMAP_EHCI_PORT_MODE_PHY] = "ehci-phy",
|
|
[OMAP_EHCI_PORT_MODE_TLL] = "ehci-tll",
|
|
[OMAP_EHCI_PORT_MODE_HSIC] = "ehci-hsic",
|
|
[OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0] = "ohci-phy-6pin-datse0",
|
|
[OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM] = "ohci-phy-6pin-dpdm",
|
|
[OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0] = "ohci-phy-3pin-datse0",
|
|
[OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM] = "ohci-phy-4pin-dpdm",
|
|
[OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0] = "ohci-tll-6pin-datse0",
|
|
[OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM] = "ohci-tll-6pin-dpdm",
|
|
[OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0] = "ohci-tll-3pin-datse0",
|
|
[OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM] = "ohci-tll-4pin-dpdm",
|
|
[OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0] = "ohci-tll-2pin-datse0",
|
|
[OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM] = "ohci-tll-2pin-dpdm",
|
|
};
|
|
|
|
static struct platform_device *omap_usbhs_alloc_child(const char *name,
|
|
struct resource *res, int num_resources, void *pdata,
|
|
size_t pdata_size, struct device *dev)
|
|
{
|
|
struct platform_device *child;
|
|
int ret;
|
|
|
|
child = platform_device_alloc(name, 0);
|
|
|
|
if (!child) {
|
|
dev_err(dev, "platform_device_alloc %s failed\n", name);
|
|
goto err_end;
|
|
}
|
|
|
|
ret = platform_device_add_resources(child, res, num_resources);
|
|
if (ret) {
|
|
dev_err(dev, "platform_device_add_resources failed\n");
|
|
goto err_alloc;
|
|
}
|
|
|
|
ret = platform_device_add_data(child, pdata, pdata_size);
|
|
if (ret) {
|
|
dev_err(dev, "platform_device_add_data failed\n");
|
|
goto err_alloc;
|
|
}
|
|
|
|
child->dev.dma_mask = &usbhs_dmamask;
|
|
dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
|
|
child->dev.parent = dev;
|
|
|
|
ret = platform_device_add(child);
|
|
if (ret) {
|
|
dev_err(dev, "platform_device_add failed\n");
|
|
goto err_alloc;
|
|
}
|
|
|
|
return child;
|
|
|
|
err_alloc:
|
|
platform_device_put(child);
|
|
|
|
err_end:
|
|
return NULL;
|
|
}
|
|
|
|
static int omap_usbhs_alloc_children(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
|
|
struct platform_device *ehci;
|
|
struct platform_device *ohci;
|
|
struct resource *res;
|
|
struct resource resources[2];
|
|
int ret;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
|
|
if (!res) {
|
|
dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
|
|
ret = -ENODEV;
|
|
goto err_end;
|
|
}
|
|
resources[0] = *res;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
|
|
if (!res) {
|
|
dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
|
|
ret = -ENODEV;
|
|
goto err_end;
|
|
}
|
|
resources[1] = *res;
|
|
|
|
ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata,
|
|
sizeof(*pdata), dev);
|
|
|
|
if (!ehci) {
|
|
dev_err(dev, "omap_usbhs_alloc_child failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_end;
|
|
}
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
|
|
if (!res) {
|
|
dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
|
|
ret = -ENODEV;
|
|
goto err_ehci;
|
|
}
|
|
resources[0] = *res;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
|
|
if (!res) {
|
|
dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
|
|
ret = -ENODEV;
|
|
goto err_ehci;
|
|
}
|
|
resources[1] = *res;
|
|
|
|
ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata,
|
|
sizeof(*pdata), dev);
|
|
if (!ohci) {
|
|
dev_err(dev, "omap_usbhs_alloc_child failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_ehci;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_ehci:
|
|
platform_device_unregister(ehci);
|
|
|
|
err_end:
|
|
return ret;
|
|
}
|
|
|
|
static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
|
|
{
|
|
switch (pmode) {
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
|
|
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
|
|
return true;
|
|
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int usbhs_runtime_resume(struct device *dev)
|
|
{
|
|
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
|
|
struct usbhs_omap_platform_data *pdata = omap->pdata;
|
|
int i, r;
|
|
|
|
dev_dbg(dev, "usbhs_runtime_resume\n");
|
|
|
|
omap_tll_enable(pdata);
|
|
|
|
if (!IS_ERR(omap->ehci_logic_fck))
|
|
clk_prepare_enable(omap->ehci_logic_fck);
|
|
|
|
for (i = 0; i < omap->nports; i++) {
|
|
switch (pdata->port_mode[i]) {
|
|
case OMAP_EHCI_PORT_MODE_HSIC:
|
|
if (!IS_ERR(omap->hsic60m_clk[i])) {
|
|
r = clk_prepare_enable(omap->hsic60m_clk[i]);
|
|
if (r) {
|
|
dev_err(dev,
|
|
"Can't enable port %d hsic60m clk:%d\n",
|
|
i, r);
|
|
}
|
|
}
|
|
|
|
if (!IS_ERR(omap->hsic480m_clk[i])) {
|
|
r = clk_prepare_enable(omap->hsic480m_clk[i]);
|
|
if (r) {
|
|
dev_err(dev,
|
|
"Can't enable port %d hsic480m clk:%d\n",
|
|
i, r);
|
|
}
|
|
}
|
|
fallthrough; /* as HSIC mode needs utmi_clk */
|
|
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
if (!IS_ERR(omap->utmi_clk[i])) {
|
|
r = clk_prepare_enable(omap->utmi_clk[i]);
|
|
if (r) {
|
|
dev_err(dev,
|
|
"Can't enable port %d clk : %d\n",
|
|
i, r);
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usbhs_runtime_suspend(struct device *dev)
|
|
{
|
|
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
|
|
struct usbhs_omap_platform_data *pdata = omap->pdata;
|
|
int i;
|
|
|
|
dev_dbg(dev, "usbhs_runtime_suspend\n");
|
|
|
|
for (i = 0; i < omap->nports; i++) {
|
|
switch (pdata->port_mode[i]) {
|
|
case OMAP_EHCI_PORT_MODE_HSIC:
|
|
if (!IS_ERR(omap->hsic60m_clk[i]))
|
|
clk_disable_unprepare(omap->hsic60m_clk[i]);
|
|
|
|
if (!IS_ERR(omap->hsic480m_clk[i]))
|
|
clk_disable_unprepare(omap->hsic480m_clk[i]);
|
|
fallthrough; /* as utmi_clks were used in HSIC mode */
|
|
|
|
case OMAP_EHCI_PORT_MODE_TLL:
|
|
if (!IS_ERR(omap->utmi_clk[i]))
|
|
clk_disable_unprepare(omap->utmi_clk[i]);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!IS_ERR(omap->ehci_logic_fck))
|
|
clk_disable_unprepare(omap->ehci_logic_fck);
|
|
|
|
omap_tll_disable(pdata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
|
|
unsigned reg)
|
|
{
|
|
struct usbhs_omap_platform_data *pdata = omap->pdata;
|
|
int i;
|
|
|
|
for (i = 0; i < omap->nports; i++) {
|
|
switch (pdata->port_mode[i]) {
|
|
case OMAP_USBHS_PORT_MODE_UNUSED:
|
|
reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
|
|
break;
|
|
case OMAP_EHCI_PORT_MODE_PHY:
|
|
if (pdata->single_ulpi_bypass)
|
|
break;
|
|
|
|
if (i == 0)
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
|
|
else
|
|
reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
|
|
<< (i-1));
|
|
break;
|
|
default:
|
|
if (pdata->single_ulpi_bypass)
|
|
break;
|
|
|
|
if (i == 0)
|
|
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
|
|
else
|
|
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
|
|
<< (i-1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (pdata->single_ulpi_bypass) {
|
|
/* bypass ULPI only if none of the ports use PHY mode */
|
|
reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
|
|
|
|
for (i = 0; i < omap->nports; i++) {
|
|
if (is_ehci_phy_mode(pdata->port_mode[i])) {
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return reg;
|
|
}
|
|
|
|
static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
|
|
unsigned reg)
|
|
{
|
|
struct usbhs_omap_platform_data *pdata = omap->pdata;
|
|
int i;
|
|
|
|
for (i = 0; i < omap->nports; i++) {
|
|
/* Clear port mode fields for PHY mode */
|
|
reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
|
|
|
|
if (is_ehci_tll_mode(pdata->port_mode[i]) ||
|
|
(is_ohci_port(pdata->port_mode[i])))
|
|
reg |= OMAP4_P1_MODE_TLL << 2 * i;
|
|
else if (is_ehci_hsic_mode(pdata->port_mode[i]))
|
|
reg |= OMAP4_P1_MODE_HSIC << 2 * i;
|
|
}
|
|
|
|
return reg;
|
|
}
|
|
|
|
static void omap_usbhs_init(struct device *dev)
|
|
{
|
|
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
|
|
unsigned reg;
|
|
|
|
dev_dbg(dev, "starting TI HSUSB Controller\n");
|
|
|
|
pm_runtime_get_sync(dev);
|
|
|
|
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
|
|
/* setup ULPI bypass and burst configurations */
|
|
reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
|
|
| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
|
|
| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
|
|
reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
|
|
reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
|
|
|
|
switch (omap->usbhs_rev) {
|
|
case OMAP_USBHS_REV1:
|
|
reg = omap_usbhs_rev1_hostconfig(omap, reg);
|
|
break;
|
|
|
|
case OMAP_USBHS_REV2:
|
|
reg = omap_usbhs_rev2_hostconfig(omap, reg);
|
|
break;
|
|
|
|
default: /* newer revisions */
|
|
reg = omap_usbhs_rev2_hostconfig(omap, reg);
|
|
break;
|
|
}
|
|
|
|
usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
|
|
dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
|
|
|
|
pm_runtime_put_sync(dev);
|
|
}
|
|
|
|
static int usbhs_omap_get_dt_pdata(struct device *dev,
|
|
struct usbhs_omap_platform_data *pdata)
|
|
{
|
|
int ret, i;
|
|
struct device_node *node = dev->of_node;
|
|
|
|
ret = of_property_read_u32(node, "num-ports", &pdata->nports);
|
|
if (ret)
|
|
pdata->nports = 0;
|
|
|
|
if (pdata->nports > OMAP3_HS_USB_PORTS) {
|
|
dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n",
|
|
pdata->nports, OMAP3_HS_USB_PORTS);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* get port modes */
|
|
for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
|
|
char prop[11];
|
|
const char *mode;
|
|
|
|
pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
|
|
|
|
snprintf(prop, sizeof(prop), "port%d-mode", i + 1);
|
|
ret = of_property_read_string(node, prop, &mode);
|
|
if (ret < 0)
|
|
continue;
|
|
|
|
/* get 'enum usbhs_omap_port_mode' from port mode string */
|
|
ret = match_string(port_modes, ARRAY_SIZE(port_modes), mode);
|
|
if (ret < 0) {
|
|
dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
|
|
i, mode);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret);
|
|
pdata->port_mode[i] = ret;
|
|
}
|
|
|
|
/* get flags */
|
|
pdata->single_ulpi_bypass = of_property_read_bool(node,
|
|
"single-ulpi-bypass");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id usbhs_child_match_table[] = {
|
|
{ .compatible = "ti,ehci-omap", },
|
|
{ .compatible = "ti,ohci-omap3", },
|
|
{ }
|
|
};
|
|
|
|
/**
|
|
* usbhs_omap_probe - initialize TI-based HCDs
|
|
*
|
|
* Allocates basic resources for this USB host controller.
|
|
*
|
|
* @pdev: Pointer to this device's platform device structure
|
|
*/
|
|
static int usbhs_omap_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
|
|
struct usbhs_hcd_omap *omap;
|
|
int ret = 0;
|
|
int i;
|
|
bool need_logic_fck;
|
|
|
|
if (dev->of_node) {
|
|
/* For DT boot we populate platform data from OF node */
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
ret = usbhs_omap_get_dt_pdata(dev, pdata);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev->platform_data = pdata;
|
|
}
|
|
|
|
if (!pdata) {
|
|
dev_err(dev, "Missing platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (pdata->nports > OMAP3_HS_USB_PORTS) {
|
|
dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n",
|
|
pdata->nports, OMAP3_HS_USB_PORTS);
|
|
return -ENODEV;
|
|
}
|
|
|
|
omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
|
|
if (!omap) {
|
|
dev_err(dev, "Memory allocation failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
omap->uhh_base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(omap->uhh_base))
|
|
return PTR_ERR(omap->uhh_base);
|
|
|
|
omap->pdata = pdata;
|
|
|
|
/* Initialize the TLL subsystem */
|
|
omap_tll_init(pdata);
|
|
|
|
pm_runtime_enable(dev);
|
|
|
|
platform_set_drvdata(pdev, omap);
|
|
pm_runtime_get_sync(dev);
|
|
|
|
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
|
|
|
|
/* we need to call runtime suspend before we update omap->nports
|
|
* to prevent unbalanced clk_disable()
|
|
*/
|
|
pm_runtime_put_sync(dev);
|
|
|
|
/*
|
|
* If platform data contains nports then use that
|
|
* else make out number of ports from USBHS revision
|
|
*/
|
|
if (pdata->nports) {
|
|
omap->nports = pdata->nports;
|
|
} else {
|
|
switch (omap->usbhs_rev) {
|
|
case OMAP_USBHS_REV1:
|
|
omap->nports = 3;
|
|
break;
|
|
case OMAP_USBHS_REV2:
|
|
omap->nports = 2;
|
|
break;
|
|
default:
|
|
omap->nports = OMAP3_HS_USB_PORTS;
|
|
dev_dbg(dev,
|
|
"USB HOST Rev:0x%x not recognized, assuming %d ports\n",
|
|
omap->usbhs_rev, omap->nports);
|
|
break;
|
|
}
|
|
pdata->nports = omap->nports;
|
|
}
|
|
|
|
i = sizeof(struct clk *) * omap->nports;
|
|
omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
|
|
omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
|
|
omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
|
|
|
|
if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
|
|
dev_err(dev, "Memory allocation failed\n");
|
|
ret = -ENOMEM;
|
|
goto err_mem;
|
|
}
|
|
|
|
/* Set all clocks as invalid to begin with */
|
|
omap->ehci_logic_fck = ERR_PTR(-ENODEV);
|
|
omap->init_60m_fclk = ERR_PTR(-ENODEV);
|
|
omap->utmi_p1_gfclk = ERR_PTR(-ENODEV);
|
|
omap->utmi_p2_gfclk = ERR_PTR(-ENODEV);
|
|
omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV);
|
|
omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV);
|
|
|
|
for (i = 0; i < omap->nports; i++) {
|
|
omap->utmi_clk[i] = ERR_PTR(-ENODEV);
|
|
omap->hsic480m_clk[i] = ERR_PTR(-ENODEV);
|
|
omap->hsic60m_clk[i] = ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
/* for OMAP3 i.e. USBHS REV1 */
|
|
if (omap->usbhs_rev == OMAP_USBHS_REV1) {
|
|
need_logic_fck = false;
|
|
for (i = 0; i < omap->nports; i++) {
|
|
if (is_ehci_phy_mode(pdata->port_mode[i]) ||
|
|
is_ehci_tll_mode(pdata->port_mode[i]) ||
|
|
is_ehci_hsic_mode(pdata->port_mode[i]))
|
|
|
|
need_logic_fck |= true;
|
|
}
|
|
|
|
if (need_logic_fck) {
|
|
omap->ehci_logic_fck = devm_clk_get(dev,
|
|
"usbhost_120m_fck");
|
|
if (IS_ERR(omap->ehci_logic_fck)) {
|
|
ret = PTR_ERR(omap->ehci_logic_fck);
|
|
dev_err(dev, "usbhost_120m_fck failed:%d\n",
|
|
ret);
|
|
goto err_mem;
|
|
}
|
|
}
|
|
goto initialize;
|
|
}
|
|
|
|
/* for OMAP4+ i.e. USBHS REV2+ */
|
|
omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
|
|
if (IS_ERR(omap->utmi_p1_gfclk)) {
|
|
ret = PTR_ERR(omap->utmi_p1_gfclk);
|
|
dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
|
|
goto err_mem;
|
|
}
|
|
|
|
omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk");
|
|
if (IS_ERR(omap->utmi_p2_gfclk)) {
|
|
ret = PTR_ERR(omap->utmi_p2_gfclk);
|
|
dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
|
|
goto err_mem;
|
|
}
|
|
|
|
omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
|
|
if (IS_ERR(omap->xclk60mhsp1_ck)) {
|
|
ret = PTR_ERR(omap->xclk60mhsp1_ck);
|
|
dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret);
|
|
goto err_mem;
|
|
}
|
|
|
|
omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
|
|
if (IS_ERR(omap->xclk60mhsp2_ck)) {
|
|
ret = PTR_ERR(omap->xclk60mhsp2_ck);
|
|
dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret);
|
|
goto err_mem;
|
|
}
|
|
|
|
omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
|
|
if (IS_ERR(omap->init_60m_fclk)) {
|
|
ret = PTR_ERR(omap->init_60m_fclk);
|
|
dev_err(dev, "refclk_60m_int failed error:%d\n", ret);
|
|
goto err_mem;
|
|
}
|
|
|
|
for (i = 0; i < omap->nports; i++) {
|
|
char clkname[40];
|
|
|
|
/* clock names are indexed from 1*/
|
|
snprintf(clkname, sizeof(clkname),
|
|
"usb_host_hs_utmi_p%d_clk", i + 1);
|
|
|
|
/* If a clock is not found we won't bail out as not all
|
|
* platforms have all clocks and we can function without
|
|
* them
|
|
*/
|
|
omap->utmi_clk[i] = devm_clk_get(dev, clkname);
|
|
if (IS_ERR(omap->utmi_clk[i])) {
|
|
ret = PTR_ERR(omap->utmi_clk[i]);
|
|
dev_err(dev, "Failed to get clock : %s : %d\n",
|
|
clkname, ret);
|
|
goto err_mem;
|
|
}
|
|
|
|
snprintf(clkname, sizeof(clkname),
|
|
"usb_host_hs_hsic480m_p%d_clk", i + 1);
|
|
omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
|
|
if (IS_ERR(omap->hsic480m_clk[i])) {
|
|
ret = PTR_ERR(omap->hsic480m_clk[i]);
|
|
dev_err(dev, "Failed to get clock : %s : %d\n",
|
|
clkname, ret);
|
|
goto err_mem;
|
|
}
|
|
|
|
snprintf(clkname, sizeof(clkname),
|
|
"usb_host_hs_hsic60m_p%d_clk", i + 1);
|
|
omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
|
|
if (IS_ERR(omap->hsic60m_clk[i])) {
|
|
ret = PTR_ERR(omap->hsic60m_clk[i]);
|
|
dev_err(dev, "Failed to get clock : %s : %d\n",
|
|
clkname, ret);
|
|
goto err_mem;
|
|
}
|
|
}
|
|
|
|
if (is_ehci_phy_mode(pdata->port_mode[0])) {
|
|
ret = clk_set_parent(omap->utmi_p1_gfclk,
|
|
omap->xclk60mhsp1_ck);
|
|
if (ret != 0) {
|
|
dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n",
|
|
ret);
|
|
goto err_mem;
|
|
}
|
|
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
|
|
ret = clk_set_parent(omap->utmi_p1_gfclk,
|
|
omap->init_60m_fclk);
|
|
if (ret != 0) {
|
|
dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n",
|
|
ret);
|
|
goto err_mem;
|
|
}
|
|
}
|
|
|
|
if (is_ehci_phy_mode(pdata->port_mode[1])) {
|
|
ret = clk_set_parent(omap->utmi_p2_gfclk,
|
|
omap->xclk60mhsp2_ck);
|
|
if (ret != 0) {
|
|
dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n",
|
|
ret);
|
|
goto err_mem;
|
|
}
|
|
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
|
|
ret = clk_set_parent(omap->utmi_p2_gfclk,
|
|
omap->init_60m_fclk);
|
|
if (ret != 0) {
|
|
dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n",
|
|
ret);
|
|
goto err_mem;
|
|
}
|
|
}
|
|
|
|
initialize:
|
|
omap_usbhs_init(dev);
|
|
|
|
if (dev->of_node) {
|
|
ret = of_platform_populate(dev->of_node,
|
|
usbhs_child_match_table, NULL, dev);
|
|
|
|
if (ret) {
|
|
dev_err(dev, "Failed to create DT children: %d\n", ret);
|
|
goto err_mem;
|
|
}
|
|
|
|
} else {
|
|
ret = omap_usbhs_alloc_children(pdev);
|
|
if (ret) {
|
|
dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
|
|
ret);
|
|
goto err_mem;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_mem:
|
|
pm_runtime_disable(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int usbhs_omap_remove_child(struct device *dev, void *data)
|
|
{
|
|
dev_info(dev, "unregistering\n");
|
|
platform_device_unregister(to_platform_device(dev));
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
|
|
* @pdev: USB Host Controller being removed
|
|
*
|
|
* Reverses the effect of usbhs_omap_probe().
|
|
*/
|
|
static void usbhs_omap_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
/* remove children */
|
|
device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
|
|
}
|
|
|
|
static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
|
|
.runtime_suspend = usbhs_runtime_suspend,
|
|
.runtime_resume = usbhs_runtime_resume,
|
|
};
|
|
|
|
static const struct of_device_id usbhs_omap_dt_ids[] = {
|
|
{ .compatible = "ti,usbhs-host" },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
|
|
|
|
|
|
static struct platform_driver usbhs_omap_driver = {
|
|
.driver = {
|
|
.name = usbhs_driver_name,
|
|
.pm = &usbhsomap_dev_pm_ops,
|
|
.of_match_table = usbhs_omap_dt_ids,
|
|
},
|
|
.probe = usbhs_omap_probe,
|
|
.remove_new = usbhs_omap_remove,
|
|
};
|
|
|
|
MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
|
|
MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
|
|
MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
|
|
MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
|
|
|
|
static int omap_usbhs_drvinit(void)
|
|
{
|
|
return platform_driver_register(&usbhs_omap_driver);
|
|
}
|
|
|
|
/*
|
|
* init before ehci and ohci drivers;
|
|
* The usbhs core driver should be initialized much before
|
|
* the omap ehci and ohci probe functions are called.
|
|
* This usbhs core driver should be initialized after
|
|
* usb tll driver
|
|
*/
|
|
fs_initcall_sync(omap_usbhs_drvinit);
|
|
|
|
static void omap_usbhs_drvexit(void)
|
|
{
|
|
platform_driver_unregister(&usbhs_omap_driver);
|
|
}
|
|
module_exit(omap_usbhs_drvexit);
|