Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-05 11:32:04 +00:00
Code Issues Packages Projects Releases Wiki Activity
cbc725b371
linux/drivers/usb/serial/visor.c
Greg Kroah-Hartman 68e2411345 USB: serial: rework usb_serial_register/deregister_drivers() 
This reworks the usb_serial_register_drivers() and
usb_serial_deregister_drivers() to not need a pointer to a struct
usb_driver anymore.  The usb_driver structure is now created dynamically
and registered and unregistered as needed.

This saves lines of code in each usb-serial driver.  All in-kernel users
of these functions were also fixed up at this time.  The pl2303 driver
was tested that everything worked properly.

Thanks for the idea to do this from Alan Stern.

Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Al Borchers <alborchers@steinerpoint.com>
Cc: Aleksey Babahin <tamerlan311@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Worsley <amworsley@gmail.com>
Cc: Bart Hartgers <bart.hartgers@gmail.com>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Dan Williams <dcbw@redhat.com>
Cc: Donald Lee <donald@asix.com.tw>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Gary Brubaker <xavyer@ix.netcom.com>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Johan Hovold <jhovold@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: Kautuk Consul <consul.kautuk@gmail.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Lonnie Mendez <dignome@gmail.com>
Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com>
Cc: Matthias Urlichs <smurf@smurf.noris.de>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Michal Sroczynski <msroczyn@gmail.com>
Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Berger <pberger@brimson.com>
Cc: Preston Fick <preston.fick@silabs.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Rigbert Hamisch <rigbert@gmx.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Simon Arlott <simon@fire.lp0.eu>
Cc: Support Department <support@connecttech.com>
Cc: Thomas Tuttle <ttuttle@chromium.org>
Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Cc: Wang YanQing <Udknight@gmail.com>
Cc: William Greathouse <wgreathouse@smva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-08 15:46:14 -07:00

631 lines
19 KiB
C
Raw Blame History

/*
* USB HandSpring Visor, Palm m50x, and Sony Clie driver
* (supports all of the Palm OS USB devices)
*
* Copyright (C) 1999 - 2004
* Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/usb/cdc.h>
#include "visor.h"
/*
* Version Information
*/
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
/* function prototypes for a handspring visor */
static int visor_open(struct tty_struct *tty, struct usb_serial_port *port);
static void visor_close(struct usb_serial_port *port);
static int visor_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int visor_calc_num_ports(struct usb_serial *serial);
static void visor_read_int_callback(struct urb *urb);
static int clie_3_5_startup(struct usb_serial *serial);
static int treo_attach(struct usb_serial *serial);
static int clie_5_attach(struct usb_serial *serial);
static int palm_os_3_probe(struct usb_serial *serial,
const struct usb_device_id *id);
static int palm_os_4_probe(struct usb_serial *serial,
const struct usb_device_id *id);
/* Parameters that may be passed into the module. */
static bool debug;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID),
.driver_info = (kernel_ulong_t)&palm_os_3_probe },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ } /* Terminating entry */
};
static struct usb_device_id clie_id_5_table [] = {
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ } /* Terminating entry */
};
static struct usb_device_id clie_id_3_5_table [] = {
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
{ } /* Terminating entry */
};
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
{ USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID) },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID) },
{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID) },
{ USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID) },
{ USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID) },
{ USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) },
{ USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table_combined);
/* All of the device info needed for the Handspring Visor,
and Palm 4.0 devices */
static struct usb_serial_driver handspring_device = {
.driver = {
.owner = THIS_MODULE,
.name = "visor",
},
.description = "Handspring Visor / Palm OS",
.id_table = id_table,
.num_ports = 2,
.bulk_out_size = 256,
.open = visor_open,
.close = visor_close,
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.attach = treo_attach,
.probe = visor_probe,
.calc_num_ports = visor_calc_num_ports,
.read_int_callback = visor_read_int_callback,
};
/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */
static struct usb_serial_driver clie_5_device = {
.driver = {
.owner = THIS_MODULE,
.name = "clie_5",
},
.description = "Sony Clie 5.0",
.id_table = clie_id_5_table,
.num_ports = 2,
.bulk_out_size = 256,
.open = visor_open,
.close = visor_close,
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.attach = clie_5_attach,
.probe = visor_probe,
.calc_num_ports = visor_calc_num_ports,
.read_int_callback = visor_read_int_callback,
};
/* device info for the Sony Clie OS version 3.5 */
static struct usb_serial_driver clie_3_5_device = {
.driver = {
.owner = THIS_MODULE,
.name = "clie_3.5",
},
.description = "Sony Clie 3.5",
.id_table = clie_id_3_5_table,
.num_ports = 1,
.bulk_out_size = 256,
.open = visor_open,
.close = visor_close,
.throttle = usb_serial_generic_throttle,
.unthrottle = usb_serial_generic_unthrottle,
.attach = clie_3_5_startup,
};
static struct usb_serial_driver * const serial_drivers[] = {
&handspring_device, &clie_5_device, &clie_3_5_device, NULL
};
/******************************************************************************
* Handspring Visor specific driver functions
******************************************************************************/
static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
{
int result = 0;
if (!port->read_urb) {
/* this is needed for some brain dead Sony devices */
dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n");
return -ENODEV;
}
/* Start reading from the device */
result = usb_serial_generic_open(tty, port);
if (result)
goto exit;
if (port->interrupt_in_urb) {
dev_dbg(&port->dev, "adding interrupt input for treo\n");
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev,
"%s - failed submitting interrupt urb, error %d\n",
__func__, result);
}
exit:
return result;
}
static void visor_close(struct usb_serial_port *port)
{
unsigned char *transfer_buffer;
/* shutdown our urbs */
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected) {
/* Try to send shutdown message, unless the device is gone */
transfer_buffer = kmalloc(0x12, GFP_KERNEL);
if (transfer_buffer) {
usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
VISOR_CLOSE_NOTIFICATION, 0xc2,
0x0000, 0x0000,
transfer_buffer, 0x12, 300);
kfree(transfer_buffer);
}
}
mutex_unlock(&port->serial->disc_mutex);
}
static void visor_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
int status = urb->status;
int result;
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
__func__, status);
return;
default:
dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
__func__, status);
goto exit;
}
/*
* This information is still unknown what it can be used for.
* If anyone has an idea, please let the author know...
*
* Rumor has it this endpoint is used to notify when data
* is ready to be read from the bulk ones.
*/
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
exit:
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev,
"%s - Error %d submitting interrupt urb\n",
__func__, result);
}
static int palm_os_3_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
struct device *dev = &serial->dev->dev;
struct visor_connection_info *connection_info;
unsigned char *transfer_buffer;
char *string;
int retval = 0;
int i;
int num_ports = 0;
transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
if (!transfer_buffer) {
dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
sizeof(*connection_info));
return -ENOMEM;
}
/* send a get connection info request */
retval = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
VISOR_GET_CONNECTION_INFORMATION,
0xc2, 0x0000, 0x0000, transfer_buffer,
sizeof(*connection_info), 300);
if (retval < 0) {
dev_err(dev, "%s - error %d getting connection information\n",
__func__, retval);
goto exit;
}
if (retval == sizeof(*connection_info)) {
connection_info = (struct visor_connection_info *)
transfer_buffer;
num_ports = le16_to_cpu(connection_info->num_ports);
for (i = 0; i < num_ports; ++i) {
switch (
connection_info->connections[i].port_function_id) {
case VISOR_FUNCTION_GENERIC:
string = "Generic";
break;
case VISOR_FUNCTION_DEBUGGER:
string = "Debugger";
break;
case VISOR_FUNCTION_HOTSYNC:
string = "HotSync";
break;
case VISOR_FUNCTION_CONSOLE:
string = "Console";
break;
case VISOR_FUNCTION_REMOTE_FILE_SYS:
string = "Remote File System";
break;
default:
string = "unknown";
break;
}
dev_info(dev, "%s: port %d, is for %s use\n",
serial->type->description,
connection_info->connections[i].port, string);
}
}
/*
* Handle devices that report invalid stuff here.
*/
if (num_ports == 0 || num_ports > 2) {
dev_warn(dev, "%s: No valid connect info available\n",
serial->type->description);
num_ports = 2;
}
dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
num_ports);
/*
* save off our num_ports info so that we can use it in the
* calc_num_ports callback
*/
usb_set_serial_data(serial, (void *)(long)num_ports);
/* ask for the number of bytes available, but ignore the
response as it is broken */
retval = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
VISOR_REQUEST_BYTES_AVAILABLE,
0xc2, 0x0000, 0x0005, transfer_buffer,
0x02, 300);
if (retval < 0)
dev_err(dev, "%s - error %d getting bytes available request\n",
__func__, retval);
retval = 0;
exit:
kfree(transfer_buffer);
return retval;
}
static int palm_os_4_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
struct device *dev = &serial->dev->dev;
struct palm_ext_connection_info *connection_info;
unsigned char *transfer_buffer;
int retval;
transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
if (!transfer_buffer) {
dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
sizeof(*connection_info));
return -ENOMEM;
}
retval = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
PALM_GET_EXT_CONNECTION_INFORMATION,
0xc2, 0x0000, 0x0000, transfer_buffer,
sizeof(*connection_info), 300);
if (retval < 0)
dev_err(dev, "%s - error %d getting connection info\n",
__func__, retval);
else
usb_serial_debug_data(debug, &serial->dev->dev, __func__,
retval, transfer_buffer);
kfree(transfer_buffer);
return 0;
}
static int visor_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
int retval = 0;
int (*startup)(struct usb_serial *serial,
const struct usb_device_id *id);
/*
* some Samsung Android phones in modem mode have the same ID
* as SPH-I500, but they are ACM devices, so dont bind to them
*/
if (id->idVendor == SAMSUNG_VENDOR_ID &&
id->idProduct == SAMSUNG_SPH_I500_ID &&
serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
serial->dev->descriptor.bDeviceSubClass ==
USB_CDC_SUBCLASS_ACM)
return -ENODEV;
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
if (id->driver_info) {
startup = (void *)id->driver_info;
retval = startup(serial, id);
}
return retval;
}
static int visor_calc_num_ports(struct usb_serial *serial)
{
int num_ports = (int)(long)(usb_get_serial_data(serial));
if (num_ports)
usb_set_serial_data(serial, NULL);
return num_ports;
}
static int clie_3_5_startup(struct usb_serial *serial)
{
struct device *dev = &serial->dev->dev;
int result;
u8 *data;
data = kmalloc(1, GFP_KERNEL);
if (!data)
return -ENOMEM;
/*
* Note that PEG-300 series devices expect the following two calls.
*/
/* get the config number */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
0, 0, data, 1, 3000);
if (result < 0) {
dev_err(dev, "%s: get config number failed: %d\n",
__func__, result);
goto out;
}
if (result != 1) {
dev_err(dev, "%s: get config number bad return length: %d\n",
__func__, result);
result = -EIO;
goto out;
}
/* get the interface number */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
USB_REQ_GET_INTERFACE,
USB_DIR_IN | USB_RECIP_INTERFACE,
0, 0, data, 1, 3000);
if (result < 0) {
dev_err(dev, "%s: get interface number failed: %d\n",
__func__, result);
goto out;
}
if (result != 1) {
dev_err(dev,
"%s: get interface number bad return length: %d\n",
__func__, result);
result = -EIO;
goto out;
}
result = 0;
out:
kfree(data);
return result;
}
static int treo_attach(struct usb_serial *serial)
{
struct usb_serial_port *swap_port;
/* Only do this endpoint hack for the Handspring devices with
* interrupt in endpoints, which for now are the Treo devices. */
if (!((le16_to_cpu(serial->dev->descriptor.idVendor)
== HANDSPRING_VENDOR_ID) ||
(le16_to_cpu(serial->dev->descriptor.idVendor)
== KYOCERA_VENDOR_ID)) ||
(serial->num_interrupt_in == 0))
return 0;
/*
* It appears that Treos and Kyoceras want to use the
* 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
* so let's swap the 1st and 2nd bulk in and interrupt endpoints.
* Note that swapping the bulk out endpoints would break lots of
* apps that want to communicate on the second port.
*/
#define COPY_PORT(dest, src) \
do { \
dest->read_urb = src->read_urb; \
dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
dest->bulk_in_buffer = src->bulk_in_buffer; \
dest->interrupt_in_urb = src->interrupt_in_urb; \
dest->interrupt_in_endpointAddress = \
src->interrupt_in_endpointAddress;\
dest->interrupt_in_buffer = src->interrupt_in_buffer; \
} while (0);
swap_port = kmalloc(sizeof(*swap_port), GFP_KERNEL);
if (!swap_port)
return -ENOMEM;
COPY_PORT(swap_port, serial->port[0]);
COPY_PORT(serial->port[0], serial->port[1]);
COPY_PORT(serial->port[1], swap_port);
kfree(swap_port);
return 0;
}
static int clie_5_attach(struct usb_serial *serial)
{
struct usb_serial_port *port;
unsigned int pipe;
int j;
/* TH55 registers 2 ports.
Communication in from the UX50/TH55 uses bulk_in_endpointAddress
from port 0. Communication out to the UX50/TH55 uses
bulk_out_endpointAddress from port 1
Lets do a quick and dirty mapping
*/
/* some sanity check */
if (serial->num_ports < 2)
return -1;
/* port 0 now uses the modified endpoint Address */
port = serial->port[0];
port->bulk_out_endpointAddress =
serial->port[1]->bulk_out_endpointAddress;
pipe = usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress);
for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j)
port->write_urbs[j]->pipe = pipe;
return 0;
}
module_usb_serial_driver(serial_drivers, id_table_combined);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
Reference in New Issue View Git Blame Copy Permalink