mirror of
https://github.com/torvalds/linux.git
synced 2024-11-08 05:01:48 +00:00
c0d6fe2f01
As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here.) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJWQT2WAAoJEIwa5zzehBx37tgQAIBe5eDJFXFihTlyOQ2plL3q vVH4OCzXIHELfM1J8CGZNah1wCQqNOts8RAmDCzxr+zSYuLOwJOEDZ6NKmErMxl0 NTj3+BsqKO3NRym970ofPqU9JRLQmpZ8K7dzk8Nwj2+r1WZHFu/j6Jv44n/Ns0lw 7+wxnG322lTm7SnvALCMD5lD4Y7VpThooWy5SdFtRoAetn+cLbVCJIeeQvO6Vxkp NooeJR0t2e8cpbAND5Jwu6eeWRcIbrvgjYDe0omhrIY05i9yNvIsC2HuQFGjF43z p2CnQvcKnhOXTZw3yse1Fx5igA7jqwVjjC/lVeDyxhusAtLpmuB6qbSaj7DpqkSQ nJxX1d49WKm68K+aknmee1kYRrvc4DE/kORI4IxXnsVNMu16ifTVLnxKgUhwzukb eZdTP6rsqgNozaYvh0k1vfSFd+CNSkBg+E9nrI3tU95yo3LOIhobVBCvBcWlmUvQ JdavRztqosChjIx3a9i1eCNKJtCg9p4m+gWjUqVVWsxBHe/3HojzjZnsBSynIQMA uGIVm0TKhNl1Svxl3oJo9257UCUK7+5PqJHK9IHrcWDULYx05JGSjuZcyvNS6Fo+ u1DMf0ud4gXJYhecFBa7b3zRjk5YxptgCCTjeEEOTUJbbhZqDjGFZlNuFi6dmqD3 ILJ2QMe/DGiPIlUmCfsx =qY1q -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, this is the massive branch we have for each release. Lots of various updates and additions of hardware descriptions on existing hardware, as well as the usual additions of new boards and SoCs. This is also the first release where we've started mixing 64- and 32-bit DT updates in one branch. (Specific details on what's actually here and new is pretty easy to tell from the diffstat, so there's little point in duplicating listing it here)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits) ARM: dts: uniphier: add system-bus-controller nodes ARM64: juno: disable NOR flash node by default ARM: dts: uniphier: add outer cache controller nodes arm64: defconfig: Enable PCI generic host bridge by default arm64: Juno: Add support for the PCIe host bridge on Juno R1 Documentation: of: Document the bindings used by Juno R1 PCIe host bridge ARM: dts: uniphier: add I2C aliases for ProXstream2 boards dts/Makefile: Add build support for LS2080a QDS & RDB board DTS dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards dts/ls2080a: Update Simulator DTS to add support of various peripherals dts/ls2080a: Remove text about writing to Free Software Foundation dts/ls2080a: Update DTSI to add support of various peripherals doc: DTS: Update DWC3 binding to provide reference to generic bindings doc/bindings: Update GPIO devicetree binding documentation for LS2080A Documentation/dts: Move FSL board-specific bindings out of /powerpc Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards arm64: Rename FSL LS2085A SoC support code to LS2080A arm64: Use generic Layerscape SoC family naming ARM: dts: uniphier: add ProXstream2 Vodka board support ARM: dts: uniphier: add ProXstream2 Gentil board support ...
1067 lines
23 KiB
Plaintext
1067 lines
23 KiB
Plaintext
/*
|
|
* Google Peach Pit Rev 6+ board device tree source
|
|
*
|
|
* Copyright (c) 2014 Google, Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/clock/maxim,max77802.h>
|
|
#include <dt-bindings/regulator/maxim,max77802.h>
|
|
#include "exynos5420.dtsi"
|
|
|
|
/ {
|
|
model = "Google Peach Pit Rev 6+";
|
|
|
|
compatible = "google,pit-rev16",
|
|
"google,pit-rev15", "google,pit-rev14",
|
|
"google,pit-rev13", "google,pit-rev12",
|
|
"google,pit-rev11", "google,pit-rev10",
|
|
"google,pit-rev9", "google,pit-rev8",
|
|
"google,pit-rev7", "google,pit-rev6",
|
|
"google,pit", "google,peach","samsung,exynos5420",
|
|
"samsung,exynos5";
|
|
|
|
aliases {
|
|
/* Assign 20 so we don't get confused w/ builtin ones */
|
|
i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 1000000 0>;
|
|
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
|
|
default-brightness-level = <7>;
|
|
power-supply = <&tps65090_fet1>;
|
|
pinctrl-0 = <&pwm0_out>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial3:115200n8";
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
oscclk {
|
|
compatible = "samsung,exynos5420-oscclk";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&power_key_irq &lid_irq>;
|
|
|
|
power {
|
|
label = "Power";
|
|
gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_POWER>;
|
|
gpio-key,wakeup;
|
|
};
|
|
|
|
lid-switch {
|
|
label = "Lid";
|
|
gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <5>; /* EV_SW */
|
|
linux,code = <0>; /* SW_LID */
|
|
debounce-interval = <1>;
|
|
gpio-key,wakeup;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x20000000 0x80000000>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "google,snow-audio-max98090";
|
|
|
|
samsung,model = "Peach-Pit-I2S-MAX98090";
|
|
samsung,i2s-controller = <&i2s0>;
|
|
samsung,audio-codec = <&max98090>;
|
|
};
|
|
|
|
usb300_vbus_reg: regulator-usb300 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "P5.0V_USB3CON0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb300_vbus_en>;
|
|
enable-active-high;
|
|
};
|
|
|
|
usb301_vbus_reg: regulator-usb301 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "P5.0V_USB3CON1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb301_vbus_en>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vbat: fixed-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbat-supply";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
panel: panel {
|
|
compatible = "auo,b116xw03";
|
|
power-supply = <&tps65090_fet6>;
|
|
backlight = <&backlight>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&bridge_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
mmc1_pwrseq: mmc1_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
|
|
clocks = <&max77802 MAX77802_CLK_32K_CP>;
|
|
clock-names = "ext_clock";
|
|
};
|
|
};
|
|
|
|
&adc {
|
|
status = "okay";
|
|
vdd-supply = <&ldo9_reg>;
|
|
};
|
|
|
|
&dp {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dp_hpd_gpio>;
|
|
samsung,color-space = <0>;
|
|
samsung,dynamic-range = <0>;
|
|
samsung,ycbcr-coeff = <0>;
|
|
samsung,color-depth = <1>;
|
|
samsung,link-rate = <0x06>;
|
|
samsung,lane-count = <2>;
|
|
samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
|
|
|
|
ports {
|
|
port@0 {
|
|
dp_out: endpoint {
|
|
remote-endpoint = <&bridge_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&fimd {
|
|
status = "okay";
|
|
samsung,invert-vclk;
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_hpd_irq>;
|
|
ddc = <&i2c_2>;
|
|
|
|
hdmi-en-supply = <&tps65090_fet7>;
|
|
vdd-supply = <&ldo8_reg>;
|
|
vdd_osc-supply = <&ldo10_reg>;
|
|
vdd_pll-supply = <&ldo8_reg>;
|
|
};
|
|
|
|
&hsi2c_4 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
max77802: max77802-pmic@9 {
|
|
compatible = "maxim,max77802";
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <1 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
|
|
<&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
|
|
wakeup-source;
|
|
reg = <0x9>;
|
|
#clock-cells = <1>;
|
|
|
|
inb1-supply = <&tps65090_dcdc2>;
|
|
inb2-supply = <&tps65090_dcdc1>;
|
|
inb3-supply = <&tps65090_dcdc2>;
|
|
inb4-supply = <&tps65090_dcdc2>;
|
|
inb5-supply = <&tps65090_dcdc1>;
|
|
inb6-supply = <&tps65090_dcdc2>;
|
|
inb7-supply = <&tps65090_dcdc1>;
|
|
inb8-supply = <&tps65090_dcdc1>;
|
|
inb9-supply = <&tps65090_dcdc1>;
|
|
inb10-supply = <&tps65090_dcdc1>;
|
|
|
|
inl1-supply = <&buck5_reg>;
|
|
inl2-supply = <&buck7_reg>;
|
|
inl3-supply = <&buck9_reg>;
|
|
inl4-supply = <&buck9_reg>;
|
|
inl5-supply = <&buck9_reg>;
|
|
inl6-supply = <&tps65090_dcdc2>;
|
|
inl7-supply = <&buck9_reg>;
|
|
inl9-supply = <&tps65090_dcdc2>;
|
|
inl10-supply = <&buck7_reg>;
|
|
|
|
regulators {
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "vdd_int";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "vdd_g3d";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "vdd_1v2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "vdd_kfc";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "vdd_1v35";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "vdd_emmc";
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "vdd_2v";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck10_reg: BUCK10 {
|
|
regulator-name = "vdd_1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "vdd_1v0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <MAX77802_OPMODE_LP>;
|
|
};
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "vdd_1v2_2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "vdd_1v8_3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <MAX77802_OPMODE_LP>;
|
|
};
|
|
};
|
|
|
|
vqmmc_sdcard: ldo4_reg: LDO4 {
|
|
regulator-name = "vdd_sd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "vdd_1v8_5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "vdd_1v8_6";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "vdd_1v8_7";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "vdd_ldo8";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "vdd_ldo9";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <MAX77802_OPMODE_LP>;
|
|
};
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "vdd_ldo10";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "vdd_ldo11";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <MAX77802_OPMODE_LP>;
|
|
};
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "vdd_ldo12";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "vdd_ldo13";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <MAX77802_OPMODE_LP>;
|
|
};
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "vdd_ldo14";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "vdd_ldo15";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "vdd_g3ds";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo18_reg: LDO18 {
|
|
regulator-name = "ldo_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "ldo_19";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "ldo_20";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "ldo_21";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo23_reg: LDO23 {
|
|
regulator-name = "ldo_23";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "ldo_24";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "ldo_25";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "ldo_26";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
ldo27_reg: LDO27 {
|
|
regulator-name = "ldo_27";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
ldo28_reg: LDO28 {
|
|
regulator-name = "ldo_28";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo29_reg: LDO29 {
|
|
regulator-name = "ldo_29";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo30_reg: LDO30 {
|
|
regulator-name = "vdd_mifs";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo32_reg: LDO32 {
|
|
regulator-name = "ldo_32";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
ldo33_reg: LDO33 {
|
|
regulator-name = "ldo_33";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
ldo34_reg: LDO34 {
|
|
regulator-name = "ldo_34";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
ldo35_reg: LDO35 {
|
|
regulator-name = "ldo_35";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&hsi2c_7 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
max98090: codec@10 {
|
|
compatible = "maxim,max98090";
|
|
reg = <0x10>;
|
|
interrupts = <2 0>;
|
|
interrupt-parent = <&gpx0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&max98090_irq>;
|
|
clocks = <&pmu_system_controller 0>;
|
|
clock-names = "mclk";
|
|
};
|
|
|
|
light-sensor@44 {
|
|
compatible = "isil,isl29018";
|
|
reg = <0x44>;
|
|
vcc-supply = <&tps65090_fet5>;
|
|
};
|
|
|
|
ps8625: lvds-bridge@48 {
|
|
compatible = "parade,ps8625";
|
|
reg = <0x48>;
|
|
sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
|
|
lane-count = <2>;
|
|
use-external-pwm;
|
|
|
|
ports {
|
|
port@0 {
|
|
bridge_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
bridge_in: endpoint {
|
|
remote-endpoint = <&dp_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
&hsi2c_8 {
|
|
status = "okay";
|
|
clock-frequency = <333000>;
|
|
|
|
/* Atmel mXT336S */
|
|
trackpad@4b {
|
|
compatible = "atmel,maxtouch";
|
|
reg = <0x4b>;
|
|
interrupt-parent = <&gpx1>;
|
|
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
|
wakeup-source;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&trackpad_irq>;
|
|
linux,gpio-keymap = <KEY_RESERVED
|
|
KEY_RESERVED
|
|
KEY_RESERVED /* GPIO0 */
|
|
KEY_RESERVED /* GPIO1 */
|
|
KEY_RESERVED /* GPIO2 */
|
|
BTN_LEFT>; /* GPIO3 */
|
|
};
|
|
};
|
|
|
|
&hsi2c_9 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
tpm@20 {
|
|
compatible = "infineon,slb9645tt";
|
|
reg = <0x20>;
|
|
|
|
/* Unused irq; but still need to configure the pins */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tpm_irq>;
|
|
};
|
|
};
|
|
|
|
&i2c_2 {
|
|
status = "okay";
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
samsung,i2c-slave-addr = <0x50>;
|
|
};
|
|
|
|
&i2s0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc_0 {
|
|
status = "okay";
|
|
num-slots = <1>;
|
|
broken-cd;
|
|
mmc-hs200-1_8v;
|
|
cap-mmc-highspeed;
|
|
non-removable;
|
|
card-detect-delay = <200>;
|
|
clock-frequency = <400000000>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
samsung,dw-mshc-hs400-timing = <0 2>;
|
|
samsung,read-strobe-delay = <90>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
|
|
bus-width = <8>;
|
|
};
|
|
|
|
&mmc_1 {
|
|
status = "okay";
|
|
num-slots = <1>;
|
|
broken-cd;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
card-detect-delay = <200>;
|
|
clock-frequency = <400000000>;
|
|
samsung,dw-mshc-ciu-div = <1>;
|
|
samsung,dw-mshc-sdr-timing = <0 1>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
|
|
<&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
mmc-pwrseq = <&mmc1_pwrseq>;
|
|
vqmmc-supply = <&buck10_reg>;
|
|
};
|
|
|
|
&mmc_2 {
|
|
status = "okay";
|
|
num-slots = <1>;
|
|
cap-sd-highspeed;
|
|
card-detect-delay = <200>;
|
|
clock-frequency = <400000000>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
|
|
&pinctrl_0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mask_tpm_reset>;
|
|
|
|
wifi_en: wifi-en {
|
|
samsung,pins = "gpx0-0";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
max98090_irq: max98090-irq {
|
|
samsung,pins = "gpx0-2";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
/* We need GPX0_6 to be low at sleep time; just keep it low always */
|
|
mask_tpm_reset: mask-tpm-reset {
|
|
samsung,pins = "gpx0-6";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
samsung,pin-val = <0>;
|
|
};
|
|
|
|
tpm_irq: tpm-irq {
|
|
samsung,pins = "gpx1-0";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
trackpad_irq: trackpad-irq {
|
|
samsung,pins = "gpx1-1";
|
|
samsung,pin-function = <0xf>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
power_key_irq: power-key-irq {
|
|
samsung,pins = "gpx1-2";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
ec_irq: ec-irq {
|
|
samsung,pins = "gpx1-5";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
tps65090_irq: tps65090-irq {
|
|
samsung,pins = "gpx2-5";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
dp_hpd_gpio: dp_hpd_gpio {
|
|
samsung,pins = "gpx2-6";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <3>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
max77802_irq: max77802-irq {
|
|
samsung,pins = "gpx3-1";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
lid_irq: lid-irq {
|
|
samsung,pins = "gpx3-4";
|
|
samsung,pin-function = <0xf>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
hdmi_hpd_irq: hdmi-hpd-irq {
|
|
samsung,pins = "gpx3-7";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <1>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
pmic_dvs_1: pmic-dvs-1 {
|
|
samsung,pins = "gpy7-6";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
/* Adjust WiFi drive strengths lower for EMI */
|
|
sd1_clk: sd1-clk {
|
|
samsung,pin-drv = <2>;
|
|
};
|
|
|
|
sd1_cmd: sd1-cmd {
|
|
samsung,pin-drv = <2>;
|
|
};
|
|
|
|
sd1_bus1: sd1-bus-width1 {
|
|
samsung,pin-drv = <2>;
|
|
};
|
|
|
|
sd1_bus4: sd1-bus-width4 {
|
|
samsung,pin-drv = <2>;
|
|
};
|
|
|
|
sd1_bus8: sd1-bus-width8 {
|
|
samsung,pin-drv = <2>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_2 {
|
|
pmic_dvs_2: pmic-dvs-2 {
|
|
samsung,pins = "gpj4-2";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
pmic_dvs_3: pmic-dvs-3 {
|
|
samsung,pins = "gpj4-3";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&pinctrl_3 {
|
|
/* Drive SPI lines at x2 for better integrity */
|
|
spi2-bus {
|
|
samsung,pin-drv = <2>;
|
|
};
|
|
|
|
/* Drive SPI chip select at x2 for better integrity */
|
|
ec_spi_cs: ec-spi-cs {
|
|
samsung,pins = "gpb1-2";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <2>;
|
|
};
|
|
|
|
usb300_vbus_en: usb300-vbus-en {
|
|
samsung,pins = "gph0-0";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
usb301_vbus_en: usb301-vbus-en {
|
|
samsung,pins = "gph0-1";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
pmic_selb: pmic-selb {
|
|
samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
|
|
"gph0-6";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
};
|
|
|
|
&pmu_system_controller {
|
|
assigned-clocks = <&pmu_system_controller 0>;
|
|
assigned-clock-parents = <&clock CLK_FIN_PLL>;
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&spi_2 {
|
|
status = "okay";
|
|
num-cs = <1>;
|
|
samsung,spi-src-clk = <0>;
|
|
cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
cros_ec: cros-ec@0 {
|
|
compatible = "google,cros-ec-spi";
|
|
interrupt-parent = <&gpx1>;
|
|
interrupts = <5 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ec_spi_cs &ec_irq>;
|
|
reg = <0>;
|
|
spi-max-frequency = <3125000>;
|
|
google,has-vbc-nvram;
|
|
|
|
controller-data {
|
|
samsung,spi-feedback-delay = <1>;
|
|
};
|
|
|
|
i2c-tunnel {
|
|
compatible = "google,cros-ec-i2c-tunnel";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
google,remote-bus = <0>;
|
|
|
|
battery: sbs-battery@b {
|
|
compatible = "sbs,sbs-battery";
|
|
reg = <0xb>;
|
|
sbs,poll-retry-count = <1>;
|
|
sbs,i2c-retry-count = <2>;
|
|
};
|
|
|
|
power-regulator@48 {
|
|
compatible = "ti,tps65090";
|
|
reg = <0x48>;
|
|
|
|
/*
|
|
* Config irq to disable internal pulls
|
|
* even though we run in polling mode.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tps65090_irq>;
|
|
|
|
vsys1-supply = <&vbat>;
|
|
vsys2-supply = <&vbat>;
|
|
vsys3-supply = <&vbat>;
|
|
infet1-supply = <&vbat>;
|
|
infet2-supply = <&tps65090_dcdc1>;
|
|
infet3-supply = <&tps65090_dcdc2>;
|
|
infet4-supply = <&tps65090_dcdc2>;
|
|
infet5-supply = <&tps65090_dcdc2>;
|
|
infet6-supply = <&tps65090_dcdc2>;
|
|
infet7-supply = <&tps65090_dcdc1>;
|
|
vsys-l1-supply = <&vbat>;
|
|
vsys-l2-supply = <&vbat>;
|
|
|
|
regulators {
|
|
tps65090_dcdc1: dcdc1 {
|
|
ti,enable-ext-control;
|
|
};
|
|
tps65090_dcdc2: dcdc2 {
|
|
ti,enable-ext-control;
|
|
};
|
|
tps65090_dcdc3: dcdc3 {
|
|
ti,enable-ext-control;
|
|
};
|
|
tps65090_fet1: fet1 {
|
|
regulator-name = "vcd_led";
|
|
};
|
|
tps65090_fet2: fet2 {
|
|
regulator-name = "video_mid";
|
|
regulator-always-on;
|
|
};
|
|
tps65090_fet3: fet3 {
|
|
regulator-name = "wwan_r";
|
|
regulator-always-on;
|
|
};
|
|
tps65090_fet4: fet4 {
|
|
regulator-name = "sdcard";
|
|
regulator-always-on;
|
|
};
|
|
tps65090_fet5: fet5 {
|
|
regulator-name = "camout";
|
|
regulator-always-on;
|
|
};
|
|
tps65090_fet6: fet6 {
|
|
regulator-name = "lcd_vdd";
|
|
};
|
|
tps65090_fet7: fet7 {
|
|
regulator-name = "video_mid_1a";
|
|
regulator-always-on;
|
|
};
|
|
tps65090_ldo1: ldo1 {
|
|
};
|
|
tps65090_ldo2: ldo2 {
|
|
};
|
|
};
|
|
|
|
charger {
|
|
compatible = "ti,tps65090-charger";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&serial_3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usbdrd_phy0 {
|
|
vbus-supply = <&usb300_vbus_reg>;
|
|
};
|
|
|
|
&usbdrd_phy1 {
|
|
vbus-supply = <&usb301_vbus_reg>;
|
|
};
|
|
|
|
/*
|
|
* Use longest HW watchdog in SoC (32 seconds) since the hardware
|
|
* watchdog provides no debugging information (compared to soft/hard
|
|
* lockup detectors) and so should be last resort.
|
|
*/
|
|
&watchdog {
|
|
timeout-sec = <32>;
|
|
};
|
|
|
|
#include "cros-ec-keyboard.dtsi"
|
|
#include "cros-adc-thermistors.dtsi"
|