mirror of
https://github.com/torvalds/linux.git
synced 2024-12-01 08:31:37 +00:00
aea07a986c
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://msgid.link/r/20240513080525.2353168-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
185 lines
4.2 KiB
C
185 lines
4.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
|
|
static const struct regulator_ops max8893_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
};
|
|
|
|
static const struct regulator_desc max8893_regulators[] = {
|
|
{
|
|
.name = "BUCK",
|
|
.supply_name = "in-buck",
|
|
.of_match = of_match_ptr("buck"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.n_voltages = 0x11,
|
|
.id = 6,
|
|
.ops = &max8893_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = 800000,
|
|
.uV_step = 100000,
|
|
.vsel_reg = 0x4,
|
|
.vsel_mask = 0x1f,
|
|
.enable_reg = 0x0,
|
|
.enable_mask = BIT(7),
|
|
},
|
|
{
|
|
.name = "LDO1",
|
|
.supply_name = "in-ldo1",
|
|
.of_match = of_match_ptr("ldo1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.n_voltages = 0x12,
|
|
.id = 1,
|
|
.ops = &max8893_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = 1600000,
|
|
.uV_step = 100000,
|
|
.vsel_reg = 0x5,
|
|
.vsel_mask = 0x1f,
|
|
.enable_reg = 0x0,
|
|
.enable_mask = BIT(5),
|
|
},
|
|
{
|
|
.name = "LDO2",
|
|
.supply_name = "in-ldo2",
|
|
.of_match = of_match_ptr("ldo2"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.n_voltages = 0x16,
|
|
.id = 2,
|
|
.ops = &max8893_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = 1200000,
|
|
.uV_step = 100000,
|
|
.vsel_reg = 0x6,
|
|
.vsel_mask = 0x1f,
|
|
.enable_reg = 0x0,
|
|
.enable_mask = BIT(4),
|
|
},
|
|
{
|
|
.name = "LDO3",
|
|
.supply_name = "in-ldo3",
|
|
.of_match = of_match_ptr("ldo3"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.n_voltages = 0x12,
|
|
.id = 3,
|
|
.ops = &max8893_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = 1600000,
|
|
.uV_step = 100000,
|
|
.vsel_reg = 0x7,
|
|
.vsel_mask = 0x1f,
|
|
.enable_reg = 0x0,
|
|
.enable_mask = BIT(3),
|
|
},
|
|
{
|
|
.name = "LDO4",
|
|
.supply_name = "in-ldo4",
|
|
.of_match = of_match_ptr("ldo4"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.n_voltages = 0x1a,
|
|
.id = 4,
|
|
.ops = &max8893_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = 800000,
|
|
.uV_step = 100000,
|
|
.vsel_reg = 0x8,
|
|
.vsel_mask = 0x1f,
|
|
.enable_reg = 0x0,
|
|
.enable_mask = BIT(2),
|
|
},
|
|
{
|
|
.name = "LDO5",
|
|
.supply_name = "in-ldo5",
|
|
.of_match = of_match_ptr("ldo5"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.n_voltages = 0x1a,
|
|
.id = 5,
|
|
.ops = &max8893_ops,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = 800000,
|
|
.uV_step = 100000,
|
|
.vsel_reg = 0x9,
|
|
.vsel_mask = 0x1f,
|
|
.enable_reg = 0x0,
|
|
.enable_mask = BIT(1),
|
|
}
|
|
};
|
|
|
|
static const struct regmap_config max8893_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
static int max8893_probe(struct i2c_client *i2c)
|
|
{
|
|
int id, ret;
|
|
struct regulator_config config = {.dev = &i2c->dev};
|
|
struct regmap *regmap = devm_regmap_init_i2c(i2c, &max8893_regmap);
|
|
|
|
if (IS_ERR(regmap)) {
|
|
ret = PTR_ERR(regmap);
|
|
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
for (id = 0; id < ARRAY_SIZE(max8893_regulators); id++) {
|
|
struct regulator_dev *rdev;
|
|
rdev = devm_regulator_register(&i2c->dev,
|
|
&max8893_regulators[id],
|
|
&config);
|
|
if (IS_ERR(rdev)) {
|
|
ret = PTR_ERR(rdev);
|
|
dev_err(&i2c->dev, "failed to register %s: %d\n",
|
|
max8893_regulators[id].name, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id max8893_dt_match[] = {
|
|
{ .compatible = "maxim,max8893" },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max8893_dt_match);
|
|
#endif
|
|
|
|
static const struct i2c_device_id max8893_ids[] = {
|
|
{ "max8893" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max8893_ids);
|
|
|
|
static struct i2c_driver max8893_driver = {
|
|
.probe = max8893_probe,
|
|
.driver = {
|
|
.name = "max8893",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = of_match_ptr(max8893_dt_match),
|
|
},
|
|
.id_table = max8893_ids,
|
|
};
|
|
|
|
module_i2c_driver(max8893_driver);
|
|
|
|
MODULE_DESCRIPTION("Maxim MAX8893 PMIC driver");
|
|
MODULE_AUTHOR("Sergey Larin <cerg2010cerg2010@mail.ru>");
|
|
MODULE_LICENSE("GPL");
|