linux/drivers/usb/serial
Alexandr \"Sky\" Ivanov ca24763588 USB: option: add D-Link DWM-152/C1 and DWM-156/C1
Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices.

DWM-152/C1:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07d1 ProdID=3e01 Rev= 0.00
S:  Product=USB Configuration
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

DWM-156/C1:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07d1 ProdID=3e02 Rev= 0.00
S:  Product=DataCard Device
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23 10:59:39 -07:00
..
aircable.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ark3116.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
belkin_sa.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
belkin_sa.h
bus.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
ch341.c USB: ch341: fix TIOCMIWAIT and disconnect 2013-03-25 13:50:52 -07:00
console.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
cp210x.c USB: cp210x: add MMB and PI ZigBee USB Device Support 2013-07-22 11:34:16 -07:00
cyberjack.c USB: cyberjack: fix disconnect handling 2013-03-25 13:48:26 -07:00
cypress_m8.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
cypress_m8.h USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device 2013-06-03 10:33:10 -07:00
digi_acceleport.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
empeg.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ezusb_convert.pl
f81232.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
flashloader.c USB: serial: add support Infineon modem USB flashloader driver 2013-06-03 10:52:40 -07:00
ftdi_sio_ids.h USB: ftdi_sio: Add support for Newport CONEX motor drivers 2013-05-17 11:55:23 -07:00
ftdi_sio.c USB: ftdi_sio: Add support for Newport CONEX motor drivers 2013-05-17 11:55:23 -07:00
ftdi_sio.h
funsoft.c USB: serial: funsoft.c: remove debug module parameter 2012-09-14 12:31:27 -07:00
garmin_gps.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
generic.c USB: serial: add generic wait_until_sent implementation 2013-05-16 17:32:21 -07:00
hp4x.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
io_16654.h
io_edgeport.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
io_edgeport.h
io_ionsp.h
io_tables.h USB: io_edgeport: switch to generic TIOCMIWAIT implementation 2013-03-25 13:50:53 -07:00
io_ti.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
io_ti.h
io_usbvend.h
ipaq.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ipw.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
ir-usb.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
iuu_phoenix.c USB: iuu_phoenix: fix bulk-message timeout 2013-05-29 10:50:43 +09:00
iuu_phoenix.h
Kconfig USB: serial: add support Infineon modem USB flashloader driver 2013-06-03 10:52:40 -07:00
keyspan_pda.c USB patches for 3.10-rc1 2013-04-29 12:19:23 -07:00
keyspan_usa26msg.h
keyspan_usa28msg.h
keyspan_usa49msg.h
keyspan_usa67msg.h
keyspan_usa90msg.h
keyspan.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
keyspan.h USB: keyspan: fix NULL-pointer dereferences and memory leaks 2012-10-25 09:37:13 -07:00
kl5kusb105.c USB: kl5kusb105: always disable uart on close 2013-03-25 13:54:31 -07:00
kl5kusb105.h
kobil_sct.c USB: kobil_sct: use port interrupt-out urb 2013-04-17 10:05:35 -07:00
kobil_sct.h
Makefile USB: serial: add support Infineon modem USB flashloader driver 2013-06-03 10:52:40 -07:00
Makefile-keyspan_pda_fw
mct_u232.c USB: mct_u232: clean up read implementation 2013-04-17 10:05:35 -07:00
mct_u232.h
metro-usb.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
mos7720.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
mos7840.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
moto_modem.c
navman.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
omninet.c USB: omninet: switch to generic read implementation 2013-04-17 10:05:34 -07:00
opticon.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
option.c USB: option: add D-Link DWM-152/C1 and DWM-156/C1 2013-07-23 10:59:39 -07:00
oti6858.c USB: oti6858: fix TIOCMIWAIT and disconnect 2013-03-25 13:52:25 -07:00
oti6858.h
pl2303.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
pl2303.h
qcaux.c qcaux: add Franklin U600 2013-03-11 11:09:17 -07:00
qcserial.c USB: option,qcserial: move Novatel Gobi1K IDs to qcserial 2013-06-24 16:21:53 -07:00
quatech2.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
safe_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
siemens_mpi.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
sierra.c USB: serial: ports: add minor and port number 2013-06-10 14:46:40 -07:00
spcp8x5.c USB: spcp8x5: fix device initialisation at open 2013-06-10 11:00:49 -07:00
ssu100.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
symbolserial.c USB: symbolserial: move private-data allocation to port_probe 2013-04-17 10:05:35 -07:00
ti_usb_3410_5052.c Merge 3.10-rc7 into usb-next 2013-06-24 15:20:26 -07:00
ti_usb_3410_5052.h USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable 2013-06-19 15:54:45 -07:00
usb_debug.c
usb_wwan.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
usb-serial.c USB: serial: increase the number of devices we support 2013-06-17 13:34:15 -07:00
usb-wwan.h USB: usb-wwan: fix multiple memory leaks in error paths 2012-10-25 09:37:13 -07:00
visor.c USB: visor: fix initialisation of Treo/Kyocera devices 2013-05-29 10:47:45 +09:00
visor.h
vivopay-serial.c USB: serial: remove driver version information 2012-10-31 12:48:06 -07:00
whiteheat.c USB: serial: make minor allocation dynamic 2013-06-17 13:30:02 -07:00
whiteheat.h
wishbone-serial.c USB: serial: wishbone-serial: fix up minor sparse warning 2013-04-11 08:45:34 -07:00
xsens_mt.c usb: add driver for xsens motion trackers 2013-01-25 09:56:54 -08:00
zio.c
zte_ev.c USB: option,zte_ev: move most ZTE CDMA devices to zte_ev 2013-06-06 09:06:25 -07:00