mirror of
https://github.com/torvalds/linux.git
synced 2024-12-18 17:12:55 +00:00
97fa4cf442
This driver allows to provide DT clocks for core clocks found on Marvell Kirkwood, Dove & 370/XP SoCs. The core clock frequencies and ratios are determined by decoding the Sample-At-Reset registers. Although technically correct, using a divider of 0 will lead to div_by_zero panic. Let's use a ratio of 0/1 instead to fail later with a zero clock. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by Gregory CLEMENT <gregory.clement@free-electrons.com>
48 lines
1.6 KiB
Plaintext
48 lines
1.6 KiB
Plaintext
* Core Clock bindings for Marvell MVEBU SoCs
|
|
|
|
Marvell MVEBU SoCs usually allow to determine core clock frequencies by
|
|
reading the Sample-At-Reset (SAR) register. The core clock consumer should
|
|
specify the desired clock by having the clock ID in its "clocks" phandle cell.
|
|
|
|
The following is a list of provided IDs and clock names on Armada 370/XP:
|
|
0 = tclk (Internal Bus clock)
|
|
1 = cpuclk (CPU clock)
|
|
2 = nbclk (L2 Cache clock)
|
|
3 = hclk (DRAM control clock)
|
|
4 = dramclk (DDR clock)
|
|
|
|
The following is a list of provided IDs and clock names on Kirkwood and Dove:
|
|
0 = tclk (Internal Bus clock)
|
|
1 = cpuclk (CPU0 clock)
|
|
2 = l2clk (L2 Cache clock derived from CPU0 clock)
|
|
3 = ddrclk (DDR controller clock derived from CPU0 clock)
|
|
|
|
Required properties:
|
|
- compatible : shall be one of the following:
|
|
"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
|
|
"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
|
|
"marvell,dove-core-clock" - for Dove SoC core clocks
|
|
"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
|
|
"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
|
|
- reg : shall be the register address of the Sample-At-Reset (SAR) register
|
|
- #clock-cells : from common clock binding; shall be set to 1
|
|
|
|
Optional properties:
|
|
- clock-output-names : from common clock binding; allows overwrite default clock
|
|
output names ("tclk", "cpuclk", "l2clk", "ddrclk")
|
|
|
|
Example:
|
|
|
|
core_clk: core-clocks@d0214 {
|
|
compatible = "marvell,dove-core-clock";
|
|
reg = <0xd0214 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
spi0: spi@10600 {
|
|
compatible = "marvell,orion-spi";
|
|
/* ... */
|
|
/* get tclk from core clock provider */
|
|
clocks = <&core_clk 0>;
|
|
};
|