mirror of
https://github.com/torvalds/linux.git
synced 2024-11-30 16:11:38 +00:00
8bb25184b3
For the Freescale M5282 ColdFire, Port UA Pin Assignment Register should set to UART mode. Patch submitted by David Wu <davidwu@arcturusnetworks.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
160 lines
7.1 KiB
C
160 lines
7.1 KiB
C
/****************************************************************************/
|
|
|
|
/*
|
|
* m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
|
|
*
|
|
* (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
|
|
*/
|
|
|
|
/****************************************************************************/
|
|
#ifndef m528xsim_h
|
|
#define m528xsim_h
|
|
/****************************************************************************/
|
|
|
|
|
|
/*
|
|
* Define the 5280/5282 SIM register set addresses.
|
|
*/
|
|
#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
|
|
#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */
|
|
#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
|
|
#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
|
|
#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
|
|
#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
|
|
#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
|
|
#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
|
|
#define MCFINTC_IRLR 0x18 /* */
|
|
#define MCFINTC_IACKL 0x19 /* */
|
|
#define MCFINTC_ICR0 0x40 /* Base ICR register */
|
|
|
|
#define MCFINT_VECBASE 64 /* Vector base number */
|
|
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
|
|
#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
|
|
|
|
/*
|
|
* SDRAM configuration registers.
|
|
*/
|
|
#define MCFSIM_DCR 0x44 /* SDRAM control */
|
|
#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
|
|
#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
|
|
#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
|
|
#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
|
|
|
|
/*
|
|
* Derek Cheung - 6 Feb 2005
|
|
* add I2C and QSPI register definition using Freescale's MCF5282
|
|
*/
|
|
/* set Port AS pin for I2C or UART */
|
|
#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056)
|
|
|
|
/* Port UA Pin Assignment Register (8 Bit) */
|
|
#define MCF5282_GPIO_PUAPAR 0x10005C
|
|
|
|
/* Interrupt Mask Register Register Low */
|
|
#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
|
|
/* Interrupt Control Register 7 */
|
|
#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51)
|
|
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Inter-IC (I2C) Module
|
|
*
|
|
*********************************************************************/
|
|
/* Read/Write access macros for general use */
|
|
#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address
|
|
#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
|
|
#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
|
|
#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
|
|
#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
|
|
|
|
/* Bit level definitions and macros */
|
|
#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
|
|
|
|
#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F))
|
|
|
|
#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable
|
|
#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable
|
|
#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode
|
|
#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode
|
|
#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable
|
|
#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start
|
|
|
|
#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit
|
|
#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave
|
|
#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy
|
|
#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost
|
|
#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write
|
|
#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt
|
|
#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge
|
|
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Queued Serial Peripheral Interface (QSPI) Module
|
|
*
|
|
*********************************************************************/
|
|
/* Derek - 21 Feb 2005 */
|
|
/* change to the format used in I2C */
|
|
/* Read/Write access macros for general use */
|
|
#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340
|
|
#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344
|
|
#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348
|
|
#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C
|
|
#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350
|
|
#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354
|
|
#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354
|
|
|
|
/* Bit level definitions and macros */
|
|
#define MCF5282_QSPI_QMR_MSTR (0x8000)
|
|
#define MCF5282_QSPI_QMR_DOHIE (0x4000)
|
|
#define MCF5282_QSPI_QMR_BITS_16 (0x0000)
|
|
#define MCF5282_QSPI_QMR_BITS_8 (0x2000)
|
|
#define MCF5282_QSPI_QMR_BITS_9 (0x2400)
|
|
#define MCF5282_QSPI_QMR_BITS_10 (0x2800)
|
|
#define MCF5282_QSPI_QMR_BITS_11 (0x2C00)
|
|
#define MCF5282_QSPI_QMR_BITS_12 (0x3000)
|
|
#define MCF5282_QSPI_QMR_BITS_13 (0x3400)
|
|
#define MCF5282_QSPI_QMR_BITS_14 (0x3800)
|
|
#define MCF5282_QSPI_QMR_BITS_15 (0x3C00)
|
|
#define MCF5282_QSPI_QMR_CPOL (0x0200)
|
|
#define MCF5282_QSPI_QMR_CPHA (0x0100)
|
|
#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF))
|
|
|
|
#define MCF5282_QSPI_QDLYR_SPE (0x80)
|
|
#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8)
|
|
#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF))
|
|
|
|
#define MCF5282_QSPI_QWR_HALT (0x8000)
|
|
#define MCF5282_QSPI_QWR_WREN (0x4000)
|
|
#define MCF5282_QSPI_QWR_WRTO (0x2000)
|
|
#define MCF5282_QSPI_QWR_CSIV (0x1000)
|
|
#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8)
|
|
#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4)
|
|
#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F))
|
|
|
|
#define MCF5282_QSPI_QIR_WCEFB (0x8000)
|
|
#define MCF5282_QSPI_QIR_ABRTB (0x4000)
|
|
#define MCF5282_QSPI_QIR_ABRTL (0x1000)
|
|
#define MCF5282_QSPI_QIR_WCEFE (0x0800)
|
|
#define MCF5282_QSPI_QIR_ABRTE (0x0400)
|
|
#define MCF5282_QSPI_QIR_SPIFE (0x0100)
|
|
#define MCF5282_QSPI_QIR_WCEF (0x0008)
|
|
#define MCF5282_QSPI_QIR_ABRT (0x0004)
|
|
#define MCF5282_QSPI_QIR_SPIF (0x0001)
|
|
|
|
#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F))
|
|
|
|
#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00))
|
|
#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8)
|
|
#define MCF5282_QSPI_QCR_CONT (0x8000)
|
|
#define MCF5282_QSPI_QCR_BITSE (0x4000)
|
|
#define MCF5282_QSPI_QCR_DT (0x2000)
|
|
#define MCF5282_QSPI_QCR_DSCK (0x1000)
|
|
#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8)
|
|
|
|
/****************************************************************************/
|
|
#endif /* m528xsim_h */
|