mirror of
https://github.com/torvalds/linux.git
synced 2024-12-25 12:21:37 +00:00
bf6c973440
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [rob herring: drop conflicting atmel-nand.txt changes] Signed-off-by: Rob Herring <rob.herring@calxeda.com>
39 lines
1.0 KiB
Plaintext
39 lines
1.0 KiB
Plaintext
Representing flash partitions in devicetree
|
|
|
|
Partitions can be represented by sub-nodes of an mtd device. This can be used
|
|
on platforms which have strong conventions about which portions of a flash are
|
|
used for what purposes, but which don't use an on-flash partition table such
|
|
as RedBoot.
|
|
|
|
#address-cells & #size-cells must both be present in the mtd device and be
|
|
equal to 1.
|
|
|
|
Required properties:
|
|
- reg : The partition's offset and size within the mtd bank.
|
|
|
|
Optional properties:
|
|
- label : The label / name for this partition. If omitted, the label is taken
|
|
from the node name (excluding the unit address).
|
|
- read-only : This parameter, if present, is a hint to Linux that this
|
|
partition should only be mounted read-only. This is usually used for flash
|
|
partitions containing early-boot firmware images or data which should not be
|
|
clobbered.
|
|
|
|
Examples:
|
|
|
|
|
|
flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
uimage@100000 {
|
|
reg = <0x0100000 0x200000>;
|
|
};
|
|
};
|