mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 05:11:48 +00:00
d9ca676bcb
The ATM subsystem was incorrectly creating the 'device' link for ATM nodes in sysfs. This led to incorrect device/parent relationships exposed by sysfs and udev. Instead of rolling the 'device' link by hand in the generic ATM code, pass each ATM driver's bus device down to the sysfs code and let sysfs do this stuff correctly. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1375 lines
35 KiB
C
1375 lines
35 KiB
C
/*
|
|
* Driver for the Solos PCI ADSL2+ card, designed to support Linux by
|
|
* Traverse Technologies -- http://www.traverse.com.au/
|
|
* Xrio Limited -- http://www.xrio.com/
|
|
*
|
|
*
|
|
* Copyright © 2008 Traverse Technologies
|
|
* Copyright © 2008 Intel Corporation
|
|
*
|
|
* Authors: Nathan Williams <nathan@traverse.com.au>
|
|
* David Woodhouse <dwmw2@infradead.org>
|
|
* Treker Chen <treker@xrio.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#define DEBUG
|
|
#define VERBOSE_DEBUG
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/atm.h>
|
|
#include <linux/atmdev.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kobject.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/swab.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define VERSION "0.07"
|
|
#define PTAG "solos-pci"
|
|
|
|
#define CONFIG_RAM_SIZE 128
|
|
#define FLAGS_ADDR 0x7C
|
|
#define IRQ_EN_ADDR 0x78
|
|
#define FPGA_VER 0x74
|
|
#define IRQ_CLEAR 0x70
|
|
#define WRITE_FLASH 0x6C
|
|
#define PORTS 0x68
|
|
#define FLASH_BLOCK 0x64
|
|
#define FLASH_BUSY 0x60
|
|
#define FPGA_MODE 0x5C
|
|
#define FLASH_MODE 0x58
|
|
#define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
|
|
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
|
|
|
|
#define DATA_RAM_SIZE 32768
|
|
#define BUF_SIZE 2048
|
|
#define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
|
|
#define FPGA_PAGE 528 /* FPGA flash page size*/
|
|
#define SOLOS_PAGE 512 /* Solos flash page size*/
|
|
#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
|
|
#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
|
|
|
|
#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
|
|
#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
|
|
#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
|
|
|
|
#define RX_DMA_SIZE 2048
|
|
|
|
#define FPGA_VERSION(a,b) (((a) << 8) + (b))
|
|
#define LEGACY_BUFFERS 2
|
|
#define DMA_SUPPORTED 4
|
|
|
|
static int reset = 0;
|
|
static int atmdebug = 0;
|
|
static int firmware_upgrade = 0;
|
|
static int fpga_upgrade = 0;
|
|
static int db_firmware_upgrade = 0;
|
|
static int db_fpga_upgrade = 0;
|
|
|
|
struct pkt_hdr {
|
|
__le16 size;
|
|
__le16 vpi;
|
|
__le16 vci;
|
|
__le16 type;
|
|
};
|
|
|
|
struct solos_skb_cb {
|
|
struct atm_vcc *vcc;
|
|
uint32_t dma_addr;
|
|
};
|
|
|
|
|
|
#define SKB_CB(skb) ((struct solos_skb_cb *)skb->cb)
|
|
|
|
#define PKT_DATA 0
|
|
#define PKT_COMMAND 1
|
|
#define PKT_POPEN 3
|
|
#define PKT_PCLOSE 4
|
|
#define PKT_STATUS 5
|
|
|
|
struct solos_card {
|
|
void __iomem *config_regs;
|
|
void __iomem *buffers;
|
|
int nr_ports;
|
|
int tx_mask;
|
|
struct pci_dev *dev;
|
|
struct atm_dev *atmdev[4];
|
|
struct tasklet_struct tlet;
|
|
spinlock_t tx_lock;
|
|
spinlock_t tx_queue_lock;
|
|
spinlock_t cli_queue_lock;
|
|
spinlock_t param_queue_lock;
|
|
struct list_head param_queue;
|
|
struct sk_buff_head tx_queue[4];
|
|
struct sk_buff_head cli_queue[4];
|
|
struct sk_buff *tx_skb[4];
|
|
struct sk_buff *rx_skb[4];
|
|
wait_queue_head_t param_wq;
|
|
wait_queue_head_t fw_wq;
|
|
int using_dma;
|
|
int fpga_version;
|
|
int buffer_size;
|
|
};
|
|
|
|
|
|
struct solos_param {
|
|
struct list_head list;
|
|
pid_t pid;
|
|
int port;
|
|
struct sk_buff *response;
|
|
};
|
|
|
|
#define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
|
|
|
|
MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
|
|
MODULE_DESCRIPTION("Solos PCI driver");
|
|
MODULE_VERSION(VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE("solos-FPGA.bin");
|
|
MODULE_FIRMWARE("solos-Firmware.bin");
|
|
MODULE_FIRMWARE("solos-db-FPGA.bin");
|
|
MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
|
|
MODULE_PARM_DESC(atmdebug, "Print ATM data");
|
|
MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
|
|
MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
|
|
MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
|
|
MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
|
|
module_param(reset, int, 0444);
|
|
module_param(atmdebug, int, 0644);
|
|
module_param(firmware_upgrade, int, 0444);
|
|
module_param(fpga_upgrade, int, 0444);
|
|
module_param(db_firmware_upgrade, int, 0444);
|
|
module_param(db_fpga_upgrade, int, 0444);
|
|
|
|
static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
|
|
struct atm_vcc *vcc);
|
|
static uint32_t fpga_tx(struct solos_card *);
|
|
static irqreturn_t solos_irq(int irq, void *dev_id);
|
|
static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
|
|
static int list_vccs(int vci);
|
|
static void release_vccs(struct atm_dev *dev);
|
|
static int atm_init(struct solos_card *, struct device *);
|
|
static void atm_remove(struct solos_card *);
|
|
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
|
|
static void solos_bh(unsigned long);
|
|
static int print_buffer(struct sk_buff *buf);
|
|
|
|
static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
|
|
{
|
|
if (vcc->pop)
|
|
vcc->pop(vcc, skb);
|
|
else
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
|
|
static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
|
|
struct solos_card *card = atmdev->dev_data;
|
|
struct solos_param prm;
|
|
struct sk_buff *skb;
|
|
struct pkt_hdr *header;
|
|
int buflen;
|
|
|
|
buflen = strlen(attr->attr.name) + 10;
|
|
|
|
skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
|
|
if (!skb) {
|
|
dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
header = (void *)skb_put(skb, sizeof(*header));
|
|
|
|
buflen = snprintf((void *)&header[1], buflen - 1,
|
|
"L%05d\n%s\n", current->pid, attr->attr.name);
|
|
skb_put(skb, buflen);
|
|
|
|
header->size = cpu_to_le16(buflen);
|
|
header->vpi = cpu_to_le16(0);
|
|
header->vci = cpu_to_le16(0);
|
|
header->type = cpu_to_le16(PKT_COMMAND);
|
|
|
|
prm.pid = current->pid;
|
|
prm.response = NULL;
|
|
prm.port = SOLOS_CHAN(atmdev);
|
|
|
|
spin_lock_irq(&card->param_queue_lock);
|
|
list_add(&prm.list, &card->param_queue);
|
|
spin_unlock_irq(&card->param_queue_lock);
|
|
|
|
fpga_queue(card, prm.port, skb, NULL);
|
|
|
|
wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
|
|
|
|
spin_lock_irq(&card->param_queue_lock);
|
|
list_del(&prm.list);
|
|
spin_unlock_irq(&card->param_queue_lock);
|
|
|
|
if (!prm.response)
|
|
return -EIO;
|
|
|
|
buflen = prm.response->len;
|
|
memcpy(buf, prm.response->data, buflen);
|
|
kfree_skb(prm.response);
|
|
|
|
return buflen;
|
|
}
|
|
|
|
static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
|
|
struct solos_card *card = atmdev->dev_data;
|
|
struct solos_param prm;
|
|
struct sk_buff *skb;
|
|
struct pkt_hdr *header;
|
|
int buflen;
|
|
ssize_t ret;
|
|
|
|
buflen = strlen(attr->attr.name) + 11 + count;
|
|
|
|
skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
|
|
if (!skb) {
|
|
dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
header = (void *)skb_put(skb, sizeof(*header));
|
|
|
|
buflen = snprintf((void *)&header[1], buflen - 1,
|
|
"L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
|
|
|
|
skb_put(skb, buflen);
|
|
header->size = cpu_to_le16(buflen);
|
|
header->vpi = cpu_to_le16(0);
|
|
header->vci = cpu_to_le16(0);
|
|
header->type = cpu_to_le16(PKT_COMMAND);
|
|
|
|
prm.pid = current->pid;
|
|
prm.response = NULL;
|
|
prm.port = SOLOS_CHAN(atmdev);
|
|
|
|
spin_lock_irq(&card->param_queue_lock);
|
|
list_add(&prm.list, &card->param_queue);
|
|
spin_unlock_irq(&card->param_queue_lock);
|
|
|
|
fpga_queue(card, prm.port, skb, NULL);
|
|
|
|
wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
|
|
|
|
spin_lock_irq(&card->param_queue_lock);
|
|
list_del(&prm.list);
|
|
spin_unlock_irq(&card->param_queue_lock);
|
|
|
|
skb = prm.response;
|
|
|
|
if (!skb)
|
|
return -EIO;
|
|
|
|
buflen = skb->len;
|
|
|
|
/* Sometimes it has a newline, sometimes it doesn't. */
|
|
if (skb->data[buflen - 1] == '\n')
|
|
buflen--;
|
|
|
|
if (buflen == 2 && !strncmp(skb->data, "OK", 2))
|
|
ret = count;
|
|
else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
|
|
ret = -EIO;
|
|
else {
|
|
/* We know we have enough space allocated for this; we allocated
|
|
it ourselves */
|
|
skb->data[buflen] = 0;
|
|
|
|
dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
|
|
skb->data);
|
|
ret = -EIO;
|
|
}
|
|
kfree_skb(skb);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static char *next_string(struct sk_buff *skb)
|
|
{
|
|
int i = 0;
|
|
char *this = skb->data;
|
|
|
|
for (i = 0; i < skb->len; i++) {
|
|
if (this[i] == '\n') {
|
|
this[i] = 0;
|
|
skb_pull(skb, i + 1);
|
|
return this;
|
|
}
|
|
if (!isprint(this[i]))
|
|
return NULL;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Status packet has fields separated by \n, starting with a version number
|
|
* for the information therein. Fields are....
|
|
*
|
|
* packet version
|
|
* RxBitRate (version >= 1)
|
|
* TxBitRate (version >= 1)
|
|
* State (version >= 1)
|
|
* LocalSNRMargin (version >= 1)
|
|
* LocalLineAttn (version >= 1)
|
|
*/
|
|
static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
|
|
{
|
|
char *str, *end, *state_str, *snr, *attn;
|
|
int ver, rate_up, rate_down;
|
|
|
|
if (!card->atmdev[port])
|
|
return -ENODEV;
|
|
|
|
str = next_string(skb);
|
|
if (!str)
|
|
return -EIO;
|
|
|
|
ver = simple_strtol(str, NULL, 10);
|
|
if (ver < 1) {
|
|
dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
|
|
ver);
|
|
return -EIO;
|
|
}
|
|
|
|
str = next_string(skb);
|
|
if (!str)
|
|
return -EIO;
|
|
if (!strcmp(str, "ERROR")) {
|
|
dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
|
|
port);
|
|
return 0;
|
|
}
|
|
|
|
rate_down = simple_strtol(str, &end, 10);
|
|
if (*end)
|
|
return -EIO;
|
|
|
|
str = next_string(skb);
|
|
if (!str)
|
|
return -EIO;
|
|
rate_up = simple_strtol(str, &end, 10);
|
|
if (*end)
|
|
return -EIO;
|
|
|
|
state_str = next_string(skb);
|
|
if (!state_str)
|
|
return -EIO;
|
|
|
|
/* Anything but 'Showtime' is down */
|
|
if (strcmp(state_str, "Showtime")) {
|
|
atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
|
|
release_vccs(card->atmdev[port]);
|
|
dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
|
|
return 0;
|
|
}
|
|
|
|
snr = next_string(skb);
|
|
if (!snr)
|
|
return -EIO;
|
|
attn = next_string(skb);
|
|
if (!attn)
|
|
return -EIO;
|
|
|
|
dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
|
|
port, state_str, rate_down/1000, rate_up/1000,
|
|
snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
|
|
|
|
card->atmdev[port]->link_rate = rate_down / 424;
|
|
atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
|
|
{
|
|
struct solos_param *prm;
|
|
unsigned long flags;
|
|
int cmdpid;
|
|
int found = 0;
|
|
|
|
if (skb->len < 7)
|
|
return 0;
|
|
|
|
if (skb->data[0] != 'L' || !isdigit(skb->data[1]) ||
|
|
!isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
|
|
!isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
|
|
skb->data[6] != '\n')
|
|
return 0;
|
|
|
|
cmdpid = simple_strtol(&skb->data[1], NULL, 10);
|
|
|
|
spin_lock_irqsave(&card->param_queue_lock, flags);
|
|
list_for_each_entry(prm, &card->param_queue, list) {
|
|
if (prm->port == port && prm->pid == cmdpid) {
|
|
prm->response = skb;
|
|
skb_pull(skb, 7);
|
|
wake_up(&card->param_wq);
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&card->param_queue_lock, flags);
|
|
return found;
|
|
}
|
|
|
|
static ssize_t console_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
|
|
struct solos_card *card = atmdev->dev_data;
|
|
struct sk_buff *skb;
|
|
unsigned int len;
|
|
|
|
spin_lock(&card->cli_queue_lock);
|
|
skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
|
|
spin_unlock(&card->cli_queue_lock);
|
|
if(skb == NULL)
|
|
return sprintf(buf, "No data.\n");
|
|
|
|
len = skb->len;
|
|
memcpy(buf, skb->data, len);
|
|
dev_dbg(&card->dev->dev, "len: %d\n", len);
|
|
|
|
kfree_skb(skb);
|
|
return len;
|
|
}
|
|
|
|
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct pkt_hdr *header;
|
|
|
|
if (size > (BUF_SIZE - sizeof(*header))) {
|
|
dev_dbg(&card->dev->dev, "Command is too big. Dropping request\n");
|
|
return 0;
|
|
}
|
|
skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
|
|
if (!skb) {
|
|
dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
|
|
return 0;
|
|
}
|
|
|
|
header = (void *)skb_put(skb, sizeof(*header));
|
|
|
|
header->size = cpu_to_le16(size);
|
|
header->vpi = cpu_to_le16(0);
|
|
header->vci = cpu_to_le16(0);
|
|
header->type = cpu_to_le16(PKT_COMMAND);
|
|
|
|
memcpy(skb_put(skb, size), buf, size);
|
|
|
|
fpga_queue(card, dev, skb, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t console_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
|
|
struct solos_card *card = atmdev->dev_data;
|
|
int err;
|
|
|
|
err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
|
|
|
|
return err?:count;
|
|
}
|
|
|
|
static DEVICE_ATTR(console, 0644, console_show, console_store);
|
|
|
|
|
|
#define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
|
|
#define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
|
|
|
|
#include "solos-attrlist.c"
|
|
|
|
#undef SOLOS_ATTR_RO
|
|
#undef SOLOS_ATTR_RW
|
|
|
|
#define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
|
|
#define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
|
|
|
|
static struct attribute *solos_attrs[] = {
|
|
#include "solos-attrlist.c"
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group solos_attr_group = {
|
|
.attrs = solos_attrs,
|
|
.name = "parameters",
|
|
};
|
|
|
|
static int flash_upgrade(struct solos_card *card, int chip)
|
|
{
|
|
const struct firmware *fw;
|
|
const char *fw_name;
|
|
uint32_t data32 = 0;
|
|
int blocksize = 0;
|
|
int numblocks = 0;
|
|
int offset;
|
|
|
|
switch (chip) {
|
|
case 0:
|
|
fw_name = "solos-FPGA.bin";
|
|
blocksize = FPGA_BLOCK;
|
|
break;
|
|
case 1:
|
|
fw_name = "solos-Firmware.bin";
|
|
blocksize = SOLOS_BLOCK;
|
|
break;
|
|
case 2:
|
|
if (card->fpga_version > LEGACY_BUFFERS){
|
|
fw_name = "solos-db-FPGA.bin";
|
|
blocksize = FPGA_BLOCK;
|
|
} else {
|
|
dev_info(&card->dev->dev, "FPGA version doesn't support"
|
|
" daughter board upgrades\n");
|
|
return -EPERM;
|
|
}
|
|
break;
|
|
case 3:
|
|
if (card->fpga_version > LEGACY_BUFFERS){
|
|
fw_name = "solos-Firmware.bin";
|
|
blocksize = SOLOS_BLOCK;
|
|
} else {
|
|
dev_info(&card->dev->dev, "FPGA version doesn't support"
|
|
" daughter board upgrades\n");
|
|
return -EPERM;
|
|
}
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (request_firmware(&fw, fw_name, &card->dev->dev))
|
|
return -ENOENT;
|
|
|
|
dev_info(&card->dev->dev, "Flash upgrade starting\n");
|
|
|
|
numblocks = fw->size / blocksize;
|
|
dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
|
|
dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
|
|
|
|
dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
|
|
iowrite32(1, card->config_regs + FPGA_MODE);
|
|
data32 = ioread32(card->config_regs + FPGA_MODE);
|
|
|
|
/* Set mode to Chip Erase */
|
|
if(chip == 0 || chip == 2)
|
|
dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
|
|
if(chip == 1 || chip == 3)
|
|
dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
|
|
iowrite32((chip * 2), card->config_regs + FLASH_MODE);
|
|
|
|
|
|
iowrite32(1, card->config_regs + WRITE_FLASH);
|
|
wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
|
|
|
|
for (offset = 0; offset < fw->size; offset += blocksize) {
|
|
int i;
|
|
|
|
/* Clear write flag */
|
|
iowrite32(0, card->config_regs + WRITE_FLASH);
|
|
|
|
/* Set mode to Block Write */
|
|
/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
|
|
iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
|
|
|
|
/* Copy block to buffer, swapping each 16 bits */
|
|
for(i = 0; i < blocksize; i += 4) {
|
|
uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
|
|
if(card->fpga_version > LEGACY_BUFFERS)
|
|
iowrite32(word, FLASH_BUF + i);
|
|
else
|
|
iowrite32(word, RX_BUF(card, 3) + i);
|
|
}
|
|
|
|
/* Specify block number and then trigger flash write */
|
|
iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
|
|
iowrite32(1, card->config_regs + WRITE_FLASH);
|
|
wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
|
|
}
|
|
|
|
release_firmware(fw);
|
|
iowrite32(0, card->config_regs + WRITE_FLASH);
|
|
iowrite32(0, card->config_regs + FPGA_MODE);
|
|
iowrite32(0, card->config_regs + FLASH_MODE);
|
|
dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t solos_irq(int irq, void *dev_id)
|
|
{
|
|
struct solos_card *card = dev_id;
|
|
int handled = 1;
|
|
|
|
iowrite32(0, card->config_regs + IRQ_CLEAR);
|
|
|
|
/* If we're up and running, just kick the tasklet to process TX/RX */
|
|
if (card->atmdev[0])
|
|
tasklet_schedule(&card->tlet);
|
|
else
|
|
wake_up(&card->fw_wq);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
void solos_bh(unsigned long card_arg)
|
|
{
|
|
struct solos_card *card = (void *)card_arg;
|
|
uint32_t card_flags;
|
|
uint32_t rx_done = 0;
|
|
int port;
|
|
|
|
/*
|
|
* Since fpga_tx() is going to need to read the flags under its lock,
|
|
* it can return them to us so that we don't have to hit PCI MMIO
|
|
* again for the same information
|
|
*/
|
|
card_flags = fpga_tx(card);
|
|
|
|
for (port = 0; port < card->nr_ports; port++) {
|
|
if (card_flags & (0x10 << port)) {
|
|
struct pkt_hdr _hdr, *header;
|
|
struct sk_buff *skb;
|
|
struct atm_vcc *vcc;
|
|
int size;
|
|
|
|
if (card->using_dma) {
|
|
skb = card->rx_skb[port];
|
|
card->rx_skb[port] = NULL;
|
|
|
|
pci_unmap_single(card->dev, SKB_CB(skb)->dma_addr,
|
|
RX_DMA_SIZE, PCI_DMA_FROMDEVICE);
|
|
|
|
header = (void *)skb->data;
|
|
size = le16_to_cpu(header->size);
|
|
skb_put(skb, size + sizeof(*header));
|
|
skb_pull(skb, sizeof(*header));
|
|
} else {
|
|
header = &_hdr;
|
|
|
|
rx_done |= 0x10 << port;
|
|
|
|
memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
|
|
|
|
size = le16_to_cpu(header->size);
|
|
if (size > (card->buffer_size - sizeof(*header))){
|
|
dev_warn(&card->dev->dev, "Invalid buffer size\n");
|
|
continue;
|
|
}
|
|
|
|
skb = alloc_skb(size + 1, GFP_ATOMIC);
|
|
if (!skb) {
|
|
if (net_ratelimit())
|
|
dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
|
|
continue;
|
|
}
|
|
|
|
memcpy_fromio(skb_put(skb, size),
|
|
RX_BUF(card, port) + sizeof(*header),
|
|
size);
|
|
}
|
|
if (atmdebug) {
|
|
dev_info(&card->dev->dev, "Received: device %d\n", port);
|
|
dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
|
|
size, le16_to_cpu(header->vpi),
|
|
le16_to_cpu(header->vci));
|
|
print_buffer(skb);
|
|
}
|
|
|
|
switch (le16_to_cpu(header->type)) {
|
|
case PKT_DATA:
|
|
vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
|
|
le16_to_cpu(header->vci));
|
|
if (!vcc) {
|
|
if (net_ratelimit())
|
|
dev_warn(&card->dev->dev, "Received packet for unknown VCI.VPI %d.%d on port %d\n",
|
|
le16_to_cpu(header->vci), le16_to_cpu(header->vpi),
|
|
port);
|
|
continue;
|
|
}
|
|
atm_charge(vcc, skb->truesize);
|
|
vcc->push(vcc, skb);
|
|
atomic_inc(&vcc->stats->rx);
|
|
break;
|
|
|
|
case PKT_STATUS:
|
|
if (process_status(card, port, skb) &&
|
|
net_ratelimit()) {
|
|
dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
|
|
print_buffer(skb);
|
|
}
|
|
dev_kfree_skb_any(skb);
|
|
break;
|
|
|
|
case PKT_COMMAND:
|
|
default: /* FIXME: Not really, surely? */
|
|
if (process_command(card, port, skb))
|
|
break;
|
|
spin_lock(&card->cli_queue_lock);
|
|
if (skb_queue_len(&card->cli_queue[port]) > 10) {
|
|
if (net_ratelimit())
|
|
dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
|
|
port);
|
|
dev_kfree_skb_any(skb);
|
|
} else
|
|
skb_queue_tail(&card->cli_queue[port], skb);
|
|
spin_unlock(&card->cli_queue_lock);
|
|
break;
|
|
}
|
|
}
|
|
/* Allocate RX skbs for any ports which need them */
|
|
if (card->using_dma && card->atmdev[port] &&
|
|
!card->rx_skb[port]) {
|
|
struct sk_buff *skb = alloc_skb(RX_DMA_SIZE, GFP_ATOMIC);
|
|
if (skb) {
|
|
SKB_CB(skb)->dma_addr =
|
|
pci_map_single(card->dev, skb->data,
|
|
RX_DMA_SIZE, PCI_DMA_FROMDEVICE);
|
|
iowrite32(SKB_CB(skb)->dma_addr,
|
|
card->config_regs + RX_DMA_ADDR(port));
|
|
card->rx_skb[port] = skb;
|
|
} else {
|
|
if (net_ratelimit())
|
|
dev_warn(&card->dev->dev, "Failed to allocate RX skb");
|
|
|
|
/* We'll have to try again later */
|
|
tasklet_schedule(&card->tlet);
|
|
}
|
|
}
|
|
}
|
|
if (rx_done)
|
|
iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
|
|
|
|
return;
|
|
}
|
|
|
|
static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
|
|
{
|
|
struct hlist_head *head;
|
|
struct atm_vcc *vcc = NULL;
|
|
struct hlist_node *node;
|
|
struct sock *s;
|
|
|
|
read_lock(&vcc_sklist_lock);
|
|
head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
|
|
sk_for_each(s, node, head) {
|
|
vcc = atm_sk(s);
|
|
if (vcc->dev == dev && vcc->vci == vci &&
|
|
vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
|
|
test_bit(ATM_VF_READY, &vcc->flags))
|
|
goto out;
|
|
}
|
|
vcc = NULL;
|
|
out:
|
|
read_unlock(&vcc_sklist_lock);
|
|
return vcc;
|
|
}
|
|
|
|
static int list_vccs(int vci)
|
|
{
|
|
struct hlist_head *head;
|
|
struct atm_vcc *vcc;
|
|
struct hlist_node *node;
|
|
struct sock *s;
|
|
int num_found = 0;
|
|
int i;
|
|
|
|
read_lock(&vcc_sklist_lock);
|
|
if (vci != 0){
|
|
head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
|
|
sk_for_each(s, node, head) {
|
|
num_found ++;
|
|
vcc = atm_sk(s);
|
|
printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n",
|
|
vcc->dev->number,
|
|
vcc->vpi,
|
|
vcc->vci);
|
|
}
|
|
} else {
|
|
for(i = 0; i < VCC_HTABLE_SIZE; i++){
|
|
head = &vcc_hash[i];
|
|
sk_for_each(s, node, head) {
|
|
num_found ++;
|
|
vcc = atm_sk(s);
|
|
printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n",
|
|
vcc->dev->number,
|
|
vcc->vpi,
|
|
vcc->vci);
|
|
}
|
|
}
|
|
}
|
|
read_unlock(&vcc_sklist_lock);
|
|
return num_found;
|
|
}
|
|
|
|
static void release_vccs(struct atm_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
write_lock_irq(&vcc_sklist_lock);
|
|
for (i = 0; i < VCC_HTABLE_SIZE; i++) {
|
|
struct hlist_head *head = &vcc_hash[i];
|
|
struct hlist_node *node, *tmp;
|
|
struct sock *s;
|
|
struct atm_vcc *vcc;
|
|
|
|
sk_for_each_safe(s, node, tmp, head) {
|
|
vcc = atm_sk(s);
|
|
if (vcc->dev == dev) {
|
|
vcc_release_async(vcc, -EPIPE);
|
|
sk_del_node_init(s);
|
|
}
|
|
}
|
|
}
|
|
write_unlock_irq(&vcc_sklist_lock);
|
|
}
|
|
|
|
|
|
static int popen(struct atm_vcc *vcc)
|
|
{
|
|
struct solos_card *card = vcc->dev->dev_data;
|
|
struct sk_buff *skb;
|
|
struct pkt_hdr *header;
|
|
|
|
if (vcc->qos.aal != ATM_AAL5) {
|
|
dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
|
|
vcc->qos.aal);
|
|
return -EINVAL;
|
|
}
|
|
|
|
skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
|
|
if (!skb && net_ratelimit()) {
|
|
dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
|
|
return -ENOMEM;
|
|
}
|
|
header = (void *)skb_put(skb, sizeof(*header));
|
|
|
|
header->size = cpu_to_le16(0);
|
|
header->vpi = cpu_to_le16(vcc->vpi);
|
|
header->vci = cpu_to_le16(vcc->vci);
|
|
header->type = cpu_to_le16(PKT_POPEN);
|
|
|
|
fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
|
|
|
|
set_bit(ATM_VF_ADDR, &vcc->flags);
|
|
set_bit(ATM_VF_READY, &vcc->flags);
|
|
list_vccs(0);
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pclose(struct atm_vcc *vcc)
|
|
{
|
|
struct solos_card *card = vcc->dev->dev_data;
|
|
struct sk_buff *skb;
|
|
struct pkt_hdr *header;
|
|
|
|
skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
|
|
if (!skb) {
|
|
dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
|
|
return;
|
|
}
|
|
header = (void *)skb_put(skb, sizeof(*header));
|
|
|
|
header->size = cpu_to_le16(0);
|
|
header->vpi = cpu_to_le16(vcc->vpi);
|
|
header->vci = cpu_to_le16(vcc->vci);
|
|
header->type = cpu_to_le16(PKT_PCLOSE);
|
|
|
|
fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
|
|
|
|
clear_bit(ATM_VF_ADDR, &vcc->flags);
|
|
clear_bit(ATM_VF_READY, &vcc->flags);
|
|
|
|
/* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
|
|
tasklet has finished processing any incoming packets (and, more to
|
|
the point, using the vcc pointer). */
|
|
tasklet_unlock_wait(&card->tlet);
|
|
return;
|
|
}
|
|
|
|
static int print_buffer(struct sk_buff *buf)
|
|
{
|
|
int len,i;
|
|
char msg[500];
|
|
char item[10];
|
|
|
|
len = buf->len;
|
|
for (i = 0; i < len; i++){
|
|
if(i % 8 == 0)
|
|
sprintf(msg, "%02X: ", i);
|
|
|
|
sprintf(item,"%02X ",*(buf->data + i));
|
|
strcat(msg, item);
|
|
if(i % 8 == 7) {
|
|
sprintf(item, "\n");
|
|
strcat(msg, item);
|
|
printk(KERN_DEBUG "%s", msg);
|
|
}
|
|
}
|
|
if (i % 8 != 0) {
|
|
sprintf(item, "\n");
|
|
strcat(msg, item);
|
|
printk(KERN_DEBUG "%s", msg);
|
|
}
|
|
printk(KERN_DEBUG "\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
|
|
struct atm_vcc *vcc)
|
|
{
|
|
int old_len;
|
|
unsigned long flags;
|
|
|
|
SKB_CB(skb)->vcc = vcc;
|
|
|
|
spin_lock_irqsave(&card->tx_queue_lock, flags);
|
|
old_len = skb_queue_len(&card->tx_queue[port]);
|
|
skb_queue_tail(&card->tx_queue[port], skb);
|
|
if (!old_len)
|
|
card->tx_mask |= (1 << port);
|
|
spin_unlock_irqrestore(&card->tx_queue_lock, flags);
|
|
|
|
/* Theoretically we could just schedule the tasklet here, but
|
|
that introduces latency we don't want -- it's noticeable */
|
|
if (!old_len)
|
|
fpga_tx(card);
|
|
}
|
|
|
|
static uint32_t fpga_tx(struct solos_card *card)
|
|
{
|
|
uint32_t tx_pending, card_flags;
|
|
uint32_t tx_started = 0;
|
|
struct sk_buff *skb;
|
|
struct atm_vcc *vcc;
|
|
unsigned char port;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&card->tx_lock, flags);
|
|
|
|
card_flags = ioread32(card->config_regs + FLAGS_ADDR);
|
|
/*
|
|
* The queue lock is required for _writing_ to tx_mask, but we're
|
|
* OK to read it here without locking. The only potential update
|
|
* that we could race with is in fpga_queue() where it sets a bit
|
|
* for a new port... but it's going to call this function again if
|
|
* it's doing that, anyway.
|
|
*/
|
|
tx_pending = card->tx_mask & ~card_flags;
|
|
|
|
for (port = 0; tx_pending; tx_pending >>= 1, port++) {
|
|
if (tx_pending & 1) {
|
|
struct sk_buff *oldskb = card->tx_skb[port];
|
|
if (oldskb)
|
|
pci_unmap_single(card->dev, SKB_CB(oldskb)->dma_addr,
|
|
oldskb->len, PCI_DMA_TODEVICE);
|
|
|
|
spin_lock(&card->tx_queue_lock);
|
|
skb = skb_dequeue(&card->tx_queue[port]);
|
|
if (!skb)
|
|
card->tx_mask &= ~(1 << port);
|
|
spin_unlock(&card->tx_queue_lock);
|
|
|
|
if (skb && !card->using_dma) {
|
|
memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
|
|
tx_started |= 1 << port;
|
|
oldskb = skb; /* We're done with this skb already */
|
|
} else if (skb && card->using_dma) {
|
|
SKB_CB(skb)->dma_addr = pci_map_single(card->dev, skb->data,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
iowrite32(SKB_CB(skb)->dma_addr,
|
|
card->config_regs + TX_DMA_ADDR(port));
|
|
}
|
|
|
|
if (!oldskb)
|
|
continue;
|
|
|
|
/* Clean up and free oldskb now it's gone */
|
|
if (atmdebug) {
|
|
dev_info(&card->dev->dev, "Transmitted: port %d\n",
|
|
port);
|
|
print_buffer(oldskb);
|
|
}
|
|
|
|
vcc = SKB_CB(oldskb)->vcc;
|
|
|
|
if (vcc) {
|
|
atomic_inc(&vcc->stats->tx);
|
|
solos_pop(vcc, oldskb);
|
|
} else
|
|
dev_kfree_skb_irq(oldskb);
|
|
|
|
}
|
|
}
|
|
/* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
|
|
if (tx_started)
|
|
iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
|
|
|
|
spin_unlock_irqrestore(&card->tx_lock, flags);
|
|
return card_flags;
|
|
}
|
|
|
|
static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
|
|
{
|
|
struct solos_card *card = vcc->dev->dev_data;
|
|
struct pkt_hdr *header;
|
|
int pktlen;
|
|
|
|
pktlen = skb->len;
|
|
if (pktlen > (BUF_SIZE - sizeof(*header))) {
|
|
dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
|
|
solos_pop(vcc, skb);
|
|
return 0;
|
|
}
|
|
|
|
if (!skb_clone_writable(skb, sizeof(*header))) {
|
|
int expand_by = 0;
|
|
int ret;
|
|
|
|
if (skb_headroom(skb) < sizeof(*header))
|
|
expand_by = sizeof(*header) - skb_headroom(skb);
|
|
|
|
ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
|
|
if (ret) {
|
|
dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
|
|
solos_pop(vcc, skb);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
header = (void *)skb_push(skb, sizeof(*header));
|
|
|
|
/* This does _not_ include the size of the header */
|
|
header->size = cpu_to_le16(pktlen);
|
|
header->vpi = cpu_to_le16(vcc->vpi);
|
|
header->vci = cpu_to_le16(vcc->vci);
|
|
header->type = cpu_to_le16(PKT_DATA);
|
|
|
|
fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct atmdev_ops fpga_ops = {
|
|
.open = popen,
|
|
.close = pclose,
|
|
.ioctl = NULL,
|
|
.getsockopt = NULL,
|
|
.setsockopt = NULL,
|
|
.send = psend,
|
|
.send_oam = NULL,
|
|
.phy_put = NULL,
|
|
.phy_get = NULL,
|
|
.change_qos = NULL,
|
|
.proc_read = NULL,
|
|
.owner = THIS_MODULE
|
|
};
|
|
|
|
static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
int err;
|
|
uint16_t fpga_ver;
|
|
uint8_t major_ver, minor_ver;
|
|
uint32_t data32;
|
|
struct solos_card *card;
|
|
|
|
card = kzalloc(sizeof(*card), GFP_KERNEL);
|
|
if (!card)
|
|
return -ENOMEM;
|
|
|
|
card->dev = dev;
|
|
init_waitqueue_head(&card->fw_wq);
|
|
init_waitqueue_head(&card->param_wq);
|
|
|
|
err = pci_enable_device(dev);
|
|
if (err) {
|
|
dev_warn(&dev->dev, "Failed to enable PCI device\n");
|
|
goto out;
|
|
}
|
|
|
|
err = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
|
|
if (err) {
|
|
dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
|
|
goto out;
|
|
}
|
|
|
|
err = pci_request_regions(dev, "solos");
|
|
if (err) {
|
|
dev_warn(&dev->dev, "Failed to request regions\n");
|
|
goto out;
|
|
}
|
|
|
|
card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
|
|
if (!card->config_regs) {
|
|
dev_warn(&dev->dev, "Failed to ioremap config registers\n");
|
|
goto out_release_regions;
|
|
}
|
|
card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
|
|
if (!card->buffers) {
|
|
dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
|
|
goto out_unmap_config;
|
|
}
|
|
|
|
if (reset) {
|
|
iowrite32(1, card->config_regs + FPGA_MODE);
|
|
data32 = ioread32(card->config_regs + FPGA_MODE);
|
|
|
|
iowrite32(0, card->config_regs + FPGA_MODE);
|
|
data32 = ioread32(card->config_regs + FPGA_MODE);
|
|
}
|
|
|
|
data32 = ioread32(card->config_regs + FPGA_VER);
|
|
fpga_ver = (data32 & 0x0000FFFF);
|
|
major_ver = ((data32 & 0xFF000000) >> 24);
|
|
minor_ver = ((data32 & 0x00FF0000) >> 16);
|
|
card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
|
|
if (card->fpga_version > LEGACY_BUFFERS)
|
|
card->buffer_size = BUF_SIZE;
|
|
else
|
|
card->buffer_size = OLD_BUF_SIZE;
|
|
dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
|
|
major_ver, minor_ver, fpga_ver);
|
|
|
|
if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
|
|
db_fpga_upgrade || db_firmware_upgrade)) {
|
|
dev_warn(&dev->dev,
|
|
"FPGA too old; cannot upgrade flash. Use JTAG.\n");
|
|
fpga_upgrade = firmware_upgrade = 0;
|
|
db_fpga_upgrade = db_firmware_upgrade = 0;
|
|
}
|
|
|
|
if (card->fpga_version >= DMA_SUPPORTED){
|
|
card->using_dma = 1;
|
|
} else {
|
|
card->using_dma = 0;
|
|
/* Set RX empty flag for all ports */
|
|
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
|
|
}
|
|
|
|
data32 = ioread32(card->config_regs + PORTS);
|
|
card->nr_ports = (data32 & 0x000000FF);
|
|
|
|
pci_set_drvdata(dev, card);
|
|
|
|
tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
|
|
spin_lock_init(&card->tx_lock);
|
|
spin_lock_init(&card->tx_queue_lock);
|
|
spin_lock_init(&card->cli_queue_lock);
|
|
spin_lock_init(&card->param_queue_lock);
|
|
INIT_LIST_HEAD(&card->param_queue);
|
|
|
|
err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
|
|
"solos-pci", card);
|
|
if (err) {
|
|
dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
|
|
goto out_unmap_both;
|
|
}
|
|
|
|
iowrite32(1, card->config_regs + IRQ_EN_ADDR);
|
|
|
|
if (fpga_upgrade)
|
|
flash_upgrade(card, 0);
|
|
|
|
if (firmware_upgrade)
|
|
flash_upgrade(card, 1);
|
|
|
|
if (db_fpga_upgrade)
|
|
flash_upgrade(card, 2);
|
|
|
|
if (db_firmware_upgrade)
|
|
flash_upgrade(card, 3);
|
|
|
|
err = atm_init(card, &dev->dev);
|
|
if (err)
|
|
goto out_free_irq;
|
|
|
|
return 0;
|
|
|
|
out_free_irq:
|
|
iowrite32(0, card->config_regs + IRQ_EN_ADDR);
|
|
free_irq(dev->irq, card);
|
|
tasklet_kill(&card->tlet);
|
|
|
|
out_unmap_both:
|
|
pci_set_drvdata(dev, NULL);
|
|
pci_iounmap(dev, card->config_regs);
|
|
out_unmap_config:
|
|
pci_iounmap(dev, card->buffers);
|
|
out_release_regions:
|
|
pci_release_regions(dev);
|
|
out:
|
|
kfree(card);
|
|
return err;
|
|
}
|
|
|
|
static int atm_init(struct solos_card *card, struct device *parent)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < card->nr_ports; i++) {
|
|
struct sk_buff *skb;
|
|
struct pkt_hdr *header;
|
|
|
|
skb_queue_head_init(&card->tx_queue[i]);
|
|
skb_queue_head_init(&card->cli_queue[i]);
|
|
|
|
card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
|
|
if (!card->atmdev[i]) {
|
|
dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
|
|
atm_remove(card);
|
|
return -ENODEV;
|
|
}
|
|
if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
|
|
dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
|
|
if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
|
|
dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
|
|
|
|
dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
|
|
|
|
card->atmdev[i]->ci_range.vpi_bits = 8;
|
|
card->atmdev[i]->ci_range.vci_bits = 16;
|
|
card->atmdev[i]->dev_data = card;
|
|
card->atmdev[i]->phy_data = (void *)(unsigned long)i;
|
|
atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_UNKNOWN);
|
|
|
|
skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
|
|
if (!skb) {
|
|
dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
|
|
continue;
|
|
}
|
|
|
|
header = (void *)skb_put(skb, sizeof(*header));
|
|
|
|
header->size = cpu_to_le16(0);
|
|
header->vpi = cpu_to_le16(0);
|
|
header->vci = cpu_to_le16(0);
|
|
header->type = cpu_to_le16(PKT_STATUS);
|
|
|
|
fpga_queue(card, i, skb, NULL);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void atm_remove(struct solos_card *card)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < card->nr_ports; i++) {
|
|
if (card->atmdev[i]) {
|
|
struct sk_buff *skb;
|
|
|
|
dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
|
|
|
|
sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
|
|
atm_dev_deregister(card->atmdev[i]);
|
|
|
|
skb = card->rx_skb[i];
|
|
if (skb) {
|
|
pci_unmap_single(card->dev, SKB_CB(skb)->dma_addr,
|
|
RX_DMA_SIZE, PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(skb);
|
|
}
|
|
skb = card->tx_skb[i];
|
|
if (skb) {
|
|
pci_unmap_single(card->dev, SKB_CB(skb)->dma_addr,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb(skb);
|
|
}
|
|
while ((skb = skb_dequeue(&card->tx_queue[i])))
|
|
dev_kfree_skb(skb);
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
static void fpga_remove(struct pci_dev *dev)
|
|
{
|
|
struct solos_card *card = pci_get_drvdata(dev);
|
|
|
|
/* Disable IRQs */
|
|
iowrite32(0, card->config_regs + IRQ_EN_ADDR);
|
|
|
|
/* Reset FPGA */
|
|
iowrite32(1, card->config_regs + FPGA_MODE);
|
|
(void)ioread32(card->config_regs + FPGA_MODE);
|
|
|
|
atm_remove(card);
|
|
|
|
free_irq(dev->irq, card);
|
|
tasklet_kill(&card->tlet);
|
|
|
|
/* Release device from reset */
|
|
iowrite32(0, card->config_regs + FPGA_MODE);
|
|
(void)ioread32(card->config_regs + FPGA_MODE);
|
|
|
|
pci_iounmap(dev, card->buffers);
|
|
pci_iounmap(dev, card->config_regs);
|
|
|
|
pci_release_regions(dev);
|
|
pci_disable_device(dev);
|
|
|
|
pci_set_drvdata(dev, NULL);
|
|
kfree(card);
|
|
}
|
|
|
|
static struct pci_device_id fpga_pci_tbl[] __devinitdata = {
|
|
{ 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
|
|
|
|
static struct pci_driver fpga_driver = {
|
|
.name = "solos",
|
|
.id_table = fpga_pci_tbl,
|
|
.probe = fpga_probe,
|
|
.remove = fpga_remove,
|
|
};
|
|
|
|
|
|
static int __init solos_pci_init(void)
|
|
{
|
|
printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
|
|
return pci_register_driver(&fpga_driver);
|
|
}
|
|
|
|
static void __exit solos_pci_exit(void)
|
|
{
|
|
pci_unregister_driver(&fpga_driver);
|
|
printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
|
|
}
|
|
|
|
module_init(solos_pci_init);
|
|
module_exit(solos_pci_exit);
|