mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 11:51:27 +00:00
1f4a0244ff
The PFC configuration is not cleared until the device is reset. This has not been a problem because setting DCB attributes forced a hardware reset. Now that we no longer require this reset to occur PFC remains configured even after being disabled until the device is reset. This removes a goto in the PFC hardware set routines for 82598 and 82599 devices that was short circuiting the clear. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
339 lines
9.4 KiB
C
339 lines
9.4 KiB
C
/*******************************************************************************
|
|
|
|
Intel 10 Gigabit PCI Express Linux driver
|
|
Copyright(c) 1999 - 2011 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Contact Information:
|
|
Linux NICS <linux.nics@intel.com>
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*******************************************************************************/
|
|
|
|
#include "ixgbe.h"
|
|
#include "ixgbe_type.h"
|
|
#include "ixgbe_dcb.h"
|
|
#include "ixgbe_dcb_82598.h"
|
|
|
|
/**
|
|
* ixgbe_dcb_config_packet_buffers_82598 - Configure packet buffers
|
|
* @hw: pointer to hardware structure
|
|
* @dcb_config: pointer to ixgbe_dcb_config structure
|
|
*
|
|
* Configure packet buffers for DCB mode.
|
|
*/
|
|
static s32 ixgbe_dcb_config_packet_buffers_82598(struct ixgbe_hw *hw, u8 rx_pba)
|
|
{
|
|
s32 ret_val = 0;
|
|
u32 value = IXGBE_RXPBSIZE_64KB;
|
|
u8 i = 0;
|
|
|
|
/* Setup Rx packet buffer sizes */
|
|
switch (rx_pba) {
|
|
case pba_80_48:
|
|
/* Setup the first four at 80KB */
|
|
value = IXGBE_RXPBSIZE_80KB;
|
|
for (; i < 4; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), value);
|
|
/* Setup the last four at 48KB...don't re-init i */
|
|
value = IXGBE_RXPBSIZE_48KB;
|
|
/* Fall Through */
|
|
case pba_equal:
|
|
default:
|
|
for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), value);
|
|
|
|
/* Setup Tx packet buffer sizes */
|
|
for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i),
|
|
IXGBE_TXPBSIZE_40KB);
|
|
}
|
|
break;
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
|
|
* @hw: pointer to hardware structure
|
|
* @dcb_config: pointer to ixgbe_dcb_config structure
|
|
*
|
|
* Configure Rx Data Arbiter and credits for each traffic class.
|
|
*/
|
|
s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
|
|
u16 *refill,
|
|
u16 *max,
|
|
u8 *prio_type)
|
|
{
|
|
u32 reg = 0;
|
|
u32 credit_refill = 0;
|
|
u32 credit_max = 0;
|
|
u8 i = 0;
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_RUPPBMR) | IXGBE_RUPPBMR_MQA;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RUPPBMR, reg);
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
|
|
/* Enable Arbiter */
|
|
reg &= ~IXGBE_RMCS_ARBDIS;
|
|
/* Enable Receive Recycle within the BWG */
|
|
reg |= IXGBE_RMCS_RRM;
|
|
/* Enable Deficit Fixed Priority arbitration*/
|
|
reg |= IXGBE_RMCS_DFP;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
|
|
|
|
/* Configure traffic class credits and priority */
|
|
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
|
|
credit_refill = refill[i];
|
|
credit_max = max[i];
|
|
|
|
reg = credit_refill | (credit_max << IXGBE_RT2CR_MCL_SHIFT);
|
|
|
|
if (prio_type[i] == prio_link)
|
|
reg |= IXGBE_RT2CR_LSP;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RT2CR(i), reg);
|
|
}
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
|
|
reg |= IXGBE_RDRXCTL_RDMTS_1_2;
|
|
reg |= IXGBE_RDRXCTL_MPBEN;
|
|
reg |= IXGBE_RDRXCTL_MCEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
/* Make sure there is enough descriptors before arbitration */
|
|
reg &= ~IXGBE_RXCTRL_DMBYPS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
|
|
* @hw: pointer to hardware structure
|
|
* @dcb_config: pointer to ixgbe_dcb_config structure
|
|
*
|
|
* Configure Tx Descriptor Arbiter and credits for each traffic class.
|
|
*/
|
|
s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
|
|
u16 *refill,
|
|
u16 *max,
|
|
u8 *bwg_id,
|
|
u8 *prio_type)
|
|
{
|
|
u32 reg, max_credits;
|
|
u8 i;
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_DPMCS);
|
|
|
|
/* Enable arbiter */
|
|
reg &= ~IXGBE_DPMCS_ARBDIS;
|
|
/* Enable DFP and Recycle mode */
|
|
reg |= (IXGBE_DPMCS_TDPAC | IXGBE_DPMCS_TRM);
|
|
reg |= IXGBE_DPMCS_TSOEF;
|
|
/* Configure Max TSO packet size 34KB including payload and headers */
|
|
reg |= (0x4 << IXGBE_DPMCS_MTSOS_SHIFT);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_DPMCS, reg);
|
|
|
|
/* Configure traffic class credits and priority */
|
|
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
|
|
max_credits = max[i];
|
|
reg = max_credits << IXGBE_TDTQ2TCCR_MCL_SHIFT;
|
|
reg |= refill[i];
|
|
reg |= (u32)(bwg_id[i]) << IXGBE_TDTQ2TCCR_BWG_SHIFT;
|
|
|
|
if (prio_type[i] == prio_group)
|
|
reg |= IXGBE_TDTQ2TCCR_GSP;
|
|
|
|
if (prio_type[i] == prio_link)
|
|
reg |= IXGBE_TDTQ2TCCR_LSP;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDTQ2TCCR(i), reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
|
|
* @hw: pointer to hardware structure
|
|
* @dcb_config: pointer to ixgbe_dcb_config structure
|
|
*
|
|
* Configure Tx Data Arbiter and credits for each traffic class.
|
|
*/
|
|
s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
|
|
u16 *refill,
|
|
u16 *max,
|
|
u8 *bwg_id,
|
|
u8 *prio_type)
|
|
{
|
|
u32 reg;
|
|
u8 i;
|
|
|
|
reg = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
|
|
/* Enable Data Plane Arbiter */
|
|
reg &= ~IXGBE_PDPMCS_ARBDIS;
|
|
/* Enable DFP and Transmit Recycle Mode */
|
|
reg |= (IXGBE_PDPMCS_TPPAC | IXGBE_PDPMCS_TRM);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_PDPMCS, reg);
|
|
|
|
/* Configure traffic class credits and priority */
|
|
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
|
|
reg = refill[i];
|
|
reg |= (u32)(max[i]) << IXGBE_TDPT2TCCR_MCL_SHIFT;
|
|
reg |= (u32)(bwg_id[i]) << IXGBE_TDPT2TCCR_BWG_SHIFT;
|
|
|
|
if (prio_type[i] == prio_group)
|
|
reg |= IXGBE_TDPT2TCCR_GSP;
|
|
|
|
if (prio_type[i] == prio_link)
|
|
reg |= IXGBE_TDPT2TCCR_LSP;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDPT2TCCR(i), reg);
|
|
}
|
|
|
|
/* Enable Tx packet buffer division */
|
|
reg = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
|
|
reg |= IXGBE_DTXCTL_ENDBUBD;
|
|
IXGBE_WRITE_REG(hw, IXGBE_DTXCTL, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_dcb_config_pfc_82598 - Config priority flow control
|
|
* @hw: pointer to hardware structure
|
|
* @dcb_config: pointer to ixgbe_dcb_config structure
|
|
*
|
|
* Configure Priority Flow Control for each traffic class.
|
|
*/
|
|
s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
|
|
{
|
|
u32 reg, rx_pba_size;
|
|
u8 i;
|
|
|
|
if (pfc_en) {
|
|
/* Enable Transmit Priority Flow Control */
|
|
reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
|
|
reg &= ~IXGBE_RMCS_TFCE_802_3X;
|
|
/* correct the reporting of our flow control status */
|
|
reg |= IXGBE_RMCS_TFCE_PRIORITY;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
|
|
|
|
/* Enable Receive Priority Flow Control */
|
|
reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
reg &= ~IXGBE_FCTRL_RFCE;
|
|
reg |= IXGBE_FCTRL_RPFCE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg);
|
|
|
|
/* Configure pause time */
|
|
for (i = 0; i < (MAX_TRAFFIC_CLASS >> 1); i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), 0x68006800);
|
|
|
|
/* Configure flow control refresh threshold value */
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCRTV, 0x3400);
|
|
}
|
|
|
|
/*
|
|
* Configure flow control thresholds and enable priority flow control
|
|
* for each traffic class.
|
|
*/
|
|
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
|
|
int enabled = pfc_en & (1 << i);
|
|
rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
|
|
rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
|
|
reg = (rx_pba_size - hw->fc.low_water) << 10;
|
|
|
|
if (enabled == pfc_enabled_tx ||
|
|
enabled == pfc_enabled_full)
|
|
reg |= IXGBE_FCRTL_XONE;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), reg);
|
|
|
|
reg = (rx_pba_size - hw->fc.high_water) << 10;
|
|
if (enabled == pfc_enabled_tx ||
|
|
enabled == pfc_enabled_full)
|
|
reg |= IXGBE_FCRTH_FCEN;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_dcb_config_tc_stats_82598 - Configure traffic class statistics
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Configure queue statistics registers, all queues belonging to same traffic
|
|
* class uses a single set of queue statistics counters.
|
|
*/
|
|
s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
|
|
{
|
|
u32 reg = 0;
|
|
u8 i = 0;
|
|
u8 j = 0;
|
|
|
|
/* Receive Queues stats setting - 8 queues per statistics reg */
|
|
for (i = 0, j = 0; i < 15 && j < 8; i = i + 2, j++) {
|
|
reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i));
|
|
reg |= ((0x1010101) * j);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
|
|
reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i + 1));
|
|
reg |= ((0x1010101) * j);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i + 1), reg);
|
|
}
|
|
/* Transmit Queues stats setting - 4 queues per statistics reg */
|
|
for (i = 0; i < 8; i++) {
|
|
reg = IXGBE_READ_REG(hw, IXGBE_TQSMR(i));
|
|
reg |= ((0x1010101) * i);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TQSMR(i), reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_dcb_hw_config_82598 - Config and enable DCB
|
|
* @hw: pointer to hardware structure
|
|
* @dcb_config: pointer to ixgbe_dcb_config structure
|
|
*
|
|
* Configure dcb settings and enable dcb mode.
|
|
*/
|
|
s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw,
|
|
u8 rx_pba, u8 pfc_en, u16 *refill,
|
|
u16 *max, u8 *bwg_id, u8 *prio_type)
|
|
{
|
|
ixgbe_dcb_config_packet_buffers_82598(hw, rx_pba);
|
|
ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, prio_type);
|
|
ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
|
|
bwg_id, prio_type);
|
|
ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
|
|
bwg_id, prio_type);
|
|
ixgbe_dcb_config_pfc_82598(hw, pfc_en);
|
|
ixgbe_dcb_config_tc_stats_82598(hw);
|
|
|
|
return 0;
|
|
}
|