linux/drivers/net/wireless/ath/ath9k
David S. Miller c8ac18f200 Major changes:
iwlwifi:
 
 * more work for new devices (4165 / 8260)
 * cleanups / improvemnts in rate control
 * fixes for TDLS
 * major statistics work from Johannes - more to come
 * improvements for the fw error dump infrastructure
 * usual amount of small fixes here and there (scan, D0i3 etc...)
 * add support for beamforming
 * enable stuck queue detection for iwlmvm
 * a few fixes for EBS scan
 * fixes for various failure paths
 * improvements for TDLS Offchannel
 
 wil6210:
 
 * performance tuning
 * some AP features
 
 brcm80211:
 
 * rework some code in SDIO part of the brcmfmac driver related to
   suspend/resume that were found doing stress testing
 * in PCIe part scheduling of worker thread needed to be relaxed
 * minor fixes and exposing firmware revision information to
   user-space, ie. ethtool.
 
 mwifiex:
 
 * enhancements for change virtual interface handling
 * remove coupling between netdev and FW supported interface
   combination, now conversion from any type of supported interface
   types to any other type is possible
 * DFS support in AP mode
 
 ath9k:
 
 * fix calibration issues on some boards
 * Wake-on-WLAN improvements
 
 ath10k:
 
 * add support for qca6174 hardware
 * enable RX batching to reduce CPU load
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJU1fUoAAoJEG4XJFUm622bnjMH/25f2kyLAJSLJmiIhpEcYlNJ
 CJMAYsSTcqhKaMEbx742StUUDH3pa1oV4mQ5csVa2QJIsS90WzPpB1eRnNtQ69Nj
 89Zfwa6bbX0TXDgw1Aa28NewPY/3xWpCjI03HBQaMIncToWv3/dzNUr0bEmIuBds
 wsr5Y+fy80VKnkoXG7XzGFOqmxxFwNS+UF3M1WNtQ+xcr9rK3/LLxyWFy84S9UIe
 4lVOb+df91YFIJeLs28/hfTiRhvV0fWIbupGv8UhuBMho+F0dpLvra+3xksEqALu
 4+AzI0j9GjqFfMzbmRBcPcT4Rl37nLmvQ+7XokrFgAYS5zp7OGylOMU3nHyvkuY=
 =iL8v
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2015-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Major changes:

iwlwifi:

* more work for new devices (4165 / 8260)
* cleanups / improvemnts in rate control
* fixes for TDLS
* major statistics work from Johannes - more to come
* improvements for the fw error dump infrastructure
* usual amount of small fixes here and there (scan, D0i3 etc...)
* add support for beamforming
* enable stuck queue detection for iwlmvm
* a few fixes for EBS scan
* fixes for various failure paths
* improvements for TDLS Offchannel

wil6210:

* performance tuning
* some AP features

brcm80211:

* rework some code in SDIO part of the brcmfmac driver related to
  suspend/resume that were found doing stress testing
* in PCIe part scheduling of worker thread needed to be relaxed
* minor fixes and exposing firmware revision information to
  user-space, ie. ethtool.

mwifiex:

* enhancements for change virtual interface handling
* remove coupling between netdev and FW supported interface
  combination, now conversion from any type of supported interface
  types to any other type is possible
* DFS support in AP mode

ath9k:

* fix calibration issues on some boards
* Wake-on-WLAN improvements

ath10k:

* add support for qca6174 hardware
* enable RX batching to reduce CPU load

Conflicts:
	drivers/net/wireless/rtlwifi/pci.c

Conflict resolution is to get rid of the 'end' label and keep
the rest.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09 12:13:58 -08:00
..
ahb.c ath9k: Add HW IDs for QCA956x 2015-01-15 14:24:57 +02:00
ani.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
ani.h ath9k_hw: tweak noise immunity thresholds for older chipsets 2014-03-03 15:35:55 -05:00
antenna.c
ar953x_initvals.h ath9k: Update QCA953x initvals 2015-01-29 10:33:20 +02:00
ar955x_1p0_initvals.h ath9k: Update AR955x initvals 2015-01-29 10:33:21 +02:00
ar956x_initvals.h ath9k: Add initvals for QCA956x 2015-01-15 14:24:59 +02:00
ar5008_initvals.h
ar5008_phy.c ath9k: add power per-rate tables for AR9002 chips 2015-01-15 14:47:06 +02:00
ar9001_initvals.h
ar9002_calib.c ath9k_hw: start initial NF calibration after PA calibration on <AR9003 2014-10-27 14:16:18 -04:00
ar9002_hw.c
ar9002_initvals.h
ar9002_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9002_phy.c ath9k: For AR9271 chipsets, set count = 0 for endless samples. 2014-11-11 16:31:14 -05:00
ar9002_phy.h
ar9003_2p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9003_buffalo_initvals.h
ar9003_calib.c ath9k: Enable manual peak detect calibration 2015-01-29 10:33:25 +02:00
ar9003_eeprom.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
ar9003_eeprom.h
ar9003_hw.c ath9k: Add initvals for QCA956x 2015-01-15 14:24:59 +02:00
ar9003_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9003_mac.h
ar9003_mci.c
ar9003_mci.h
ar9003_paprd.c
ar9003_phy.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
ar9003_phy.h ath9k: Fix register definitions for QCA956x 2015-01-15 14:25:01 +02:00
ar9003_rtt.c
ar9003_rtt.h ath9k_hw: make support for PC-OEM cards optional 2014-10-27 14:16:18 -04:00
ar9003_wow.c ath9k: Choose correct rate for 2GHz channel 2015-02-06 08:39:42 +02:00
ar9330_1p1_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9340_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h ath9k: Fix ETSI compliance for AR9462 2.0 2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h
ar9485_initvals.h
ar9565_1p0_initvals.h
ar9565_1p1_initvals.h
ar9580_1p0_initvals.h ath9k: Update AR9580 initvals 2014-10-27 14:16:17 -04:00
ath9k.h ath9k: Simplify user pattern configuration 2015-02-03 15:31:08 +02:00
beacon.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
btcoex.c
btcoex.h
calib.c ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
calib.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
channel.c mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR 2014-11-19 18:46:09 +01:00
common-beacon.c Revert "ath9k: Calculate sleep duration" 2014-09-11 14:17:20 -04:00
common-beacon.h ath9k: move ath9k_beacon_config_ap common 2014-03-17 13:13:08 -04:00
common-debug.c ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-debug.h ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-init.c ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common-init.h ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common-spectral.c ath9k: Delete an unnecessary check before the function call "relay_close" 2015-02-06 08:49:22 +02:00
common-spectral.h ath9k: common-spectral: don't depend from ATH9K_DEBUGFS 2014-11-17 15:32:14 -05:00
common.c Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-11-19 15:38:48 -05:00
common.h ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
debug_sta.c ath9k: remove tid->paused flag 2014-04-30 11:42:35 -04:00
debug.c ath9k: Add a debugfs file for WOW 2015-02-03 15:31:07 +02:00
debug.h Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
dfs_debug.c
dfs_debug.h ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dfs.c ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dfs.h
dynack.c ath9k: fix getting tx duration for dynack 2014-09-30 13:17:48 -04:00
dynack.h ath9k: add dynamic ACK timeout estimation 2014-09-16 16:18:30 -04:00
eeprom_4k.c ath9k: add power per-rate tables for AR9002 chips 2015-01-15 14:47:06 +02:00
eeprom_9287.c ath9k: add power per-rate tables for AR9002 chips 2015-01-15 14:47:06 +02:00
eeprom_def.c ath9k: add power per-rate tables for AR9002 chips 2015-01-15 14:47:06 +02:00
eeprom.c
eeprom.h
gpio.c ath9k and ath9k_htc: rename variable "led_blink" 2015-01-27 20:06:27 +02:00
hif_usb.c ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P 2014-02-12 15:36:04 -05:00
hif_usb.h
htc_drv_beacon.c ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init 2014-03-17 13:13:09 -04:00
htc_drv_debug.c ath9k_htc: add spectral scan debug interface 2014-11-11 16:31:15 -05:00
htc_drv_gpio.c ath9k and ath9k_htc: rename variable "led_blink" 2015-01-27 20:06:27 +02:00
htc_drv_init.c ath9k and ath9k_htc: rename variable "led_blink" 2015-01-27 20:06:27 +02:00
htc_drv_main.c mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR 2014-11-19 18:46:09 +01:00
htc_drv_txrx.c ath9k_htc: process rx spectral packets 2014-11-11 16:31:15 -05:00
htc_hst.c ath9k_htc: remove dead code in error path of ath9k_htc_txcompletion_cb 2015-01-23 21:16:02 +02:00
htc_hst.h ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
htc.h ath9k and ath9k_htc: rename variable "led_blink" 2015-01-27 20:06:27 +02:00
hw-ops.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
hw.c ath9k: Register max WOW patterns 2015-02-03 15:31:10 +02:00
hw.h ath9k: Fix issues with WoW enable 2015-02-06 08:39:26 +02:00
init.c ath9k: Fix wow init/deinit 2015-02-03 15:31:03 +02:00
Kconfig ath9k_common: make sure DEBUG_FS and RELAY enabled 2014-11-19 15:50:04 -05:00
link.c cfg80211: remove "channel" from survey names 2015-01-08 15:27:52 +01:00
mac.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
mac.h ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
main.c Major changes: 2015-02-09 12:13:58 -08:00
Makefile ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
mci.c ath9k: Move caldata into channel context 2014-06-19 15:49:18 -04:00
mci.h
pci.c ath9k: Check WOW triggers properly 2015-02-03 15:31:04 +02:00
phy.h
recv.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
reg_wow.h ath9k: Fix issues with WoW enable 2015-02-06 08:39:26 +02:00
reg.h ath9k: Clear TSF2 properly 2015-02-06 08:39:37 +02:00
tx99.c ath9k: Unify reset API 2014-10-27 14:16:14 -04:00
wmi.c
wmi.h
wow.c ath9k: Register correct WOW details with mac80211 2015-02-06 08:39:21 +02:00
xmit.c ath9k: Fix no-ack frame status 2015-01-23 19:00:37 +02:00