mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 18:41:23 +00:00
bac22980b0
Pull input layer fixes from Dmitry Torokhov: "Fixes for v7 protocol for ALPS devices and few other driver fixes. Also users can request input events to be stamped with boot time timestamps, in addition to real and monotonic timestamps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: hil_kbd - fix incorrect use of init_completion Input: alps - v7: document the v7 touchpad packet protocol Input: alps - v7: fix finger counting for > 2 fingers on clickpads Input: alps - v7: sometimes a single touch is reported in mt[1] Input: alps - v7: ignore new packets Input: evdev - add CLOCK_BOOTTIME support Input: psmouse - expose drift duration for IBM trackpoints Input: stmpe - bias keypad columns properly Input: stmpe - enforce device tree only mode mfd: stmpe: add pull up/down register offsets for STMPE Input: optimize events_per_packet count calculation Input: edt-ft5x06 - fixed a macro coding style issue Input: gpio_keys - replace timer and workqueue with delayed workqueue Input: gpio_keys - allow separating gpio and irq in device tree
1309 lines
31 KiB
C
1309 lines
31 KiB
C
/*
|
|
* ST Microelectronics MFD: stmpe's driver
|
|
*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* License Terms: GNU General Public License, version 2
|
|
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/export.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include "stmpe.h"
|
|
|
|
static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
|
|
{
|
|
return stmpe->variant->enable(stmpe, blocks, true);
|
|
}
|
|
|
|
static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
|
|
{
|
|
return stmpe->variant->enable(stmpe, blocks, false);
|
|
}
|
|
|
|
static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = stmpe->ci->read_byte(stmpe, reg);
|
|
if (ret < 0)
|
|
dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
|
|
|
|
dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
|
|
{
|
|
int ret;
|
|
|
|
dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
|
|
|
|
ret = stmpe->ci->write_byte(stmpe, reg, val);
|
|
if (ret < 0)
|
|
dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = __stmpe_reg_read(stmpe, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret &= ~mask;
|
|
ret |= val;
|
|
|
|
return __stmpe_reg_write(stmpe, reg, ret);
|
|
}
|
|
|
|
static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
|
|
u8 *values)
|
|
{
|
|
int ret;
|
|
|
|
ret = stmpe->ci->read_block(stmpe, reg, length, values);
|
|
if (ret < 0)
|
|
dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
|
|
|
|
dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
|
|
stmpe_dump_bytes("stmpe rd: ", values, length);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
|
|
const u8 *values)
|
|
{
|
|
int ret;
|
|
|
|
dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
|
|
stmpe_dump_bytes("stmpe wr: ", values, length);
|
|
|
|
ret = stmpe->ci->write_block(stmpe, reg, length, values);
|
|
if (ret < 0)
|
|
dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* stmpe_enable - enable blocks on an STMPE device
|
|
* @stmpe: Device to work on
|
|
* @blocks: Mask of blocks (enum stmpe_block values) to enable
|
|
*/
|
|
int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&stmpe->lock);
|
|
ret = __stmpe_enable(stmpe, blocks);
|
|
mutex_unlock(&stmpe->lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(stmpe_enable);
|
|
|
|
/**
|
|
* stmpe_disable - disable blocks on an STMPE device
|
|
* @stmpe: Device to work on
|
|
* @blocks: Mask of blocks (enum stmpe_block values) to enable
|
|
*/
|
|
int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&stmpe->lock);
|
|
ret = __stmpe_disable(stmpe, blocks);
|
|
mutex_unlock(&stmpe->lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(stmpe_disable);
|
|
|
|
/**
|
|
* stmpe_reg_read() - read a single STMPE register
|
|
* @stmpe: Device to read from
|
|
* @reg: Register to read
|
|
*/
|
|
int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&stmpe->lock);
|
|
ret = __stmpe_reg_read(stmpe, reg);
|
|
mutex_unlock(&stmpe->lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(stmpe_reg_read);
|
|
|
|
/**
|
|
* stmpe_reg_write() - write a single STMPE register
|
|
* @stmpe: Device to write to
|
|
* @reg: Register to write
|
|
* @val: Value to write
|
|
*/
|
|
int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&stmpe->lock);
|
|
ret = __stmpe_reg_write(stmpe, reg, val);
|
|
mutex_unlock(&stmpe->lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(stmpe_reg_write);
|
|
|
|
/**
|
|
* stmpe_set_bits() - set the value of a bitfield in a STMPE register
|
|
* @stmpe: Device to write to
|
|
* @reg: Register to write
|
|
* @mask: Mask of bits to set
|
|
* @val: Value to set
|
|
*/
|
|
int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&stmpe->lock);
|
|
ret = __stmpe_set_bits(stmpe, reg, mask, val);
|
|
mutex_unlock(&stmpe->lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(stmpe_set_bits);
|
|
|
|
/**
|
|
* stmpe_block_read() - read multiple STMPE registers
|
|
* @stmpe: Device to read from
|
|
* @reg: First register
|
|
* @length: Number of registers
|
|
* @values: Buffer to write to
|
|
*/
|
|
int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&stmpe->lock);
|
|
ret = __stmpe_block_read(stmpe, reg, length, values);
|
|
mutex_unlock(&stmpe->lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(stmpe_block_read);
|
|
|
|
/**
|
|
* stmpe_block_write() - write multiple STMPE registers
|
|
* @stmpe: Device to write to
|
|
* @reg: First register
|
|
* @length: Number of registers
|
|
* @values: Values to write
|
|
*/
|
|
int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
|
|
const u8 *values)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&stmpe->lock);
|
|
ret = __stmpe_block_write(stmpe, reg, length, values);
|
|
mutex_unlock(&stmpe->lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(stmpe_block_write);
|
|
|
|
/**
|
|
* stmpe_set_altfunc()- set the alternate function for STMPE pins
|
|
* @stmpe: Device to configure
|
|
* @pins: Bitmask of pins to affect
|
|
* @block: block to enable alternate functions for
|
|
*
|
|
* @pins is assumed to have a bit set for each of the bits whose alternate
|
|
* function is to be changed, numbered according to the GPIOXY numbers.
|
|
*
|
|
* If the GPIO module is not enabled, this function automatically enables it in
|
|
* order to perform the change.
|
|
*/
|
|
int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
|
|
{
|
|
struct stmpe_variant_info *variant = stmpe->variant;
|
|
u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
|
|
int af_bits = variant->af_bits;
|
|
int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
|
|
int mask = (1 << af_bits) - 1;
|
|
u8 regs[8];
|
|
int af, afperreg, ret;
|
|
|
|
if (!variant->get_altfunc)
|
|
return 0;
|
|
|
|
afperreg = 8 / af_bits;
|
|
mutex_lock(&stmpe->lock);
|
|
|
|
ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
af = variant->get_altfunc(stmpe, block);
|
|
|
|
while (pins) {
|
|
int pin = __ffs(pins);
|
|
int regoffset = numregs - (pin / afperreg) - 1;
|
|
int pos = (pin % afperreg) * (8 / afperreg);
|
|
|
|
regs[regoffset] &= ~(mask << pos);
|
|
regs[regoffset] |= af << pos;
|
|
|
|
pins &= ~(1 << pin);
|
|
}
|
|
|
|
ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
|
|
|
|
out:
|
|
mutex_unlock(&stmpe->lock);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
|
|
|
|
/*
|
|
* GPIO (all variants)
|
|
*/
|
|
|
|
static struct resource stmpe_gpio_resources[] = {
|
|
/* Start and end filled dynamically */
|
|
{
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell stmpe_gpio_cell = {
|
|
.name = "stmpe-gpio",
|
|
.of_compatible = "st,stmpe-gpio",
|
|
.resources = stmpe_gpio_resources,
|
|
.num_resources = ARRAY_SIZE(stmpe_gpio_resources),
|
|
};
|
|
|
|
static const struct mfd_cell stmpe_gpio_cell_noirq = {
|
|
.name = "stmpe-gpio",
|
|
.of_compatible = "st,stmpe-gpio",
|
|
/* gpio cell resources consist of an irq only so no resources here */
|
|
};
|
|
|
|
/*
|
|
* Keypad (1601, 2401, 2403)
|
|
*/
|
|
|
|
static struct resource stmpe_keypad_resources[] = {
|
|
{
|
|
.name = "KEYPAD",
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "KEYPAD_OVER",
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell stmpe_keypad_cell = {
|
|
.name = "stmpe-keypad",
|
|
.of_compatible = "st,stmpe-keypad",
|
|
.resources = stmpe_keypad_resources,
|
|
.num_resources = ARRAY_SIZE(stmpe_keypad_resources),
|
|
};
|
|
|
|
/*
|
|
* STMPE801
|
|
*/
|
|
static const u8 stmpe801_regs[] = {
|
|
[STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID,
|
|
[STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL,
|
|
[STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA,
|
|
[STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN,
|
|
[STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN,
|
|
[STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR,
|
|
[STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN,
|
|
[STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA,
|
|
|
|
};
|
|
|
|
static struct stmpe_variant_block stmpe801_blocks[] = {
|
|
{
|
|
.cell = &stmpe_gpio_cell,
|
|
.irq = 0,
|
|
.block = STMPE_BLOCK_GPIO,
|
|
},
|
|
};
|
|
|
|
static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
|
|
{
|
|
.cell = &stmpe_gpio_cell_noirq,
|
|
.block = STMPE_BLOCK_GPIO,
|
|
},
|
|
};
|
|
|
|
static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
|
|
bool enable)
|
|
{
|
|
if (blocks & STMPE_BLOCK_GPIO)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct stmpe_variant_info stmpe801 = {
|
|
.name = "stmpe801",
|
|
.id_val = STMPE801_ID,
|
|
.id_mask = 0xffff,
|
|
.num_gpios = 8,
|
|
.regs = stmpe801_regs,
|
|
.blocks = stmpe801_blocks,
|
|
.num_blocks = ARRAY_SIZE(stmpe801_blocks),
|
|
.num_irqs = STMPE801_NR_INTERNAL_IRQS,
|
|
.enable = stmpe801_enable,
|
|
};
|
|
|
|
static struct stmpe_variant_info stmpe801_noirq = {
|
|
.name = "stmpe801",
|
|
.id_val = STMPE801_ID,
|
|
.id_mask = 0xffff,
|
|
.num_gpios = 8,
|
|
.regs = stmpe801_regs,
|
|
.blocks = stmpe801_blocks_noirq,
|
|
.num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq),
|
|
.enable = stmpe801_enable,
|
|
};
|
|
|
|
/*
|
|
* Touchscreen (STMPE811 or STMPE610)
|
|
*/
|
|
|
|
static struct resource stmpe_ts_resources[] = {
|
|
{
|
|
.name = "TOUCH_DET",
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.name = "FIFO_TH",
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static const struct mfd_cell stmpe_ts_cell = {
|
|
.name = "stmpe-ts",
|
|
.of_compatible = "st,stmpe-ts",
|
|
.resources = stmpe_ts_resources,
|
|
.num_resources = ARRAY_SIZE(stmpe_ts_resources),
|
|
};
|
|
|
|
/*
|
|
* STMPE811 or STMPE610
|
|
*/
|
|
|
|
static const u8 stmpe811_regs[] = {
|
|
[STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
|
|
[STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
|
|
[STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
|
|
[STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
|
|
[STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
|
|
[STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
|
|
[STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
|
|
[STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
|
|
[STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
|
|
[STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
|
|
[STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
|
|
[STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
|
|
[STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
|
|
[STMPE_IDX_GPEDR_MSB] = STMPE811_REG_GPIO_ED,
|
|
};
|
|
|
|
static struct stmpe_variant_block stmpe811_blocks[] = {
|
|
{
|
|
.cell = &stmpe_gpio_cell,
|
|
.irq = STMPE811_IRQ_GPIOC,
|
|
.block = STMPE_BLOCK_GPIO,
|
|
},
|
|
{
|
|
.cell = &stmpe_ts_cell,
|
|
.irq = STMPE811_IRQ_TOUCH_DET,
|
|
.block = STMPE_BLOCK_TOUCHSCREEN,
|
|
},
|
|
};
|
|
|
|
static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
|
|
bool enable)
|
|
{
|
|
unsigned int mask = 0;
|
|
|
|
if (blocks & STMPE_BLOCK_GPIO)
|
|
mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
|
|
|
|
if (blocks & STMPE_BLOCK_ADC)
|
|
mask |= STMPE811_SYS_CTRL2_ADC_OFF;
|
|
|
|
if (blocks & STMPE_BLOCK_TOUCHSCREEN)
|
|
mask |= STMPE811_SYS_CTRL2_TSC_OFF;
|
|
|
|
return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask,
|
|
enable ? 0 : mask);
|
|
}
|
|
|
|
static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
|
|
{
|
|
/* 0 for touchscreen, 1 for GPIO */
|
|
return block != STMPE_BLOCK_TOUCHSCREEN;
|
|
}
|
|
|
|
static struct stmpe_variant_info stmpe811 = {
|
|
.name = "stmpe811",
|
|
.id_val = 0x0811,
|
|
.id_mask = 0xffff,
|
|
.num_gpios = 8,
|
|
.af_bits = 1,
|
|
.regs = stmpe811_regs,
|
|
.blocks = stmpe811_blocks,
|
|
.num_blocks = ARRAY_SIZE(stmpe811_blocks),
|
|
.num_irqs = STMPE811_NR_INTERNAL_IRQS,
|
|
.enable = stmpe811_enable,
|
|
.get_altfunc = stmpe811_get_altfunc,
|
|
};
|
|
|
|
/* Similar to 811, except number of gpios */
|
|
static struct stmpe_variant_info stmpe610 = {
|
|
.name = "stmpe610",
|
|
.id_val = 0x0811,
|
|
.id_mask = 0xffff,
|
|
.num_gpios = 6,
|
|
.af_bits = 1,
|
|
.regs = stmpe811_regs,
|
|
.blocks = stmpe811_blocks,
|
|
.num_blocks = ARRAY_SIZE(stmpe811_blocks),
|
|
.num_irqs = STMPE811_NR_INTERNAL_IRQS,
|
|
.enable = stmpe811_enable,
|
|
.get_altfunc = stmpe811_get_altfunc,
|
|
};
|
|
|
|
/*
|
|
* STMPE1601
|
|
*/
|
|
|
|
static const u8 stmpe1601_regs[] = {
|
|
[STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
|
|
[STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
|
|
[STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
|
|
[STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
|
|
[STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
|
|
[STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
|
|
[STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
|
|
[STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
|
|
[STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
|
|
[STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
|
|
[STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB,
|
|
[STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
|
|
[STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
|
|
[STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
|
|
[STMPE_IDX_GPEDR_MSB] = STMPE1601_REG_GPIO_ED_MSB,
|
|
};
|
|
|
|
static struct stmpe_variant_block stmpe1601_blocks[] = {
|
|
{
|
|
.cell = &stmpe_gpio_cell,
|
|
.irq = STMPE1601_IRQ_GPIOC,
|
|
.block = STMPE_BLOCK_GPIO,
|
|
},
|
|
{
|
|
.cell = &stmpe_keypad_cell,
|
|
.irq = STMPE1601_IRQ_KEYPAD,
|
|
.block = STMPE_BLOCK_KEYPAD,
|
|
},
|
|
};
|
|
|
|
/* supported autosleep timeout delay (in msecs) */
|
|
static const int stmpe_autosleep_delay[] = {
|
|
4, 16, 32, 64, 128, 256, 512, 1024,
|
|
};
|
|
|
|
static int stmpe_round_timeout(int timeout)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
|
|
if (stmpe_autosleep_delay[i] >= timeout)
|
|
return i;
|
|
}
|
|
|
|
/*
|
|
* requests for delays longer than supported should not return the
|
|
* longest supported delay
|
|
*/
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
|
|
{
|
|
int ret;
|
|
|
|
if (!stmpe->variant->enable_autosleep)
|
|
return -ENOSYS;
|
|
|
|
mutex_lock(&stmpe->lock);
|
|
ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
|
|
mutex_unlock(&stmpe->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Both stmpe 1601/2403 support same layout for autosleep
|
|
*/
|
|
static int stmpe1601_autosleep(struct stmpe *stmpe,
|
|
int autosleep_timeout)
|
|
{
|
|
int ret, timeout;
|
|
|
|
/* choose the best available timeout */
|
|
timeout = stmpe_round_timeout(autosleep_timeout);
|
|
if (timeout < 0) {
|
|
dev_err(stmpe->dev, "invalid timeout\n");
|
|
return timeout;
|
|
}
|
|
|
|
ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
|
|
STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
|
|
timeout);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
|
|
STPME1601_AUTOSLEEP_ENABLE,
|
|
STPME1601_AUTOSLEEP_ENABLE);
|
|
}
|
|
|
|
static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
|
|
bool enable)
|
|
{
|
|
unsigned int mask = 0;
|
|
|
|
if (blocks & STMPE_BLOCK_GPIO)
|
|
mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
|
|
else
|
|
mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
|
|
|
|
if (blocks & STMPE_BLOCK_KEYPAD)
|
|
mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
|
|
else
|
|
mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
|
|
|
|
if (blocks & STMPE_BLOCK_PWM)
|
|
mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
|
|
else
|
|
mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
|
|
|
|
return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
|
|
enable ? mask : 0);
|
|
}
|
|
|
|
static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
|
|
{
|
|
switch (block) {
|
|
case STMPE_BLOCK_PWM:
|
|
return 2;
|
|
|
|
case STMPE_BLOCK_KEYPAD:
|
|
return 1;
|
|
|
|
case STMPE_BLOCK_GPIO:
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static struct stmpe_variant_info stmpe1601 = {
|
|
.name = "stmpe1601",
|
|
.id_val = 0x0210,
|
|
.id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
|
|
.num_gpios = 16,
|
|
.af_bits = 2,
|
|
.regs = stmpe1601_regs,
|
|
.blocks = stmpe1601_blocks,
|
|
.num_blocks = ARRAY_SIZE(stmpe1601_blocks),
|
|
.num_irqs = STMPE1601_NR_INTERNAL_IRQS,
|
|
.enable = stmpe1601_enable,
|
|
.get_altfunc = stmpe1601_get_altfunc,
|
|
.enable_autosleep = stmpe1601_autosleep,
|
|
};
|
|
|
|
/*
|
|
* STMPE1801
|
|
*/
|
|
static const u8 stmpe1801_regs[] = {
|
|
[STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID,
|
|
[STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW,
|
|
[STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW,
|
|
[STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW,
|
|
[STMPE_IDX_GPMR_LSB] = STMPE1801_REG_GPIO_MP_LOW,
|
|
[STMPE_IDX_GPSR_LSB] = STMPE1801_REG_GPIO_SET_LOW,
|
|
[STMPE_IDX_GPCR_LSB] = STMPE1801_REG_GPIO_CLR_LOW,
|
|
[STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW,
|
|
[STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW,
|
|
[STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW,
|
|
[STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW,
|
|
[STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
|
|
[STMPE_IDX_ISGPIOR_LSB] = STMPE1801_REG_INT_STA_GPIO_LOW,
|
|
};
|
|
|
|
static struct stmpe_variant_block stmpe1801_blocks[] = {
|
|
{
|
|
.cell = &stmpe_gpio_cell,
|
|
.irq = STMPE1801_IRQ_GPIOC,
|
|
.block = STMPE_BLOCK_GPIO,
|
|
},
|
|
{
|
|
.cell = &stmpe_keypad_cell,
|
|
.irq = STMPE1801_IRQ_KEYPAD,
|
|
.block = STMPE_BLOCK_KEYPAD,
|
|
},
|
|
};
|
|
|
|
static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
|
|
bool enable)
|
|
{
|
|
unsigned int mask = 0;
|
|
if (blocks & STMPE_BLOCK_GPIO)
|
|
mask |= STMPE1801_MSK_INT_EN_GPIO;
|
|
|
|
if (blocks & STMPE_BLOCK_KEYPAD)
|
|
mask |= STMPE1801_MSK_INT_EN_KPC;
|
|
|
|
return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
|
|
enable ? mask : 0);
|
|
}
|
|
|
|
static int stmpe1801_reset(struct stmpe *stmpe)
|
|
{
|
|
unsigned long timeout;
|
|
int ret = 0;
|
|
|
|
ret = __stmpe_set_bits(stmpe, STMPE1801_REG_SYS_CTRL,
|
|
STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
while (time_before(jiffies, timeout)) {
|
|
ret = __stmpe_reg_read(stmpe, STMPE1801_REG_SYS_CTRL);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
|
|
return 0;
|
|
usleep_range(100, 200);
|
|
}
|
|
return -EIO;
|
|
}
|
|
|
|
static struct stmpe_variant_info stmpe1801 = {
|
|
.name = "stmpe1801",
|
|
.id_val = STMPE1801_ID,
|
|
.id_mask = 0xfff0,
|
|
.num_gpios = 18,
|
|
.af_bits = 0,
|
|
.regs = stmpe1801_regs,
|
|
.blocks = stmpe1801_blocks,
|
|
.num_blocks = ARRAY_SIZE(stmpe1801_blocks),
|
|
.num_irqs = STMPE1801_NR_INTERNAL_IRQS,
|
|
.enable = stmpe1801_enable,
|
|
/* stmpe1801 do not have any gpio alternate function */
|
|
.get_altfunc = NULL,
|
|
};
|
|
|
|
/*
|
|
* STMPE24XX
|
|
*/
|
|
|
|
static const u8 stmpe24xx_regs[] = {
|
|
[STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
|
|
[STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
|
|
[STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
|
|
[STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
|
|
[STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
|
|
[STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
|
|
[STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
|
|
[STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
|
|
[STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
|
|
[STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
|
|
[STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB,
|
|
[STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB,
|
|
[STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
|
|
[STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
|
|
[STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
|
|
[STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
|
|
};
|
|
|
|
static struct stmpe_variant_block stmpe24xx_blocks[] = {
|
|
{
|
|
.cell = &stmpe_gpio_cell,
|
|
.irq = STMPE24XX_IRQ_GPIOC,
|
|
.block = STMPE_BLOCK_GPIO,
|
|
},
|
|
{
|
|
.cell = &stmpe_keypad_cell,
|
|
.irq = STMPE24XX_IRQ_KEYPAD,
|
|
.block = STMPE_BLOCK_KEYPAD,
|
|
},
|
|
};
|
|
|
|
static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
|
|
bool enable)
|
|
{
|
|
unsigned int mask = 0;
|
|
|
|
if (blocks & STMPE_BLOCK_GPIO)
|
|
mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
|
|
|
|
if (blocks & STMPE_BLOCK_KEYPAD)
|
|
mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
|
|
|
|
return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask,
|
|
enable ? mask : 0);
|
|
}
|
|
|
|
static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
|
|
{
|
|
switch (block) {
|
|
case STMPE_BLOCK_ROTATOR:
|
|
return 2;
|
|
|
|
case STMPE_BLOCK_KEYPAD:
|
|
return 1;
|
|
|
|
case STMPE_BLOCK_GPIO:
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static struct stmpe_variant_info stmpe2401 = {
|
|
.name = "stmpe2401",
|
|
.id_val = 0x0101,
|
|
.id_mask = 0xffff,
|
|
.num_gpios = 24,
|
|
.af_bits = 2,
|
|
.regs = stmpe24xx_regs,
|
|
.blocks = stmpe24xx_blocks,
|
|
.num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
|
|
.num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
|
|
.enable = stmpe24xx_enable,
|
|
.get_altfunc = stmpe24xx_get_altfunc,
|
|
};
|
|
|
|
static struct stmpe_variant_info stmpe2403 = {
|
|
.name = "stmpe2403",
|
|
.id_val = 0x0120,
|
|
.id_mask = 0xffff,
|
|
.num_gpios = 24,
|
|
.af_bits = 2,
|
|
.regs = stmpe24xx_regs,
|
|
.blocks = stmpe24xx_blocks,
|
|
.num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
|
|
.num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
|
|
.enable = stmpe24xx_enable,
|
|
.get_altfunc = stmpe24xx_get_altfunc,
|
|
.enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
|
|
};
|
|
|
|
static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
|
|
[STMPE610] = &stmpe610,
|
|
[STMPE801] = &stmpe801,
|
|
[STMPE811] = &stmpe811,
|
|
[STMPE1601] = &stmpe1601,
|
|
[STMPE1801] = &stmpe1801,
|
|
[STMPE2401] = &stmpe2401,
|
|
[STMPE2403] = &stmpe2403,
|
|
};
|
|
|
|
/*
|
|
* These devices can be connected in a 'no-irq' configuration - the irq pin
|
|
* is not used and the device cannot interrupt the CPU. Here we only list
|
|
* devices which support this configuration - the driver will fail probing
|
|
* for any devices not listed here which are configured in this way.
|
|
*/
|
|
static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
|
|
[STMPE801] = &stmpe801_noirq,
|
|
};
|
|
|
|
static irqreturn_t stmpe_irq(int irq, void *data)
|
|
{
|
|
struct stmpe *stmpe = data;
|
|
struct stmpe_variant_info *variant = stmpe->variant;
|
|
int num = DIV_ROUND_UP(variant->num_irqs, 8);
|
|
u8 israddr;
|
|
u8 isr[3];
|
|
int ret;
|
|
int i;
|
|
|
|
if (variant->id_val == STMPE801_ID) {
|
|
int base = irq_create_mapping(stmpe->domain, 0);
|
|
|
|
handle_nested_irq(base);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (variant->id_val == STMPE1801_ID)
|
|
israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
|
|
else
|
|
israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
|
|
|
|
ret = stmpe_block_read(stmpe, israddr, num, isr);
|
|
if (ret < 0)
|
|
return IRQ_NONE;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
int bank = num - i - 1;
|
|
u8 status = isr[i];
|
|
u8 clear;
|
|
|
|
status &= stmpe->ier[bank];
|
|
if (!status)
|
|
continue;
|
|
|
|
clear = status;
|
|
while (status) {
|
|
int bit = __ffs(status);
|
|
int line = bank * 8 + bit;
|
|
int nestedirq = irq_create_mapping(stmpe->domain, line);
|
|
|
|
handle_nested_irq(nestedirq);
|
|
status &= ~(1 << bit);
|
|
}
|
|
|
|
stmpe_reg_write(stmpe, israddr + i, clear);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void stmpe_irq_lock(struct irq_data *data)
|
|
{
|
|
struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
|
|
|
|
mutex_lock(&stmpe->irq_lock);
|
|
}
|
|
|
|
static void stmpe_irq_sync_unlock(struct irq_data *data)
|
|
{
|
|
struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
|
|
struct stmpe_variant_info *variant = stmpe->variant;
|
|
int num = DIV_ROUND_UP(variant->num_irqs, 8);
|
|
int i;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
u8 new = stmpe->ier[i];
|
|
u8 old = stmpe->oldier[i];
|
|
|
|
if (new == old)
|
|
continue;
|
|
|
|
stmpe->oldier[i] = new;
|
|
stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new);
|
|
}
|
|
|
|
mutex_unlock(&stmpe->irq_lock);
|
|
}
|
|
|
|
static void stmpe_irq_mask(struct irq_data *data)
|
|
{
|
|
struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
|
|
int offset = data->hwirq;
|
|
int regoffset = offset / 8;
|
|
int mask = 1 << (offset % 8);
|
|
|
|
stmpe->ier[regoffset] &= ~mask;
|
|
}
|
|
|
|
static void stmpe_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
|
|
int offset = data->hwirq;
|
|
int regoffset = offset / 8;
|
|
int mask = 1 << (offset % 8);
|
|
|
|
stmpe->ier[regoffset] |= mask;
|
|
}
|
|
|
|
static struct irq_chip stmpe_irq_chip = {
|
|
.name = "stmpe",
|
|
.irq_bus_lock = stmpe_irq_lock,
|
|
.irq_bus_sync_unlock = stmpe_irq_sync_unlock,
|
|
.irq_mask = stmpe_irq_mask,
|
|
.irq_unmask = stmpe_irq_unmask,
|
|
};
|
|
|
|
static int stmpe_irq_map(struct irq_domain *d, unsigned int virq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
struct stmpe *stmpe = d->host_data;
|
|
struct irq_chip *chip = NULL;
|
|
|
|
if (stmpe->variant->id_val != STMPE801_ID)
|
|
chip = &stmpe_irq_chip;
|
|
|
|
irq_set_chip_data(virq, stmpe);
|
|
irq_set_chip_and_handler(virq, chip, handle_edge_irq);
|
|
irq_set_nested_thread(virq, 1);
|
|
#ifdef CONFIG_ARM
|
|
set_irq_flags(virq, IRQF_VALID);
|
|
#else
|
|
irq_set_noprobe(virq);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq)
|
|
{
|
|
#ifdef CONFIG_ARM
|
|
set_irq_flags(virq, 0);
|
|
#endif
|
|
irq_set_chip_and_handler(virq, NULL, NULL);
|
|
irq_set_chip_data(virq, NULL);
|
|
}
|
|
|
|
static struct irq_domain_ops stmpe_irq_ops = {
|
|
.map = stmpe_irq_map,
|
|
.unmap = stmpe_irq_unmap,
|
|
.xlate = irq_domain_xlate_twocell,
|
|
};
|
|
|
|
static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
|
|
{
|
|
int base = 0;
|
|
int num_irqs = stmpe->variant->num_irqs;
|
|
|
|
stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
|
|
&stmpe_irq_ops, stmpe);
|
|
if (!stmpe->domain) {
|
|
dev_err(stmpe->dev, "Failed to create irqdomain\n");
|
|
return -ENOSYS;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stmpe_chip_init(struct stmpe *stmpe)
|
|
{
|
|
unsigned int irq_trigger = stmpe->pdata->irq_trigger;
|
|
int autosleep_timeout = stmpe->pdata->autosleep_timeout;
|
|
struct stmpe_variant_info *variant = stmpe->variant;
|
|
u8 icr = 0;
|
|
unsigned int id;
|
|
u8 data[2];
|
|
int ret;
|
|
|
|
ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
|
|
ARRAY_SIZE(data), data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
id = (data[0] << 8) | data[1];
|
|
if ((id & variant->id_mask) != variant->id_val) {
|
|
dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
|
|
|
|
/* Disable all modules -- subdrivers should enable what they need. */
|
|
ret = stmpe_disable(stmpe, ~0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (id == STMPE1801_ID) {
|
|
ret = stmpe1801_reset(stmpe);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (stmpe->irq >= 0) {
|
|
if (id == STMPE801_ID)
|
|
icr = STMPE801_REG_SYS_CTRL_INT_EN;
|
|
else
|
|
icr = STMPE_ICR_LSB_GIM;
|
|
|
|
/* STMPE801 doesn't support Edge interrupts */
|
|
if (id != STMPE801_ID) {
|
|
if (irq_trigger == IRQF_TRIGGER_FALLING ||
|
|
irq_trigger == IRQF_TRIGGER_RISING)
|
|
icr |= STMPE_ICR_LSB_EDGE;
|
|
}
|
|
|
|
if (irq_trigger == IRQF_TRIGGER_RISING ||
|
|
irq_trigger == IRQF_TRIGGER_HIGH) {
|
|
if (id == STMPE801_ID)
|
|
icr |= STMPE801_REG_SYS_CTRL_INT_HI;
|
|
else
|
|
icr |= STMPE_ICR_LSB_HIGH;
|
|
}
|
|
}
|
|
|
|
if (stmpe->pdata->autosleep) {
|
|
ret = stmpe_autosleep(stmpe, autosleep_timeout);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
|
|
}
|
|
|
|
static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
|
|
{
|
|
return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
|
|
NULL, 0, stmpe->domain);
|
|
}
|
|
|
|
static int stmpe_devices_init(struct stmpe *stmpe)
|
|
{
|
|
struct stmpe_variant_info *variant = stmpe->variant;
|
|
unsigned int platform_blocks = stmpe->pdata->blocks;
|
|
int ret = -EINVAL;
|
|
int i, j;
|
|
|
|
for (i = 0; i < variant->num_blocks; i++) {
|
|
struct stmpe_variant_block *block = &variant->blocks[i];
|
|
|
|
if (!(platform_blocks & block->block))
|
|
continue;
|
|
|
|
for (j = 0; j < block->cell->num_resources; j++) {
|
|
struct resource *res =
|
|
(struct resource *) &block->cell->resources[j];
|
|
|
|
/* Dynamically fill in a variant's IRQ. */
|
|
if (res->flags & IORESOURCE_IRQ)
|
|
res->start = res->end = block->irq + j;
|
|
}
|
|
|
|
platform_blocks &= ~block->block;
|
|
ret = stmpe_add_device(stmpe, block->cell);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (platform_blocks)
|
|
dev_warn(stmpe->dev,
|
|
"platform wants blocks (%#x) not present on variant",
|
|
platform_blocks);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void stmpe_of_probe(struct stmpe_platform_data *pdata,
|
|
struct device_node *np)
|
|
{
|
|
struct device_node *child;
|
|
|
|
pdata->id = of_alias_get_id(np, "stmpe-i2c");
|
|
if (pdata->id < 0)
|
|
pdata->id = -1;
|
|
|
|
pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0,
|
|
&pdata->irq_trigger);
|
|
if (gpio_is_valid(pdata->irq_gpio))
|
|
pdata->irq_over_gpio = 1;
|
|
else
|
|
pdata->irq_trigger = IRQF_TRIGGER_NONE;
|
|
|
|
of_property_read_u32(np, "st,autosleep-timeout",
|
|
&pdata->autosleep_timeout);
|
|
|
|
pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
|
|
|
|
for_each_child_of_node(np, child) {
|
|
if (!strcmp(child->name, "stmpe_gpio")) {
|
|
pdata->blocks |= STMPE_BLOCK_GPIO;
|
|
} else if (!strcmp(child->name, "stmpe_keypad")) {
|
|
pdata->blocks |= STMPE_BLOCK_KEYPAD;
|
|
} else if (!strcmp(child->name, "stmpe_touchscreen")) {
|
|
pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
|
|
} else if (!strcmp(child->name, "stmpe_adc")) {
|
|
pdata->blocks |= STMPE_BLOCK_ADC;
|
|
} else if (!strcmp(child->name, "stmpe_pwm")) {
|
|
pdata->blocks |= STMPE_BLOCK_PWM;
|
|
} else if (!strcmp(child->name, "stmpe_rotator")) {
|
|
pdata->blocks |= STMPE_BLOCK_ROTATOR;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Called from client specific probe routines */
|
|
int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
|
|
{
|
|
struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev);
|
|
struct device_node *np = ci->dev->of_node;
|
|
struct stmpe *stmpe;
|
|
int ret;
|
|
|
|
if (!pdata) {
|
|
if (!np)
|
|
return -EINVAL;
|
|
|
|
pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
stmpe_of_probe(pdata, np);
|
|
|
|
if (of_find_property(np, "interrupts", NULL) == NULL)
|
|
ci->irq = -1;
|
|
}
|
|
|
|
stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
|
|
if (!stmpe)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&stmpe->irq_lock);
|
|
mutex_init(&stmpe->lock);
|
|
|
|
stmpe->dev = ci->dev;
|
|
stmpe->client = ci->client;
|
|
stmpe->pdata = pdata;
|
|
stmpe->ci = ci;
|
|
stmpe->partnum = partnum;
|
|
stmpe->variant = stmpe_variant_info[partnum];
|
|
stmpe->regs = stmpe->variant->regs;
|
|
stmpe->num_gpios = stmpe->variant->num_gpios;
|
|
stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
|
|
if (!IS_ERR(stmpe->vcc)) {
|
|
ret = regulator_enable(stmpe->vcc);
|
|
if (ret)
|
|
dev_warn(ci->dev, "failed to enable VCC supply\n");
|
|
}
|
|
stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
|
|
if (!IS_ERR(stmpe->vio)) {
|
|
ret = regulator_enable(stmpe->vio);
|
|
if (ret)
|
|
dev_warn(ci->dev, "failed to enable VIO supply\n");
|
|
}
|
|
dev_set_drvdata(stmpe->dev, stmpe);
|
|
|
|
if (ci->init)
|
|
ci->init(stmpe);
|
|
|
|
if (pdata->irq_over_gpio) {
|
|
ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio,
|
|
GPIOF_DIR_IN, "stmpe");
|
|
if (ret) {
|
|
dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
stmpe->irq = gpio_to_irq(pdata->irq_gpio);
|
|
} else {
|
|
stmpe->irq = ci->irq;
|
|
}
|
|
|
|
if (stmpe->irq < 0) {
|
|
/* use alternate variant info for no-irq mode, if supported */
|
|
dev_info(stmpe->dev,
|
|
"%s configured in no-irq mode by platform data\n",
|
|
stmpe->variant->name);
|
|
if (!stmpe_noirq_variant_info[stmpe->partnum]) {
|
|
dev_err(stmpe->dev,
|
|
"%s does not support no-irq mode!\n",
|
|
stmpe->variant->name);
|
|
return -ENODEV;
|
|
}
|
|
stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
|
|
} else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) {
|
|
pdata->irq_trigger = irq_get_trigger_type(stmpe->irq);
|
|
}
|
|
|
|
ret = stmpe_chip_init(stmpe);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (stmpe->irq >= 0) {
|
|
ret = stmpe_irq_init(stmpe, np);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL,
|
|
stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT,
|
|
"stmpe", stmpe);
|
|
if (ret) {
|
|
dev_err(stmpe->dev, "failed to request IRQ: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = stmpe_devices_init(stmpe);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
dev_err(stmpe->dev, "failed to add children\n");
|
|
mfd_remove_devices(stmpe->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int stmpe_remove(struct stmpe *stmpe)
|
|
{
|
|
if (!IS_ERR(stmpe->vio))
|
|
regulator_disable(stmpe->vio);
|
|
if (!IS_ERR(stmpe->vcc))
|
|
regulator_disable(stmpe->vcc);
|
|
|
|
mfd_remove_devices(stmpe->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int stmpe_suspend(struct device *dev)
|
|
{
|
|
struct stmpe *stmpe = dev_get_drvdata(dev);
|
|
|
|
if (stmpe->irq >= 0 && device_may_wakeup(dev))
|
|
enable_irq_wake(stmpe->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stmpe_resume(struct device *dev)
|
|
{
|
|
struct stmpe *stmpe = dev_get_drvdata(dev);
|
|
|
|
if (stmpe->irq >= 0 && device_may_wakeup(dev))
|
|
disable_irq_wake(stmpe->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct dev_pm_ops stmpe_dev_pm_ops = {
|
|
.suspend = stmpe_suspend,
|
|
.resume = stmpe_resume,
|
|
};
|
|
#endif
|